Facile synthesis of Mo-doped TiO2 for selective photocatalytic CO2 reduction to methane: Promoted H2O dissociation by Mo doping

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Novel Nd-N/TiO2 Nanoparticles for Photocatalytic and Antioxidant Applications Using Hydrothermal Approach

In this study, photocatalysis was employed to degrade a wastewater pollutant (AB-29 dye) under visible light irradiation. For this purpose, nitrogen (N)- and neodymium (Nd)-doped TiO₂ nanoparticles were prepared using the simple hydrothermal method. X-ray diffraction (XRD) revealed an anatase phase structure of the Nd-N/TiO₂ photocatalyst, whereas properties including the surface morphology, chemical states/electronics structure and optical structure were determined using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible (UV-vis.) and photoluminescence (PL) spectroscopies. Photocatalytic testing of the prepared nanomaterials was performed to remove acid blue-29 (AB-29) dye under visible-light exposure. The prepared Nd-N/TiO₂ nanoparticles demonstrated a superior photocatalytic activity and the decolorization efficiency was about 92% after visible-light illumination for 1 h and 20 min, while N/TiO₂, Nd/TiO₂ and TiO₂ only showed a 67%, 43% and 31% decolorization efficiency, respectively. The enhanced photocatalytic activity of the Nd-N/TiO₂ photocatalyst was due to a decrease in the electron/hole's recombination and the increased absorption of TiO₂ in the visible range. The reusability results showed that the average photocatalytic activity decrease for all the samples was only about 16% after five consecutive cycles, indicating a good stability of the prepared nanomaterials. Moreover, the radical scavenging activity of the prepared nanomaterials was evaluated using the DPPH method. The novel Nd-N/TiO₂ exhibited a higher antioxidant activity compared to all the other samples.

Photoreduction of carbon dioxide and photodegradation of organic pollutants using alkali cobalt oxides MCoO2 (M = Li or Na) as catalysts

The recycling of lithium batteries should be prioritized, and the use of discarded alkali metal battery electrode materials as photocatalysts merits research attention. This study synthesized alkali metal cobalt oxide (MCoO₂, M = Li or Na) as a photocatalyst for the photoreduction of CO₂ and degradation of toxic organic substances. The optimized NaCoO₂ and LiCoO₂ photocatalysts increased the photocatalytic CO₂-CH₄ conversion rate to 21.0 and 13.4 μmol g^-1 h^-1 under ultraviolet light irradiation and to 16.2 and 5.3 μmol g^-1 h^-1 under visible light irradiation, which is 17 times higher than that achieved by TiO₂ P25. The rate constants of the optimized reactions of crystal violet (CV) with LiCoO₂ and NaCoO₂ were 2.29 × 10^-2 and 4.35 × 10^-2 h^-1, respectively. The quenching effect of the scavengers and electron paramagnetic resonance in CV degradation indicated that active O₂^•-, ¹O₂, and h⁺ play the main role, whereas ^•OH plays a minor role for LiCoO₂. The hyperfine splitting of the DMPO-^•OH and DMPO-^•CH₃ adducts was a_N = 1.508 mT, a_Hβ = 1.478 mT and a_N = 1.558 mT, a_Hβ = 2.267 mT, respectively, whereas the hyperfine splitting of DMPO^+• was a_N = 1.475 mT. The quenching effect also indicated that active O₂^•- and h⁺ play the main role and that ^•OH and ¹O₂ play a minor role for NaCoO₂. The hyperfine splitting of the DMPO-^•OH and DMPO^+• adducts was a_N = 1.517 mT, a_Hβ = 1.489 mT and a_N = 1.496 mT, respectively. Discarded alkali metal battery electrode materials can be reused as photocatalysts to address environmental pollution.

Microwave-Assisted Solvothermal Synthesis of Mo-Doped TiO2 with Exceptional Textural Properties and Superior Adsorption Kinetics

Assigned to their outstanding physicochemical properties, TiO₂-based materials have been studied in various applications. Herein, TiO₂ doped with different Mo contents (Mo-TiO₂) was synthesized via a microwave-assisted solvothermal approach. This was achieved using titanium (IV) butoxide and molybdenum (III) chloride as a precursor and dodecylamine as a surface directing agent. The uniform effective heating delivered by microwave heating reduced the reaction time to less than 30 min, representing several orders of magnitude lower than conventional heating methods. The average particle size ranged between 9.7 and 27.5 nm and it decreased with increasing the Mo content. Furthermore, Mo-TiO₂ revealed mesoporous architectures with a high surface area ranging between 170 and 260 m² g⁻¹, which is superior compared to previously reported Mo-doped TiO₂. The performance of Mo-TiO₂ was evaluated towards the adsorption of Rhodamine B (RhB). In contrast to TiO₂, which revealed negligible adsorption for RhB, Mo-doped samples depicted rapid adsorption for RhB, with a rate that increased with the increase in Mo content. Additionally, Mo-TiO₂ expressed enhanced adsorption kinetics for RhB compared to state-of-the-art adsorbents. The introduced synthesis procedure holds a grand promise for the versatile synthesis of metal-doped TiO₂ nanostructures with outstanding physicochemical properties.

