Fabrication of porous octahedron-flowerlike microsphere NH2-UiO-66/CdIn2S4 heterojunction photocatalyst for enhanced photocatalytic CO2 reduction

Recent advances in perovskite-based Z-scheme and S-scheme heterojunctions for photocatalytic CO2 reduction

The dramatic rise in carbon dioxide levels in the atmosphere caused by the continuous use of carbon fuels continues to have a significant impact on environmental degradation and the disappearance of energy reserves. Past few years have seen a significant increase in the interest in photocatalytic carbon dioxide reduction because of its ability to lower CO2 releases from the burning of fossil fuels while also producing fuels and important chemical products. Because of their excellent catalytic efficiency, great uniformity, lengthy charge diffusion layers and texture flexibility that enable accurate band gap and band line optimization, perovskite-based nanomaterials are perhaps the most advantageous among the numerous semiconductors proficient in accelerating CO2 conversion under visible light. Firstly, a brief insight into photocatalytic CO2 conversion mechanism and structural features of perovskites are discussed. Further the classification and selection of perovskites for Z and S-scheme heterojunctions and their role in photocatalytic CO2 reduction analysed. The efficient modification and engineering of heterojunctions via co-catalyst loading, morphology control and vacancy introduction have been comprehensively reviewed. Third, the state-of-the-art achievements of perovskite-based Z-scheme and S-scheme heterojunctions are systematically summarized and discussed. Finally, the challenges, bottlenecks and future perspectives are discussed to provide a pathway for applying perovskite-based heterojunctions for solar-to-chemical energy conversion.

Heterojunction construction by a coordination bond between metal-organic frameworks and CdIn2S4 for improved photocatalytic performance

Photocatalytic water splitting using a semiconductor is one of the most effective ways to obtain clean energy. However, a pure semiconductor exhibits a poor photocatalytic performance because of its harsh charge carrier recombination, limited light harvesting ability and deficiency of surface reactive sites. Herein, the hydrothermal method is employed to synthesize a new UiO-66-NH₂/CdIn₂S₄ (NU66/CIS) heterojunction nanocomposite, constructed via a coordination bond between NU66 and CIS. Benefitting from the great specific surface area, the UiO-66-NH₂ provides abundant reactive sites on its surface to boost the water reduction. Moreover, the amino groups in the UiO-66-NH₂ are supplied as coordination sites to establish strong interactions between NU66 and CIS, thus forming the heterojunction with intimate connections. Therefore, the electrons produced by photoexcitation of CIS can be more effectively promoted to transfer to NU66, and then react with H⁺ in water to produce H₂. Accordingly, the optimized 8% NU66/CIS heterojunction exhibits a considerable photocatalytic efficiency for water splitting, in which the H₂ production rate is 7.8 times higher than that of bare CIS, and 3.5 times as high as that of the two materials combined by simple physical mixing. This research offers a creative and innovative idea for the construction of active MOF-based photocatalysts for H₂ evolution.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Build-in electric field in CuWO4/covalent organic frameworks S-scheme photocatalysts steer boosting charge transfer for photocatalytic CO2 reduction

Covalent organic frameworks (COFs) are crystalline porous materials with enormous potential for realizing solar-driven CO₂-to-fuel conversion, yet the sluggish transfer/separation of photoinduced electrons and holes remains a compelling challenge. Herein, a step (S)-scheme heterojunction photocatalyst (CuWO₄-COF) was rationally fabricated by a thermal annealing method for boosting CO₂ conversion to CO. The optimal CuWO₄/COF composite sample, integrating 10 wt% CuWO₄ with an olefin (C═C) linked COF (TTCOF), achieved a remarkable gas-solid phase CO yield as high as 7.17 ± 0.35 μmol g^-1h^-1 under visible light irradiation, which was significantly higher than the pure COF (1.6 ± 0.29 μmol g^-1h^-1). The enhanced CO₂ conversion rate could be attributable to the interface engineering effect and the formation of internal electric field (IEF) directing from TTCOF to CuWO₄ according to the theoretical calculation and experimental results, which also proves the electrons transfer from TTCOF to CuWO₄ upon hybridization. In addition, driven by the IEF, the photoinduced electrons can be steered from CuWO₄ to TTCOF under visible light irradiation as well-elucidated by in-situ irradiated X-ray photoelectron spectroscopy, verifying the S-scheme charge transfer pathway over CuWO₄/COF composite heterojunctions, which greatly foster the photoreduction activity of CO₂. The preparation technique of the S-scheme heterojunction photocatalyst in this study provides a paradigmatic protocol for photocatalytic solar fuel generation.

