Time-dependently slow-released multiple-drug eluting external sheath for efficient long-term inhibition of saphenous vein graft failure

Effect of sequential release of sirolimus and rosuvastatin using silk fibroin microneedle to prevent intimal hyperplasia

Intimal hyperplasia (IH) is a major cause of vascular restenosis after bypass surgery, which progresses as a series of processes from the acute to chronic stage in response to endothelial damage during bypass grafting. A strategic localized drug delivery system that reflects the pathophysiology of IH and minimizes systemic side effects is necessary. In this study, the sequential release of sirolimus, a mechanistic target of rapamycin (mTOR) inhibitor, and statin, an HMG-COA inhibitor, was realized as a silk fibroin-based microneedle device in vivo. The released sirolimus in the acute stage reduced neointima (NI) and vascular fibrosis through mTOR inhibition. Furthermore, rosuvastatin, which was continuously released from the acute to chronic stage, reduced vascular stiffness and apoptosis through the inactivation of Yes-associated protein (YAP). The sequential release of sirolimus and rosuvastatin confirmed the synergistic treatment effects on vascular inflammation, VSMC proliferation, and ECM degradation remodeling through the inhibition of transforming growth factor (TGF)-beta/NF-κB pathway. These results demonstrate the therapeutic effect on preventing restenosis with sufficient vascular elasticity and significantly reduced IH in response to endothelial damage. Therefore, this study suggests a promising strategy for treating coronary artery disease through localized drug delivery of customized drug combinations.

External stenting for saphenous vein grafts in coronary artery bypass grafting: A meta-analysis

OBJECTIVES

Autologous saphenous vein grafts (SVGs) are the most commonly used bypass conduits in coronary artery bypass grafting (CABG) with multivessel coronary artery disease. Although external support devices for SVGs have shown promising outcomes, the overall efficacy and safety remains controversial. We aimed to evaluate external stenting for SVGs in CABG versus non-stented SVGs.

METHODS

MEDLINE, EMBASE, Cochrane Library and clinicaltrails.gov were searched for randomized controlled trials (RCTs) to evaluate external-stented SVGs versus non-stented SVGs in CABG up to 31 August 2022. The risk ratio and mean difference with 95% confidence interval were analysed. The primary efficacy outcomes included intimal hyperplasia area and thickness. The secondary efficacy outcomes were graft failure (≥50% stenosis) and lumen diameter uniformity.

RESULTS

We pooled 438 patients from three RCTs. The external stented SVGs group showed significant reductions in intimal hyperplasia area (MD: -0.78, p < 0.001, I2  = 0%) and thickness (MD: -0.06, p < 0.001, I2  = 0%) compared to the non-stented SVGs group. Meanwhile, external support devices improved lumen uniformity with Fitzgibbon I classification (risk ratio (RR):1.1595, p = 0.05, I2  = 0%). SVG failure rates were not increased in the external stented SVGs group during the short follow-up period (RR: 1.14, p = 0.38, I2  = 0%). Furthermore, the incidences of mortality and major cardiac and cerebrovascular events were consistent with previous reports.

CONCLUSIONS

External support devices for SVGs significantly reduced the intimal hyperplasia area and thickness, and improved the lumen uniformity, assessed with the Fitzgibbon I classification. Meanwhile, they did not increase the overall SVG failure rate.

A review on the treatment of intimal hyperplasia with perivascular medical devices: role of mechanical factors and drug release kinetics

INTRODUCTION

Intimal hyperplasia (IH) is a significant factor limiting the success of revascularization surgery for blood flow restoration. IH results from a foreign body response and mechanical disparity that involves complex biochemical reactions resulting in graft failure. The available treatment option utilizes either different pharmacological interventions or mechanical support to the vascular grafts with limited success.

