Effects of the degree of milling on starch leaching characteristics and its relation to rice stickiness

Impact of rice variety, cooking equipment and pretreatment method on the quality of lightly milled rice

Lightly milled rice is a healthier choice compared to refined white rice. In this study, the effects of variety, cooking equipment and pretreatment method on the quality of six varieties of lightly milled rice from China after cooking was investigated through physics, chemistry and instrumental analysis method. Nanjing-No.5055 has the best eating quality, Xiadao-No.1 has higher appearance score, and Fengliangyouxiang-No.1 has the lowest glycemic index. Compared with microwave oven and electric cooker, steamer has a more significant positive impact on component retention, eating quality and sensory quality, but the former has lower cooking time and higher glycemic index. Soaking can effectively improve the water absorption rate, thus reducing hardness. Cleaning affects component retention but is beneficial for sensory quality. The most obvious variation in organizational structure can be observed in the steamer and soaking processes. These findings could serve as a valuable reference for the processing of lightly milled rice.

Experimental Warming Increased Cooked Rice Stickiness and Rice Thermal Stability in Three Major Chinese Rice Cropping Systems

Climate warming is a critical environmental issue affecting rice production. However, its effects on cooked rice texture and rice thermal properties remain unstudied in China. To address this gap, we conducted a two-year multi-site field warming experiment using free-air temperature increase facilities across three major Chinese rice cropping systems. Interestingly, warming had a minimal impact on the hardness of cooked rice, while it significantly increased stickiness by an average of 16.3% under warming conditions. Moreover, compared to control treatments, rice flour exhibited a significant increase in gelatinization enthalpy, onset, peak, and conclusion temperatures under warming conditions, with average increments of 8.7%, 1.00 °C, 1.05 °C, and 1.17 °C, respectively. In addition, warming significantly declined the amylose content, remarkedly elevated the protein content and relative crystallinity, and altered the weight distribution of the debranched starch. Correlation analysis revealed significant relationships between cooked rice stickiness, rice flour thermal properties, amylose content, protein content, and partial starch structures. Therefore, warming-induced alterations in rice composition and starch structure collectively enhanced cooked rice stickiness and rice thermal stability.

Relation between textural attributes and surface leachate structural and compositional characteristics of cooked rice

The objective of this study was to evaluate the leachate and textural characteristics of cooked rice, and the correlations between the leachate properties and texture attributes were also investigated. Cooked waxy rice had much higher total solids and amylopectin amount in leachate than the normal and high-amylose rice. For all varieties, the amylopectin chain length of the leachate was similar, excluding Dodam cultivar. The rheological characteristics of the leachate solutions were highly dependent on the amylopectin amount of the leachate. Regarding the textural characteristics, Dodam had the highest hardness and the lowest adhesiveness. The principal component analysis showed substantial differences in leachate and textural characteristics of Korean cooked rice according to its amylose content. The adhesiveness was positively and negatively correlated with amylopectin amount of leachate and the proportion of long amylopectin chains, respectively. These results indicated that the leachate characteristics of cooked rice significantly influenced its textural attributes.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01446-3.

Effect of milling and defatting treatment on texture and digestion properties of oat rice

Oat rice with great sensory acceptance was developed based on the combination method of milling and defatting (petroleum ether) treatment. In this study, the effect of milling and defatting treatment on the texture and digestion properties of oat rice was investigated. Results showed that milling and defatting treatment enhanced stickiness, enthalpy, and starch digestibility. The pasting temperature and hardness of oat rice were reduced. The lipid content of oat rice was significantly reduced by milling and defatting treatment, leading to a decrease in the formation of starch-lipid complex. Fourier transform infrared spectroscopy and X-ray diffraction analyses revealed that the application of milling and defatting treatments led to a reduction in the content of starch-lipid complexes in oats during the cooking process. Milling and defatting significantly enhanced both the rapid and slow digestion rates of oat rice. Specifically, the rapid digestion rate was found to be 2.5 times higher than the slow digestion rate. The nutritive components of oat rice were properly preserved, and the viscosity and elasticity of oat rice reached the maximum when milling for 40 s and defatting. This study provides a theoretical basis for oat products.

