Preparation of non-steroidal anti-inflammatory drug/β-cyclodextrin inclusion complexes by supercritical antisolvent process

Host-Guest Interactions of Caffeic Acid Phenethyl Ester with β-Cyclodextrins: Preparation, Characterization, and In Vitro Antioxidant and Antibacterial Activity

The aim of this study is to improve the solubility, chemical stability, and in vitro biological activity of caffeic acid phenethyl ester (CAPE) by forming inclusion complexes with β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (Hβ-CD) using the solvent evaporation method. The CAPE contents of the produced complexes were determined, and the complexes with the highest CAPE contents were selected for further characterization. Detailed characterization of inclusion complexes was performed by using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrospray ionization-mass spectrometry (ESI-MS). pH and thermal stability studies showed that both selected inclusion complexes exhibited better stability compared to free CAPE. Moreover, their antimicrobial activities were evaluated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) for the first time. According to the broth dilution assay, complexes with the highest CAPE content (10C/β-CD and 10C/Hβ-CD) exhibited considerable growth inhibition effects against both bacteria, 31.25 μg/mL and 62.5 μg/mL, respectively; contrarily, this value for free CAPE was 500 μg/mL. Furthermore, it was determined that the in vitro antioxidant activity of the complexes increased by about two times compared to free CAPE.

Supercritical Antisolvent Precipitation of Corticosteroids/β-Cyclodextrin Inclusion Complexes

In this study, corticosteroid-β-cyclodextrin (β-CD) inclusion complexes were prepared by using supercritical antisolvent (SAS) precipitation to enhance the dissolution rate of dexamethasone (DEX) and prednisolone (PRED), which are poorly water soluble drugs. The processing of the active principles in the absence of a carrier led to their almost complete extraction (the small amount of obtained material precipitates in the form of crystals). The coprecipitation of the ingredients in the presence of β-CD was investigated at different concentrations, pressures, and molar ratios. For both the corticosteroids, the optimized operating conditions were 40 °C, 120 bar, an equimolar ratio, and a concentration in DMSO of 20 mg/mL; these conditions led to the attainment of microparticles with mean diameters equal to 0.197 ± 0.180 μm and 0.131 ± 0.070 μm in the case of DEX and PRED, respectively. Job's method confirmed the formation of inclusion complexes with a 1/1 mol/mol ratio. Compared to the pure ingredients, the obtained powders have an improved release rate, which is about three times faster in both cases. The release curves obtained under the best operating conditions were fitted using different models. The best fitting was obtained using the Weibull model, whose parameters are compatible with a combined release mechanism involving Fickian diffusion and controlled release.

The Use of Cyclodextrin Inclusion Complexes to Increase the Solubility and Pharmacokinetic Profile of Albendazole

Albendazole is the preferred deworming drug and has strong insecticidal effects on human and animal helminth parasites, showing remarkable activity against hepatocellular carcinoma and colorectal cancer cells. However, it is classified as being in class II in the Biopharmaceutics Classification System due to its poor water solubility (0.2 mg/L) and high permeability, which make the clinical application of albendazole impractical. Through complexation with methyl-β-cyclodextrin, as the best result so far, albendazole's water solubility was increased by 150,000 times, and albendazole could be 90% released during the first 10 min. In an in vivo pharmacokinetic study, the Cmax and Tmax of the active metabolized sulfoxide were changed from 2.81 µg/mL at 3 h to 10.2 µg/mL at 6 h and the AUC0-48 was increased from 50.72 h⁎μg/mL to 119.95 h⁎μg/mL, indicating that the inclusion complex obtained can be used as a new oral therapeutic anti-anthelmintic and anti-tumor agent formulation.

