Accuracy of patient-specific temporal implants using PEKK

The Biocompatibility and the Effect of Titanium and PEKK on the Osseointegration of Customized Facial Implants

The purpose of this study was to investigate the optimization of computer-aided design/computer-aided manufacturing (CAD/CAM) patient-specific implants for mandibular facial bone defects and compare the biocompatibility and osseointegration of machined titanium (Ma), Sandblasted/Large-grit/Acid-etched (SLA) titanium, and polyetherketoneketone (PEKK) facial implants. We hypothesized that the facial implants made of SLA titanium had superior osseointegration when applied to the gonial angle defect and prevented the senile atrophy of the bone. Histologic findings of the soft-tissue reaction, hard-tissue reaction, and bone-implant contact (BIC (%) of 24 Ma, SLA, and PEKK facial implants at 8 and 12 weeks were investigated. There was no statistical difference in the soft tissue reaction. Bone was formed below the periosteum in all facial implants at 12 weeks and the BIC values were significantly different at both 8 and 12 weeks (p < 0.05). Ma, SLA, and PEKK facial implants are biocompatible with osseointegration properties. SLA can enhance osseointegration and provoke minimal soft tissue reactions, making them the most suitable choice. They provide an excellent environment for bone regeneration and, over the long term, may prevent atrophy caused by an aging mandible. The bone formation between the lateral surface of the facial implant and periosteum may assist in osseointegration and stabilization.

Simulating the Morphological Changes of Facial Deformities after Using 3D-printed Polyether Ether Ketone Facial Implants

Background

Patient-specific implants (PSIs) have been presented as an effective solution for diseases that require reconstruction. PSIs are designed to precisely fit anatomical defects or deformities in terms of shape and size. In addition to the possibility of predicting the results of surgery regarding soft tissue changes.

Methods

A research sample consisting of 10 patients with facial deformities underwent maxillofacial reconstructive surgery between 2020 and 2021 in the Tishreen University Hospital, Syria. All patients underwent computed tomography scans; then, the design of the required facial implant was carried out, and the three-dimensional soft tissues were reconstructed using the ExoCad 3.0 program based on the computed tomography. The final form of the facial implant was printed from polyether ether ketone, and then surgical work was performed. The patients were followed up after 6 months. Then, a comparison was made between the virtual design and the real result.

Results

The absolute difference between the expected soft tissue changes result and the actual result did not exceed three-tenths for all patients, and only two of 10 patients had measurements higher than 20%.

Conclusions

This technique can be relied upon with the placement of implants to predict the outcome of the surgical procedure in terms of morphological changes in the facial soft tissues covering PSI polyether ether ketone. Therefore, it is possible to make a virtual design based on the cosmetic requirements of the patient.

Endoscopic-Assisted Forehead Augmentation with Polyetheretherketone (PEEK) Patient-Specific Implant (PSI) for Aesthetic Considerations

BACKGROUND

Forehead augmentation have become popular aesthetic procedures among Asians in recent years. However, the use of polyetheretherketone (PEEK) patient-specific implant (PSI) in the facial contouring surgery for aesthetic considerations is not well documented in the existing studies. The purpose of this study was to develop a novel method for forehead augmentation and assess the clinical outcomes and complications in patients who underwent forehead augmentation with PEEK PSI assisted by endoscopy.

METHODS

The PEEK PSIs were fabricated using the virtual surgical planning (VSP) and the computer-aided manufacturing (CAM) for each patient, preoperatively. The implant pockets were dissected in the subperiosteal plane, and PEEK PSIs were placed in their designed position and fixed assisting by endoscopy via small incision within the hairline. All patients were asked to complete the FACE-Q questionnaire before and 6 months after the operation. Pre- and postoperative demographics, photographs, and other clinical data of patients were collected and analyzed.

RESULTS

11 patients underwent forehead augmentation were enrolled in this study. All procedures were completed successfully with the help of endoscope. The average patient age was 30.63 ± 2.54 years. The mean thickness and size of PEEK PSI were 4.44 ± 1.77 mm and 38.43 ± 22.66 cm2, respectively. The mean operative time was 83.00 ± 29.44 min, and the mean postoperative follow-up period was 11.00 ± 6.50 months. No implant exposure, extrusion or removal were reported. The FACE-Q scores of patients in satisfaction with the forehead increased from 47.64 ± 7.15 to 78.81 ± 6.35.

CONCLUSIONS

PEEK PSIs can be prefabricated to achieve accurate remodeling of the frontal contour with good esthetic outcomes. The endoscope provides direct and magnified vision, which allow easy access to the supraorbital rim and lateral edge of the eyebrow arch and confirming the position of the implants without damaging nerves and vessels. Endoscopic-assisted forehead augmentation with PEEK PSI is safe and effective.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to the Table of contents or the online Instructions to Authors www.springer.com/00266 .

Sliding Flap for the Wide Upper Eyelid Margin Defect After Cancer Removal

BACKGROUND

Reconstruction of eyelid margin defects following resection of upper-eyelid skin malignancies is typically performed using a lower eyelid switch flap, including eyelash reconstruction. However, a subsequent procedure for flap separation, and prolonged swelling of the flap may occur as a complication.

OBJECTIVE

The authors performed anterior lamellar reconstruction using a sliding flap with excess upper eyelid skin, a procedure that is a less invasive and simpler.

MATERIALS AND METHODS

The authors performed anterior lamellar reconstruction using a sliding flap in 7 patients with full-thickness upper eyelid margin defect after skin cancer resection. The mean age of the patients was 76.0 years. The horizontal width of the defect in our cohort ranged from 11 to 25 mm and the vertical width ranged from 5 to 10 mm.

RESULTS

All the flaps and mucosal grafts were well taken, and none of the patients complained of lack of eyelash reconstruction. However, eyelid margin irregularity, possibly due to flap or mucosal graft contraction, was observed in 2 patients, and 1 patient developed keratoconjunctivitis.

CONCLUSIONS

The sliding flap technique is a minimally invasive and simple procedure for wide eyelid margin reconstruction. However, 2 patients developed eyelid margin irregularities and 1 patient developed keratoconjunctivitis. Those complications might have occurred owing to the condition of posterior lamellar reconstruction. Therefore, for the successful use of a sliding flap for anterior lamellar reconstruction, the form of the eyelid edge and the choice of posterior lamellar reconstruction are key considerations. In future, we plan to establish a better reconstructive technique by accumulating more evidence.

Reconstruction of Cranial Bone Defects Using Polyamide 12 Patient-Specific Implant: Long Term Follow Up

ABSTRACT

The main objective of this study was to evaluate the use of patient-specific polyamide 12 implants in cranial bone defect reconstruction.Ten patients who underwent prior decompression craniectomy were selected for the current study. Skull scanning by computerized tomography was performed and used to make virtual planning of the implants to be transformed into physical implant using selective laser sintering. Cranioplasty was performed through coronal surgical approach where cranial implants were fixated using 2.0-mm mini-screws, and plates. Patients follow-up was from 12 to 36 months. Glasgow Outcome Score recorded 1 (good recovery) for all patients. Patient and surgeon satisfaction for the esthetic outcome were measured using visual analog scale as mean of 10 ± 0 and 9 ± 1, respectively. Cranial symmetry index was calculated as mean score of 98% ± 1%, indicating highly accurate symmetry, and preoperative virtual planning and postoperative outcome were compared for accuracy analysis with a mean difference of 0.3197 ± 0.1649, which indicates high accuracy.Polyamide12 cranial implants seem to offer a promising option to cranial bone reconstruction with patient-specific implants. This study ensures proper cosmetic and clinical outcome.