Protonated triethanolamine as multi-hydrogen bond donors catalyst for efficient cycloaddition of CO2 to epoxides under mild and cocatalyst-free conditions

Synthesis of Functionalized Five-Membered Heterocycles from Epoxides: A Hydrogen-Bond Donor Catalytic Approach

The synthesis of highly functionalized five-membered oxa- and aza-heterocycles has been reported utilizing hydrogen-bond donor (HBD) catalysis. In this method, an epoxide was taken as a substrate and reacted with functionalized arylidene/alkylidene malononitrile derivatives in the presence of a newly designed HBD catalyst. In all the cases, the products 2,5-disubstituted tetrahydrofurans (2,5-THFs) were obtained in good to excellent yields (up to 86%) with high diastereoselectivity (dr up to 99:1) as a single regioisomer. The stereochemistry at the 2- and 5-positions of the five-membered ring has been confirmed by single-crystal X-ray analysis, and cis is found to be the major product. The same strategy has been further utilized to obtain substituted oxazolidines whenever the epoxide has been reacted with isocyanate as an electrophile. In order to induce enantioselectivity, a chiral epoxide has been reacted with both the electrophiles in the presence of the same catalyst system to afford the single stereoisomer of the final products. This synthetic methodology involves a low catalyst loading and ambient reaction condition and has been generalized with various substituents present in the starting electrophiles to produce the resultant products in acceptable yields and stereoselectivity.

Pyridinium-Inspired Organocatalysts for Carbon Dioxide Fixation: A Density Functional Theory Inspection

The current project aims to apply the virtues of minimalism to examine the catalytic ability of commercially organic compounds of small chemical structures to catalyze the coupling reaction between carbon dioxide and propylene oxide (PO) under mild conditions. The proposed catalysts are pyridinium iodide (A), 2-hydroxypyridinium iodide (B), and piperidinium iodide (C), where their structure is based on cooperative acidic and nucleophilic motifs. The quantum chemistry model, M062X-D3/def2-TZVP//M062X-D3/def2-SVPP, was used to understand the reaction mechanism and the catalytic performance. Since the coupling reaction was performed under excess PO, we proposed that PO serves as a reactant and solvent. Therefore, calculations were performed in gas and liquid phases for comparison. The findings indicated that the rate-determining step depends on the chemical structure of the catalyst and whether the phase is a gas or liquid phase. In general, modeling in the liquid phase produces potential energy surfaces of lower energy barriers. The noncovalent interactions reflect the role of hydrogen bonding in controlling the kinetic behavior of the coupling reaction. Based on the finding, catalyst A is the best candidate for transforming CO₂ into cyclic carbonates.

Facet Engineering in Constructing Lewis Acid-Base Pairs for CO2 Cycloaddition to High Value-Added Carbonates

Cycloaddition of epoxides with CO₂ to synthesis cyclic carbonates is an atom-economic pathway for CO₂ utilization with promising industry application value, while its efficiency was greatly inhibited for the lack of highly active catalytic sites. Herein, by taking BiOX (X = Cl, Br) with layered structure for example, we proposed a facet engineering strategy to construct Lewis acid-base pairs for CO₂ cycloaddition, where the typical BiOBr with (010) facets expose surface Lewis acid Bi sites and Lewis base Br sites simultaneously. By the combination of in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and theoretical calculations, the oxygen atom of the epoxide is interacted with the Lewis acid Bi site to activate the ternary ring, then facilitates the attack of the carbon atom by the Lewis base Br site for the ring-opening of the epoxide, which is the rate-determining step in the cycloaddition reaction. As a result, the BiOBr-(010) with rich surface Lewis acid-base pairs showed a high conversion of 85% with 100% atomic economy in the synthesis of cyclic-carbonates without any cocatalyst. This study provides a model structure for CO₂ cycloaddition to high value-added long chain chemicals.

