Protic ionic liquids-promoted efficient synthesis of quinazolines from 2-aminobenzonitriles and CO 2 at ambient conditions

Ionic Liquid-Catalyzed CO2 Conversion for Valuable Chemicals

CO2 is not only the main gas that causes the greenhouse effect but also a resource with abundant reserves, low price, and low toxicity. It is expected to become an important "carbon source" to replace oil and natural gas in the future. The efficient and clean resource utilization of CO2 has shown important scientific and economic value. Making full use of abundant CO2 resources is in line with the development direction of green chemistry and has attracted the attention of scientists. Environmentally friendly ionic liquids show unique advantages in the capture and conversion of CO2 due to their non-volatilization, designable structure, and good solubility, and show broad application prospects. The purpose of this paper is to discuss the research on the use of an ionic liquid as a catalyst to promote the synthesis of various value-added chemicals in CO2, hoping to make full use of CO2 resources while avoiding the defects of the traditional synthesis route, such as the use of highly toxic raw materials, complicated operation, or harsh reaction conditions. The purpose of this paper is to provide reference for the application and development of ionic liquids in CO2 capture and conversion.

Tuning Ionic Liquid-Based Catalysts for CO2 Conversion into Quinazoline-2,4(1H,3H)-diones

Carbon capture and storage (CCS) and carbon capture and utilization (CCU) are two kinds of strategies to reduce the CO2 concentration in the atmosphere, which is emitted from the burning of fossil fuels and leads to the greenhouse effect. With the unique properties of ionic liquids (ILs), such as low vapor pressures, tunable structures, high solubilities, and high thermal and chemical stabilities, they could be used as solvents and catalysts for CO2 capture and conversion into value-added chemicals. In this critical review, we mainly focus our attention on the tuning IL-based catalysts for CO2 conversion into quinazoline-2,4(1H,3H)-diones from o-aminobenzonitriles during this decade (2012~2022). Due to the importance of basicity and nucleophilicity of catalysts, kinds of ILs with basic anions such as [OH], carboxylates, aprotic heterocyclic anions, etc., for conversion CO2 and o-aminobenzonitriles into quinazoline-2,4(1H,3H)-diones via different catalytic mechanisms, including amino preferential activation, CO2 preferential activation, and simultaneous amino and CO2 activation, are investigated systematically. Finally, future directions and prospects for CO2 conversion by IL-based catalysts are outlined. This review is benefit for academic researchers to obtain an overall understanding of the synthesis of quinazoline-2,4(1H,3H)-diones from CO2 and o-aminobenzonitriles by IL-based catalysts. This work will also open a door to develop novel IL-based catalysts for the conversion of other acid gases such as SO2 and H2S.

Room-temperature conversion of CO2 into quinazoline-2,4(1H,3H)-dione using deep eutectic solvents at atmospheric pressure with high efficiency

Deep eutectic solvents are found to catalyze CO2 conversion to quinazoline-2,4(1H,3H)-dione at room temperature and atmospheric pressure with nearly 100% yields for the first time.

Carboxylation of terminal alkynes with CO2 catalyzed by imidazolium-bridged bis(phenolato) rare-earth metal complexes

An imidazolium-bridged bis(phenolato) yttrium complex shows excellent catalytic reactivity in the direct carboxylation of terminal alkynes and further one-pot three-component esterification.

The room-temperature, ambient-pressure conversion of CO2 into value-added pharmaceutical products quinazoline-2,4(1H,3H)-diones

As global warming due to CO₂ emissions has become a widely recognized concern, CO₂ capture, sequestration, neutralization, and conversion have become possible solutions to address this concern. Among these approaches, the conversion of CO₂ into fuels or value-added products has attracted considerable attention. In this work, we report the high-efficiency conversion of CO₂ to important industrial raw materials for pharmaceutical compounds, quinazoline-2,4(1H,3H)-diones, via reactions with 2-aminobenzonitriles at room temperature and under ambient pressure, with high conversion yields (91.5-99.3%). 1,8-Diazabicyclo-[5.4.0]-undec-7-ene (DBU), 1,1,3,3-tetramethylguanidine (TMG), and cholinium (Ch) ammonium-based ionic liquids (ILs) are employed as catalysts during the process. Cations with a pK_a value near 11.9 and anions with a pK_a value range of 10 to 15 are necessary for the reaction. The experimental results indicate that the ionic liquid pair [HDBU⁺][3-Cl-PhO^-] has high efficiency under very mild conditions, obtaining high product yields of 91.5% at 25 °C and 1 atm and 99.3% at 30 °C and 1 atm. More importantly, the catalysts retain high efficiency and activity after 5 consecutive cycles. To gain insightful understanding of the reaction, density functional theory (DFT) calculations were conducted to study the reaction mechanism. The computational results indicate that the catalytic process contains three stages: cyano activation, intramolecular rearrangement, and intramolecular cyclization. Of these, the rate-determining step is cyano activation, which shows an energy barrier of 24.5 kcal mol^-1. Tuning the types of ions in ILs can effectively reduce this energy barrier and allow high efficiencies.

