Continuous photosynthetic abatement of CO2 and volatile organic compounds from exhaust gas coupled to wastewater treatment: Evaluation of tubular algal-bacterial photobioreactor

Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Advanced treatment of toluene emissions with a cutting-edge algal bacterial photo-bioreactor: Performance assessment in a circular economy perspective

A novel approach for the treatment of VOCs (by using toluene used as a model compound) and the simultaneous conversion of carbon dioxide into valuable biomass has been investigated by using a combination of an activated sludge moving bed bioreactor (MBBR) and an algal photo-bioreactor (PBR). The first unit (MBBR, R1) promoted toluene removal up to 99.9 % for inlet load (IL) of 119.91 g m^-3 d^-1. The CO₂ resulting from the degradation of toluene was then fixed in PBR (R2), with a fixation rate up to 95.8 %. The CO₂ uptake was promoted by algae, with average production of algal biomass in Stage VI of 1.3 g L^-1 d^-1. In the contest of the circular economy, alternative sources of nutrients have been assessed, using synthetic urban wastewater (UWW) and dairy wastewater (DWW) for liquid renewal. The produced biomass with DWW showed a high lipid content, with a maximum productivity of 450.25 mg of lipids L^-1 d^-1. The solution proposed may be thus regarded as a sustainable and profitable strategy for VOCs treatment in a circular economy perspective.

Microalgal cultivation for the upgraded biogas by removing CO2, coupled with the treatment of slurry from anaerobic digestion: A review

Biogas is the gaseous by product generated from anaerobic digestion (AD), which is mainly composed of methane and CO2. Numerous independent studies have suggested that microalgae cultivation could achieve high efficiency for nutrient uptake or CO2 capture from AD, respectively. However, there is no comprehensive review on the purifying slurry from AD and simultaneously upgrading biogas via microalgal cultivation technology. This paper aims to fill this gap by presenting and discussing an information integration system based on microalgal technology. Furthermore, the review elaborates the mechanisms, configurations, and influencing factors of integrated system and analyzes the possible challenges for practical engineering applications and provides some feasibility suggestions eventually. There is hope that this review will offer a worthwhile and practical guideline to researchers, authorities and potential stakeholders, to promote this industry for sustainable development.

Microalgal-Bacterial Consortia as Future Prospect in Wastewater Bioremediation, Environmental Management and Bioenergy Production

In the recent years, microalgae have captured researchers' attention as the alternative feedstock for various bioenergy production such as biodiesel, biohydrogen, and bioethanol. Cultivating microalgae in wastewaters to simultaneously bioremediate the nutrient-rich wastewater and maintain a high biomass yield is a more economical and environmentally friendly approach. The incorporation of algal-bacterial interaction reveals the mutual relationship of microorganisms where algae are primary producers of organic compounds from CO₂, and heterotrophic bacteria are secondary consumers decomposing the organic compounds produced from algae. This review would provide an insight on the challenges and future development of algal-bacterial consortium and its contribution in promoting a sustainable route to greener industry. It is believed that microalgal-bacterial consortia will be implemented in the near-future for sub-sequential treatment of wastewater bioremediation, bioenergy production and CO₂ fixation, promoting sustainability and making extraordinary advancement in life sciences sectors.

Effects of substrate stress and light intensity on enhanced biological phosphorus removal in a photo-activated sludge system