Challenges and prospects in the selective photoreduction of CO2 to C1 and C2 products with nanostructured materials: a review

Solar fuel generation through CO₂ hydrogenation is the ultimate strategy to produce sustainable energy sources and alleviate global warming. The photocatalytic CO₂ conversion process resembles natural photosynthesis, which regulates the ecological systems of the earth. Currently, most of the work in this field has been focused on boosting efficiency rather than controlling the distribution of products. The structural architecture of the semiconductor photocatalyst, CO₂ photoreduction process, product analysis, and elucidating the CO₂ photoreduction mechanism are the key features of the photoreduction of CO₂ to generate C1 and C2 based hydrocarbon fuels. The selectivity of C1 and C2 products during the photocatalytic CO₂ reduction have been ameliorated by suitable photocatalyst design, co-catalyst, defect states, and the impacts of the surface polarisation state, etc. Monitoring product selectivity allows the establishment of an appropriate strategy to generate a more reduced state of a hydrocarbon, such as CH₄ or higher carbon (C2) products. This article concentrates on studies that demonstrate the production of C1 and C2 products during CO₂ photoreduction using H₂O or H₂ as an electron and proton source. Finally, it highlights unresolved difficulties in achieving high selectivity and photoconversion efficiency of CO₂ in C1 and C2 products over various nanostructured materials.

Application of Porous Materials for CO2 Reutilization: A Review

CO2 reutilization processes contribute to the mitigation of CO2 as a potent greenhouse gas (GHG) through reusing and converting it into economically valuable chemical products including methanol, dimethyl ether, and methane. Solar thermochemical conversion and photochemical and electrochemical CO2 reduction processes are emerging technologies in which solar energy is utilized to provide the energy required for the endothermic dissociation of CO2. Owing to the surface-dependent nature of these technologies, their performance is significantly reliant on the solid reactant/catalyst accessible surface area. Solid porous structures either entirely made from the catalyst or used as a support for coating the catalyst/solid reactants can increase the number of active reaction sites and, thus, the kinetics of CO2 reutilization reactions. This paper reviews the principles and application of porous materials for CO2 reutilization pathways in solar thermochemical, photochemical, and electrochemical reduction technologies. Then, the state of the development of each technology is critically reviewed and evaluated with the focus on the use of porous materials. Finally, the research needs and challenges are presented to further advance the implementation of porous materials in the CO2 reutilization processes and the commercialization of the aforementioned technologies.

Constructing a Z-Scheme Heterojunction Photocatalyst of GaPO4/α-MoC/Ga2O3 without Mingling Type-II Heterojunction for CO2 Reduction to CO

Constructing Z-scheme heterojunction photocatalysts is a prevalent strategy to prolong the lifetime of photoinduced charge carriers without reducing their redox potentials. Nevertheless, these photocatalysts were usually mingled with type-II heterojunction, leading to a decrease in the redox potentials of photoinduced charge carriers. Herein, based on the absolute electronegativity of semiconductors, a Z-scheme heterojunction photocatalyst of GaPO₄/α-MoC/Ga₂O₃ was designed and successfully constructed, in which the formation of type-II heterojunction was prevented between GaPO₄ and Ga₂O₃. In the GaPO₄/α-MoC/Ga₂O₃ photocatalyst, the conduction band (CB) and valance band (VB) potentials and the Fermi level of Ga₂O₃ are higher than those of GaPO₄, respectively. Under irradiation, photoinduced electrons on the CB of GaPO₄ migrate to the electron mediator α-MoC and subsequently recombine with the photoinduced holes of Ga₂O₃, thereby retaining the photoinduced charge carriers with higher redox potentials. As a result, GaPO₄/α-MoC/Ga₂O₃ exhibits a 4-fold enhancement of activity for CO₂ photoreduction, compared to Ga₂O₃. Photocatalytic mechanism studies indicate that superoxide radicals might be an important intermediate for CO₂ reduction to CO. The present work supplies a paradigm to construct a Z-scheme heterostructure without mingling type-II heterojunction via energy band engineering.