Complexes of Ibuprofen Thiazolidin-4-One Derivatives with β-Cyclodextrin: Characterization and In Vivo Release Profile and Biological Evaluation

Generally, NSAIDs are weakly soluble in water and contain both hydrophilic and hydrophobic groups. One of the most widely used NSAIDs is ibuprofen, which has a poor solubility and high permeability profile. By creating dynamic, non-covalent, water-soluble inclusion complexes, cyclodextrins (CDs) can increase the dissolution rate of low aqueous solubility drugs, operating as a drug delivery vehicle, additionally contributing significantly to the chemical stability of pharmaceuticals and to reducing drug-related irritability. In order to improve the pharmacological and pharmacokinetics profile of ibuprofen, new thiazolidin-4-one derivatives of ibuprofen (4b, 4g, 4k, 4m) were complexed with β-CD, using co-precipitation and freeze-drying. The new β-CD complexes (β-CD-4b, β-CD-4g, β-CD-4k, β-CD-4m) were characterized using scanning electronic microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction and a phase solubility test. Using the AutoDock-VINA algorithm included in YASARA-structure software, we investigated the binding conformation of ibuprofen derivatives to β-CD and measured the binding energies. We also performed an in vivo biological evaluation of the ibuprofen derivatives and corresponding β-CD complexes, using analgesic/anti-inflammatory assays, as well as a release profile. The results support the theory that β-CD complexes (β-CD-4b, β-CD-4g, β-CD-4k, β-CD-4m) have a similar effect to ibuprofen derivatives (4b, 4g, 4k, 4m). Moreover, the β-CD complexes demonstrated a delayed release profile, which provides valuable insights into the drug-delivery area, focused on ibuprofen derivatives.

Investigating the Effect of Basic Amino Acids and Glucosamine on the Solubility of Ibuprofen and Piroxicam

Purpose

Poor aqueous solubility hampers the development of several compounds as pharmacological agents. Hence, preparing novel formulations with augmented absorption is a challenge in pharmaceutical industries. In this paper, we have examined the effect of basic amino acids including arginine (ARG), lysine (LYS), and glucosamine (GlucN) on the solubility of ibuprofen (IBU) and piroxicam (PXM) as drugs with limited solubility. We have also studied the effect of the dissolution media with the pH values 1.2 to 7.4.

Methods

The saturation shake-flask method was used for solubility studies in the presence of amino acids. Briefly, buffer solutions containing different concentrations of amino acids were prepared. Then, an excess amount of each drug with these buffers was shaken to reach equilibrium. After 48 hours, the upper phase was separated, and solubility was calculated by reading their UV-Vis absorbance.

Results

The results illustrated that amino acids increased solubility of both drugs with different ratios, which were pH and concentration-dependent. Solubility improved as the amount of amino acids went up, and this upward pattern was more robust with ARG than LYS. The presence of GlucN in citrate buffer significantly enhanced IBU solubility. The solubility of PXM in accompany of GlucN in water did not change significantly while in citrate buffer solubility enhanced specially at pH 6.

Conclusion

Overall, GlucN in citrate buffer and ARG in phosphate buffer could be introduced as the most suitable media for IBU and PXM solubility improvement, respectively.

Particle preparation of pharmaceutical compounds using supercritical antisolvent process: current status and future perspectives

The low aqueous solubility and subsequently slow dissolution rate, as well as the poor bioavailability of several active pharmaceutical ingredients (APIs), are major challenges in the pharmaceutical industry. In this review, the particle engineering approaches using supercritical carbon dioxide (SC CO₂) as an antisolvent are critically reviewed. The different SC CO₂-based antisolvent processes, such as the gas antisolvent process (GAS), supercritical antisolvent process (SAS), and a solution-enhanced dispersion system (SEDS), are described. The effect of process parameters such as temperature, pressure, solute concentration, nozzle diameter, SC CO₂ flow rate, solvent type, and solution flow rate on the average particle size, particle size distribution, and particle morphology is discussed from the fundamental perspective of the SAS process. The applications of the SAS process in different formulation approaches such as solid dispersion, polymorphs, cocrystallization, inclusion complexation, and encapsulation to enhance the dissolution rate, solubility, and bioavailability are critically reviewed. This review highlights some areas where the SAS process has not been adequately explored yet. This review will be helpful to researchers working in this area or planning to explore SAS process to particle engineering approaches to tackle the challenge of low solubility and subsequently slow dissolution rate and poor bioavailability.