Photo-activated sludge (PAS) systems are an emerging wastewater treatment technology where microalgae provide oxygen to bacteria without the need for external aeration. There is limited knowledge on the optimal conditions for enhanced biological phosphorus removal (EBPR) in systems containing a mixture of polyphosphate accumulating organisms (PAOs) and microalgae. This research aimed to study the effects of substrate composition and light intensity on the performance of a laboratory-scale EBPR-PAS system. Initially, a model-based design was developed to study the effect of organic carbon (COD), inorganic carbon (HCO₃) and ammonium-nitrogen (NH₄-N) in nitrification deprived conditions on phosphorus (P) removal. Based on the mathematical model, two different synthetic wastewater compositions (COD:HCO₃:NH₄-N: 10:20:1 and 10:10:4) were examined at a light intensity of 350 µmol m^-2 sec^-1. Add to this, the performance of the system was also investigated at light intensities: 87.5, 175, and 262.5 µmol m^-2 sec^-1 for short terms. Results showed that wastewater having a high level of HCO₃ and low level of NH₄-N (ratio of 10:20:1) favored only microalgal growth, and had poor P removal due to a shortage of NH₄-N for PAOs growth. However, lowering the HCO₃ level and increasing the NH₄-N level (ratio of 10:10:4) balanced PAOs and microalgae symbiosis, and had a positive influence on P removal. Under this mode of operation, the system was able to operate without external aeration and achieved a net P removal of 10.33 ±1.45 mg L^-1 at an influent COD of 100 mg L^-1. No significant variation was observed in the reactor performance for different light intensities, indicating the EBPR-PAS system can be operated at low light intensities with a positive influence on P removal.

A state-of-the-art review on indoor air pollution and strategies for indoor air pollution control

Indoor air pollution has traditionally received less attention than outdoors pollution despite indoors pollutant levels are typically twice higher, and people spend 80-90% of their life in increasing air-tight buildings. More than 5 million people die every year prematurely from illnesses attributable to poor indoor air quality, which also causes multi-millionaire losses due to reduced employee's productivity, material damages and increased health system expenses. Indoor air pollutants include particulate matter, biological pollutants and over 400 different chemical organic and inorganic compounds, whose concentrations are governed by several outdoor and indoor factors. Prevention of pollutant is not always technically feasible, so the implementation of cost-effective active abatement units is required. Up to date no single physical-chemical technology is capable of coping with all indoor air pollutants in a cost-effective manner. This problem requires the use of sequential technology configurations at the expenses of superior capital and operating costs. In addition, the performance of conventional physical-chemical technologies is still limited by the low concentrations, the diversity and the variability of pollutants in indoor environments. In this context, biotechnologies have emerged as a cost-effective and sustainable platform capable of coping with these limitations based on the biocatalytic action of plants, bacteria, fungi and microalgae. Indeed, biological-based purification systems can improve the energy efficiency of buildings, while providing additional aesthetic and psychological benefits. This review critically assessed the state-of-the-art of the indoor air pollution problem and prevention strategies, along with the recent advances in physical-chemical and biological technologies for indoor pollutants abatement.

Strengthening mass transfer with the Tesla-valve baffles to increase the biomass yield of Arthrospira platensis in a column photobioreactor

In this study, the Tesla-valve (TV) baffles were used to optimize the flow field in a column photobioreactor (PBR) in order to promote mass transfer of CO₂ gas in the solution. The TV baffles were composed of many tilted plates with central holes and curved arcs facing downwards, installed along inner rising section of the column PBR. Many clockwise and anti-clockwise vortices were generated during the rising flow while passing through proposed TV baffles. An optimum TV baffle structure (30° plate angle, 8 cm arc width) decreased mixing time by 36.4% and increased the mass transfer coefficient by 50%. The TV baffles supported the movement of the A.platensis cells between light and dark regions to enhance their photochemical efficiency ϕPSII by 24.6% and Fv/Fm by 12.7%. Therefore, the biomass yield increased by 28.1% and exhibited an increased helix pitch and trichome length in comparison with traditional column PBR without baffles.

Prospects and development of algal-bacterial biotechnology in environmental management and protection

The coexistence of algae and bacteria in nature dates back to the very early stages when life came into existence. The interaction between algae and bacteria plays an important role in the planet ecology, cycling nutrients, and feeding higher trophic levels, and have been evolving ever since. The emerging concept of algal-bacterial consortia is gaining attention, much towards environmental management and protection. Studies have shown that algal-bacterial synergy does not only promote carbon capture in wastewater bioremediation but also consequently produces biofuels from algal-bacterial biomass. This review has evaluated the optimistic prospects of algal-bacterial consortia in environmental remediation, biorefinery, carbon sequestration as well as its contribution to the production of high-value compounds. In addition, algal-bacterial consortia offer great potential in bloom control, dye removal, agricultural biofertilizers, and bioplastics production. This work also emphasizes the advancement of algal-bacterial biotechnology in environmental management through the incorporation of Industry Revolution 4.0 technologies. The challenges include its pathway to greener industry, competition with other food additive sources, societal acceptance, cost feasibility, environmental trade-off, safety and compatibility. Thus, there is a need for further in-depth research to ensure the environmental sustainability and feasibility of algal-bacterial consortia to meet numerous current and future needs of society in the long run.

