Novel bilayer dissolving microneedle arrays with concentrated PLGA nano-microparticles for targeted intradermal delivery: Proof of concept

A quick paster type of soluble nanoparticle microneedle patch for the treatment of obesity

Obesity is a major public burden on the working population and induces chronic diseases. Its treatment often requires long-term medication, which makes patient compliance difficult. In this study, we reported the value of HORN-MN, which comprised a fast-soluble hyaluronic acid microneedle matrix and a weak acid-degradable oleanolic acid dimer of rosiglitazone nanoparticles. The results showed that the microneedles easily punctured the stratum corneum and dissolved in the dermis of the abdominal wall within 5 min, followed by the release of rosiglitazone nanoparticles. Thereafter, the nanoparticles were endocytosed by macrophages and white adipocytes, then degraded to oleanolic acid in the lysosomes, thereby, releasing rosiglitazone. Oleanolic acid significantly improved the inflammatory status of obese adipose tissue and promoted white adipocyte browning, and rosiglitazone significantly potentiated WAC browning. Accordingly, the patch demonstrated a remarkable obesity-reducing efficacy in mice. In conclusion, this study developed a quick paster type of soluble rosiglitazone nanoparticle microneedle for the treatment of obesity. This patch can be suitable for working people, with an evident obesity-reducing efficacy but no effect on skin integrity despite multiple administrations.

Novel nano-in-micro fabrication technique of diclofenac nanoparticles loaded microneedle patches for localised and systemic drug delivery

Diclofenac, a nonsteroidal anti-inflammatory drug, is commonly prescribed for managing osteoarthritis, rheumatoid arthritis, and post-surgical pain. However, oral administration of diclofenac often leads to adverse effects. This study introduces an innovative nano-in-micro approach to create diclofenac nanoparticle-loaded microneedle patches aimed at localised, sustained pain relief, circumventing the drawbacks of oral delivery. The nanoparticles were produced via wet-milling, achieving an average size of 200 nm, and then incorporated into microneedle patches. These patches showed improved skin penetration in ex vivo tests using Franz-cell setups compared to traditional diclofenac formulations. In vivo tests on rats revealed that the nanoparticle-loaded microneedle patches allowed for quick drug uptake and prolonged release, maintaining drug levels in tissues for up to 72 h. With a systemic bioavailability of 57 %, these patches prove to be an effective means of transdermal drug delivery. This study highlights the potential of this novel microneedle delivery system in enhancing the treatment of chronic pain with reduced systemic side effects.

Optimization of stereolithography 3D printing of microneedle micro-molds for ocular drug delivery

Microneedles (MN) have emerged as an innovative technology for drug delivery, offering a minimally invasive approach to administer therapeutic agents. Recent applications have included ocular drug delivery, requiring the manufacture of sub-millimeter needle arrays in a reproducible and reliable manner. The development of 3D printing technologies has facilitated the fabrication of MN via mold production, although there is a paucity of information available regarding how the printing parameters may influence crucial issues such as sharpness and penetration efficacy. In this study, we have developed and optimized a 3D-printed MN micro-mold using stereolithography (SLA) 3D printing to prepare a dissolving ocular MN patch. The effects of a range of parameters including aspect ratio, layer thickness, length, mold shape and printing orientation have been examined with regard to both architecture and printing accuracy of the MN micro-mold, while the effects of printing angle on needle fidelity was also examined for a range of basic shapes (conical, pyramidal and triangular pyramidal). Mechanical strength and in vitro penetration of the polymeric (PVP/PVA) MN patch produced from reverse molds fabricated using MN with a range of shapes and height, and aspect ratios were assessed, followed by ex vivo studies of penetration into excised scleral and corneal tissues. The optimization process identified the parameters required to produce MN with the sharpest tips and highest dimensional fidelity, while the ex vivo studies indicated that these optimized systems would penetrate the ocular tissue with minimal applied pressure, thereby allowing ease of patient self-administration.

Poly(acrylic acid)/Poly(vinyl alcohol) Microarray Patches for Continuous Transdermal Delivery of Levodopa and Carbidopa: In Vitro and In Vivo Studies

Levodopa (LD) has been the most efficacious medication and the gold standard therapy for Parkinson's disease (PD) for decades. However, its long-term administration is usually associated with motor complications, which are believed to be the result of the fluctuating pharmacokinetics of LD following oral administration. Duodopa® is the current option to offer a continuous delivery of LD and its decarboxylase inhibitor carbidopa (CD); however, its administration involves invasive surgical procedures, which could potentially lead to lifelong complications, such as infection. Recently, dissolving microarray patches (MAPs) have come to the fore as an alternative that can bypass the oral administration route in a minimally invasive way. This work explored the potential of using dissolving MAPs to deliver LD and CD across the skin. An acidic polymer poly(acrylic acid) (PAA) was used in the MAP fabrication to prevent the potential oxidation of LD at neutral pH. The drug contents of LD and CD in the formulated dissolving MAPs were 1.82 ± 0.24 and 0.47 ± 0.04 mg/patch, respectively. The in vivo pharmacokinetic study using female Sprague-Dawley® rats (Envigo RMS Holding Corp, Bicester, UK) demonstrated a simultaneous delivery of LD and CD and comparable AUC values between the dissolving MAPs and the oral LD/CD suspension. The relative bioavailability for the dissolving MAPs was calculated to be approximately 37.22%. Accordingly, this work highlights the use of dissolving MAPs as a minimally invasive approach which could potentially bypass the gastrointestinal pathway and deliver both drugs continuously without surgery.

Microneedle Delivery Platform Integrated with Codelivery Nanoliposomes for Effective and Safe Androgenetic Alopecia Treatment

Although topical application of minoxidil is a widely used, FDA-approved therapy for androgenetic alopecia (AGA) treatment, it suffers from low bioavailability, the requirement for frequent long-term use, and side effects. With a similar structure as minoxidil, kopexil and kopyrrol are less toxic and have been commercialized, but show an inferior hair regeneration effect compared to minoxidil. Herein, we developed a hyaluronic acid (HA)-based dissolvable microneedles (MNs) delivery platform integrated with kopexil and kopyrrol coencapsulated nanoliposomes (KK-NLPs) to effectively and safely treat AGA. Facilitated by nanoliposomes and MNs, the encapsulated KK-NLPs performed efficient skin penetration and enhanced cellular internalization into human dermal papilla cells. Furthermore, within the target cells, the codelivered kopexil and kopyrrol show synergistic effects by orchestrating an upregulation in the expression of Ki67, β-catenin, vascular endothelial growth factor (VEGF), and CD31. These molecular responses collectively foster cell proliferation, migration, and antioxidative effects, thereby facilitating the expedited progression of hair follicles (HFs) into the anagen phase and promoting peripheral angiogenesis. Notably, the KK-NLPs-integrated MNs treatment group exhibits noteworthy enhanced hair regeneration in vivo, with identical or superior therapeutic effects at a much lower dosage than that of minoxidil. These results suggest the great potential of this kopexil and kopyrrol codelivery nanoliposomes-integrated MNs platform for AGA treatment in a safe and efficient way.

