Incidence, management, and visual outcomes of buttonholed laser in situ keratomileusis flaps

Complications of laser-assisted in situ keratomileusis

Laser-assisted in situ keratomileusis (LASIK) is one of the most commonly performed kerato-refractive surgery globally. Since its introduction in 1990, there has been a constant evolution in its technology to improve the visual outcome. The safety, efficacy, and predictability of LASIK are well known, but complications with this procedure, although rare, are not unknown. Literature review suggests that intraoperative complications include suction loss, free cap, flap tear, buttonhole flap, decentered ablation, central island, interface debris, femtosecond laser-related complications, and others. The postoperative complications include flap striae, flap dislocation, residual refractive error, diffuse lamellar keratitis, microbial keratitis, epithelial ingrowth, refractive regression, corneal ectasia, and others. This review aims to provide a comprehensive knowledge of risk factors, clinical features, and management protocol of all the reported complications of LASIK. This knowledge will help in prevention as well as early identification and timely intervention with the appropriate strategy for achieving optimal visual outcome even in the face of complications.

Hydrogel sealant to prevent recurrent epithelial ingrowth in the setting of a LASIK flap buttonhole

Purpose

To report the first case of hydrogel sealant to prevent the recurrence of epithelial ingrowth in a LASIK flap buttonhole.

Observations

A 67-year-old female presented ten years after undergoing bilateral LASIK with diffuse lamellar keratitis and flap dislodgement after blunt trauma to the right eye. She was found to have epithelial ingrowth with diffuse debris and striae, so her flap was lifted and the epithelial ingrowth was removed. However, a central buttonhole was noted intraoperatively. Once all the epithelium was removed, the flap was repositioned and hydrogel sealant (ReSure, Ocular Therapeutix, Bedford, MA) was used to fill the buttonhole as well as seal down the edges of the flap. Sixteen months postoperatively, the patient's uncorrected visual acuity was 20/50-2 and there was no recurrence of the epithelial ingrowth at the edges of the buttonhole.

Conclusions and importance

Preventing the recurrence of epithelial ingrowth is a challenging situation, especially in the setting of a LASIK flap buttonhole. The use of hydrogel sealant in the buttonhole and around the edges of the flap may offer an elegant and effective solution.

[Scanning electron microscopic investigations of cutting edge quality in lamellar keratotomy using the Wavelight femtosecond laser (FS-200) : What influence do spot distance and an additional tunnel have?]

BACKGROUND

Femtosecond lasers (fs-lasers) are established cutting instruments for the creation of LASIK flaps. Previous studies often showed even rougher surfaces after application of fs-laser systems compared to lamellar keratotomy with mechanical microkeratomes. When cutting the cornea with fs-lasers, an intrastromal gas development occurs, which has a potentially negative influence on the cutting quality if the gas cannot be dissipated; therefore, manufacturers have chosen the way of gas assimilation in so-called pockets. The investigated system creates a tunnel which opens under the conjunctiva. The aim of this study was to investigate the effects of a tunnel as well as the influence of different spot distances on the quality of cut surfaces and edges.

MATERIAL AND METHODS

In this experimental study on freshly enucleated porcine eyes (n = 15), the following cuts were carried out with the FS-200 (Wavelight, Erlangen, Germany): 1. standard setting (spot and line separation 8 µm), 2. with tunnel for gas drainage, 3. without gas-conducting tunnel, 4. with increased spot spacing (spot and line separation 9 μm instead of 8 μm) and 5. with reduced spot spacing (spot and line separation 7 μm instead of 8 μm). Subsequently, scanning electron microscopy (FEI Quanta 650, Hillsboro, OR) of the cut edges and surfaces as well as the gas drain tunnel were performed. The evaluation was based on an established score.

RESULTS

The current fs-laser system (200 Hz) is able to create smooth cutting surfaces and sharp edges. The changed density of laser pulses compared to the standard settings with a reduced or increased distance between the pulses, did not achieve any further improvement in the surface quality. The gas-conducting tunnel could be detected by scanning electron microscope. In the case of cutting without a tunnel, roughened surfaces and irregularities on the cutting edges were found.

CONCLUSION

When the FS-200 fs-laser is used, LASIK cuts with very smooth cut surfaces and sharp cutting edges are achieved. This is only valid as long as an additional tunnel with the fs-laser is placed under the conjunctiva. It can be assumed that the resulting gas is effectively drained through this tunnel. The installation of the tunnel represents a new possibility to replace previous techniques of gas assimilation in deeper lying cutting areas.