Alcohol amine-catalyzed CO2 conversion for the synthesis of quinazoline-2,4-(1H,3H)-dione in water

The conversion of CO₂ to high value-added chemicals in water using environment-friendly and cost-effective catalysts is a very significant topic. In this work, a green method for the conversion of CO₂ catalyzed by alcohol amines has been developed. Alcohol amines showed considerable activating ability to CO₂ in the cyclization with 2-aminobenzonitrile to quinazoline-2,4(1H,3H)-dione in water. Notably, when diethanolamine (DEA) was used as the catalyst, 94% yield of quinazoline-2,4-(1H,3H)-dione could be achieved. A plausible mechanism has been proposed based on the ¹H NMR, FT-IR analysis and DFT calculation. The excellent catalytic performance is attributed to the combined effect of both the secondary amine and hydroxyl groups on alcohol amines with the assistance of water in the formation of carbamate. Water plays a bi-functional role of solvent and co-catalyst in this catalytic process. Catalysts can be easily recovered and reused five times without significant loss of activity.

DBU coupled ionic liquid-catalyzed efficient synthesis of quinazolinones from CO2 and 2-aminobenzonitriles under mild conditions

Efficient and green strategy for the chemical conversion and fixation of CO2 is an attractive topic. In this work, we reported an efficient catalytic system of organic base coupled ionic liquids that could catalyse the synthesis of quinazolinones via cyclization of 2-aminobenzonitriles with CO2 under mild conditions (e.g., 60 °C, 0.1 MPa). It was found that 1,8-diazabicyclo[5.4.0]undec-7-ene coupled 1-butyl-3-methylimidazole acetate ionic liquids (DBU/[Bmim][OAc]) displayed excellent performance in catalysing the reactions of CO2 with 2-aminobenzonitriles, and a series of quinazolinones were obtained in high yields at atmospheric pressure. Moreover, the ILs had high stability and reusability, and can be reused at least five times without considerable decrease in catalytic activity. This protocol could also be conducted on a gram scale, and may have promising and practical applications in the production of quinazolinones.

Pivotal Role of the Basic Character of Organic and Salt Catalysts in C-N Bond Forming Reactions of Amines with CO2

Organocatalysts promote a range of C-N bond forming reactions of amines with CO₂ . Herein, we review these reactions and attempt to identify the unifying features of the catalysts that allows them to promote a multitude of seemingly unrelated reactions. Analysis of the literature shows that these reactions predominantly proceed by carbamate salt formation in the form [BaseH][RR'NCOO]. The anion of the carbamate salt acts as a nucleophile in hydrosilane reductions of CO₂ , internal cyclization reactions or after dehydration as an electrophile in the synthesis of urea derivatives. The reactions are enhanced by polar aprotic solvents and can be either promoted or hindered by H-bonding interactions. The predominant role of all types of organic and salt catalysts (including ionic liquids, ILs) is the stabilization of the carbamate salt, mostly by acting as a base. Catalytic enhancement depends on the combination of the amine, the base strength, the solvent, steric factors, ion pairing and H-bonding. A linear relationship between the base strength and the reaction yield has been demonstrated with IL catalysts in the synthesis of formamides and quinazoline-2,4-diones. The role of organocatalysts in the reactions indicates that all bases of sufficient strength should be able to catalyze the reactions. However, a physical limit to the extent of a purely base catalyzed reaction mechanism should exist, which needs to be identified, understood and overcome by synergistic or alternative methods.

CO2 Capture and in situ Catalytic Transformation

The escalating rate of fossil fuel combustion contributes to excessive CO₂ emission and the resulting global climate change has drawn considerable attention. Therefore, tremendous efforts have been devoted to mitigate the CO₂ accumulation in the atmosphere. Carbon capture and storage (CCS) strategy has been regarded as one of the promising options for controlling CO₂ build-up. However, desorption and compression of CO₂ need extra energy input. To circumvent this energy issue, carbon capture and utilization (CCU) strategy has been proposed whereby CO₂ can be captured and in situ activated simultaneously to participate in the subsequent conversion under mild conditions, offering valuable compounds. As an alternative to CCS, the CCU has attracted much concern. Although various absorbents have been developed for the CCU strategy, the direct, in situ chemical conversion of the captured CO₂ into valuable chemicals remains in its infancies compared with the gaseous CO₂ conversion. This review summarizes the recent progress on CO₂ capture and in situ catalytic transformation. The contents are introduced according to the absorbent types, in which different reaction type is involved and the transformation mechanism of the captured CO₂ and the role of the absorbent in the conversion are especially elucidated. We hope this review can shed light on the transformation of the captured CO₂ and arouse broad concern on the CCU strategy.