Recent progress of polymeric microneedle-assisted long-acting transdermal drug delivery

Microneedle (MN)-assisted drug delivery technology has gained increasing attention over the past two decades. Its advantages of self-management and being minimally invasive could allow this technology to be an alternative to hypodermic needles. MNs can penetrate the stratum corneum and deliver active ingredients to the body through the dermal tissue in a controlled and sustained release. Long-acting polymeric MNs can reduce administration frequency to improve patient compliance and therapeutic outcomes, especially in the management of chronic diseases. In addition, long-acting MNs could avoid gastrointestinal reactions and reduce side effects, which has potential value for clinical application. In this paper, advances in design strategies and applications of long-acting polymeric MNs are reviewed. We also discuss the challenges in scale manufacture and regulations of polymeric MN systems. These two aspects will accelerate the effective clinical translation of MN products.

Microneedle-assisted percutaneous delivery of methotrexate-loaded nanoparticles enabling sustained anti-inflammatory effects in psoriasis therapy

Methotrexate (MTX) is one of the first-line drugs used for the treatment of moderate to severe psoriasis. However, low bioavailability and systemic side effects of traditional oral and injectable MTX greatly limit its clinical application. Delivering MTX using dissolving microneedles (MNs) into psoriasis-like skin lesion could improve the in situ therapeutic effects with higher bioavailability and less side effects. Here, we propose a novel therapeutic approach for psoriasis involving MN-assisted percutaneous delivery of chitosan-coated hollow mesoporous silica nanoparticles containing MTX (MTX@HMSN/CS). The MTX@HMSN/CS-loaded MNs were strong enough to successfully penetrate the psoriasiform thickened epidermis, allowing MTX@HMSN/CS to be accurately delivered to the site of skin lesion following the rapid dissolution of MNs. MTX was then released continuously from HMSN/CS for at least one week to maintain effective therapeutic drug concentration for skin lesion with long-term anti-proliferative and anti-inflammatory effects. Incubation with MTX@HMSN/CS not only inhibited the proliferation of human immortalized keratinocytes (HaCaT cells), but also significantly reduced the expression of proinflammatory cytokines and chemokines. In addition, MTX@HMSN/CS-loaded MNs showed better efficacy in alleviating psoriasis-like skin inflammation than MTX-loaded MNs at the same dose. Compared to psoriasiform mice treated with 15.8 μg MTX-loaded MNs every day, 47.4 μg MTX@HMSN/CS-loaded MNs reduce the frequency of treatment to once every 3 days and achieve comparable amelioration. Therefore, MTX@HMSN/CS loaded MNs are a promising treatment strategy for psoriasis due to their durability, efficacy, convenience, and safety in relieving psoriasis-like skin inflammation.

Advancements in transdermal drug delivery: A comprehensive review of physical penetration enhancement techniques

Transdermal drug administration has grown in popularity in the pharmaceutical research community due to its potential to improve drug bioavailability, compliance among patients, and therapeutic effectiveness. To overcome the substantial barrier posed by the stratum corneum (SC) and promote drug absorption within the skin, various physical penetration augmentation approaches have been devised. This review article delves into popular physical penetration augmentation techniques, which include sonophoresis, iontophoresis, magnetophoresis, thermophoresis, needle-free injection, and microneedles (MNs) Sonophoresis is a technique that uses low-frequency ultrasonic waves to break the skin's barrier characteristics, therefore improving drug transport and distribution. In contrast, iontophoresis uses an applied electric current to push charged molecules of drugs inside the skin, effectively enhancing medication absorption. Magnetophoresis uses magnetic fields to drive drug carriers into the dermis, a technology that has shown promise in aiding targeted medication delivery. Thermophoresis is the regulated heating of the skin in order to improve drug absorption, particularly with thermally sensitive drug carriers. Needle-free injection technologies, such as jet injectors (JIs) and microprojection arrays, offer another option by producing temporary small pore sizes in the skin, facilitating painless and effective drug delivery. MNs are a painless, minimally invasive method, easy to self-administration, as well as high drug bioavailability. This study focuses on the underlying processes, current breakthroughs, and limitations connected with all of these approaches, with an emphasis on their applicability in diverse therapeutic areas. Finally, a thorough knowledge of these physical enhancement approaches and their incorporation into pharmaceutical research has the potential to revolutionize drug delivery, providing more efficient and secure treatment choices for a wide range of health-related diseases.

Development of stretchable microneedle arrays via single-step digital light-processing printing for delivery of rhodamine B into skin tissue

This paper introduces a novel approach for loading and releasing Rhodamine B (RhB) into the skin using minimally-invasive microneedle technology developed through digital light-processing (DLP) printing. Notably, this process involves the direct 3D fabrication of rigid microneedle arrays affixed to a flexible patch, marking a pioneering application of DLP printing in this context. The stretchable and durable design of the microneedle substrate enables it to adapt to dynamic movements associated with human activities. Moreover, the microneedle features a pore on each side of the pyramid needle, effectively optimizing its drug-loading capabilities. Results indicate that the microneedle patch can withstand up to 50 % strain without failure and successfully penetrates rat skin. In vitro drug release profiles, conducted through artificial and rat skin, were observed over a 70 h period. This study establishes the potential of a simple manufacturing process for the creation of pore-designed microneedle arrays with a stretchable substrate, showcasing their viability in transdermal drug delivery applications.

The Necessity to Investigate In Vivo Fate of Nanoparticle-Loaded Dissolving Microneedles

Transdermal drug delivery systems are rapidly gaining prominence and have found widespread application in the treatment of numerous diseases. However, they encounter the challenge of a low transdermal absorption rate. Microneedles can overcome the stratum corneum barrier to enhance the transdermal absorption rate. Among various types of microneedles, nanoparticle-loaded dissolving microneedles (DMNs) present a unique combination of advantages, leveraging the strengths of DMNs (high payload, good mechanical properties, and easy fabrication) and nanocarriers (satisfactory solubilization capacity and a controlled release profile). Consequently, they hold considerable clinical application potential in the precision medicine era. Despite this promise, no nanoparticle-loaded DMN products have been approved thus far. The lack of understanding regarding their in vivo fate represents a critical bottleneck impeding the clinical translation of relevant products. This review aims to elucidate the current research status of the in vivo fate of nanoparticle-loaded DMNs and elaborate the necessity to investigate the in vivo fate of nanoparticle-loaded DMNs from diverse aspects. Furthermore, it offers insights into potential entry points for research into the in vivo fate of nanoparticle-loaded DMNs, aiming to foster further advancements in this field.

Advances in biomedical systems based on microneedles: design, fabrication, and application

Wearable devices have become prevalent in biomedical studies due to their convenient portability and potential utility in biomarker monitoring for healthcare. Accessing interstitial fluid (ISF) across the skin barrier, microneedle (MN) is a promising minimally invasive wearable technology for transdermal sensing and drug delivery. MN has the potential to overcome the limitations of conventional transdermal drug administration, making it another prospective mode of drug delivery after oral and injectable. Subsequently, combining MN with multiple sensing approaches has led to its extensive application to detect biomarkers in ISF. In this context, employing MN platforms and control schemes to merge diagnostic and therapeutic capabilities into theranostic systems will facilitate on-demand therapy and point-of-care diagnostics, paving the way for future MN technologies. A comprehensive analysis of the growing advances of microneedles in biomedical systems is presented in this review to summarize the latest studies for academics in the field and to offer for reference the issues that need to be addressed in MN application for healthcare. Covering an array of novel studies, we discuss the following main topics: classification of microneedles in the biomedical field, considerations of MN design, current applications of microneedles in diagnosis and therapy, and the regulatory landscape and prospects of microneedles for biomedical applications. This review sheds light on the significance of microneedle-based innovations, presenting an analysis of their potential implications and contributions to the community of wearable healthcare technologies. The review provides a comprehensive understanding of the field's current state and potential, making it a valuable resource for academics and clinicians seeking to harness the full potential of MN applications.