Biotreatment of Poultry Waste Coupled with Biodiesel Production Using Suspended and Attached Growth Microalgal-Based Systems

Poultry litter extract (PLE) was treated using a microbial consortium dominated by the filamentous cyanobacterium Leptolyngbya sp. in synergy with heterotrophic microorganisms of the poultry waste. Laboratory- and pilot-scale experiments were conducted under aerobic conditions using suspended and attached growth photobioreactors. Different dilutions of the extract were performed, leading to different initial pollutant (nitrogen, phosphorus, dissolved chemical oxygen demand (d-COD), total sugars) concentrations. Significant nutrient removal rates, biomass productivity, and maximum lipid production were determined for all the systems examined. Higher d-COD, nitrogen, phosphorus, and total sugars removal were recorded in the attached growth reactors in both laboratory- (up to 94.0%, 88.2%, 97.4%, and 79.3%, respectively) and pilot-scale experiments (up to 82.0%, 69.4%, 81.0%, and 83.8%, respectively). High total biomass productivities were also recorded in the pilot-scale attached growth experiments (up to 335.3 mg L−1d−1). The produced biomass contained up to 19.6% lipids (w/w) on a dry weight basis, while the saturated and monounsaturated fatty acids accounted for more than 70% of the total fatty acids, indicating a potential biodiesel production system. We conclude that the processing systems developed in this work can efficiently treat PLE and simultaneously produce lipids suitable as feedstock in the biodiesel manufacture.

Technology validation of photosynthetic biogas upgrading in a semi-industrial scale algal-bacterial photobioreactor

The performance of photosynthetic biogas upgrading coupled to wastewater treatment was evaluated in an outdoors high rate algal pond (HRAP) interconnected to an absorption column at semi-industrial scale. The influence of biogas flowrate (274, 370 and 459 L h^-1), liquid to biogas ratio (L/G = 1.2, 2.1 and 3.5), type of wastewater (domestic versus centrate) and hydraulic retention time in the HRAP (HRT) on the quality of the biomethane produced was assessed. The highest CO₂ and H₂S removal efficiencies (REs) were recorded at the largest L/G due to the higher biogas-liquid mass transfer at increasing liquid flowrates. No significant influence of the biogas flowrate on process performance was observed, while the type of wastewater was identified as a key operational parameter. CO₂ and H₂S-REs of 99% and 100% at a L/G_max = 3.5 were recorded using centrate. The maximum CH₄ content in the biomethane (90%) was limited by N₂ and O₂ desorption.

Long-term photosynthetic CO2 removal from biogas and flue-gas: Exploring the potential of closed photobioreactors for high-value biomass production

The long-term performance of a tubular photobioreactor interconnected to a gas absorption column for the abatement of CO₂ from biogas and flue-gas was investigated. Additionally, a novel nitrogen feast-famine regime was implemented during the flue-gas feeding stage in order to promote the continuous storage of highly-energetic compounds. Results showed effective CO₂ (~98%) and H₂S (~99%) removals from synthetic biogas, supported by the high photosynthetic activity of microalgae which resulted in an alkaline pH (~10). In addition, CO₂ removals of 99 and 91% were observed during the flue-gas operation depending on the nutrients source: mineral salt medium and digestate, respectively. A biomass productivity of ~8 g m^-2 d^-1 was obtained during both stages, with a complete nitrogen and carbon recovery from the cultivation broth. Moreover, the strategy of feeding nutrients during the dark period promoted the continuous accumulation of carbohydrates, their concentration increasing from 22% under normal nutrition up to 37% during the feast-famine cycle. This represents a productivity of ~3 g-_{carbohydrates} m^-2 d^-1, which can be further valorized to contribute to the economic sustainability of the photosynthetic CO₂ removal process.