Antioxidant, Antimicrobial, and Kinetic Studies of Β-Cyclodextrin Crosslinked with Lignin for Drug Delivery

β-Cyclodextrin was attached to lignin/lignin crosslinked by epichlorohydrin and served as a drug delivery matrix. Ketoconazole and piroxicam were added into the polymeric matrix as antifungal and anti-inflammatory agents, respectively. The percentage of drug retained ranged from 48.4% to 58.4% for ketoconazole and piroxicam, respectively. It was found that their tensile strengths increased with decreasing particle size, ranging between 59% and 71% for lignin crosslinked with β-cyclodextrin base matrix (LCD). Depending on the polymeric matrix, the drug release kinetics fit well in the Korsmeyer-Peppas model, with or without Fickian diffusion. From the materials based on the mixture of epoxidized lignin and β-cyclodextrin, the medicines were released more slowly (the release rate constant presents lower values ranging between 1.117 and 1.783), as compared with those comprising LCD (2.210-4.824). The materials were also demonstrated to have antimicrobial activity. The antioxidant activity of LCD loaded with piroxicam was found to be 23.9% greater than that of the base matrix (LCD). These findings could be useful towards β-cyclodextrin attached to lignin formulation development of drug carriers with antioxidant activity.

Testing the Protective Effects of Sulfobutylether-Βeta-Cyclodextrin (SBECD) and Sugammadex against Chlorpromazine-Induced Acute Toxicity in SH-SY5Y Cell Line and in NMRI Mice

Chlorpromazine (CPZ) is an antipsychotic drug which can cause several adverse effects and drug poisoning. Recent studies demonstrated that CPZ forms highly stable complexes with certain cyclodextrins (CDs) such as sulfobutylether-β-CD (SBECD) and sugammadex (SGD). Since there is no available antidote in CPZ intoxication, and considering the good tolerability of these CDs even if when administered parenterally, we aimed to investigate the protective effects of SBECD and SGD against CPZ-induced acute toxicity employing in vitro (SH-SY5Y neuroblastoma cells) and in vivo (zebrafish embryo) models. Our major findings and conclusions are the following: (1) both SBECD and SGD strongly relieved the cytotoxic effects of CPZ in SH-SY5Y cells. (2) SGD co-treatment did not affect or increase the CPZ-induced 24 h mortality in NMRI mice, while SBECD caused a protective effect in a dose-dependent fashion. (3) The binding constants of ligand–CD complexes and/or the in vitro protective effects of CDs can help to estimate the in vivo suitability of CDs as antidotes; however, some other factors can overwrite these predictions.

Supercritical Fluid Technologies for the Incorporation of Synthetic and Natural Active Compounds into Materials for Drug Formulation and Delivery

Various active compounds isolated from natural sources exhibit remarkable benefits, making them attractive for pharmaceutical and biomedical applications, such as antioxidant, antimicrobial, and anti-inflammatory activities, which contribute to the treatment of cardiovascular diseases, neurodegenerative disorders, various types of cancer, diabetes, and obesity. However, their major drawbacks are their reactivity, instability, relatively poor water solubility, and consequently low bioavailability. Synthetic drugs often face similar challenges associated with inadequate solubility or burst release in gastrointestinal media, despite being otherwise a safe and effective option for the treatment of numerous diseases. Therefore, drug-eluting pharmaceutical formulations have been of great importance over the years in efforts to improve the bioavailability of active compounds by increasing their solubility and achieving their controlled release in body media. This review highlights the success of the fabrication of micro- and nanoformulations using environmentally friendly supercritical fluid technologies for the processing and incorporation of active compounds. Several novel approaches, namely micronization to produce micro- and nano-sized particles, supercritical drying to produce aerogels, supercritical foaming, and supercritical solvent impregnation, are described in detail, along with the currently available drug delivery data for these formulations.