Effects of milling on texture and in vitro starch digestibility of oat rice

Compared with other oat products, consumers in China prefer oat rice and porridge made from naked oat. However, this oat product usually has poor sensory acceptance, which is directly related to the texture properties. This study aimed to use the milling method to improve the oat rice texture. The nutrient component, microstructure, pasting, and thermal properties of oat treated with different degrees of milling (0 s, 20 s, 40 s, 60 s, and 80 s) were researched. The results showed that milling would damage the bran layer of oat rice, increasing starch, β-glucan, total leached solids content, and the gelatinization enthalpy (ΔH). Meanwhile, oil, protein content, the pasting viscosity, and the pasting temperature were decreased. Milling made oat rice sticky and soft, and the bound water and non-flowing water migrated like flowing water. The cross-section of oat rice showed that milling damaged the surface of oat rice, which was beneficial to water entry and starch dissolution, and increased the viscosity of oat rice. When the milling time was 40 s and 60 s, the appearance, aroma, taste, texture, and overall acceptability of oat porridge were better. Moreover, rapid digestion fraction (k1) and slow digestion fraction (k2) are the lowest and have the effect of low blood glucose rise rate.

Review of technology advances to assess rice quality traits and consumer perception

The increase in rice consumption and demand for high-quality rice is impacted by the growth of socioeconomic status in developing countries and consumer awareness of the health benefits of rice consumption. The latter aspects drive the need for rapid, low-cost, and reliable quality assessment methods to produce high-quality rice according to consumer preference. This is important to ensure the sustainability of the rice value chain and, therefore, accelerate the rice industry toward digital agriculture. This review article focuses on the measurements of the physicochemical and sensory quality of rice, including new and emerging technology advances, particularly in the development of low-cost, non-destructive, and rapid digital sensing techniques to assess rice quality traits and consumer perceptions. In addition, the prospects for potential applications of emerging technologies (i.e., sensors, computer vision, machine learning, and artificial intelligence) to assess rice quality and consumer preferences are discussed. The integration of these technologies shows promising potential in the forthcoming to be adopted by the rice industry to assess rice quality traits and consumer preferences at a lower cost, shorter time, and more objectively compared to the traditional approaches.

Effects of degree of milling on nutritional quality, functional characteristics and volatile compounds of brown rice tea

This study investigated the effects of rice preparation using different degrees of milling (DOM) from 0% to 13% on the nutritional composition, functional properties, major volatile compounds and safety of brown rice tea (BRT). We found that 2% DOM reduced 52.33% of acrylamide and 31.88% of fluorescent AGEs. When DOM was increased from 0% to 13%, the total phenolic content (TPC) of brown rice tea decreased by 48.12%, and the total flavonoid content (TFC) and condensed tannin content (CTC) also decreased significantly, with the smallest decrease at 2% DOM. In addition, the inhibitory activities of α-amylase, α-glucosidase and pancreatic lipase as well as the antioxidant activity also decreased gradually. Analysis by electronic nose and gas chromatography-mass spectrometry (GC-MS) showed that alkanes, furans, aldehydes, pyrazines and alcohols were the major volatiles in BRT, with 2% DOM having the greatest retention of aroma compounds. An orthogonal partial least squares discriminant analysis (OPLS-DA) and VIP score (VIP > 1 and p < 0.05) analysis were used to screen 25 flavor substances that contributed to the differences in BRT aroma of different DOMs. These results suggest that 2% milled BRT can improve safety and palatability while maximizing the retention of flavor compounds and nutrients. The findings of this study contribute to an enhanced understanding of the dynamics of changes and preservation of aroma compounds and nutrients present during the processing of BRT.

Moderate Reduction in Nitrogen Fertilizer Results in Improved Rice Quality by Affecting Starch Properties without Causing Yield Loss

The quality and starch properties of rice are significantly affected by nitrogen. The effect of the nitrogen application rate (0, 180, and 230 kg ha^-1) on the texture of cooked rice and the hierarchical structure and physicochemical properties of starch was investigated over two years using two japonica cultivars, Bengal and Shendao505. Nitrogen application contributed to the hardness and stickiness of cooked rice, reducing the texture quality. The amylose content and pasting properties decreased significantly, while the relative crystallinity increased with the increasing nitrogen rates, and the starch granules became smaller with an increase in uneven and pitted surfaces. The proportion of short-chain amylopectin rose, and long-chain amylopectin declined, which increased the external short-range order by 1045/1022 cm^-1. These changes in hierarchical structure and grain size, regulated by nitrogen rates, synergistically increased the setback viscosity, gelatinization enthalpy and temperature and reduced the overall viscosity and breakdown viscosity, indicating that gelatinization and pasting properties were the result of the joint action of several factors. All results showed that increasing nitrogen altered the structure and properties of starch, eventually resulting in a deterioration in eating quality and starch functional properties. A moderate reduction in nitrogen application could improve the texture and starch quality of rice while not impacting on the grain yield.