A Bilayer Microarray Patch (MAP) for HIV Pre-Exposure Prophylaxis: The Role of MAP Designs and Formulation Composition in Enhancing Long-Acting Drug Delivery

Microarray patches (MAPs) have shown great potential for efficient and patient-friendly drug delivery through the skin; however, improving their delivery efficiency for long-acting drug release remains a significant challenge. This research provides an overview of novel strategies aimed at enhancing the efficiency of MAP delivery of micronized cabotegravir sodium (CAB Na) for HIV pre-exposure prophylaxis (PrEP). The refinement of microneedle design parameters, including needle length, shape, density, and arrangement, and the formulation properties, such as solubility, viscosity, polymer molecular weight, and stability, are crucial for improving penetration and release profiles. Additionally, a bilayer MAP optimization step was conducted by diluting the CAB Na polymeric mixture to localize the drug into the tips of the needles to enable rapid drug deposition into the skin following MAP application. Six MAP designs were analyzed and investigated with regard to delivery efficiency into the skin in ex vivo and in vivo studies. The improved MAP design and formulations were found to be robust and had more than 30% in vivo delivery efficiency, with plasma levels several-fold above the therapeutic concentration over a month. Repeated weekly dosing demonstrated the robustness of MAPs in delivering a consistent and sustained dose of CAB. In summary, CAB Na MAPs were able to deliver therapeutically relevant levels of drug.

Advances in Formulations of Microneedle System for Rheumatoid Arthritis Treatment

Rheumatoid arthritis (RA) is a systemic autoimmune disease characterized by chronic joint inflammation, eventually leading to severe disability and premature death. At present, the treatment of RA is mainly to reduce inflammation, swelling, and pain. Commonly used drugs are non-steroidal anti-inflammatory drugs (NSAIDs), glucocorticoids, and disease-modifying anti-rheumatic drugs (DMARDs). These drugs lack specificity and require long-term, high-dose administration, which can cause serious adverse effects. In addition, the oral, intravenous, and intra-articular injections will reduce patient compliance, resulting in high cost and low bioavailability. Due to these limitations, microneedles (MNs) have emerged as a new strategy to efficiently localize the drugs in inflamed joints for the treatment of RA. MNs can overcome the cuticle barrier of the skin without stimulating nerves and blood vessels. Which can increase patient compliance, improve bioavailability, and avoid systemic circulation. This review summarizes and evaluates the application of MNs in RA, especially dissolving MNs (DMNs). We encourage the use of MNs to treat RA, by describing the general properties of MNs, materials, preparation technology, drug release mechanism, and advantages. Furthermore, we discussed the biological safety, development prospects, and future challenges of MNs, hoping to provide a new strategy for the treatment of RA.

Battle of the milky way: Lymphatic targeted drug delivery for pathogen eradication

Many viruses, bacteria, and parasites rely on the lymphatic system for survival, replication, and dissemination. While conventional anti-infectives can combat infection-causing agents in the bloodstream, they do not reach the lymphatic system to eradicate the pathogens harboured there. This can result in ineffective drug exposure and reduce treatment effectiveness. By developing effective lymphatic delivery strategies for antiviral, antibacterial, and antiparasitic drugs, their systemic pharmacokinetics may be improved, as would their ability to reach their target pathogens within the lymphatics, thereby improving clinical outcomes in a variety of acute and chronic infections with lymphatic involvement (e.g., acquired immunodeficiency syndrome, tuberculosis, and filariasis). Here, we discuss approaches to targeting anti-infective drugs to the intestinal and dermal lymphatics, aiming to eliminate pathogen reservoirs and interfere with their survival and reproduction inside the lymphatic system. These include optimized lipophilic prodrugs and drug delivery systems that promote lymphatic transport after oral and dermal drug intake. For intestinal lymphatic delivery via the chylomicron pathway, molecules should have logP values >5 and long-chain triglyceride solubilities >50 mg/g, and for dermal lymphatic delivery via interstitial lymphatic drainage, nanoparticle formulations with particle size between 10 and 100 nm are generally preferred. Insight from this review may promote new and improved therapeutic solutions for pathogen eradication and combating infective diseases, as lymphatic system involvement in pathogen dissemination and drug resistance has been neglected compared to other pathways leading to treatment failure.

Long-acting microneedle formulations

The minimally-invasive and painless nature of microneedle (MN) application has enabled the technology to obviate many issues with injectable drug delivery. MNs not only administer therapeutics directly into the dermal and ocular space, but they can also control the release profile of the active compound over a desired period. To enable prolonged delivery of payloads, various MN types have been proposed and evaluated, including dissolving MNs, polymeric MNs loaded or coated with nanoparticles, fast-separable MNs hollow MNs, and hydrogel MNs. These intricate yet intelligent delivery platforms provide an attractive approach to decrease side effects and administration frequency, thus offer the potential to increase patient compliance. In this review, MN formulations that are loaded with various therapeutics for long-acting delivery to address the clinical needs of a myriad of diseases are discussed. We also highlight the design aspects, such as polymer selection and MN geometry, in addition to computational and mathematical modeling of MNs that are necessary to help streamline and develop MNs with high translational value and clinical impact. Finally, up-scale manufacturing and regulatory hurdles along with potential avenues that require further research to bring MN technology to the market are carefully considered. It is hoped that this review will provide insight to formulators and clinicians that the judicious selection of materials in tandem with refined design may offer an elegant approach to achieve sustained delivery of payloads through the simple and painless application of a MN patch.

Transdermal drug delivery via microneedles for musculoskeletal systems

As the population is ageing and lifestyle is changing, the prevalence of musculoskeletal (MSK) disorders is gradually increasing with each passing year, posing a serious threat to the health and quality of the public, especially the elderly. However, currently prevalent treatments for MSK disorders, mainly administered orally and by injection, are not targeted to the specific lesion, resulting in low efficacy along with a series of local and systemic adverse effects. Microneedle (MN) patches loaded with micron-sized needle array, combining the advantages of oral administration and local injection, have become a potentially novel strategy for the administration and treatment of MSK diseases. In this review, we briefly introduce the basics of MNs and focus on the main characteristics of the MSK systems and various types of MN-based transdermal drug delivery (TDD) systems. We emphasize the progress and broad applications of MN-based transdermal drug delivery (TDD) for MSK systems, including osteoporosis, nutritional rickets and some other typical types of arthritis and muscular damage, and in closing summarize the future prospects and challenges of MNs application.

Recent progress in PLGA-based microneedle-mediated transdermal drug and vaccine delivery

Microneedles (MNs) have recently been found to have applications in drug, vitamin, protein and vaccine delivery. Polymeric MN arrays continue to attract increasing attention due to their capability to bypass the skin's stratum corneum (SC) barrier with minimal invasiveness. These carriers can achieve the targeted intradermal delivery of drugs and vaccines and improve their transdermal delivery level. As a nontoxic FDA-approved copolymer, polylactic glycolic acid (PLGA) has good biocompatibility and biodegradability. Currently, PLGA-based MNs have a noticeable tendency to be utilized as a delivery system. This study focuses on the most recent advances in PLGA-based MNs. Both PLGA nanoparticle-based MNs and PLGA matrix-based MNs, created for the delivery of vaccines, drugs, proteins and other therapeutic agents, are discussed. The paper also discusses the various types of MNs and their potential applications. Finally, the prospects and challenges of PLGA-based MNs are reviewed.