AREAS COVERED

This review explains the pathophysiology of IH, responsible mechanical and biological factors, and treatment options, emphasizing perivascular devices. They are designed to provide mechanical support and pharmacology actions. The perivascular drug delivery concept has successfully demonstrated efficacy in various animal studies. Accurate projections of drug release mechanisms using mathematical modeling could be used to formulate prolonged drug elution devices. Numerical modeling aspects for the prediction of design outcomes have been given due importance that fulfills the unmet clinical need for better patient care.

EXPERT OPINION

IH could be effectively prevented by simultaneous mechanical scaffolding and sustained local drug delivery. Future perivascular medical devices could be designed to integrate these essential features. Numerical modeling for device performance prediction should be utilized in the development of next-generation perivascular devices.

Multifunctional nanoparticle-VEGF modification for tissue-engineered vascular graft to promote sustained anti-thrombosis and rapid endothelialization

Purpose: The absence of a complete endothelial cell layer is a well-recognized reason leading to small-diameter tissue-engineered vascular graft failure. Here we reported a multifunctional system consisting of chitosan (CS), Arg-Glu-Asp-Val (REDV) peptide, heparin, and vascular endothelial growth factor (VEGF) to achieve sustained anti-thrombosis and rapid endothelialization for decellularized and photo-oxidized bovine internal mammary arteries (DP-BIMA). Methods: CS-REDV copolymers were synthesized via a transglutaminase (TGase) catalyzed reaction. CS_-REDV-Hep nanoparticles were formed by electrostatic self-assembly and loaded on the DP-BIMA. The quantification of released heparin and vascular endothelial growth factor was detected. Hemolysis rate, platelets adhesion, endothelial cell (EC) adhesion and proliferation, and MTT assay were performed in vitro. The grafts were then tested in a rabbit abdominal aorta interposition model for 3 months. The patency rates were calculated and the ECs regeneration was investigated by immunofluorescence staining of CD31, CD144, and eNOS antibodies. Results: The nanoparticle-VEGF system (particle size: 61.8 ± 18.3 nm, zeta-potential: +13.2 mV, PDI: .108) showed a sustained and controlled release of heparin and VEGF for as long as 1 month and exhibited good biocompatibility, a lower affinity for platelets, and a higher affinity for ECs in vitro. The nanoparticle-VEGF immobilized BIMA achieved 100% and 83.3% patency in a rabbit abdominal interposition model during 1 and 3 months, respectively, without any thrombogenicity and showed CD31, CD144, eNOS positive cell adhesion as early as 1 day. After 3 months, CD31, CD144, and eNOS positive cells covered almost the whole luminal surface of the grafts. Conclusion: The results demonstrated that the multifunctional nanoparticle-VEGF system can enhance the anti-thrombosis property and promote rapid endothelialization of small-diameter tissue-engineered vascular grafts. Utilizing nanoparticles to combine different kinds of biomolecules is an appropriate technology to improve the long-term patency of small-diameter tissue-engineered vascular grafts.

A Adiponectina Previne a Reestenose pela Inibição da Proliferação Celular em um Modelo de Enxerto Venoso em Ratos

Fundamento:

O enxerto de bypass na artéria coronária (CABG) continua a ser eficiente como tratamento para pacientes portadores de doença arterial coronariana; entretanto, o enxerto venoso tende a apresentar reestenose ou oclusão. A adiponectina (ADP) é uma proteína hormonal plasmática com a função de regular a proliferação celular.

Objetivo:

Foram utilizadas duas doses diferentes da proteína ADP em um modelo de enxerto venoso em ratos para estimular a alteração do enxerto venoso. O objetivo deste estudo foi investigar o efeito da ADP sobre a reestenose em enxerto venoso.

Métodos:

Veias jugulares autólogas foram implantadas como enxertos interposicionais de carótida pela técnica de anastomose de manga em ratos Sprague Dawley. A adiponectina (2,5 μg e 7,5 μg) foi entregue ao enxerto venoso por bypass de forma perivascular, suspensa em gel Pluronic-F127 a 30%. O grupo tratado apenas com bypass e o grupo tratado com gel veículo carregado apenas com Pluronic funcionaram como controle. Foram feitas comparações com análise de via única de variância e teste post-hoc, com p <0,05 sendo considerado significativo.