Catalytic Conversion of Carbon Dioxide through C-N Bond Formation

From the viewpoint of green chemistry and sustainable development, it is of great significance to synthesize chemicals from CO₂ as C₁ source through C-N bond formation. During the past several decade years, many studies on C-N bond formation reaction were involved, and many efforts have been made on the theory. Nevertheless, several great challenges such as thermodynamic limitation, low catalytic efficiency and selectivity, and high pressure etc. are still suffered. Herein, recent advances are highlighted on the development of catalytic methods for chemical fixation of CO₂ to various chemicals through C-N bond formation. Meanwhile, the catalytic systems (metal and metal-free catalysis), strategies and catalytic mechanism are summarized and discussed in detail. Besides, this review also covers some novel synthetic strategies to urethanes based on amines and CO₂. Finally, the regulatory strategies on functionalization of CO₂ for N-methylation/N-formylation of amines with phenylsilane and heterogeneous catalysis N-methylation of amines with CO₂ and H₂ are emphasized.

Ionic Liquids Catalysis for Carbon Dioxide Conversion With Nucleophiles

Carbon dioxide, as a promising C₁ synthon, has attracted great interest in organic synthesis. Due to the thermodynamic stability and kinetic inertness of CO₂, developing efficient strategies for CO₂ activation and subsequent conversion is very crucial. In this context, Ionic liquids (ILs) show great potential for capturing and activating CO₂ owing to their unique structures and properties, making them become ideal alternatives to volatile organic solvents and/or catalysts for CO₂ transformation. This minireview aims at summarizing ILs-promoted reactions of CO₂ with N-nucleophiles (primary amines)/O-nucleophiles (primary alcohols, water). Two catalytic systems i.e., metal/ILs binary systems such as Cu/ILs systems and Ag/ILs systems as well as single ILs systems including anion-functionalized ILs and bifunctionalized ILs have been developed for CO₂ catalytic conversion, for instance, carboxylative cyclization of nucleophiles e.g., propargylic alcohols, amines, 2-aminobenzonitriles and o-aminobenzenethiol, and formylation of amines or 2-aminothiophenols with hydrosilanes to afford various value-added chemicals e.g., cyclic carbamates, unsymmetrical organic carbonates, α-hydroxyl ketones, and benzimidazolones. In a word, IL could provide a powerful tool for efficient CO₂ utilization.

Unexpected solvation-stabilisation of ions in a protic ionic liquid: insights disclosed by a bond energetic study

Equilibrium acidities (pK_as) of 42 organic acids were precisely determined in protic ionic liquid (PIL) [DBUH][OTf]. Surprisingly, the often seen homoassociation complication during the pK_a measurement of O-H acids in DMSO was not detected in [DBUH][OTf], implying that the incipient oxanion should be better solvation-stabilized by the PIL, although its "apparent" dielectric constant is much lower than that of the conventional molecular solvent DMSO. Evidence showing that the solute ions in the PIL are also free from other specific ion associations like ion-pairing is further demonstrated by the identical pK_as of protic amine salts bearing largely different counter-anions. Correlations between the RO-H, N-H, N⁺-H and RCOO-H bond acidities in [DBUH][OTf] and in water revealed different slopes and intercepts for each individual series, suggesting far superior properties of the DBUH⁺-based PIL for differentiating the solvation effect of various species in structural analysis to the well applied EAN that is known for leveling out differential solvation.

New crown ether complex cation ionic liquids with N-heterocycle anions: preparation and application in CO2 fixation

A series of CECILs have been devised, synthesized and characterized by NMR, IR, elemental analysis and TGA-DSC.

Synthesis of Ureas from CO2

Ureas are an important class of bioactive organic compounds in organic chemistry and exist widely in natural products, agricultural pesticides, uron herbicides, pharmaceuticals. Even though urea itself has been synthesized from CO₂ and ammonia for a long time, the selective and efficient synthesis of substituted ureas is still challenging due to the difficulty of dehydration processes. Efficient and economic fixation of CO₂ is of great importance in solving the problems of resource shortages, environmental issues, global warming, etc. During recent decades, chemists have developed different catalytic systems to synthesize ureas from CO₂ and amines. Herein, we focus on catalytic synthesis of ureas using CO₂ and amines.