Ex Vivo Transdermal Delivery of Nicotinamide Mononucleotide Using Polyvinyl Alcohol Microneedles

Nicotinamide mononucleotide (NMN), which has recently been spotlighted as an anti-aging agent, is a precursor of the coenzyme nicotinamide adenine dinucleotide that plays an important role in intracellular redox reactions. NMN capsules for oral administration currently on the market have a problem in that they are almost fully metabolized in the stomach and liver and excreted as nicotinamide. Therefore, there is a need to develop a patient-friendly delivery method that can improve the bioavailability of NMN. For this purpose, various polyvinyl alcohol (PVA)-based microneedle patches were fabricated to develop a transdermal delivery system for NMN. First, the molecular weight effect of PVA on the shape and microstructure of microneedles was studied. After selecting the optimal molecular weight PVA, the swelling of the microneedles and the ex vivo release of NMN were studied. The effect of carboxymethyl cellulose (CMC) and dimethyl sulfoxide on NMN release was also investigated. The highest NMN release of 91.94% in 18 h was obtained using a 9.5 kDa molecular weight PVA microneedle containing NMN and CMC.

Microneedle-assisted transdermal delivery of nanoparticles: Recent insights and prospects

Transdermal delivery of drugs offers an interesting alternative for the administration of molecules that present certain troubles when delivered by the oral route. It can produce systemic effects or perform a local action when the formulation exerts an optimal controlled drug release or a targeted delivery to the specific cell type or site. It also avoids several inconveniences of the oral administration such as the hepatic first pass effect, gastric pH-induced hydrolysis, drug malabsorption because of certain diseases or surgeries, and unpleasant organoleptic properties. Nanomedicine and microneedle array patches (MAPs) are two of the trendiest delivery systems applied to transdermal research nowadays. However, the skin is a protective barrier and nanoparticles (NPs) cannot pass through the intact stratum corneum. The association of NPs and MAPs (NPs@MAPs) work synergistically, since MAPs assist NPs to bypass the outer skin layers, and NPs contribute to the system providing controlled drug release and targeted delivery. Vaccination and tailored therapies have been proposed as fields where both NPs and MAPs have great potential due to inherent characteristics. MAPs conception and easy use could allow self-administration and therefore facilitate mass vaccination campaigns in undeveloped areas with weak healthcare services. Additionally, nanomedicine is being explored as a platform to personalize therapies in such an important field as oncology. In this work we show recent insights that prove the benefits of NPs@MAPs association and analyze the prospects and the discrete interest of the industry in NPs@MAPs, evaluating different limiting steps that restricts NPs@MAPs translation to the clinical practice. This article is categorized under: Nanotechnology Approaches to Biology > NA Therapeutic Approaches and Drug Discovery > NA.

Microneedle array patches for allergen-specific immunotherapy

The incidence of allergies has been steadily increasing in recent years. Allergen-specific immunotherapy (AIT) represents the only approach capable of inducing long-term immune tolerance toward allergens. However, the clinical success of AIT is limited by efficacy or safety concerns related to the administration route. Therapeutic delivery in the skin appears promising, given the presence of immune cells in the skin and the relatively low level of systemic distribution that occurs with this delivery method. However, the stratum corneum greatly limits this route. In this regard, the use of microneedles has been proposed to improve the delivery of therapeutics into the skin. In this review, we discuss recent developments in the use of microneedles for AIT, highlighting avenues for future research.

Hydrogel-forming microarray patches with solid dispersion reservoirs for transdermal long-acting microdepot delivery of a hydrophobic drug

Hydrogel-forming microarray patches (HF-MAPs) are used to circumvent the skin barrier and facilitate the noninvasive transdermal delivery of many hydrophilic substances. However, their use in the delivery of hydrophobic agents is a challenging task. This work demonstrates, for the first time, the successful transdermal long-acting delivery of the hydrophobic atorvastatin (ATR) via HF-MAPs using poly(ethylene)glycol (PEG)-based solid dispersion (SD) reservoirs. PEG-based SDs of ATR were able to completely dissolve within 90 s in vitro. Ex vivo results showed that 2.05 ± 0.23 mg of ATR/0.5 cm² patch was delivered to the receiver compartment of Franz cells after 24 h. The in vivo study, conducted using Sprague Dawley rats, proved the versatility of HF-MAPs in delivering and maintaining therapeutically-relevant concentrations (> 20 ng·mL^-1) of ATR over 14 days, following a single HF-MAP application for 24 h. The long-acting delivery of ATR suggests the successful formation of hydrophobic microdepots within the skin, allowing for the subsequent sustained delivery as they gradually dissolve over time, as shown in this work. When compared to the oral group, the use of the HF-MAP formulation improved the overall pharmacokinetics profile of ATR in plasma, where significantly higher AUC values resulting in ∼10-fold higher systemic exposure levels were obtained. This novel system offers a promising, minimally-invasive, long-acting alternative delivery system for ATR that is capable of enhancing patient compliance and therapeutic outcomes. It also proposes a unique promising platform for the long-acting transdermal delivery of other hydrophobic agents.

Dissolving Microneedle Arrays as a Hepatitis B Vaccine Delivery System Adjuvanted by APC-Targeted Poly (Lactic-co-Glycolic Acid) (PLGA) Nanoparticles

The objective of this study is to develop a new hepatitis B surface antigen (HBsAg) delivery system by coating soluble microneedle arrays with mannose-modified PLGA nanoparticles (MNPs). MNPs of different sizes were synthesized. The effects these nanoparticles on the maturation of dendritic cells were studied by flow cytometry. HBsAg-containing MNPs (HBsAg/MNPs) of the appropriate sizes were coated into water-soluble microneedle arrays. The in vitro characteristics of microneedles arrays and the immune responses after subcutaneous administration in mice were studied. The results showed that PLGA nanoparticles with an average size of about 800 nm showed the most significant effects in stimulating the maturation of dendritic cells. In the water-soluble microneedle array, the targeted PLGA nanoparticles containing HBsAg were distributed discretely with a maximum distribution height of about 280 μm with a drug load of 0.98 ± 0.05 μg/mg. The drug-containing microneedle arrays exhibited excellent mechanical properties and improved biosafety. The results of immune responses in vivo showed that the subcutaneous administration of the microneedle arrays induced the proliferation of splenocyte, secreted specific IL-12 and IFN-γ, and promote the production of IgG in mice. This study verifies the feasibility of soluble composited microneedles administration in hepatitis B immunization, and provides new ideas for the development and application of non-injectable vaccine delivery systems.