Recent Progress of Three-dimensionally Ordered Macroporous (3DOM) Materials in Photocatalytic Applications: A Review

In recent years, three-dimensionally ordered macroporous (3DOM) materials have attracted tremendous interest in the field of photocatalysis due to the periodic spatial structure and unique physicochemical properties of 3DOM catalysts. In this review, the fundamentals and principles of 3DOM photocatalysts are briefly introduced, including the overview of 3DOM materials, the photocatalytic principles based on 3DOM materials, and the advantages of 3DOM materials in photocatalysis. The preparation methods of 3DOM materials are also presented. The structure and properties of 3DOM materials and their effects on photocatalytic performance are briefly summarized. More importantly, 3DOM materials, as a supported catalyst, are extensively employed to combine with various common materials, including metal nanoparticles, metal oxides, metal sulfides, and carbon materials, to enhance photocatalytic performance. Finally, the prospects and challenges for the development of 3DOM materials in the field of photocatalysis are presented.

Recent Advances and Perspectives of Core-Shell Nanostructured Materials for Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into solar fuels is a promising technology to alleviate CO₂ emissions and energy crises. The development of core-shell structured photocatalysts brings many benefits to the photocatalytic CO₂ reduction process, such as high conversion efficiency, sufficient product selectivity, and endurable catalyst stability. Core-shell nanostructured materials with excellent physicochemical features take an irreplaceable position in the field of photocatalytic CO₂ reduction. In this review, the recent development of core-shell materials applied for photocatalytic reduction of CO_{2 is introduced} . First, the basic principle of photocatalytic CO₂ reduction is introduced. In detail, the classification and synthesis techniques of core-shell catalysts are discussed. Furthermore, it is also emphasized that the excellent properties of the core-shell structure can greatly improve the activity, selectivity, and stability in the process of photocatalytic CO₂ reduction. Hopefully, this paper can provide a favorable reference for the preparation of efficient photocatalysts for CO₂ reduction.

Hierarchical S-Scheme Heterostructure of CdIn2S4@UiO-66-NH2 toward Synchronously Boosting Photocatalytic Removal of Cr(VI) and Tetracycline

Developing highly efficient photocatalysts toward synchronously removing heavy metals and organic pollutants is still a serious challenge. Herein, we depict hierarchical S-scheme heterostructured photocatalysts prepared via in situ anchoring UiO-66-NH₂ nanoparticles onto the CdIn₂S₄ porous microsphere structures assembled with numerous nanosheets. In the mixed system of Cr(VI) and tetracycline (TC), the optimal photocatalyst (CIS@U66N-30) shows remarkable photocatalytic activities toward the synchronous removal of Cr(VI) (97.26%) and TC (close to 100% of) under visible-light irradiation for 60 min, being the best removal rates among those of the reported photocatalysts, and sustains the outstanding stability and reusability. Its reaction rate constants of Cr(VI) reduction and TC degradation are about 2.06 and 1.58 folds that in the single Cr(VI) and TC systems, respectively. The enhanced photocatalytic activities of CIS@U66N-30 mainly result from the following synergism: (1) its hierarchical structure offers abundant active sites, and the S-scheme migration mechanism of charge carriers in the heterostructure accelerates the separation and migration of the useful photoinduced electrons and holes with the high redox capability; (2) Cr(VI) and TC can serve as the electron scavenger for TC oxidation degradation and the hole and ^•OH scavenger for Cr(VI) reduction, respectively, further enhancing the separation and utilization efficiency of photoinduced electrons and holes. Besides, the possible TC degradation pathway and plausible S-scheme photocatalytic mechanism over CIS@U66N-30 for the concurrent elimination of Cr(VI) and TC are proposed.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

A review on TiO2-x-based materials for photocatalytic CO2 reduction

Photocatalytic CO₂ reduction technology has a broad potential for dealing with the issues of energy shortage and global warming. As a widely studied material used in the photocatalytic process, titanium dioxide (TiO₂) has been continuously modified and tailored for more desirable application. Recently, the defective/reduced titanium dioxide (TiO_2-x) catalyst has attracted broad attention due to its excellent photocatalytic performance for CO₂ reduction. In this perspective review, we comprehensively present the recent progress in TiO_2-x-based materials for photocatalytic CO₂ reduction. In detail, the review starts with the fundamentals of CO₂ photocatalytic reduction. Then, the synthesis of a defective TiO₂ structure is introduced for the regulation of its photocatalytic performance, especially its optical properties and dissociative adsorption properties. In addition, the current application of TiO_2-x-based photocatalysts for CO₂ reduction is also highlighted, such as metal-TiO_2-x, oxide-TiO_2-x and TiO_2-x-carbon-based photocatalysts. Finally, the existing challenges and possible scope of photocatalytic CO₂ reduction over TiO_2-x-based materials are discussed. We hope that this review can provide an effective reference for the development of more efficient and reasonable photocatalysts based on TiO_2-x.

Carbon quantum dots-modified Z-scheme Bi12O17Cl2/NiAl-LDH for significantly boosting photocatalytic CO2 reduction

Photocatalytic reduction of CO₂ to high-energy products is an effective way to utilize solar energy and mitigate the greenhouse effect. In this paper, a series of CQDs/Bi₁₂O₁₇Cl₂/NiAl-LDH (C/BOC/LDH) photocatalysts were prepared via a one-pot hydrothermal method, demonstrated excellent photocatalytic CO₂ reduction performance. In the case of only water without any photosensitizer and sacrificial agent, the CO production rate on C/0.3BOC/LDH reached 16.4 μmol·g^-1h^-1, which is 6.7 times higher than that of the original LDH. The construction of Z-scheme heterojunctions inhibited the recombination of electrons with holes. The unique up-conversion PL behavior of CQDs benefitted the absorption of energy in the NIR by the photocatalyst. This study provides meaningful assistance for the design and construction of a ternary photocatalytic system with Z-scheme heterojunction and carbon-based co-catalyst.