Fibrin glue for prevention of recurrent epithelial ingrowth under a LASIK flap with a central buttonhole defect

A 61-year-old woman presented with a paracentral buttonhole flap defect associated with a linear tear, extensive epithelial ingrowth, and macrostriae in the right eye. A laser in situ keratomileusis enhancement had been performed 3 weeks earlier. The epithelial ingrowth was removed after careful lifting of the flap, and tissue adhesive was used postoperatively as a barrier to further ingrowth. Six months postoperatively, the patient's corrected distance visual acuity had improved to 20/20 and the slitlamp examination showed no evidence of recurrent epithelial ingrowth. This case presents a novel approach to the management of a buttonhole defect.

Analysis of corneal endothelial cell density and morphology after laser in situ keratomileusis using two types of femtosecond lasers

Purpose

To compare two different femtosecond lasers used for flap creation during laser-assisted in situ keratomileusis (LASIK) surgery in terms of their effects on the corneal endothelium.

Methods

We performed LASIK surgery on 254 eyes of 131 patients using IntraLase FS60 (Abbott Medical Optics, Inc, Irvine, CA; IntraLase group) and 254 eyes of 136 patients using Femto LDV (Ziemer Group AG, Port, Switzerland; LDV group) for corneal flap creation. The mean cell density, coefficient of variation, and hexagonality of the corneal endothelial cells were determined and the results were statistically compared.

Results

There were no statistically significant differences in the corneal morphology between pre and post LASIK results in each group, nor were there significant differences between the results of both groups at 3 months post LASIK.

Conclusions

Both IntraLase FS60 and Ziemer Femto LDV are able to create flaps without significant adverse effects on the corneal endothelial morphology through 3 months after LASIK surgery.

Comparison of the predictability, uniformity and stability of a laser in situ keratomileusis corneal flap created with a VisuMax femtosecond laser or a Moria microkeratome

This prospective study compared the predictability, uniformity and stability of laser in situ keratomileusis corneal flap thickness created by a femtosecond laser or a classic microkeratome. Twenty-five femtosecond laser (VisuMax, Carl Zeiss Meditec) flaps and 38 microkeratome (Moria M3) flaps were measured using anterior segment optical coherence tomography at 1 week, 1 month and 6 months postoperatively. Flap thickness at seven points on each of the four meridians was calculated. At 6 months, VisuMax flaps showed better prediction than Moria flaps for central flap thickness. The standard deviation within individual flaps was smaller for VisuMax flaps and their index of symmetry was better. The mean thicknesses among the four eccentricities in the VisuMax flaps were the same, while Moria flaps were thicker at the 3-mm radius compared with the centre. The VisuMax femtosecond laser created corneal flaps with better predictability and uniformity, and similar reproducibility and stability, compared with the microkeratome.

Intraoperative flap complications in laser in situ keratomileusis with two types of microkeratomes

PURPOSE

To determine the incidence and types of intraoperative flap complications in laser in situ keratomileusis (LASIK) encountered with the Hansatome microkeratome and the Moria microkeratome.

METHODS

In this retrospective case series, all patients with intraoperative flap complications who were treated between June 1999 and July 2008 at the Eye Consultants Center in Riyadh, Saudi Arabia, were identified and reviewed.

RESULTS

Of the 4352 subjects who underwent bilateral primary LASIK procedure, intraoperative microkeratome complications were detected in 89 eyes of 83 patients. The overall incidence of flap complications was 89/8704 (1.00%): incomplete flaps occurred in 53 eyes (0.60%), followed by buttonhole flaps in 17 eyes (0.19%), free complete flaps in 10 eyes (0.11%), free partial flaps in 6 eyes (0.07%), sluffed epithelium in 2 eyes (0.023%), and a splitted flap (vertical flap cut) in 1 eye (0.01%). The incidence rates of intraoperative flap complications with the Hansatome microkeratome and the Moria microkeratome were 1.21% (41/3378) and 0.90% (48/5326), respectively (P = 0.19). There was a statistically significant difference between the two microkeratomes with regard to the incidence of buttonhole flaps: 0.33% (11/3378) for the Hansatome microkeratome versus 0.11% (6/5326) for the Moria microkeratome (P = 0.04).

CONCLUSION

Generally, the incidence rates of intraoperative flap complications with the Hansatome microkeratome and the Moria microkeratome were similar. However, buttonhole flaps occurred more often with the Hansatome microkeratome (a type of microkeratome that produces larger flaps). The commonest complication encountered was the incomplete flap, followed by the buttonhole flap and free flap.