Improvement of bio-based polyurethane and its optimal application in controlled release fertilizer

A highly reactive soybean oil-based superhydrophobic polyurethane film with long-lasting antifouling and abrasion resistance

Superhydrophobic polyurethanes offer robust hydrophobicity and corrosion resistance. However, it is essential to consider the durability and environmental constraints associated with these materials. This study prepared a bio-based superhydrophobic polyurethane coating film using epoxidized soybean oil, superhydrophobically modified silica nanoparticles, and OH-PDMS-OH as surface modifiers. The coating film exhibited sustained super-hydrophobicity and an excellent antifouling effect for pu-erh tea and edible oils, among other substances, after 14 days of immersion in solutions with different pH values, 28 days of exposure to air, and 2000 abrasion cycles. This finding can be applied to the development of daily indoor and outdoor antifouling protective coatings and provides a new method for the preparation of green and durable superhydrophobic antifouling coating films.

Research Status of Lignin-Based Polyurethane and Its Application in Flexible Electronics

Polyurethanes (PU) have drawn great attention due to their excellent mechanical properties and self-healing and recyclable abilities. Lignin is a natural and renewable raw material in nature, composed of a large number of hydroxyl groups, and has a great potential to replace petroleum polyols in PU synthesis. This review summarizes the recent advances in modification methods such as the liquefaction, alkylation, and demethylation of lignin, and a systematic analysis of how to improve the reactivity and monomer substitution of lignin during polyurethane synthesis for the green manufacturing of high-performance polyurethanes was conducted. Polyurethane can be used in the form of films, foams, and elastomers instead of conventional materials as a dielectric or substrate material to improve the reliability and durability of flexible sensors; this review summarizes the green synthesis of polyurethanes and their applications in flexible electronics, which are expected to provide inspiration for the wearable electronics sector.

Preparation and characterization of liquefied eggplant branch bio-based controlled-release fertilizer

Bio-based coating materials have received increased attention because of their low-cost, environmentally friendly, and sustainable properties. In this paper, a novel coating material was developed to coat ureas using bio-based coating material derived from liquefied eggplant branches to form controlled-release ureas (CRUs). Also, the optimum proportion of liquefier was studied. Furthermore, dimethyl siloxane was used to modify liquified eggplant branches to make them hydrophobic, resulting in hydrophobic controlled-release ureas (SCRUs). This hydrophobic-enabled coating is environmentally friendly and highly efficient. The products were characterized by specific scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry, and the water contact angles of CRUs and SCRUs were determined. The nutrient-release characteristics of the SCRUs in water were determined at 25 °C and compared with those of CRUs. The results showed that the modification with dimethyl siloxane reduced the N release rate and increased the longevity of the fertilizer coated with hydrophobic bio-based coating material. In addition, organosilicon atoms on the SCRU surface also block the micro-holes on the coating and thus reduce the entry of water onto the coating. The results suggest that the new coating technology can create a hydrophobic surface on bio-based coating material and thus improve their controlled-release characteristics.

Yield, Quality, and Nitrogen Leaching of Open-Field Tomato in Response to Different Nitrogen Application Measures in Northwestern China

The overuse of fertilizers in open-field tomato leads to soil deterioration through nutrient leaching and increases the risk of agricultural non-point source contamination. Currently, the combined effects of different fertilization methods on soil nitrogen leaching and tomato production are still unclear. Therefore, the most effective fertilization method for open-field tomato should be discovered by examining how different fertilization methods affected tomato yield and quality, nitrogen use efficiency (NUE), and soil nitrogen leaching. Compared with CK (no fertilization), fertilization significantly increased the yield, total sugar (TS), total soluble solids (TSS), and vitamin C (vC) contents of fruits (p < 0.05), and OPT (optimal fertilization, controlled release nitrogen application, 240 kg ha-1) had the largest effect on increasing yield, quality, and net profit. However, when the fertilizer application rate reached 375 kg ha-1, these indices decreased. Nitrogen leaching concentrations, leaching amount, and titratable acids (TAs) increased with increased nitrogen application rates. Compared with other treatments, OPT reduced the total leaching amounts of total nitrogen (TN), nitrate nitrogen (NO3--N), and ammonia nitrogen (NH4+-N) by 30.09-51.79%, 24.89-50.03%, and 30-65%, respectively. Principal component analysis (PCA) showed that OPT achieved the highest overall score in terms of yield, quality, and nitrogen leaching conditions. The partial least squares path modeling (PLS-PM) further reveals that applications of high amounts of nitorigen have a positive effect on soil nitrogen leaching. The amount of nitrogen leaching vegetatively affects tomato yield and quality, while plant uptake of nitrogen positively affects tomato production. These findings confirm the importance of using controlled-release fertilizers and reducing nitrogen inputs to control nitrogen leaching and enhance open-field tomato yields.