PVP-microneedle array for drug delivery: mechanical insight, biodegradation, and recent advances

Microneedle arrays are micron-sized needles usually attached to a supporting base or patch facilitated drug delivery for systemic effects. Polyvinylpyrrolidone (PVP) is a lactam polymer containing an internal amide linkage. Because of its versatility and biocompatibility, it has been widely utilized to treat several skin, bone and eye problems. Due to its specific and unique properties, the researchers realize its utility as a polymer of tremendous potential. PVP-based dissolvable microneedles have widely been utilized as a carrier for delivering DNAs, proteins, vitamins, and several biological macromolecules transdermally. However, it does not get biodegraded into the body. Therefore, the presence of its fragments in the body post-treatment needs proper justification. The adequate justification for the fate of the fragment's end products in the body will allow even better utilization of PVP. This review analyses and illustrates various experimental findings to highlight the most recent advancements and applications of PVP microneedles in drug delivery systems and cosmetology and the potential for PVP microneedles in treating dermal and systemic disorders. This review presents the expected mode of PVP biodegradation in aqueous and soil environments as a waste material, its inertness, biocompatibility, and the importance of PVP as a fabricating material, pharmaceutical uses, and non-toxic profile.

Deferasirox Nanosuspension Loaded Dissolving Microneedles for Intradermal Delivery

Microneedles are minimally invasive systems that can deliver drugs intradermally without pain and bleeding and can advantageously replace the hypodermal needles and oral routes of delivery. Deferasirox (DFS) is an iron chelator employed in several ailments where iron overload plays an important role in disease manifestation. In this study, DFS was formulated into a nanosuspension (NSs) through wet media milling employing PVA as a stabilizer and successfully loaded in polymeric dissolving microneedles (DMNs). The release studies for DFS-NS clearly showed a threefold increased dissolution rate compared to pure DFS. The mechanical characterization of DFS-NS-DMNs revealed that the system was sufficiently strong for efficacious skin penetration. Optical coherence tomography images confirmed an insertion of up to 378 µm into full-thickness porcine skin layers. The skin deposition studies showed 60% drug deposition from NS-DMN, which was much higher than from the DFS-NS transdermal patch (DFS-NS-TP) (without needles) or pure DFS-DMNs. Moreover, DFS-NS without DMNs did not deposit well inside the skin, indicating that DMNs played an important role in effectively delivering drugs inside the skin. Therefore, it is evident from the findings that loading DFS-NS into novel DMN devices can effectively deliver DFS transdermally.

Polymeric Microneedle Arrays with Glucose-Sensing Dynamic-Covalent Bonding for Insulin Delivery

The ongoing rise in diabetes incidence necessitates improved therapeutic strategies to enable precise blood glucose control with convenient device form factors. Microneedle patches are one such device platform capable of achieving therapeutic delivery through the skin. In recent years, polymeric microneedle arrays have been reported using methods of in situ polymerization and covalent crosslinking in microneedle molds. In spite of promising results, in situ polymerization carries a risk of exposure to toxic unreacted precursors remaining in the device. Here, a polymeric microneedle patch is demonstrated that uses dynamic-covalent phenylboronic acid (PBA)-diol bonds in a dual role affording both network crosslinking and glucose sensing. By this approach, a pre-synthesized and purified polymer bearing pendant PBA motifs is combined with a multivalent diol crosslinker to prepare dynamic-covalent hydrogel networks. The ability of these dynamic hydrogels to shear-thin and self-heal enables their loading to a microneedle mold by centrifugation. Subsequent drying then yields a patch of uniformly shaped microneedles with the requisite mechanical properties to penetrate skin. Insulin release from these materials is accelerated in the presence of glucose. Moreover, short-term blood glucose control in a diabetic rat model following application of the device to the skin confirms insulin activity and bioavailability. Accordingly, dynamic-covalent crosslinking facilitates a route for fabricating microneedle arrays circumventing the toxicity concerns of in situ polymerization, offering a convenient device form factor for therapeutic insulin delivery.

Effect of Surface Interactions on Microsphere Loading in Dissolving Microneedle Patches

Microneedle (MN) patches enable simple self-administration of drugs via the skin. In this study, we sought to deliver drug-loaded microspheres (MSs) using MN patches and found that the poly(lactic-co-glycolic acid) (PLGA) MSs failed to localize in the MN tips during fabrication, thereby decreasing their delivered dose and delivery efficiency into skin. We determined that surface interactions between the hydrophobic MSs and the poly(dimethylsiloxane) (PDMS) mold caused MSs to adhere to the mold surface during casting in aqueous formulations, with hydrophobic interactions largely responsible for adhesion. Further studies with polystyrene MSs that similarly carry a negative charge like the PLGA MSs demonstrated both repulsive electrostatic interactions as well as adhesive hydrophobic interactions. Reducing hydrophobic interactions by addition of a surfactant or modifying mold surface properties increased MS loading into MN tips and delivery into porcine skin ex vivo by 3-fold. We conclude that surface interactions affect the loading of hydrophobic MSs into MN patches during aqueous fabrication procedures and that their modulation with the surfactant can increase loading and delivery efficiency.

Hollow microneedle assisted intradermal delivery of hypericin lipid nanocapsules with light enabled photodynamic therapy against skin cancer

Photodynamic therapy (PDT) to manage non-melanoma skin cancers has garnered great attention over the past few years. Hypericin (Hy) is a potent lipid-soluble photosensitiser with promising anticancer therapeutic activities. Nevertheless, its poor water-solubility, aggregation in biological systems and insufficient skin penetration restricted its effective exploitation. Herein, we report for the first-time encapsulation of Hy into lipid nanocapsules (Hy-LNCs), and then application of an AdminPen™ hollow microneedles (Ho-MNs) array and an in-house fabricated Ho-MN to enable efficient intradermal delivery. The physicochemical properties, photoactivity, ex vivo drug distribution and cellular uptake were evaluated. Results showed that Hy-LNCs were successfully formed with a particle size of 47.76 ± 0.49 nm, PDI of 0.12 ± 0.02, high encapsulation efficiency (99.67% ± 0.35), 396 fold higher photoactivity, 7 fold higher skin drug deposition, significantly greater cellular uptake and higher photocytotoxicity compared to free Hy. The therapeutic effect of Hy-LNCs was finally assessed in vivo using a nude mouse model with transplanted tumours. Interestingly, Hy-LNCs delivered by Ho-MN exhibited remarkable anti-tumour destruction (85.84%) after irradiation with 595 nm. This study showed that Ho-MNs-driven delivery of Hy-LNCs followed by irradiation could form a promising minimally invasive, effective and site-specific approach for managing non-melanoma skin cancers.

Rapidly dissolving bilayer microneedles enabling minimally invasive and efficient protein delivery to the posterior segment of the eye

The discovery of proteins that neutralise vascular endothelial growth factors, such as pegaptanib, ranibizumab and aflibercept, can inhibit the process of angiogenesis, thereby restoring eyesight in individuals with retinal vascular disorders. However, due to the posterior location and chronic nature of retinal diseases, a safe and effective intraocular protein delivery system is currently lacking. Thus, dissolving bilayer microneedles (MNs) with the potential to deliver proteins to the back of the eye in an efficient and minimally invasive manner were developed in this study. A model protein, ovalbumin (OVA), was incorporated into MNs fabricated from different polymers, including hyaluronic acid (HA), polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Optimised PVA/PVP MNs were demonstrated to be robust enough to pierce porcine sclera with > 75% of the needle length penetrating the sclera and dissolving within 150 s. SDS-PAGE and OVA-specific ELISA revealed that the bioactivity of the model protein was maintained during the manufacture of MNs. In hen's egg-chorioallantoic membrane test, MNs fabricated from all chosen polymers were classified as non-irritants. Furthermore, ex vivo permeation studies showed that optimised MNs could permeate 86.99 ± 7.37% of OVA through the sclera, twice that of the needle-free patch (42.16 ± 3.95%), highlighting the capability of MNs to circumvent physical barriers and promote protein delivery to the posterior segment of the eye. In this work, a novel, efficient and safe intraocular protein delivery system was successfully established.