Structural changes of starch under different milling degrees affect the cooking and textural properties of rice

A long-term consumption of white rice increases the risk of T2D. Finding an appropriate milling degree (MD) of rice balancing nutrition and palatability benefits public health. This study investigated effects of MD-0 s, 5 s, 60 s on morphological, cooking and textural properties of rice. Texture profile analysis showed that milling decreased hardness, while increased adhesiveness of rice. SEM images showed that milling induced notches and structural damage, which facilitated gelatinization of rice determined by DSC. Leached starch was further analyzed by size exclusion chromatography and chain-length distribution. Pearson correlation analysis revealed that milling induced more leached shot-chain amylose and long-chain amylopectin, which decreased hardness and increased adhesiveness of cooked rice. Collectively, milling-induced changes of starch gelatinization and fine structure of leached starch were decisive factors of rice texture. Moderate processing improved the texture of brown rice and maintained nutrients. This would provide guidance for the health industry of whole grains.

Starch fine molecular structures: The basis for designer rice with slower digestibility and desirable texture properties

Development of whole rice with low glycaemic index has been achieved, however, these rices are frequently associated with a poor texture property. Recent advances in terms of understanding the importance of starch fine molecular structures on the starch digestibility/texture of cooked whole rice have shed new insights on mechanisms of starch digestibility and texture from molecular levels. With an extensive discussion on the correlative and causal relationships among starch molecular structure, texture and starch digestibility of cooked whole rice, this review identified desirable starch fine molecular structures contributing to both slow starch digestibility and preferable textures. For instance, the selection of rice variety having more amylopectin intermediate chains while less amylopectin long chains might help develop cooked whole rice with both slower starch digestibility and softer texture. The information could help rice industry transform cooked whole rice into a healthier food product with slow starch digestibility and desirable texture.

The promoted hydrolysis effect of cellulase with ultrasound treatment is reflected on the sonicated rather than native brown rice

Brown rice is nutritionally superior to polished white rice, as it maintains a large content of external bran that involves a series of bioactive compounds. However, the presence of bran also restricts water diffusion and results in adverse quality of brown rice. In this work, ultrasound conditions were optimized for cellulase to improve its hydrolysis effect on rice bran, and combinations of enzymatic and ultrasound treatment in different manners were conducted on brown rice, to improve the textural attributes. The results showed significant improvements in the catalytic activity and efficiency of cellulase after ultrasonication at the optimal intensity of 1.67 W cm-3 and duration of 30 min, with the conformational variation of cellulase observed from the fluorescence spectra and circular dichroism (CD). Despite the enhanced activity of ultrasonicated cellulase, it leaded to a similar rice surface morphology and a comparable amount of released glucose, and equivalent textural parameters of brown rice treated by native cellulase. However, for the pre-sonicated brown rice, the ultrasonicated cellulase showed a significantly higher hydrolysis capacity than the untreated enzyme, suggesting the important influence of ruptured bran surface on amplifying the hydrolysis effect of cellulase. Compared to the successive ultrasound stimulation on both cellulase and brown rice, ultrasound-assisted cellulase treatment on brown rice produced less glucose from rice bran, but induced similar textural properties of brown rice, possibly resulting from the simultaneously promoting effect of ultrasonication on cellulase and water diffusion. Ultimately, this study highlighted that the mild rice surface rupture is a crucial factor to display the promoted hydrolysis effect of ultrasonicated cellulase on brown rice. Ultrasound-assisted cellulase treatment potentially provides an effective strategy to improve the edible quality of brown rice.

Effects of Processing on Starch Structure, Textural, and Digestive Property of "Horisenbada", a Traditional Mongolian Food

Horisenbada, prepared by the soaking, steaming, and baking of millets, is a traditional Mongolian food and is characterized by its long shelf life, convenience, and nutrition. In this study, the effect of processing on the starch structure, textural, and digestive property of millets was investigated. Compared to the soaking treatment, steaming and baking significantly reduced the molecular size and crystallinity of the millet starch, while baking increased the proportion of long amylose chains, partially destroyed starch granules, and formed a closely packed granular structure. Soaking and steaming significantly reduced the hardness of the millets, while the hardness of baked millets is comparable to that of raw millet grains. By fitting digestive curves with a first-order model and logarithm of the slope (LOS) plot, it showed that the baking treatment significantly reduced the digestibility of millets, the steaming treatment increased the digestibility of millets, while the soaked millets displayed a similar digestive property with raw millets, in terms of both digestion rate and digestion degree. This study could improve the understanding of the effects of processing on the palatability and health benefits of Horisenbada.