Resultados:

A proliferação celular (índice de PCNA) foi significativamente baixa no grupo tratado com adiponectina em comparação com o grupo de controle e o grupo tratado com o gel veículo na íntima e na adventícia dos enxertos a partir do dia 3 (p <0,01). VCAM-1 e ICAM-1 avaliados por imuno-histoquímica diminuíram significativamente em enxertos venosos tratados com adiponectina na quarta semana (p <0,01). O tratamento de enxertos venosos com gel carregado com adiponectina reduziu a espessura da íntima, da média e da adventícia, em comparação com os enxertos de controle e tratados com gel veículo no dia 28 (p <0,01).

Conclusões:

Este estudo oferece evidências adicionais do possível papel terapêutico da adiponectina na modulação de lesão vascular e seu reparo.

Highly flexible and porous silk fibroin microneedle wraps for perivascular drug delivery

Various perivascular drug delivery techniques have been demonstrated for localized post-treatment of intimal hyperplasia: a vascular inflammatory response caused by endothelial damages. Although most perivascular devices have focused on controlling the delivery duration of anti-proliferation drug, the confined and unidirectional delivery of the drug to the target tissue has become increasingly important. In addition, careful attention should also be paid to the luminal stability and the adequate exchange of vascular protein or cell between the blood vessel and extravascular tissue to avoid any side effect from the long-term application of any perivascular device. Here, a highly flexible and porous silk fibroin microneedle wrap (Silk MN wrap) is proposed to directly inject antiproliferative drug to the anastomosis sites while ensuring sufficient vascular exchanges. Drug-embedded silk MNs were transfer-molded on a highly flexible and porous silk wrap. The enhanced cell compatibility, molecular permeability, and flexibility of silk MN wrap guaranteed the structural integrity of blood vessels. Silk wrap successfully supported the silk MNs and induced multiple MN penetration to the target tissue. Over 28 days, silk MN wrap significantly inhibited intimal hyperplasia with a 62.1% reduction in neointimal formation.

PLCL vascular external sheath carrying prednisone for improving patency rate of the vein graft

Coronary artery bypass graft surgery (CABG) is an impactful treatment for coronary heart disease. Intimal hyperplasia is the central reason for the restenosis of vein grafts after CABG. The introduction of external vascular sheaths around VGs (VGs) can effectively inhibit intimal hyperplasia and ensure the patency of VGs. In this study, the well-known biodegradable copolymer poly (ε-caprolactone-co-L, L-lactide) (PLCL) was electrospun into high porosity external sheaths. The prednisone loaded in the PLCL sheath was slowly released during the degradation process of PLCL. Under the combined effects of sheath and prednisone, intimal hyperplasia was inhibited. For the cell experiments, all sheaths show low cytotoxicity to L929 cells at different concentrations at different time intervals. The ultrasonography and histological results showed prominent dilation and intimal hyperplasia of VG without sheath after two months of surgery. But there was no dilation in PLCL and PLCL_Prednisone groups. Notably, the prednisone-loaded sheath group exhibited efficacy in inhibiting intimal hyperplasia and ensured graft patency.

Sequential Release of Paclitaxel and Imatinib from Core-Shell Microparticles Prepared by Coaxial Electrospray for Vaginal Therapy of Cervical Cancer