Utilization of CO2-Available Organocatalysts for Reactions with Industrially Important Epoxides

Recent knowledge in chemistry has enabled the material utilization of greenhouse gas (CO2) for the production of organic carbonates using mild reaction conditions. Organic carbonates, especially cyclic carbonates, are applicable as green solvents, electrolytes in batteries, feedstock for fine chemicals and monomers for polycarbonate production. This review summarizes new developments in the ring opening of epoxides with subsequent CO2-based formation of cyclic carbonates. The review highlights recent and major developments for sustainable CO2 conversion from 2000 to the end of 2021 abstracted by Web of Science. The syntheses of epoxides, especially from bio-based raw materials, will be summarized, such as the types of raw material (vegetable oils or their esters) and the reaction conditions. The aim of this review is also to summarize and to compare the types of homogeneous non-metallic catalysts. The three reaction mechanisms for cyclic carbonate formation are presented, namely activation of the epoxide ring, CO2 activation and dual activation. Usually most effective catalysts described in the literature consist of powerful sources of nucleophile such as onium salt, of hydrogen bond donors and of tertiary amines used to combine epoxide activation for facile epoxide ring opening and CO2 activation for the subsequent smooth addition reaction and ring closure. The most active catalytic systems are capable of activating even internal epoxides such as epoxidized unsaturated fatty acid derivatives for the cycloaddition of CO2 under relatively mild conditions. In case of terminal epoxides such as epichlorohydrin, the effective utilization of diluted sources of CO2 such as flue gas is possible using the most active organocatalysts even at ambient pressure.

Novel porous organic polymers functionalized by metalloporphyrin and phosphonium salts for the efficient synergistic catalysis of CO2 conversion under mild conditions

Metalloporphyrin- and phosphonium-functionalized porous organic polymers (POPs) were fabricated successfully via a post-synthesis modification strategy, which were demonstrated to be efficient heterogeneous catalysts for CO2 conversion.

A DFT-design of single component bifunctional organocatalysts for the carbon dioxide/propylene oxide coupling reaction

The aim of this work is to develop single-component bifunctional organic catalysts capable of effective coupling reactions between CO2 and propylene epoxide (PO) under mild conditions using density functional theory (DFT) calculations. The dual functionalities of the target catalysts come from their inclusion of a hydroxyl-containing electrophile and the nucleophilicity of iodide ion. In this respect, a series of hydroxyl-functionalized quaternary onium-based ionic liquids were studied using M062X-D3/def2-TZVP//M062X-D3/def2-SVPP model chemistry. The design of catalysts was based on tailoring two structural factors; the first one is the onium center of pnictogens (N, P, As, Sb and Bi), and the second one is the number of hydrogen bond donor groups (n = 1-3). The proposed catalysts were examined by investigation of their catalytic mechanisms to afford the cyclic carbonate. Additionally, the highest active transition state, along with the potential energy difference, was examined using non-covalent interaction (NCI) analysis. Also, the activation strain model (ASM) was used to explain the kinetic behavior of PO activation. The findings showed that the ring-opening step of PO is always the critical step of the reaction. Among the suggested catalysts, the results indicated that the dihydroxyl ammonium-based catalyst (2OH-NI) is a good choice for this catalysis under mild and solvent-free conditions.

Mechanistic insights on CO2 utilization using sustainable catalysis

Caffeinium halides were used to catalyse the cycloaddition of CO2 to form cyclic carbonates. The reaction intermediates were isolated and characterized experimentally. The reaction mechanism has been confirmed by DFT calculations.

Recent advances in ionic liquids-based hybrid processes for CO2 capture and utilization

CO₂ capture and utilization (CCU) is an effective strategy to mitigate global warming. Absorption, adsorption and membranes are methods used for CO₂ separation and capture, and various catalytic pathways have also been developed for CO₂ utilization. Although widely researched and used in industry, these processes are energy-intensive and this challenge needs to be overcome. To realize further optimization, novel materials and processes are continuously being developed. New generation materials such as ionic liquids (ILs) have shown promising potential for cost-effective CO₂ capture and utilization. This study reviews the current status of ILs-based solvents, adsorbents, membranes, catalysts and their hybrid processes for CO₂ capture and utilization. The special properties of ILs are integrated into new materials through hybridization, which significantly improves the performance in the process of CCU.

