Influence of state and crystallinity of lipid matrix on physicochemical properties and permeation of capsaicin-loaded lipid nanoparticles for topical delivery

Enhanced stability and skin permeation of ibuprofen-loaded solid lipid nanoparticles based binary solid lipid matrix: Effect of surfactant and lipid compositions

Hypothesis

The type of emulsifier selected has an impact on the physicochemical properties of solid lipid nanoparticles (SLNs). This study was designed to compare the effects of emulsifiers on the physicochemical properties and in vitro skin performance of SLNs prepared from a binary mixture of Softisan® 378 (S378) and cetyl palmitate (CP) to those of SLNs prepared from only CP and S378.

Experiments

SLNs were prepared from CP, S378, or a binary mixture of CP and S378 (1:1 w/w) as the lipid phase and stabilized with Tego®Care 450 (TG450) or poloxamer 188 (P188) containing 1.0% w/w ibuprofen loading. The physicochemical properties including the particle size, polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (E.E.), crystallinity (%CI), and polymorphism were determined after production and after storage for 180 days under different conditions. In addition, in vitro drug release and permeation through human skin was studied after production and storage at room temperature for 180 days.

Finding

The particle sizes of ibuprofen-loaded SLNs (IBSLNs) stabilized with P188 (IBSLN-P188) were smaller than those of SLNs stabilized with TG450 (IBSLN-TG450) (p < 0.05). After 180 days, the particle sizes of the IBSLNs were slightly increased compared to those at the initial time but were <250 nm. The IBSLN-TG450 sample showed a higher %CI than IBSLN-P188 prepared with similar propotions of CP and S378, and ibuprofen crystals were observed in the IBSLN1-TG450 sample after storage at 4 °C for 180 days. Based on the result of the in vitro release study and the in vitro skin permeation test, the addition of S378 into the CP-matrix modified ibuprofen release and skin permeation both permeated ibuprofen through the epidermis and retained ibuprofen in the epidermis. In addition, the storage time affected the release and skin permeation of ibuprofen from the SLNs, which depended on the composition of the IBSLNs.

Influence of Vegetable Oils on In Vitro Performance of Lutein-Loaded Lipid Carriers for Skin Delivery: Nanostructured Lipid Carriers vs. Nanoemulsions

Nanostructured lipid carriers (NLC) were prepared from solid lipid (glyceryl monostearate, GMS) and vegetable oils, including palm oil (PO), rice bran oil (RBO) or virgin coconut oil (VCO), at different ratios (95:5, 90:10 and 80:20), while nanoemulsions (NE) were prepared with sole vegetable oils. After production, the particle size of the lutein-free NLC and NE was found to be between 100 and 150 nm and increased after loading with lutein. An increase in oil loading in NLC reduced the particle size and resulted in a less ordered lipid matrix and an increase in % entrapment efficiency. From the stability study, it was observed that the types of oils and oil content in the lipid matrix had an impact on the chemical stability of lutein. Regarding the release study, lutein-loaded NE showed higher release than lutein-loaded NLC. Both NLC and NE prepared from VCO exhibited higher release than those prepared from PO and RBO, respectively (p < 0.05). In contrast, among the formulations of NLC and NE, both lutein-loaded NLC and NE prepared from RBO showed the highest permeation through the human epidermis due to the skin enhancement effect of RBO. Based on all the results, the lipid nanocarriers composed of RBO could effectively enhance the chemical stability of lutein and promote drug penetration into the skin.

Nanoemulsions Containing Megestrol Acetate: Development, Characterization, and Stability Evaluation

Many active pharmaceutical ingredients (API) are poorly soluble in water and their low oral bioavailability is a major hindrance to their potential use. Megestrol acetate (MGA) is insoluble in water and its oral absorption is limited and considerably affected by food. Nanoemulsions (NEs) can be used as effective oral drug delivery systems where the hydrophobic API is loaded into the oil phase. In this study, MGA-loaded NEs were prepared based on the spontaneous emulsification technique. The effects of different excipients such as ethanol, Tween 80, Lipoid E80, and medium-chain triglyceride (MCT) on the NEs characterization were investigated. The experimental results indicated that optimum MGA-loaded NEs (F20) were nanometer-sized droplets (166.9 ± 3.0 nm) with negative zeta potential (-12.2 ± 1.1 mV). The effect of polyvinylpyrrolidone (PVP) on characteristic properties of F20 was also evaluated. On the selected NEs, in vitro dissolution tests and stability studies in various mediums and storage conditions were performed. The encapsulation efficiency of NEs were > 99%. The overall droplet size of F20 and PVP-2 (PVP-coated NEs) remained relatively stable as the pH changed from 1.2 to 6.8. It was determined that F20 and PVP-2 remained stable at 4°C until 12 weeks and had higher cytotoxicity on MCF-7 cells. To conclude, droplet size, surface charge, and stability are important properties for NEs to have sufficient effectiveness. In this study, alternative oral NEs of low-solubility drug MGA were developed considering the above features.