Nanosuspension-loaded dissolving bilayer microneedles for hydrophobic drug delivery to the posterior segment of the eye

Intravitreal injections (IVT) are regarded as the gold standard for effective delivery of hydrophobic drugs to the back of the eye. However, as a highly invasive procedure, the injection itself may lead to poor patient compliance and severe complications. In this research work, a hybrid system of nanosuspensions (NS) and dissolving microneedles (MNs) was developed as an alternative to conventional hypodermic needles used in IVT for minimally invasive transscleral delivery of hydrophobic drugs. NS of a hydrophobic drug, triamcinolone acetonide (TA), were fabricated using a wet milling technique. TA NS optimised by central composite factorial design had a proven diameter of 246.65 ± 8.55 nm. After optimisation, TA NS were incorporated into MN arrays to form a bilayer structure by high-speed centrifugation. TA NS-loaded MNs were robust enough to pierce excised porcine sclera with insertion depth higher than 80% of the needle height and showed rapid dissolution (<3 min). In contrast, the plain TA-loaded MNs exhibited poor mechanical and insertion performances and took more than 8 min to be fully dissolved in the scleral tissue. Importantly, transscleral deposition studies showed that 56.46 ± 7.76 μg/mm² of TA was deposited into the sclera after 5 min of NS-loaded MN application, which was 4.5-fold higher than plain drug-loaded MNs (12.56 ± 2.59 μg/mm²). An ex vivo distribution study revealed that MN arrays could promote the transscleral penetration of hydrophobic molecules with higher drug concentrations observed in the deep layer of the sclera. Moreover, the developed TA NS-loaded MN array was biocompatible with ocular tissues, as demonstrated using the hens egg-chorioallantoic membrane assay and cytotoxicity test. The results presented here demonstrate that the hybrid system of NS and dissolving MNs can provide a novel and promising technology to alleviate retinal diseases in a therapeutically effective and minimally invasive manner.

Hair follicle-targeting drug delivery strategies for the management of hair follicle-associated disorders

The hair follicle is not only a critical penetration route in percutaneous absorption but also has been recognized to be a target for hair follicle-associated disorders, such as androgenetic alopecia (AGA) and acne vulgaris. Hair follicle-targeting drug delivery systems allow for controlled drug release and enhance therapeutic efficacy with minimal side effects, exerting a promising method for the management of hair follicle-associated dysfunctions. Therefore, they have obtained much attention in several fields of research in recent years. This review gives an overview of potential follicle-targeting drug delivery formulations currently applied based on the particularities of the hair follicles, including a comprehensive assessment of their preclinical and clinical performance.

Tip-concentrated microneedle patch delivering everolimus for therapy of multiple sclerosis

Multiple sclerosis is a chronic progressive demyelinating disease of the central nervous system. At present, systemic drug therapy for multiple sclerosis has limited efficacy and serious side effects. Everolimus, as a new generation of mTOR inhibitors, can effectively alleviate the inflammatory reaction of the central nervous system and offers a promising choice for the treatment of multiple sclerosis. However, due to the low oral bioavailability and narrow response window of oral everolimus, a new delivery system is urgently needed to overcome the above problems. In this study, we constructed a tip-concentrated microneedle patch as a transdermal delivery system of everolimus for the treatment of multiple sclerosis. Here, the drug was concentrated in the needle tips by the rational design, making it delivered completely into the skin. The therapeutic effect of everolimus-loaded microneedles was evaluated using the experimental autoimmune encephalomyelitis (EAE) model and further verified with neurological function scores and the histopathological results of the spinal cord. These results indicated that the tip-concentrated microneedle patch provided an effective, safe and simple method for the transdermal delivery of everolimus, thus providing a new treatment for multiple sclerosis.

Trilayer microneedle array assisted transdermal and intradermal delivery of dexamethasone

Dexamethasone is a synthesised glucocorticoid that is widely used in the treatment of various inflammatory skin conditions. Novel trilayer dissolving microneedle arrays were manufactured to assist dexamethasone delivery via the skin. Both transdermal delivery and intradermal delivery of dexamethasone can be achieved this way. Additionally, we proposed a novel strategy of co-formulating dexamethasone and its pro-drug dexamethasone sodium phosphate into the same dissolving microneedle array, with a view to achieving a fast onset of action and also sustained treatment. Here, a 3D-printing technique was employed, for the first time, to fabricate a baseplate for these microneedle arrays. The 3D-printed baseplates provided strong support to aid the insertion of the drug-encapsulated tips. A simple and rapid HPLC method was developed, and validated, to separate and quantify dexamethasone and dexamethasone sodium phosphate in the same sample. Ex-vivo studies found that these trilayer dissolving microneedle arrays could achieve a delivery efficiency of over 40% in intradermal delivery and over 50% in transdermal delivery. Trilayer microneedle-assisted delivery of this glucocorticoid provided a promising alternative to oral and parenteral routes of dexamethasone administration.

Long-acting microspheres of Human Chorionic Gonadotropin hormone: In-vitro and in-vivo evaluation

Human Chorionic Gonadotropin (hCG) hormone is used to cause ovulation, treat infertility in women, and increase sperm count in men. Conventional hCG solution formulations require multiple administration of hCG per week and cause patient noncompliance. The long-acting PLGA depot microspheres (MS) approach with hCG can improve patient compliance, increase the efficacy of hCG with a lower total dose and improve quality of life. Therefore, hCG was encapsulated by a modified double emulsion solvent evaporation technique within PLGA MS by high-speed homogenizer and industrially scalable in-line homogenizer, respectively. MS was characterized for particle size, encapsulation efficiency (EE), surface morphology, and in-vitro release. The spherical, dense, non-porous microspheres were obtained with a size of 58.88 ± 0.18 µm. Microspheres showed high EE (77.4% ± 5.9%) with low initial burst release (12.82% ± 2.07%). Circular Dichroism and SDS-PAGE analysis indicated good stability and structural integrity of hCG in the microspheres. Its bioactivity was proven further by a bioassay study in immature Wistar rats. Pharmacokinetic analysis showed that the hCG PLGA MS maintained serum hCG concentration up to 13 days compared to multiple injections of a marketed conventional parenteral injectable formulation of hCG. Thus, it can be ascertained that the hCG PLGA MS may have great potential for clinical use in long-term therapy.

Bioimaging of Dissolvable Microneedle Arrays: Challenges and Opportunities

The emergence of microneedle arrays (MNAs) as a novel, simple, and minimally invasive administration approach largely addresses the challenges of traditional drug delivery. In particular, the dissolvable MNAs act as a promising, multifarious, and well-controlled platform for micro-nanotransport in medical research and cosmetic formulation applications. The effective delivery mostly depends on the behavior of the MNAs penetrated into the body, and accurate assessment is urgently needed. Advanced imaging technologies offer high sensitivity and resolution visualization of cross-scale, multidimensional, and multiparameter information, which can be used as an important aid for the evaluation and development of new MNAs. The combination of MNA technology and imaging can generate considerable new knowledge in a cost-effective manner with regards to the pharmacokinetics and bioavailability of active substances for the treatment of various diseases. In addition, noninvasive imaging techniques allow rapid, receptive assessment of transdermal penetration and drug deposition in various tissues, which could greatly facilitate the translation of experimental MNAs into clinical application. Relying on the recent promising development of bioimaging, this review is aimed at summarizing the current status, challenges, and future perspective on in vivo assessment of MNA drug delivery by various imaging technologies.