Cocatalysts from types, preparation to applications in the field of photocatalysis

With the rapid development of society, the burden of energy and the environment is becoming more and more serious. Photocatalytic hydrogen production, the photosynthesis of organic fuel, and the photodegradation of pollutants are three effective ways to reduce these burdens using semiconductor photocatalysts. To improve the reaction efficiency of photocatalysts, a small amount of cocatalyst is often added when photocatalysts participate in the synthesis or decomposition reaction. The addition of this small amount of cocatalyst is like a finishing touch, significantly increasing the activity of the photocatalysts. However, in our common study of photocatalysis, we often pay attention to the study of photocatalysts but ignore the study of cocatalysts. Herein, we summarize the recent application research on cocatalysts in the field of photocatalysis, starting from the types, preparation methods, and reaction mechanisms among others, to remind researchers of the matters needing attention when using cocatalysts.

Application of TiO2-Based Photocatalysts to Antibiotics Degradation: Cases of Sulfamethoxazole, Trimethoprim and Ciprofloxacin

The extensive application of antibiotics in human and veterinary medicine has led to their widespread occurrence in a natural aquatic environment. Global health crisis is associated with the fast development of antimicrobial resistance, as more and more infectious diseases cannot be treated more than once. Sulfamethoxazole, trimethoprim and ciprofloxacin are the most commonly detected antibiotics in water systems worldwide. The persistent and toxic nature of these antibiotics makes their elimination by conventional treatment methods at wastewater treatment plants almost impossible. The application of advanced oxidation processes and heterogeneous photocatalysis over TiO2-based materials is a promising solution. This highly efficient technology has the potential to be sustainable, cost-efficient and energy-efficient. A comprehensive review on the application of various TiO2-based photocatalysts for the degradation of sulfamethoxazole, trimethoprim and ciprofloxacin is focused on highlighting their photocatalytic performance under various reaction conditions (different amounts of pollutant and photocatalyst, pH, light source, reaction media, presence of inorganic ions, natural organic matter, oxidants). Mineralization efficiency and ecotoxicity of final products have been also considered. Further research needs have been presented based on the literature findings. Among them, design and development of highly efficient under sunlight, stable, recyclable and cost-effective TiO2-based materials; usage of real wastewaters for photocatalytic tests; and compulsory assessment of products ecotoxicity are the most important research tasks in order to meet requirements for industrial application.

Integrated nano-architectured photocatalysts for photochemical CO2 reduction

Recent advances in nanotechnology, especially the development of integrated nanostructured materials, have offered unprecedented opportunities for photocatalytic CO2 reduction. Compared to bulk semiconductor photocatalysts, most of these nanostructured photocatalysts offer at least one advantage in areas such as photogenerated carrier kinetics, light absorption, and active surface area, supporting improved photochemical reaction efficiencies. In this review, we briefly cover the cutting-edge research activities in the area of integrated nanostructured catalysts for photochemical CO2 reduction, including aqueous and gas-phase reactions. Primarily explored are the basic principles of tailor-made nanostructured composite photocatalysts and how nanostructuring influences photochemical performance. Specifically, we summarize the recent developments related to integrated nanostructured materials for photocatalytic CO2 reduction, mainly in the following five categories: carbon-based nano-architectures, metal-organic frameworks, covalent-organic frameworks, conjugated porous polymers, and layered double hydroxide-based inorganic hybrids. Besides the technical aspects of nanostructure-enhanced catalytic performance in photochemical CO2 reduction, some future research trends and promising strategies are addressed.

Metal-Organic Frameworks as a Platform for CO2 Capture and Chemical Processes: Adsorption, Membrane Separation, Catalytic-Conversion, and Electrochemical Reduction of CO2

The continuous rise in the atmospheric concentration of carbon dioxide gas (CO2) is of significant global concern. Several methodologies and technologies are proposed and applied by the industries to mitigate the emissions of CO2 into the atmosphere. This review article offers a large number of studies that aim to capture, convert, or reduce CO2 by using a superb porous class of materials (metal-organic frameworks, MOFs), aiming to tackle this worldwide issue. MOFs possess several remarkable features ranging from high surface area and porosity to functionality and morphology. As a result of these unique features, MOFs were selected as the main class of porous material in this review article. MOFs act as an ideal candidate for the CO2 capture process. The main approaches for capturing CO2 are pre-combustion capture, post-combustion capture, and oxy-fuel combustion capture. The applications of MOFs in the carbon capture processes were extensively overviewed. In addition, the applications of MOFs in the adsorption, membrane separation, catalytic conversion, and electrochemical reduction processes of CO2 were also studied in order to provide new practical and efficient techniques for CO2 mitigation.