Dermatokinetic assessment of luliconazole-loaded nanostructured lipid carriers (NLCs) for topical delivery: QbD-driven design, optimization, and in vitro and ex vivo evaluations

The present study is concerned with the QbD-based design and development of luliconazole-loaded nanostructured lipid carriers (NLCs) hydrogel for enhanced skin retention and permeation. The NLCs formulation was optimized employing a 3-factor, 3-level Box-Behnken design. The effect of formulation variable lipid content, surfactant concentration, and sonication time was studied on particle size and % EE. The optimized formulation exhibited particle size of 86.480 ± 0.799 nm; 0.213 ± 0.004 PDI, ≥ - 10 mV zeta potential and 85.770 ± 0.503% EE. The in vitro release studies revealed sustained release of NLCs up to 42 h. The designed formulation showed desirable occlusivity, spreadability (0.748 ± 0.160), extrudability (3.130 ± 1.570), and the assay was found to be 99.520 ± 0.890%. The dermatokinetics assessment revealed the C_{max Skin} to be ~ 2-fold higher and AUC_0-24 to be ~ 3-fold higher in the epidermis and dermis of NLCs loaded gel in contrast with the marketed cream. The T_max of both the formulations was found to be 6 h in the epidermis and dermis. The obtained results suggested that luliconazole NLCs can serve as a promising formulation to enhance luliconazole's antifungal activity and also in increasing patient compliance by reducing the frequency of application.

Skin penetration/permeation success determinants of nanocarriers: Pursuit of a perfect formulation

The advent of nanocarriers in the field of pharmaceutical drug delivery, while exhibiting considerable advantages, has created challenges for researchers. Among the applications of nanocarriers, drug delivery to the skin has attracted increasing attention in recent decades due to its advantages over oral and parenteral administration. Accordingly, this work attempts to discuss the major obstacles surrounding topically applied formulations and different nanocarriers' potential to overcome these barriers to investigate whether their passive penetration through the skin is likely. Therefore, skin anatomical views and transcutaneous pathways are briefly reviewed. Factors commonly thought to influence skin penetration are discussed from the perspective of particularly penetrating nanocarriers. The formulation of these nanocarriers is outlined, and promising constituents are highlighted to help investigators optimize nanocarrier formulations.

Dermatopharmacokinetic and pharmacodynamic evaluation of a novel nanostructured formulation containing capsaicinoids for treating neuropathic pain

The in vivo skin penetration by dermal microdialysis and the pharmacological efficacy of a chitosan hydrogel containing capsaicinoids-loaded nanocapsules (CHNC_Caps) was evaluated in this study. Such gel has previously been proven to control capsaicinoids release and decrease the drugs side effects in humans. The nanocapsules containing capsaicinoids had an average size around 150 nm, with a low polydispersity index, positive zeta potential, and high encapsulation efficiency of the drugs. The CHNC_Caps showed intact nanocapsules, a slightly acid pH value, and a pseudoplastic behavior suitable for topical application. Microdialysis experiments showed a 1.6-fold increase in the concentration of capsaicinoids in the dermis (after 12 h of its application) when CHNC_Caps was administered compared to a chitosan hydrogel containing capsaicinoids in hydroethanolic solution (CHET_Caps) and the commercial cream. The CHNC_Caps showed antiallodynic and antihyperalgesic effects from 6 h to 96 h after treatment initiation, whereas CHET_Caps and the commercial cream showed antiallodynic and antihyperalgesic effects only at 48 h and 96 h after treatment initiation, respectively. CHNC_Caps and the commercial cream maintained antihyperalgesic activity for 6 days after treatment interruption. For mechanical allodynia, the antinociceptive effect was maintained for 48 h after treatment interruption only with CHNC_Caps. In conclusion, CHNC_Caps is a promising formulation for treating peripheral neuropathic pain.