Rapidly dissolving microneedle patch of amphotericin B for intracorneal fungal infections

Chronic fungal infection of the cornea could lead to blindness if not treated properly. Topical amphotericin B (AMP-B) is considered the first treatment of choice for ocular fungal infection. However, factors related to its poor solubility and penetration through intact cornea lead to poor bioavailability. Microneedles (MNs) are emerging as a minimally invasive method to enhance ocular drug delivery. This study aims to investigate the potential use of biodegradable poly(vinylpyrrolidone) (PVP) and hyaluronic acid (HA)-based rapidly dissolving MNs for delivery of AMP-B to treat fungal infection. The data obtained illustrates PVP/HA MN arrays' reproducibility, good mechanical strength, and faster dissolution with 100% drug recovery. Multiphoton microscopic results revealed that MNs successfully penetrate the corneal tissue and enhance AMP-B permeation through corneal layers. Furthermore, PVP/HA MN arrays showed high solubility. Both PVP and HA successfully decreased AMP-B cytotoxicity when compared to free drug. More interestingly, the biocompatible MN formulations preserved the antifungal activity of AMP-B, as demonstrated by significant inhibition of fungal growth. Therefore, this study shows the feasibility of ocular delivery of the poorly soluble AMP-B using a fast-dissolving MN patch.

Nanoemulsion-based dissolving microneedle arrays for enhanced intradermal and transdermal delivery

The development of dissolving microneedles (DMN) is one of the advanced technologies in transdermal drug delivery systems, which precisely deliver the drugs through a rapid dissolution of polymers after insertion into the skin. In this study, we fabricated nanoemulsion-loaded dissolving microneedle (DMN) arrays for intradermal and transdermal drug delivery. For this task, model drug (amphotericin B, AmB)-loaded nanoemulsion (NE) were prepared by the probe-sonication method. AmB-loaded-NE was prepared using Capmul MCM C-8 EP/NF, Tween^® 80, poly(vinyl alcohol) (PVA-10 kDa), and poly (vinyl pyrrolidone) (PVP-360 kDa or K29/32) by using SpeedMixer™, followed by probe-sonication and evaluated for particle size and polydispersity index (PDI). Transmission electron microscopy (TEM) was also used to assess the particle size before and after DMN casting. AmB-NE embedded DMN arrays were found to be strong enough, revealed efficient skin insertion, and penetrated down to the fourth layer (depth ≈ 508 μm) of Parafilm M^® (validated skin model). Ex vivo skin deposition experiments in full-thickness neonatal porcine demonstrated that after 24 h, AmB-NE-DMN arrays were able to deposit 111.05 ± 48.4 µg/patch AmB into the skin. At the same time, transdermal porcine skin permeation studies showed significantly higher permeability of AmB (29.60 ± 8.23 μg/patch) from AmB-NE-DMN compared to MN-free AmB-NE patches (5.0 ± 6.15 μg/patch) over 24 h. Antifungal studies of optimized AmB-NE-DMN, AmB-loaded discs and drug-free DMN against Candida albicans, confirmed the synergistic activity of Campul-MCM C-8, used in the nanoemulsion formulation. This study establishes that nanoemulsion based dissolving microneedle may serve as an efficient system for intradermal as well as transdermal drug delivery.

Dissolving microneedle-assisted long-acting Liraglutide delivery to control type 2 diabetes and obesity

Integrating nanoparticles (NPs) as a smart and targeted tool for drug delivery with dissolving microneedle (DMN) patch, the non-invasive device for drug delivery, is a promising for future therapeutic delivery applications. Liraglutide (Lira) encapsulation in poly (lactic-co-glycolic acid) (PLGA) NPs provides a sustained release of Lira to 15 days in a biphasic profile which 80% of released content happens in the first 8 days. Embedding such sustained release NPs in the DMN comprising poly vinyl pyrrolidone (PVP) 50% w/v, eliminates the need for Lira subcutaneous injection. Additionally, NPs containing DMN enhance mechanical strength of needles to 5.31 N compared to DMN with pure Lira content which was 4.32 N. The flexible backing layer of the DMN was obtained via blending of PVP and poly vinyl alcohol (PVA) in 10% w/v. Circular dichroism (CD) analysis showed that Lira encapsulated in NPs maintained its native secondary structure even after solidification in DMN. In this study, the capacity of 2 kinds of 500 μm and 1000 μm needles to deliver the desired dose of drug was obtained based on experimental and mathematical methods.

Dissolving microneedle patches loaded with amphotericin B microparticles for localised and sustained intradermal delivery: Potential for enhanced treatment of cutaneous fungal infections

Fungal infections affect millions of people globally and are often unreceptive to conventional topical or oral preparations because of low drug bioavailability at the infection site, lack of sustained therapeutic effect, and the development of drug resistance. Amphotericin B (AmB) is one of the most potent antifungal agents. It is increasingly important since fungal co-infections associated with COVID-19 are frequently reported. AmB is only administered via injections (IV) and restricted to life-threatening infections due to its nephrotoxicity and administration-related side effects. In this work, we introduce, for the first time, dissolving microneedle patches (DMP) loaded with micronised particles of AmB to achieve localised and long-acting intradermal delivery of AmB for treatment of cutaneous fungal infections. AmB was pulverised with poly (vinyl alcohol) and poly (vinyl pyrrolidone) to form micronised particles-loaded gels, which were then cast into DMP moulds to form the tips. The mean particle size of AmB in AmB DMP tips after pulverisation was 1.67 ± 0.01 μm. This is an easy way to fabricate and load microparticles into DMP, as few steps are required, and no organic solvents are needed. AmB had no covalent chemical interaction with the excipients, but the crystallinity of AmB was reduced in the tips. AmB was completely released from the tips within 4 days in vitro. AmB DMP presented inhibition of Candida albicans (CA) and the killing rate of AmB DMP against CA biofilm inside porcine skin reached 100% within 24 h. AmB DMP were able to pierce excised neonatal porcine skin at an insertion depth of 301.34 ± 46.86 μm. Ex vivo dermatokinetic and drug deposition studies showed that AmB was mainly deposited in the dermis. An in vivo dermatokinetic study revealed that the area under curve (AUC_0-inf) values of AmB DMP and IV (Fungizone® bolus injection 1 mg/kg) groups were 8823.0 d∙μg/g and 33.4 d∙μg/g, respectively (264-fold higher). AmB remained at high levels (219.07 ± 102.81 μg/g or more) in the skin until 7 days after the application of AmB DMP. Pharmacokinetic and biodistribution studies showed that AmB concentration in plasma, kidney, liver, and spleen in the AmB DMP group was significantly lower than that in the IV group. Accordingly, this system addressed the systemic side effects of intravenous injection of AmB and localised the drug inside the skin for a week. This work establishes a novel, easy and effective method for long-acting and localised intradermal drug delivery.