Water-resistant and pyknotic recyclable waste-cotton-derived bio-polyurethane-coated controlled-release fertilizer: Improved longevity, mechanism and application

Reasonably utilize the recyclable waste-cotton resource to develop the bio-polyurethane coatings had aroused more and more environmental interests recently. However, the terrible water resistance and porousness of the waste-cotton-derived bio-polyurethane coating caused the rapid nutrients release. In this work, the water-resistant and pyknotic cotton-fibre-derived coated-ureas (WPCUs) were fabricated with the recyclable low-cost waste-cotton-derived materials. The dramatically enhanced pyknotic and water-resistant characteristics of the WPCUs coatings can be obtained by the three-dimensional computerized tomography (2.33 to 1.19 %) and the water contact angle. The enhanced elasticity and the decreased water absorption were also vital to enhance the controlled-release performance. The accompanying controlled-release performance of the WPCUs was obviously improved (<2 h to 58.43 days). The modified WPCU75-10 with 4.0 % coating content exhibits the excellent controlled-release performance compared to the unmodified WPCU0-0. The controlled release mechanism can be clarified: The air column inside of the "small and few" micropores in the WPCUs coating only allow the gaseous water molecules to slowly penetrate and dissolve the inner urea cores (rather than liquid water). The obviously increased oilseed rape yield (128.75 %) showed the dependable agricultural application of the WPCUs. This work provides the resultful approach to develop the eco-friendly recyclable waste-plant-derived controlled-release fertilizers.

Recommended Values for the Hydrophobicity and Mechanical Properties of Coating Materials Usable for Preparing Controlled-Release Fertilizers

The hydrophobicity and mechanical properties of coating materials and the nitrogen (N) release rates of 11 kinds of controlled-release fertilizers (CRFs) were determined in this study. The results show that the N release periods of the CRFs had negative correlations with the water absorption (WA) of the coating materials (y = 166.06x-1.24, r = 0.986), while they were positively correlated with the water contact angle (WCA) and elongation at break (EB) (y = 37.28x0.18, r = 0.701; y = -19.42 + 2.57x, r = 0.737). According to the fitted functional equation, CRFs that could fulfil the N release period of 30 days had a coating material WA < 2.4%, WCA > 68.8°, and EB > 57.7%. The recommended values for a CRF that can fulfil the N release period of 30 days are WA < 3.0%, WCA > 60.0°, and EB > 30.0% in the coating materials. CRFs with different nutrient release periods can be designed according to the recommended values to meet the needs of different crops. Furthermore, our experiments have illustrated that the N release period target of 30 days can be reached for modified sulfur-coated fertilizers (MSCFs) by improving their mechanical properties.

Biorenewable Oxypropylated Pentane-1,2,5-triol as a Source for Incorporation in Rigid Polyurethane Foams

In this study, as a product from the efficient Achmatowicz rearrangement and mild subsequent hydrogenation-reduction reactions of biorenewable C5 alcohols derived from lignocellulose, pentane-1,2,5-triol was successfully used after oxypropylation in the preparation of rigid polyurethane foams-one of the most important classes of polymeric materials. Despite the broad range of applications, the production of polyurethanes is still highly dependent on petrochemical materials considering the need of renewable raw materials and new process technologies for the production of polyol or isocyanate components as a key point for the sustainable development of polyurethane foams. The synthesized oxypropylated pentane-1,2,5-triol was analyzed using proton NMR spectroscopy, hydroxyl number, and viscosity, whereas the newly obtained foams incorporated with up to 30% biorenewable polyol were characterized using compressive stress, thermogravimetry, dynamic mechanical analysis, and scanning electron microscopy. The modified rigid polyurethanes showed better compressive strength (>400.0 kPa), a comparable thermal degradation range at 325-450 °C, and similar morphological properties to those of commercial polyurethane formulations.

Recent Advances in Biodegradable and Biocompatible Synthetic Polymers Used in Skin Wound Healing

The treatment of skin wounds caused by trauma and pathophysiological disorders has been a growing healthcare challenge, posing a great economic burden worldwide. The use of appropriate wound dressings can help to facilitate the repair and healing rate of defective skin. Natural polymer biomaterials such as collagen and hyaluronic acid with excellent biocompatibility have been shown to promote wound healing and the restoration of skin. However, the low mechanical properties and fast degradation rate have limited their applications. Skin wound dressings based on biodegradable and biocompatible synthetic polymers can not only overcome the shortcomings of natural polymer biomaterials but also possess favorable properties for applications in the treatment of skin wounds. Herein, we listed several biodegradable and biocompatible synthetic polymers used as wound dressing materials, such as PVA, PCL, PLA, PLGA, PU, and PEO/PEG, focusing on their composition, fabrication techniques, and functions promoting wound healing. Additionally, the future development prospects of synthetic biodegradable polymer-based wound dressings are put forward. Our review aims to provide new insights for the further development of wound dressings using synthetic biodegradable polymers.