β-cyclodextrin microencapsulation enhanced antioxidant and antihyperlipidemic properties of Tunisian Periploca angustifolia roots condensed tannins in rats

This study aimed to investigate the microencapsulation of novel condensed tannins isolated from Periploca angustifolia roots, using β-cyclodextrin macrocyclic oligosaccharides, in order to enhance their antioxidant and antihyperlipidemic potentials. Scanning electron microscopy and Fourier transform infrared spectroscopy results revealed that tannin fraction was successfully included into β-cyclodextrin cavities proved with an encapsulation efficacy of 70%. Our in vitro findings highlighted that both pure and encapsulated tannins have efficient inhibition capacities of pancreatic lipase activity. However, the inclusion complex has the greatest, in vivo, antioxidant, and antihyperlipidemic effects. In fact, results showed that complexed tannins had markedly restored serum lipid biomarkers, lipid peroxidation, protein carbonyl oxidation, and antioxidant enzyme defense. These findings were additionally confirmed by aortic and myocardial muscle sections of histological examination. Consequently, β-cyclodextrin microencapsulation may be considered as an effective and promising technique for tannin delivery with improved antioxidant and antihyperlipidemic activities.

Preparation and Characterisation of a Cyclodextrin-Complexed Mānuka Honey Microemulsion for Eyelid Application

Honey has been widely purported as a natural remedy due to its antimicrobial and anti-inflammatory effects. In recent years, several studies have suggested that the considerably high methylglyoxal (MGO) concentration in Mānuka honey (MH) makes it particularly effective to manage bacterial overload, such as that observed in blepharitis. However, the poor solubility, high viscosity, and osmolarity of aqueous honey solutions, especially at the high MGO concentrations studied in the literature, render the formulation of an acceptable dosage form for topical application to the eyelids challenging. Here, the antibacterial properties of raw MH and alpha-cyclodextrin (α-CD)-complexed MH were evaluated at relatively low MGO concentrations, and a liquid crystalline-forming microemulsion containing α-CD-complexed MH was formulated. After determining pH and osmolarity, ocular tolerability was assessed using human primary corneal epithelial cells and chorioallantoic membranes, while the antibacterial efficacy was further evaluated in vitro. The α-CD–MH complex had significantly greater antibacterial activity against Staphylococcus aureus than either constituent alone, which was evident even when formulated as a microemulsion. Moreover, the final formulation had a physiologically acceptable pH and osmolarity for eyelid application and was well-tolerated when diluted 1:10 with artificial tear fluid, as expected to be the case after accidental exposure to the ocular surface in the clinical setting. Thus, a safe and efficient MH dosage form was developed for topical application to the eyelids, which can potentially be used to support optimal eyelid health in the management of blepharitis.

In Vivo Investigation of (2-Hydroxypropyl)-β-cyclodextrin-Based Formulation of Spironolactone in Aqueous Solution for Paediatric Use

Spironolactone (SPL), a potent anti-aldosterone steroidal drug used to treat several diseases in paediatric patients (e.g., hypertension, primary aldosteronism, Bartter’s syndrome, and congestive heart failure), is not available in child-friendly dosage forms, and spironolactone liquids have been reported to be unpalatable. Aiming to enhance SPL solubility in aqueous solution and overcome palatability, herein, the effects of (2-hydroxypropyl)-β-cyclodextrin (HP-β-CyD) were thoroughly investigated on solubilisation in water and on masking the unpleasant taste of SPL in vivo. Although the complexation of SPL with HP-β-CyD was demonstrated through phase solubility studies, Job’s plot, NMR and computational docking studies, our in vivo tests did not show significant effects on taste aversion. Our findings, on the one hand, suggest that the formation of an inclusion complex of SPL with HP-β-CyD itself is not necessarily a good indicator for an acceptable degree of palatability, whereas, on the other hand, they constitute the basis for investigating other cyclodextrin-based formulations of the poorly water-soluble steroidal drug, including solid dosage forms, such as spray-dried powders and orodispersible tablets.

