Preparation and evaluation of QbD based fusidic acid loaded in situ gel formulations for burn wound treatment

Topical amlodipine-loaded solid lipid nanoparticles for enhanced burn wound healing: A repurposed approach

Burn wounds are a complicated process with ongoing psychological and physical issues for the affected individuals. Wound healing consists of multifactorial molecular mechanisms and interactions involving; inflammation, proliferation, angiogenesis, and matrix remodeling. Amlodipine (ADB), widely used in cardiovascular disorders, demonstrated antioxidant and anti-inflammatory effects in some non-cardiovascular studies. It was reported that amlodipine is capable of promoting the healing process by regulation of collagen production, extracellular matrix, re-epithelialization and wound healing through its vasodilation and angiogenic activity. The objective of the current study is to appraise the wound healing capacity of amlodipine-loaded SLN (ADB-SLN) integrated into a hydrogel. The in-vitro characterization revealed that the optimized formulation was nanometric (190.4 ± 1.6 nm) with sufficiently high entrapment efficiency (88 % ± 1.4) and sustained ADB release (85.45 ± 4.45 % after 12 h). Furthermore, in-vivo evaluation was conducted on second-degree burns induced in male Sprague-Dawley rats. ADB-SLN gel revealed a high wound contraction rate and a significant improvement in skin regeneration and inflammatory biomarkers levels, confirming its efficiency in enhancing wound healing compared to other tested and commercial formulations. To conclude, the present findings proved that ADB-SLN integrated hydrogel offers a promising novel therapy for burn wound healing with a maximum therapeutic value.

Thermo-activated in situ rectal gel preparation for Ibuprofen using eutectic mixture

This study aimed to develop a thermosensitive in situ gel formulation for rectal delivery of Ibuprofen as an efficient alternative dosage form. Utilizing poloxamer 188, poloxamer 407, and HPMC via cold technique method, a thermosensitive in situ gel was successfully prepared. The concentration of Ibuprofen in the formulations was 1.2 % (w/w). The prepared gels underwent assessment for clarity, gelation temperature, gelation time, gel strength, spread ability, syringe-ability, pH, viscosity, FTIR, and drug content. The selected formulations exhibited a gelation temperature within the range of 30 °C to 36 °C, with consistent amount of drug soluble in the formulations (93 % - 110 %). Mucoadhesive studies, in vitro release tests, ex vivo modeling of drug release, kinetic studies modeling, and histopathology testing were also conducted. The formulation comprising 18 % poloxamer 407, 12 % poloxamer 188, and 1 % sodium chloride (FS15) demonstrated suitable gelation temperature and desirable drug release rate. In vitro drug release tests indicated completion within one hour for both FS10 (20 % P407 & 10 % P188) and FS15 (18 % P407 & 12 % P188), with consistent and predictable release patterns observed through kinetic modeling analysis. Microscopic histopathology examination confirmed the safety of the selected formula, exhibiting no irritation in the mucosal membrane of the sheep. In conclusion, Ibuprofen thermosensitive in situ gel presents a promising and convenient strategy as a rectal carrier and an alternative dosage form to solid suppositories.

Development of thermosensitive liposome-containing in-situ gel systems for intranasal administration of thiocolchicoside and in vivo evaluation in a rabbit model

AIM

Thiocolchicoside (THC) is a drug under the category of BCS III. Due to its high molecular weight, it has poor oral bioavailability and low skin permeability. This study aims to find an alternative delivery method for THC that enhances its bioavailability through nasal application approach. In situ gels containing plain or liposomal THC with different combinations of Pluronic® F127 and PEG 400 were prepared.

METHOD

Liposome formulations were prepared using the thin film hydration method and tested for their characterization such as for drug content, particle size, and zeta potential. In vivo pharmacokinetic parameters of formulations such as Cmax, Tmax, and AUC were tested on the rabbit model. The formulations were also scrutinized for their cell viability properties.

RESULT

Formulation composition with 2% soybean phosphatidylcholine and 10 mg THC exhibited ∼94% entrapment efficiency, minimum particle size 101.32 nm, low polydispersity index 0.225 and +0.355 zeta potential. In situ liposomal dispersion containing 15% Pluronic® F127 turned into gel at nasal temperature. Cell lines were unharmed for 48 h. İn situ liposomal gels showed 1.5x higher blood concentration than the control formula.

CONCLUSION

In situ gels of liposomal THC formulations offer advantages over traditional nasal solutions, demonstrating comparable bioavailability to parenteral medication while also preserving the health of nasal mucosa cells.

Novel Microemulsion Containing Benzocaine and Fusidic Acid Simultaneously: Formulation, Characterization, and In Vitro Evaluation for Wound Healing

Modern drug carrier technologies, such as microemulsions with small droplet sizes and high surface areas, improve the ability of low water solubility active ingredients to permeate and localize. The goal of this study was to create microemulsion formulations for wound healing that contained both fusidic acid (FA), an antibacterial agent, and benzocaine (BNZ), a local anesthetic. Studies on characterization were carried out, including viscosity, droplet size, and zeta potential. The drug-loaded microemulsion had a stable structure with -3.014 ± 1.265 mV of zeta potential and 19.388 ± 0.480 nm of droplet size. In both in vitro release and ex vivo permeability studies, the microemulsion was compared with Fucidin cream and oily BNZ solution. According to the drug release studies, BNZ release from the microemulsion and the BNZ solution showed a similar profile (p > 0.05), while FA release from the microemulsion had a higher drug release compared to Fucidin cream (p < 0.001). The microemulsion presented lower drug permeation (p > 0.05) for both active ingredients, on the other hand, provided higher drug accumulation compared to the control preparations. Moreover, according to the results of in vitro wound healing activity, the microemulsion indicated a dose-dependent wound healing potential with the highest wound healing activity at the highest concentrations. To the best of our knowledge, this developed BNZ- and FA-loaded microemulsion would be a promising candidate to create new opportunities for wound healing thanks to present the active ingredients, which have low water solubility, in a single formulation and achieved higher accumulation than control preparations.