Rational Design of Novel COF/MOF S-Scheme Heterojunction Photocatalyst for Boosting CO2 Reduction at Gas-Solid Interface

Solar-driven photoreduction of CO₂ into valuable fuels offers a sustainable technology to relieve the energy crisis as well as the greenhouse effect. Yet the exploration of highly efficient, selective, stable, and environmental benign photocatalysts for CO₂ reduction remains a major issue and challenge. The interfacial engineering of heterojunction photocatalysts could be a valid approach to boost the efficiency of the catalytic process. Herein, we propose a novel covalent organic framework/metal organic framework (COF/MOF) heterojunction photocatalyst, using olefin (C═C) linked covalent organic framework (TTCOF) and NH₂-UiO-66 (Zr) (NUZ) as representative building blocks, for enhanced CO₂ reduction to CO. The optimized TTCOF/NUZ exhibited a superior CO yield (6.56 μmol g^-1 h^-1) in gas-solid system when irradiated by visible light and only with H₂O (g) as weak reductant, and it was 4.4 and 5 times higher than pristine TTCOF and NUZ, respectively. The photogenerated electrons transfer route was proposed to follow the typical step-scheme (S-scheme), which was affirmed by XPS, in situ XPS and EPR characterizations. The boosting CO₂ photoreduction activity could be credited to the special charge carrier separation in S-scheme heterojunction, which can accelerate photogenerated electrons transportation and improve the redox ability at the interface. This work paves the way for the design and preparation of novel COF/MOF S-scheme heterostructure photocatalysts for CO₂ reduction.

Research progress on photocatalytic reduction of CO2 based on LDH materials

Converting CO₂ to renewable fuels or valuable carbon compounds is an effective way to solve the global warming and energy crisis. Compared with other CO₂ conversion methods, photocatalytic reduction of CO₂ is more energy-saving, environmentally friendly, and has a broader application prospect. Layered double hydroxide (LDH) has attracted widespread attention as a two-dimensional material, composed of metal hydroxide layers, interlayer anions and water molecules. This review briefly introduces the basic theory of photocatalysis and the mechanism of CO₂ reduction. The composition and properties of LDH are introduced. The research progress on LDH in the field of photocatalytic reduction of CO₂ is elaborated from six aspects: directly as a catalyst, as a precursor for a catalyst, and by modification, intercalation, supporting with other materials and construction of a heterojunction. Finally, the development prospects of LDH are put forward. This review could provide an effective reference for the development of more efficient and reasonable photocatalysts based on LDH.

Constructing Schottky junctions via Pd nanosheets on DUT-67 surfaces to accelerate charge transfer

The separation, transfer and recombination of charge often affect the rate of photocatalytic reduction of CO₂. Schottky junctions can promote the rapid separation of space charge. Therefore, in this paper, Pd nanosheets were grown on the surface of DUT-67 by a hydrothermal method, and a Schottky junction was constructed between DUT-67 and Pd. Under the action of the Schottky junction, the CO yield of 0.3-Pd/DUT-67 reached 12.15 μmol/g/h, which was 17 times higher than that of DUT-67. Efficient charge transfer was demonstrated in photochemical experiments. The large specific surface area and the increased light utilization rate also contributed to the increase in the CO₂ reduction efficiency. In addition, the mechanism of Pd/DUT-67 photocatalytic reduction of CO₂ was proposed.

Tailored Linker Defects in UiO-67 with High Ligand-to-Metal Charge Transfer toward Efficient Photoreduction of CO2

Defect engineering can be used as a potential tool to activate metal-organic frameworks by regulating the pore structure, electronic properties, and catalytic activity. Herein, linker defects were effectively controlled by adjusting the amount of formic acid, and UiO-67 with different CO₂ reduction capabilities was obtained. Among them, UiO-67-200 had the highest ability to selectively reduce CO₂ to CO (12.29 μmol g^-1 h^-1). On the one hand, the results based on time-resolved photoluminescence decay curves and photochemical experiments revealed that UiO-67-200 had the highest charge separation efficiency. On the other hand, the linker defects affected the band structure of UiO-67 by changing the lowest unoccupied molecular orbital (LUMO) based on the density functional theory and UV-vis spectra. Hence, the proper linker defects enhanced the ligand-to-metal charge transfer process by promoting the transfer of electrons between the highest occupied molecular orbital and LUMO. Additionally, in situ Fourier transform infrared spectra and ¹³CO₂ labeling experiments also indicated that COOH* was an important intermediate for CO formation and that CO originated from the photoreduction of CO₂.