The Role of Cyclodextrins in the Design and Development of Triterpene-Based Therapeutic Agents

Triterpenic compounds stand as a widely investigated class of natural compounds due to their remarkable therapeutic potential. However, their use is currently being hampered by their low solubility and, subsequently, bioavailability. In order to overcome this drawback and increase the therapeutic use of triterpenes, cyclodextrins have been introduced as water solubility enhancers; cyclodextrins are starch derivatives that possess hydrophobic internal cavities that can incorporate lipophilic molecules and exterior surfaces that can be subjected to various derivatizations in order to improve their biological behavior. This review aims to summarize the most recent achievements in terms of triterpene:cyclodextrin inclusion complexes and bioconjugates, emphasizing their practical applications including the development of new isolation and bioproduction protocols, the elucidation of their underlying mechanism of action, the optimization of triterpenes’ therapeutic effects and the development of new topical formulations.

An overview on the application of supercritical carbon dioxide for the processing of pharmaceuticals

Supercritical carbon dioxide (scCO2) application in the pharmaceutical industry is still undeveloped regardless of significant research interests in this processing medium shown in the last decades. ScCO2 technologies can improve drug solubility, bioavailability, and therapeutic effect. These technologies can lead to the development of new formulations that will contribute to a decrease in drug dose, medication frequency, and increase patients' well-being. Considering the significant decrease in the price of high-pressure equipment and society's growing need for cleaner production and safer products, it is expected that symbiosis between supercritical fluid and pharmaceutical technologies will happen soon. Therefore, this review was focused on the latest contributions of scCO2 technologies to the pharmaceutical field. The main aim was to bring these technologies closer to pharmaceutical specialists. For this purpose, the most commonly used technologies were explained and discussed: the preparation of solid dispersions, polymer impregnation with drugs, and drug micro/nanoparticle production using scCO2.

Characterization of excipients to improve pharmaceutical properties of sirolimus in the supercritical anti-solvent fluidized process

Enhanced drug release and bioavailability of poorly soluble active pharmaceutical ingredient (API) can be achieved via a fluidized bed coating integrated with supercritical anti-solvent (SAS-FB) - a process of precipitating drug particles onto carrier granules. However, in the absence of excipients, SAS-FB often results in crystalline of the API on the surface of carriers, limiting the improvement of pharmaceutical properties. Co-processing with excipients is considered an effective approach to improve drug release in the SAS-FB process. Our study used sirolimus, an immune suppressive agent, as the model API to characterize excipients for their effect on pharmaceutical properties in the SAS-FB process. We show that co-precipitation of excipients and sirolumus impacts on carrier specific surface area and drug yield. Among the tested excipients, formulation containing polyvinylpyrrolidone K30 achieved the highest drug yield. Importantly, compared with Rapamune® tablet, our optimized formulation displayed a superior in vivo oral bioavailability by 3.05-fold in Sprague-Dawley rats and 3.99-fold in beagle dogs. A series of characterization of the processed API was performed to understand the mechanism by which excipients contributed to drug dissolution properties. Our study provides a useful guidance for the use of excipients in the SAS-FB technology to improve pharmaceutical properties of sirolimus and other poorly soluble drugs.