Nanomaterial Lipid-Based Carrier for Non-Invasive Capsaicin Delivery; Manufacturing Scale-Up and Human Irritation Assessment

Capsaicin is an active compound in chili peppers (Capsicum chinense) that has been approved for chronic pain treatment. The topical application of high-strength capsaicin has been proven to reduce pain; however, skin irritation is a major drawback. The aim of this study was to investigate an appropriate and scalable technique for preparing nanostructured lipid carriers (NLCs) containing 0.25% capsaicin from capsicum oleoresin (NLC_C) and to evaluate the irritation of human skin by chili-extract-loaded NLCs incorporated in a gel formulation (Gel NLC_C). High-shear homogenization with high intensity (10,000 rpm) was selected to create uniform nanoparticles with a size range from 106 to 156 nm. Both the NLC_C and Gel NLC_C formulations expressed greater physical and chemical stabilities than the free chili formulation. Release and porcine biopsy studies revealed the sustained drug release and significant permeation of the NLCs through the outer skin layer, distributing in the dermis better than the free compounds. Finally, the alleviation of irritation and the decrease in uncomfortable feelings following the application of the Gel NLC_C formulation were compared to the effects from a chili gel and a commercial product in thirty healthy volunteers. The chili-extract-loaded NLCs were shown to be applicable for the transdermal delivery of capsaicin whilst minimizing skin irritation, the major noncompliance cause of patients.

Enhanced Transdermal Delivery of Concentrated Capsaicin from Chili Extract-Loaded Lipid Nanoparticles with Reduced Skin Irritation

The aim of this study was to develop lipid-based nanoparticles that entrapped a high concentration of capsaicin (0.25%) from a capsicum oleoresin extract. The solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) were strategically fabricated to entrap capsaicin without a hazardous solvent. Optimized nanosize lipid particles with high capsaicin entrapment and loading capacity were achieved from pair-wise comparison of the solid lipid mixtures consisting of fatty esters and fatty alcohols, representing small and large crystal-structure molecules combined with a compatible liquid lipid and surfactants (crystallinity index = 3%). This report was focused on selectively captured capsaicin from oleoresin in amorphous chili extract-loaded NLCs with 85.27% ± 0.12% entrapment efficiency (EE) and 8.53% ± 0.01% loading capacity (LC). The particle size, polydispersity index, and zeta potential of chili extract-loaded NLCs were 148.50 ± 2.94 nm, 0.12 ± 0.03, and -29.58 ± 1.37 mV, respectively. The favorable zero-order kinetics that prolonged capsaicin release and the significantly faster transdermal penetration of the NLC attributed to the reduction in skin irritation of the concentrated capsaicin NLCs, as illustrated by the in vitro EpiDerm^TM three-dimensional human skin irritation test and hen's egg test chorioallantoic membrane assay (HET-CAM).

Carvacrol loaded nanostructured lipid carriers as a promising parenteral formulation for leishmaniasis treatment

Leishmaniasis are a group of neglected infectious diseases caused by protozoa of the genus Leishmania with distinct presentations. The available leishmaniasis treatment options are either expensive and/or; cause adverse effects and some are ineffective for resistant Leishmania strains. Therefore, molecules derived from natural products as the monoterpene carvacrol, have attracted interest as promising anti-leishmania agents. However, the therapeutic use of carvacrol is limited due to its low aqueous solubility, rapid oxidation and volatilization. Thus, the development of nanostructured lipid carriers (NLCs) was proposed in the present study as a promising nanotechnology strategy to overcome these limitations and enable the use of carvacrol in leishmaniasis therapy. Carvacrol NLCs were obtained using a warm microemulsion method, and evaluated regarding the influence of lipid matrix and components concentration on the NLCs formation. NLCs were characterized by DSC and XRD as well. In addition, to the in vitro carvacrol release from NLCs, the in vitro cytotoxicity and leishmanicidal activity assays, and the in vivo pharmacokinetics evaluation of free and encapsulated carvacrol were performed. NLCs containing carvacrol were obtained successfully using a warm microemulsion dilution method. The NLCs formulation with the lowest particle size (98.42 ± 0.80 nm), narrowest size distribution (suitable for intravenous administration), and the highest encapsulation efficiency was produced by using beeswax as solid lipid (HLB=9) and 5% of lipids and surfactant. The in vitro release of carvacrol from NLCs was fitted to the Korsmeyer and Peppas, and Weibull models, demonstrating that the release mechanism is probably the Fickian diffusion type. Moreover, carvacrol encapsulation in NLCs provided a lower cytotoxicity in comparison to free carvacrol (p<0.05), increasing its in vitro leishmanicidal efficacy in the amastigote form. Finally, the in vivo pharmacokinetics of carvacrol after IV bolus administration suggests that this phenolic monoterpene undergoes enterohepatic circulation and therefore presented a long half-life (t_1/2) and low clearance (Cl). In addition, C₀, mean residence time (MRT) and V_dss of encapsulated carvacrol were higher than free carvacrol (p < 0.05), favoring a higher distribution of carvacrol in the target tissues. Thus, it is possible to conclude that the developed NLCs are a promising delivery system for leishmaniasis treatment.