To optimize the anti-tumor efficacy of combination therapy with paclitaxel (PTX) and imatinib (IMN), we used coaxial electrospray to prepare sequential-release core–shell microparticles composed of a PTX-loaded sodium hyaluronate outer layer and an IMN-loaded PLGA core. The morphology, size distribution, drug loading, differential scanning calorimetry (DSC), Fourier transform infrared spectra (FTIR), in vitro release, PLGA degradation, cellular growth inhibition, in vivo vaginal retention, anti-tumor efficacy, and local irritation in a murine orthotopic cervicovaginal tumor model after vaginal administration were characterized. The results show that such core–shell microparticles were of spherical appearance, with an average size of 14.65 μm and a significant drug-loading ratio (2.36% for PTX, 19.5% for IMN, w/w), which might benefit cytotoxicity against cervical-cancer-related TC-1 cells. The DSC curves indicate changes in the phase state of PTX and IMN after encapsulation in microparticles. The FTIR spectra show that drug and excipients are compatible with each other. The release profiles show sequential characteristics in that PTX was almost completely released in 1 h and IMN was continuously released for 7 days. These core–shell microparticles showed synergistic inhibition in the growth of TC-1 cells. Such microparticles exhibited prolonged intravaginal residence, a >90% tumor inhibitory rate, and minimal mucosal irritation after intravaginal administration. All results suggest that such microparticles potentially provide a non-invasive local chemotherapeutic delivery system for the treatment of cervical cancer by the sequential release of PTX and IMN.

The Role of Angiogenesis-Inducing microRNAs in Vascular Tissue Engineering

Angiogenesis is an important process in tissue repair and regeneration as blood vessels are integral to supply nutrients to a functioning tissue. In this review, the application of microRNAs (miRNAs) or anti-miRNAs that can induce angiogenesis to aid in blood vessel formation for vascular tissue engineering in ischemic diseases such as peripheral arterial disease and stroke, cardiac diseases, and skin and bone tissue engineering is discussed. Endothelial cells (ECs) form the endothelium of the blood vessel and are recognized as the primary cell type that drives angiogenesis and studied in the applications that were reviewed. Besides ECs, mesenchymal stem cells can also play a pivotal role in these applications, specifically, by secreting growth factors or cytokines for paracrine signaling and/or as constituent cells in the new blood vessel formed. In addition to delivering miRNAs or cells transfected/transduced with miRNAs for angiogenesis and vascular tissue engineering, the utilization of extracellular vesicles (EVs), such as exosomes, microvesicles, and EVs collectively, has been more recently explored. Proangiogenic miRNAs and anti-miRNAs contribute to angiogenesis by targeting the 3'-untranslated region of targets to upregulate proangiogenic factors such as vascular endothelial growth factor (VEGF), basic fibroblast growth factor, and hypoxia-inducible factor-1 and increase the transduction of VEGF signaling through the PI3K/AKT and Ras/Raf/MEK/ERK signaling pathways such as phosphatase and tensin homolog or regulating the signaling of other pathways important for angiogenesis such as the Notch signaling pathway and the pathway to produce nitric oxide. In conclusion, angiogenesis-inducing miRNAs and anti-miRNAs are promising tools for vascular tissue engineering for several applications; however, future work should emphasize optimizing the delivery and usage of these therapies as miRNAs can also be associated with the negative implications of cancer.

Biologically responsive, long-term release nanocoating on an electrospun scaffold for vascular endothelialization and anticoagulation

A critical challenge to the development of tissue engineering small-diameter vascular grafts is to achieve rapid endothelialization and long-term anticoagulation. It is necessary to graft both adhesion and antithrombus factors onto the surface of polycaprolactone without burst release to promote endothelial cell affinity and antithrombogenicity. A bionic structure with a nanocoating that allows a biologically responsive, long-term release was employed in this work to enable the grafting of various bioactive molecules such as gelatin, polylysine, and heparin. This approach involved orienting the biomimetic vascular structures; the self-assembly grafting of gelatin, polylysine, and heparin nanoparticles; and genipin crosslinking to form a multiphase crosslinked nanocoating. In this biologically inspired design, vascular endothelialization and long-term anticoagulation were successfully induced through a matrix metallopeptidase 2 regulative mechanism by delivering both adhesion and antithrombus factors with a responsive, long-term release without burst release. The method provided a simple and effective approach for delivering dual factors for tissue engineering small-diameter vascular grafts.