Development of facile synthesized mesoporous carbon composite adsorbent for efficient CO2 capture

CO2 capture using silica-immobilized dicationic ionic liquids with magnetic and non-magnetic properties

The need to find alternative materials to replace aqueous amine solutions for the capture of CO2 in post-combustion technologies is pressing. This study assesses the CO2 sorption capacity and CO2/N2 selectivity of three dicationic ionic liquids with distinct anions immobilized in commercial mesoporous silica support (SBA- 15). The samples were characterized by UART-FTIR, NMR, Raman, FESEM, TEM, TGA, Magnetometry (VSM), BET and BJH. The highest CO2 sorption capacity and CO2/N2 selectivity were obtained for sample SBA@DIL_2FeCl4 [at 1 bar and 25 °C; 57.31 (±0.02) mg CO2/g; 12.27 (±0.72) mg CO2/g]. The results were compared to pristine SBA-15 and revealed a similar sorption capacity, indicating that the IL has no impact on the CO2 sorption capacity of silica. On the other hand, selectivity was improved by approximately 3.8 times, demonstrating the affinity of the ionic liquid for the CO2 molecule. The material underwent multiple sorption/desorption cycles and proved to be stable and a promising option for use in industrial CO2 capture processes.

Constructing A Solar Evaporator by Stacking Exhausted Wood Sponges for Freshwater Generation and Fertilizer Recovery

Solar water evaporation is an efficient and sustainable technology. To reduce energy consumption and improve cost efficiency, the surface modification of wood sponge by polypyrrole-glutathione (PGWS) was achieved using an in-situ synthetic method. The PGWS exhibits excellent adsorption efficiency for Hg(II) ions with adsorption capacity of 330.8 mg g-1 at 25 °C. Following Hg(II) absorption, the PGWS could be upcycled for solar steam generation. A stackable device was constructed by placing two wood sponges under a Hg(II) saturated PGWS [PGWS-Hg(II)], this system exhibited the highest water evaporation rate of 2.14 kg m-2  h-1 under 1 kW m-2 . Moreover, collecting paper was inserted between the stacked PGWS-Hg(II) and wood sponge for the collection of salts. As such salt can be successfully collected from simulated fertilizer plant effluent and then used as a nutrient for growing plants using a hydroponic system. The facile design of stackable evaporation provides an opportunity for wastewater utilization by harvesting solar energy.

Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review

Plastic waste generation has increased dramatically every day. Indiscriminate disposal of plastic wastes can lead to several negative impacts on the environment, such as a significant increase in greenhouse gas emissions and water pollution. Therefore, it is wise to think of other alternatives to reduce plastic wastes without affecting the environment, including converting them into valuable products using effective methods such as pyrolysis. Products from the pyrolysis process encompassing of liquid, gas, and solid residues (char) can be turned into beneficial products, as the liquid product can be used as a commercial fuel and char can function as an excellent adsorbent. The char produced from plastic wastes could be modified to enhance carbon dioxide (CO2) adsorption performance. Therefore, this review attempts to compile relevant knowledge on the potential of adsorbents derived from waste plastic to capture CO2. This review was performed in accordance with PRISMA guidelines. The plastic-waste-derived activated carbon, as an adsorbent, could provide a promising method to solve the two environmental issues (CO2 emission and solid management) simultaneously. In addition, the future perspective on char derived from waste plastics is highlighted.