Dissolving Microneedles Developed in Association with Nanosystems: A Scoping Review on the Quality Parameters of These Emerging Systems for Drug or Protein Transdermal Delivery

The largest organ of the body provides the main challenge for the transdermal delivery of lipophilic or high molecular weight drugs. To cross the main barrier of the skin, the stratum corneum, many techniques have been developed and improved. In the last 20 years, the association of microneedles with nanostructured systems has gained prominence for its versatility and for enabling targeted drug delivery. Currently, the combination of these mechanisms is pointed to as an emerging technology; however, some gaps need to be answered to transcend the development of these devices from the laboratory scale to the pharmaceutical market. It is known that the lack of regulatory guidelines for quality control is a hindrance to market conquest. In this context, this study undertakes a scoping review of original papers concerning methods applied to evaluate both the quality and drug/protein delivery of dissolving and hydrogel-forming microneedles developed in association with nanostructured systems.

Smart Responsive Microarray Patches for Transdermal Drug Delivery and Biological Monitoring

Traditional drug delivery routes possess various disadvantages which make them unsuitable for certain population groups, or indeed unsuitable for drugs with certain physicochemical properties. As a result, a variety of alternative drug delivery routes have been explored in recent decades, including transdermal drug delivery. One of the most promising novel transdermal drug delivery technologies is a microarray patch (MAP), which can bypass the outermost skin barrier and deliver drugs directly into the viable epidermis and dermis. Unlike traditional MAPs which release loaded cargo simultaneously upon insertion into the skin, stimuli responsive MAPs based on biological stimuli are able to precisely release the drug in response to the need for additional doses. Thus, smart MAPs that are only responsive to certain external stimuli are highly desirable, as they provide safer and more efficient drug delivery. In addition to drug delivery, they can also be used for biological monitoring, which further expands their applications.

A comprehensive review on possibilities of treating psoriasis using dermal cyclosporine

Psoriasis is an autoimmune, chronic proliferative, inflammatory skin disease with high comorbidity. Psoriasis is not a curable disease; it can only be managed. Cyclosporine A (CyA) is one of the FDA-approved immunosuppressant drug used in severe Psoriasis. Till date only oral route is used for its administration. Administration of CyA by this route causes serious side effects such as hypertension and renal toxicity. Due to these side effects, a number of researches have been done and taking place in the current times for the dermal delivery of CyA for the management of psoriasis. Dermal delivery of CyA is not an easy task because of its physiochemical properties like high molecular weight, lipophilicity and resistance offered by stratum corneum (SC). Because of the above problems in the dermal delivery a number of new approaches such as nanolipid carriers, microemulsion, liposomes, niosomes etc. are explored. To those deep findings for psoriasis management with dermal delivery of CyA have not been discussed. This comprehensive review includes all the studies, advancements and their critical findings which took place in the recent times for the dermal delivery of CyA and along with the suitable modification needed for the efficient dermal delivery of CyA are also suggested.

Microneedles for drug delivery: recent advances in materials and geometry for preclinical and clinical studies

INTRODUCTION

A microneedle array patch (MAP) has been studied as a means for delivering drugs or vaccines and has shown superior delivery efficiency compared to the conventional transdermal drug delivery system (TDD). This paper reviews recent advancements in the development of MAPs, with a focus on their size, shapes, and materials in preclinical and clinical studies for pharmaceutics.

AREA COVERED

We classified MAPs for drug delivery into four types: coated, dissolving, separable, and swellable. We covered their recent developments in materials and geometry in preclinical and clinical studies.

EXPERT OPINION

The design of MAPs needs to be determined based on what properties would be effective for the target diseases and purposes. In addition, in preclinical studies, it is necessary to consider not only the novelty of the formulations but also the feasibility of clinical application. Currently, clinical studies of microneedles loaded with various drugs and vaccines are in progress. When the regulation of pharmaceutical microneedles is established and more clinical studies are published, more drugs will be developed as microneedle products and clinical research will proceed. With these considerations, the microneedle array patch will be a better option for drug delivery.

Panorama of dissolving microneedles for transdermal drug delivery

Recently, microfabrication technology has been developed to increase the permeability of drugs for transdermal delivery. Microneedles are ultra-small needles usually in the micron size range (different dimensions in micron), generate pores, and allow for delivery of local medication in the systemic circulation via skin. The microneedles have been available in dissolving, solid, coated, hollow, and hydrogel-based microneedles. Dissolving microneedles have been fabricated using micro-molding, photo-polymerization, drawing lithography and droplet blowing techniques. Dissolving microneedles could be a valuable option for the delivery of low molecular weight drugs, peptides, enzymes, vaccines and bio-therapeutics. It consists of water-soluble materials including maltose, polyvinyl pyrrolidone, chondroitin sulfate, dextran, hyaluronic acid, and albumin. The microneedles have almost dissolved after patch removal, leaving only blunt stubs behind, which are easily removable. In this review, we summarize the major building blocks, classification, fabrication techniques, characterization, diffusion models and application of microneedles in diverse area. We also reviewed the regulatory aspects, computational studies, patents, clinical data, and market trends of microneedles.

Estriol dissolving microneedle patches for protection against ionizing radiation-induced injury

Estriol can be used to treat radiation-induced leukopenia by increasing peripheral blood leukocytes and therefore it plays an important role in radiation protection. However, only high-dose injectable suspensions are available when estriol is used to combat against ionizing radiation-induced injury. Intramuscular (i.m.) administration of estriol is very painful and inconvenient, and the lack of timely self-administered formulation greatly limits the wide application of estriol. This will facilitate quick response under emergent conditions in complementary with the available estriol formulations. Herein, we prepared estriol microneedle (MNs) patches for the convenient and efficient treatment of radiation-induced injury. A biocompatible polymer, polyvinylpyrrolidone K90, was dissolved in an estriol solution of methanol and cast into a mold to obtain conical-shaped MNs. N-vinyl pyrrolidone was poured on the base of the MNs and photocured to enhance the mechanical strength of estriol MNs (EMNs). EMNs were easily pierced 200 μm into the mouse skin. More importantly, the EMNs tips were dissolved very quickly within 5 min so that the drugs could permeate across skin. Mouse models of ionizing radiation-induced injury were established with 6.5 Gy radiation of ⁶⁰Co γ ray. Moreover, EMNs increased peripheral blood leukocytes in irradiated mice, protected the bone marrow hematopoietic system, and improved the survival rate of the irradiated mice to 80%. EMNs are a promising transdermal drug delivery system that allows for easy, rapid administration and protects the body from damage caused by ionizing radiation.

3D Printing-A "Touch-Button" Approach to Manufacture Microneedles for Transdermal Drug Delivery

Microneedles (MNs) represent the concept of attractive, minimally invasive puncture devices of micron-sized dimensions that penetrate the skin painlessly and thus facilitate the transdermal administration of a wide range of active substances. MNs have been manufactured by a variety of production technologies, from a range of materials, but most of these manufacturing methods are time-consuming and expensive for screening new designs and making any modifications. Additive manufacturing (AM) has become one of the most revolutionary tools in the pharmaceutical field, with its unique ability to manufacture personalized dosage forms and patient-specific medical devices such as MNs. This review aims to summarize various 3D printing technologies that can produce MNs from digital models in a single step, including a survey on their benefits and drawbacks. In addition, this paper highlights current research in the field of 3D printed MN-assisted transdermal drug delivery systems and analyzes parameters affecting the mechanical properties of 3D printed MNs. The current regulatory framework associated with 3D printed MNs as well as different methods for the analysis and evaluation of 3D printed MN properties are outlined.