Repeatability of intraoperative central corneal and residual stromal thickness measurement using a handheld ultrasound pachymeter

Anterior-Segment Optical Coherence Tomography and Scanning Electron Microscopy to Evaluate Corneal Epithelial Changes in Patients Undergoing Glaucoma Therapy

PURPOSE

To measure corneal epithelial thickness (CET) in patients with glaucoma using anterior-segment optical coherence tomography and to evaluate CET changes in relation to corneal epithelial microvilli analyzed by scanning electron microscopy (SEM).

METHODS

Twenty-two eyes (16 patients) being treated with preservative-containing topical medications and 12 normal eyes underwent anterior-segment optical coherence tomography imaging using RTVue-100. The CET maps generated corresponded to a 6-mm diameter area of cornea that was divided into 17 sectors. We compared the CETs of each sector obtained in the glaucomatous group with those obtained in the control group.

RESULTS

Glaucomatous eyes were divided into 2 groups based on the number of microvilli on SEM: group 1 (6 eyes) = grades 1 and 2 at SEM (range: 500-3000) and group 2 (10 eyes) = grades 3 and 4 at SEM (range: 0-500). Four CET sectors were significantly thinner in group 1 than in normal eyes: central (P = 0.012), superior (P = 0.005), temporal paracentral (P = 0.003), and temporal midperipheral (P = 0.023). No significant differences were observed between group 2 and normal eyes. CET sectors were significantly thinner in group 1 than in group 2 only in the superior (P = 0.024) and superior-temporal paracentral (P = 0.020) sectors. CET progressively increased in patients with glaucoma as the number of corneal epithelial microvilli decreased.

CONCLUSIONS

CET and corneal epithelial microvilli are new parameters with which to evaluate early stages of corneal epithelial changes during glaucoma therapy. In advanced stages of corneal epithelial damage, SEM evaluation reveals ultrastructural epithelial changes that may not be observed on CET measurements.

One-Year Outcomes of Femtosecond Laser-Assisted LASIK Following Previous Radial Keratotomy

PURPOSE

To report the 1-year outcomes of LASIK in patients with previous radial keratotomy using a novel femtosecond laser platform.

METHODS

The charts of 27 eyes of 18 patients who underwent femtosecond laser-assisted LASIK with the WaveLight FS200 laser (Alcon Laboratories, Inc., Fort Worth, TX) for consecutive hyperopia following previous radial keratotomy were retrospectively reviewed at a single private practice location. The preoperative characteristics, intraoperative details, and postoperative results were evaluated.

RESULTS

All 27 eyes had successful femtosecond laser flap creation without significant intraoperative or postoperative complications. Uncorrected visual acuity significantly improved postoperatively to 0.13 ± 0.13 logMAR at 12 months of follow-up (P < .0001). Postoperative spherical equivalent averaged 0.11 ± 0.53 diopters. None of the patients lost any lines of corrected distance visual acuity during the postoperative period.

CONCLUSIONS

The femtosecond laser technique described by this study resulted in a safe and effective way to deliver LASIK following previous radial keratotomy. Future investigations are needed to further validate the outcomes of this study.

Accuracy of optical coherence tomography (OCT) in pachymetry for glaucoma patients

Background

Central corneal thickness (CCT) measurement has become an important test in the diagnosis and management of glaucoma. Currently, ultrasound corneal thickness measurement (pachymetry) is the most frequently used clinical technique and the gold standard to assess CCT. Newer instruments are currently available including the optical coherence tomography (OCT) instrument. The aim of the present study was therefore to evaluate the accuracy of the CCT measurements performed by three different observers, both with the OCT and ultrasound pachymetry (USP), in patients suffering from glaucoma.

Methods

Patients who had been previously diagnosed with glaucoma participated in this cross-sectional study. Glaucoma was defined as patients who had at least two repeatable Humphrey visual fields showing glaucoma damage using the software 24–2, and with the optic nerve showing typical glaucoma damage. The patients CCTs were measured with OCT and USP by three different examiners.

Results

Seventy eyes of 35 patients were included. The average age was 74 ± standard deviation (SD) 10.88, the average pachymetry value with OCT was 536 ± 29 μm, and the average pachymetry with USP was 532 ± 32 μm. The differences between OCT and USP were not significant (t-test, p = 0.32). The intraclass correlation coefficients were, for OCT, 0.99 [confidence interval (CI): 0.98–0.996], and for USP, 0.97 (CI: 0.95–0.98).

Conclusions

Agreement among the three observers using OCT or USP for pachymetry measurements was good. OCT might be used as an alternative method for pachymetry in glaucoma patients.

Comparison of pachymetry measurements between the Alcon Wavelight EX500 and Sonogage Corneo-Gage plus platforms

PURPOSE

To compare the agreement of intraoperative central corneal thickness (CCT) measurements of the Wavelight EX500 (Alcon Laboratories, Fort Worth, TX) that uses optical low coherence reflectometry to the Corneo-Gage Plus ultrasound pachymetry device (Sonogage, Cleveland, OH).

METHODS

In this retrospective study, 50 eyes of 26 patients undergoing LASIK were evaluated. Following LASIK flap creation, each eye was measured by both optical low coherence reflectometry and ultrasound pachymetry immediately prior to flap lifting and then again after flap lifting.