Sulfur-containing amino acid-derived ionic liquid as a halogen-free catalyst for CO2 mild transformation into cyclic carbonates

A novel [DBUH]2[Cys] IL containing–S− anion was synthesized and used to catalyze the reactions of CO2 and epoxides under mild conditions.

Phosphonium-Based Porous Ionic Polymer with Hydroxyl Groups: A Bifunctional and Robust Catalyst for Cycloaddition of CO2 into Cyclic Carbonates

The integration of synergic hydrogen bond donors and nucleophilic anions that facilitates the ring-opening of epoxide is an effective way to develop an active catalyst for the cycloaddition of CO₂ with epoxides. In this work, a new heterogeneous catalyst for the cycloaddition of epoxides and CO₂ into cyclic carbonates based on dual hydroxyls-functionalized polymeric phosphonium bromide (PQPBr-2OH) was presented. Physicochemical characterizations suggested that PQPBr-2OH possessed large surface area, hierarchical pore structure, functional hydroxyl groups, and high density of active sites. Consequently, it behaved as an efficient, recyclable, and metal-free catalyst for the additive and solvent free cycloaddition of epoxides with CO₂. Comparing the activity of PQPBr-2OH with that of the reference catalysts based on mono and non-hydroxyl functionalized polymeric phosphonium bromides suggested that hydroxyl functionalities in PQPBr-2OH showed a critical promotion effect on its catalytic activity for CO₂ conversion. Moreover, PQPBr-2OH proved to be quite robust and recyclable. It could be reused at least ten times with only a slight decrease of its initial activity.

Facile synthesis of crystalline viologen-based porous ionic polymers with hydrogen-bonded water for efficient catalytic CO2 fixation under ambient conditions

In this work, we report a series of crystalline viologen-based porous ionic polymers (denoted VIP-X, X = Cl or Br), that have in situ formed dicationic viologens paired with halogen anions and intrinsic hydrogen-bonded water molecules, towards metal-free heterogeneous catalytic conversion of carbon dioxide (CO₂) under mild conditions. The targeted VIP-X materials were facilely constructed via the Menshutkin reaction of 4,4′-bipyridine with 4,4′-bis(bromomethyl)biphenyl (BCBMP) or 4,4′-bis(chloromethyl)biphenyl (BBMBP) monomers. Their crystalline and porous structures, morphological features and chemical structures and compositions were fully characterized by various advanced techniques. The optimal catalyst VIP-Br afforded a high yield of 99% in the synthesis of cyclic carbonate by CO₂ cycloaddition with epichlorohydrin under atmospheric pressure (1 bar) and a low temperature (40 °C), while other various epoxides could be also converted into cyclic carbonates under mild conditions. Moreover, the catalyst VIP-Br could be separated easily and reused with good stability. The remarkable catalytic performance could be attributed to the synergistic effect of the enriched Br⁻ anions and available hydrogen bond donors –OH groups coming from H-bonded water molecules.

Viologen-based porous ionic polymers with halogen anions and hydrogen-bonded water were constructed for efficient catalytic CO₂ fixation under mild conditions.

Pyridine-bridged bifunctional organocatalysts for the synthesis of cyclic carbonates from carbon dioxide

Hydroxyl- and carboxyl-functionalized imidazolium halides are used as efficient bifunctional organocatalysts for the synthesis of cyclic carbonates from CO2 and epoxides under mild reaction conditions. Control experiments suggest that the cycloaddition reaction is realized by the combination of the nucleophilic halide anions with hydroxyl and carboxyl groups as hydrogen bond donors. Moreover, the bifunctional organocatalysts can be easily recycled five times by simple filtration; however, a loss of activity was observed.

Organocatalyzed coupling of carbon dioxide with epoxides for the synthesis of cyclic carbonates: catalyst design and mechanistic studies

The coupling of carbon dioxide (CO₂) with epoxides with the formation of cyclic carbonates is a highly attractive 100% atom economic reaction. It represents a greener and safer alternative to the conventional synthesis of cyclic carbonates from diols and toxic phosgene.