Effect of the Carrier on the Coprecipitation of Curcumin through Supercritical-Assisted Atomization

In this paper, composite systems containing curcumin (CUR) were prepared through supercritical-assisted atomization (SAA), using different carriers. Curcumin is particularly interesting in the pharmaceutical and nutraceutical fields for its antioxidant, antitumoral, and anti-inflammatory properties. However, its therapeutic effect on human health is restricted by its poor water solubility and low dissolution rate, limiting its absorption after its oral administration. To increase the dissolution rate and then the bioavailability of the active compound, CUR was coprecipitated with polymeric, i.e., polyvinylpyrrolidone (PVP) and dextran (DXT), and not polymeric, i.e., hydroxypropyl-β-cyclodextrin (HP-β-CD), carriers. The effects of some operating parameters, namely the concentration of solutes in solution and the active compound/carrier ratio, on the morphology and the particle size distribution of the powders were investigated. Submicrometric particles were produced with all the carriers. Under the best operating conditions, the mean diameters ± standard deviation were equal to 0.69 ± 0.20 μm, 0.40 ± 0.13 μm, and 0.81 ± 0.25 μm for PVP/CUR, DXT/CUR, and HP-β-CD/CUR, respectively. CUR dissolution rates from coprecipitated particles were significantly increased in the case of all the carriers. Therefore, the results are exciting from a pharmaceutical and nutraceutical point of view, to produce supplements containing curcumin, but assuring a high dissolution rate and bioavailability and, consequently, a more effective therapeutic effect.

Encapsulation of Phenolic Compounds from a Grape Cane Pilot-Plant Extract in Hydroxypropyl Beta-Cyclodextrin and Maltodextrin by Spray Drying

Grape canes, the main byproducts of the viticulture industry, contain high-value bioactive phenolic compounds, whose application is limited by their instability and poorly solubility in water. Encapsulation in cyclodextrins allows these drawbacks to be overcome. In this work, a grape cane pilot-plant extract (GC_PPE) was encapsulated in hydroxypropyl beta-cyclodextrin (HP-β-CD) by a spray-drying technique and the formation of an inclusion complex was confirmed by microscopy and infrared spectroscopy. The phenolic profile of the complex was analyzed by LC-ESI-LTQ-Orbitrap-MS and the encapsulation efficiency of the phenolic compounds was determined. A total of 42 compounds were identified, including stilbenes, flavonoids, and phenolic acids, and a complex of (epi)catechin with β-CD was detected, confirming the interaction between polyphenols and cyclodextrin. The encapsulation efficiency for the total extract was 80.5 ± 1.1%, with restrytisol showing the highest value (97.0 ± 0.6%) and (E)-resveratrol (32.7 ± 2.8%) the lowest value. The antioxidant capacity of the inclusion complex, determined by ORAC-FL, was 5300 ± 472 µmol TE/g DW, which was similar to the value obtained for the unencapsulated extract. This formulation might be used to improve the stability, solubility, and bioavailability of phenolic compounds of the GC_PPE for water-soluble food and pharmaceutical applications.

Formation of Rutin-β-Cyclodextrin Inclusion Complexes by Supercritical Antisolvent Precipitation

In this work, rutin (RUT)–β-cyclodextrin (β-CD) inclusion complexes are prepared by Supercritical AntiSolvent (SAS) precipitation. Well-defined composite microparticles are obtained at guest:host ratios equal to 1:2 and 1:1 mol:mol. The dimensions of composite particles range between 1.45 ± 0.88 µm and 7.94 ± 2.12 µm. The formation of RUT–β-CD inclusion complexes has been proved by different analyses, including Fourier transform infrared spectroscopy, Differential Scanning Calorimetry, X-ray diffraction, and UV-vis spectroscopy. The dissolution tests reveal a significant improvement in the release rate of RUT from inclusion complexes. Indeed, compared to the unprocessed RUT, the dissolution rate is about 3.9 and 2.4 times faster in the case of the complexes RUT–β-CD 1:2 and 1:1 mol:mol, respectively. From a pharmaceutical/nutraceutical point of view, CD-based inclusion complexes allow the reduction of the polymer amount in the SAS composite formulations.