RESULTS

The mean CCT value before lifting the flap was 556.9 and 557.78 µm as measured by ultrasound pachymetry and optical low coherence reflectometry, respectively. After lifting the flap, the mean ultrasound pachymetry value was 440.96 µm and the mean optical low coherence reflectometry value was 441.7 µm. A two-sample Kolmogorov-Smirnov test demonstrated that the ultrasound pachymetry and the optical low coherence reflectometry distribution of measurements were the same. A Shapiro-Wilk test of normality could not be rejected. Bland-Altman plots showed strong agreement. The correlation between the two tests was 0.98 before flap lifting and 0.97 after flap lifting, both with a 95% confidence interval.

CONCLUSIONS

The pachymetry measurements by the optical low coherence reflectometry correlated with those of the ultrasound pachymetry device. The Wavelight EX500 optical low coherence reflectometry may be used in place of the ultrasound pachymetry device for measuring CCT.

Corneal deformation measurement using Scheimpflug noncontact tonometry

PURPOSE

To determine the intraexaminer repeatability and intersession reproducibility of corneal deformation measurement using Scheimpflug noncontact tonometry (Corvis ST) on normal subjects.

METHODS

Thirty-seven adults aged 20 to 48 years were invited to have their corneal deformation and curvature measurements taken using Corvis ST and Pentacam, respectively. Three consecutive measurements were taken for each instrument between 9:00 and 11:00 AM for intraexaminer repeatability analysis. Participants returned between 3:00 and 5:00 PM the same day for intersession reproducibility analysis.

RESULTS

The most repeatable corneal parameter measured by Corvis ST was central corneal thickness ([CCT] ICC, 0.96; precision, 10.85 μm; repeatability, 15.34 μm; CV, 1.01%), followed by deformation amplitude ([DA] ICC, 0.80; precision, 0.08 mm; repeatability, 0.13 mm; CV, 4.33%), first applanation time ([1st A-time] ICC, 0.77; precision, 0.22 milliseconds; repeatability, 0.31 milliseconds; CV, 1.42), and intraocular pressure ([IOP] ICC, 0.75; precision, 1.39 mm Hg; repeatability, 1.97 mm Hg; CV, 4.98). Other parameters showed poor repeatability. The DA and 1st A-time showed good intersession reproducibility. The 95% limits of agreement were +0.13 to -0.13 mm for DA and +0.27 to -0.33 milliseconds for 1st A-time. The DA was negatively correlated with central corneal thickness (r = -0.53, p < 0.001) but not with corneal curvatures (flattest curvature, r = 0.13, p = 0.46; steepest curvature, r = 0.05, p = 0.75).

CONCLUSIONS

Corneal deformation parameters DA and 1st A-time were repeatable and reproducible. A thinner cornea was associated with a higher corneal deformation. Measurement of DA serves as an indicator of corneal biomechanical properties.

Repeatability and interobserver reproducibility of Artemis-2 high-frequency ultrasound in determination of human corneal thickness

Background

The purpose of this study was to assess the repeatability and limits of agreement of corneal thickness values measured by a high-frequency ultrasound (Artemis-2), hand-held ultrasound pachymeter (DGH-500) and a specular microscope (SP-3000P).

Methods

Central corneal thickness (CCT) was analyzed in this prospective randomized study that included 32 patients (18 men and 14 women) aged 21–24 years. Measurements were obtained in two sessions, one week apart, by two examiners with three devices in a randomized order. Nine measurements were taken (three with each device) on one randomly selected eye of each patient in each measurement session. The coefficient of repeatability and interobserver reproducibility for the values of each method were calculated. The limits of agreement between techniques were also evaluated.

Results

There were no significant differences in CCT values between sessions for each of the three devices (P > 0.05). The repeatability coefficients for the Artemis-2 (±8 μm/±9 μm) were superior to those of the SP-3000P (±9 μm/±11 μm) and DGH 500 (±12 μm/±12 μm) in session 1/session 2 respectively, while the interobserver reproducibility index (differences between session 1 and session 2) was superior for the SP-3000P (±17 μm) with respect to DHG-500 (±29 μm) and the Artemis-2 (±31 μm). In session 1 and session 2, the limits of agreement between the techniques were 35 μm to −31 μm and 34 to −20 μm, respectively, for DGH-500 versus Artemis-2, 73 μm to 3 μm and 60 μm to 9 μm for Artemis-2 versus SP-3000P, and 58 μm to 22 μm and 72 μm to 10 μm for DGH-500 versus SP-3000P comparisons. The DGH-500 and Artemis-2 gave similar values (P > 0.05) in both sessions, but both (Artemis-2 and DGH-500) values were significantly greater than that of the SP-3000P (P < 0.05) in both sessions.

Conclusion

Repeatability was comparably good for the three techniques. However, interobserver reproducibility was approximately twice as good with the SP-3000P compared with the other two devices. The Artemis-2 CCT values consistently agreed with the DGH-500 and less so with the SP-3000P. The Artemis-2 provided CCT values that were, on average, 38 μm and 34 μm greater than that of the SP-3000P in session 1 and session 2, respectively.