SLN and NLC for topical, dermal, and transdermal drug delivery

Introduction: From a biopharmaceutical standpoint, the skin is recognized as an interesting route for drug delivery. In general, small molecules are able to penetrate the stratum corneum, the outermost layer of the skin. In contrast, the delivery of larger molecules, such as peptides and proteins, remains a challenge. Nanoparticles have been exploited not only to enhance skin penetration of drugs but also to expand the range of molecules to be clinically used.Areas covered: This review focus on Solid lipid nanoparticles (SLN) and Nanostructured lipid carriers (NLC) for skin administration. We discuss the selection criteria for lipids, surfactants, and surface modifiers commonly in use in SLN/NLC, their production techniques, and the range of drugs loaded in these lipid nanoparticles for the treatment of skin disorders.Expert opinion: Depending on the lipid and surfactant composition, different nanoparticle morphologies can be generated. Both SLN and NLC are composed of lipids that resemble those of the skin and sebum, which contribute to their enhanced biocompatibility, with limited toxicological risk. SLN and NLC can be loaded with very chemically different drugs, may provide a tunable release profile, can be produced in a sterilized environment, and be scaled-up without the need for organic solvents.

Development and Characterization of Nano-emulsions Based on Oil Extracted from Black Soldier Fly Larvae

Insect-based biorefinery is seen as a potential alternative approach to manufacturing foods, feeds, and fuel because of the increasing demand for renewable and sustainable products. Insect oil and protein are the two major components that can be quantitatively obtained from insect farming. However, very few attempts have been conducted to utilize insect oil for the production of value-added products. In this study, the oil extracted from the black soldier fly (Hermetia illucens) larvae (BSFL) was used as a novel feedstock for preparing nano-emulsions. The nano-emulsions were prepared with BSFL oil, hydrogenated lecithin (HL), and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) in water using pre-homogenization followed by ultrasonication. The morphology and the particle size of nano-emulsions were affected by ratios of HL to TPGS. Moreover, the nano-emulsions showed a nearly Newtonian liquid behavior and the presence of TPGS was able to improve the storage stability of HL nano-emulsions. The addition of TPGS could eliminate the phase transition region of HL nano-emulsions but did not provide a significant change for the molecular mobility in the HL nano-emulsions. In summary, the BSFL oil could be used as a renewable feedstock for formulating nano-emulsions from the aspect of high value-added applications and physicochemical characteristics of the nano-emulsions could be adjusted by the mixed surfactant ratio, surfactant to oil ratio, and oil content. Graphical Abstract The physicochemical characteristics and optimization of nano-emulsions based on black soldier fly larvae oil were investigated.

Evaluation of the biocompatibility and skin hydration potential of vitamin E-loaded lipid nanosystems formulations: In vitro and human in vivo studies

Lipid-based nanosystems, such as nanostructured lipid carriers (NLC) and nanoemulsions (NE) have been described as promising alternatives to conventional formulations for increase skin hydration. Besides, these systems have been used as efficient vehicles for lipophilic molecules that improve skin properties (e.g. vitamin E). In this study, we performed comparative investigations between hydrogels formulations containing vitamin E-loaded NLC (HG-NLC_VE) and vitamin E-loaded nanoemulsion (HG-NE_VE). The experiments started with particle size measurements, which showed no significant differences between nanoparticles/nanodroplets sizes after incorporation in the hydrogel net (386 nm vs. 397 nm for HG-NLC_VE and 402 nm vs. 514 nm for HG-NE_VE). Afterwards, in vitro biocompatibility studies in human keratinocytes were carried out, being observed that the lipid-based nanosystems were more cytotoxic for the cells before incorporation in the hydrogel. Finally, the formulations hydration potential and sensory attributes for skin application were evaluated by in vitro occlusion tests and in vivo human experiments. The results showed that the HG-NLC_VE exhibited the best occlusive properties, whereas the HG-NE_VE performed a faster skin hydration effect. Furthermore, the latter was selected as the most attractive for skin application, although the HG-NLC_VE was described as more suitable to obtain a long-lasting effect. This study demonstrated the in vitro and in vivo safety and hydration potential of hydrogels containing vitamin E-loaded lipid-based nanosystems. These results establish a basis to assess the cutaneous use of these systems, despite more in vivo experiments, for longer periods and in more volunteers, are required before commercialization.