Sprayable ciprofloxacin-loaded poloxamer hydrogels for wound infection treatment

Topical antimicrobial treatments for severe burns and chronic wounds provide effective treatment against infections, but cause pain and discomfort with application. This study aimed to develop an antimicrobial topical formulation comprising thermoreversible poloxamers (Pluronic F127 and F68) and a broad-spectrum antimicrobial agent (ciprofloxacin hydrochloride, CH), that could be sprayed to eliminate application pain while maintaining antimicrobial activity. Formulations were characterized to determine their sprayability under cold conditions, gelation temperature, final storage modulus at skin temperature, drug release profile, ex vivo permeation through impaired porcine skin, and inhibition against common bacterial pathogens that colonize wounds. All cold formulations were sprayable from simple hand-held, pump-action sprayers due to their low viscosity. Upon heating, 17 and 20% Pluronic F127 formulations produced hydrogels eight to ten degrees below skin temperature, independent of ciprofloxacin loading. Increasing concentrations of Pluronic F127 increased the final storage modulus and viscosity of the gels, while inclusion of Pluronic F68 reduced these properties, showing that hydrogel rheological properties at skin temperature can be tuned via choice of formulation. Drug release was directly correlated to the rheological properties, with stiffer gels resulting in a decrease in drug release rate. Overall, gels released about 65-90% of their load within 12 hours. Ex vivo skin permeation demonstrated that drug was well retained in impaired porcine skin, which is desired to continuously treat bacteria localized to the wound. A well-diffusion assay indicated that the hydrogels had greater bacterial inhibition against Pseudomonas aeruginosa, Escherichia coli, and two strains of Staphylococcus aureus when compared to commercial controls. Overall, the results show the potential of CH-loaded poloxamer formulations as suitable sprayable topical dressings to deliver antimicrobials directly to wounds.

Novel Sprayable Thermosensitive Benzydamine Hydrogels for Topical Application: Development, Characterization, and In Vitro Biological Activities

Benzydamine hydrochloride (BZD) having analgesic, anesthetic, and anti-inflammatory effects is used orally or topically in the treatment of disorders such as joint inflammation and muscle pain. Within the scope of this study, sprayable thermosensitive BZD hydrogels were developed using thermoresponsive poloxamers to avoid systemic side effects and to provide better compliance for topical administration. Also, hydroxypropyl methyl cellulose (HPMC) was employed to improve the mechanical strength and bioadhesive properties of the hydrogel. The addition of BZD generally decreased the viscosity of the formulations (p < 0.05), while increasing the gelation temperature (p < 0.05). The formulations that did not have any clogs or leaks in the nozzle of the bottle during the spraying process were considered lead formulations. To spray the formulations easily, it was found that the viscosity at RT should be less than 200 mPa·s, and their gelation temperature should be between 26 and 34°C. Increasing HPMC and poloxamer improved bioadhesion. The amount of HPMC and poloxamers did not cause a significant change in the release characteristics of the formulations (p > 0.05); the release profiles of BZD from the formulations were similar according to model-independent kinetic (f2 > 50). HPMC and poloxamers had important roles in the accumulation of BZD in the skin. In vitro biological activity studies demonstrated that the formulations presented their anti-inflammatory activity with TNF-α inhibition but did not have any effect on the inhibition of COX enzymes as expected. As a result, thermosensitive hydrogels containing BZD might be an appropriate alternative, providing an advantage in terms of easier application compared to conventional gels.

Spray coverage analysis of topical sprays formed by cold thermoreversible hydrogels

OBJECTIVE

Sprayable hydrogel formulations are promising topical treatments for skin wounds due to their ability to reduce application pain, prolong drug release, and provide moisture to promote skin healing. These viscoelastic materials, however, present challenges in spray ability which can be overcome using a thermoreversible hydrogels sprayed as lower viscosity liquids at cooler temperatures. The purpose of this research was to evaluate the impact of thermoreversible hydrogel formulation and device characteristics on topical spray patterns and to develop metrics to accurately describe surface coverage.

METHODS

Cold solutions of Pluronic F127 were prepared at 15, 17, and 20% (w/w) and tested to determine their rheological properties. Formulations were sprayed from hand-held atomizing pump dispersers under cold conditions and two distinct areas of their spray patterns analyzed: the concentrated core and the full spray pattern. Traditional analysis of spray patterns was conducted to determine major and minor axes, ovality, and total area. In addition, new scripts were developed to evaluate the concentrated core.

RESULTS

The full spray pattern analysis quantified the total area over which the spray would extend a flat surface, while the concentrated core analysis quantified the continuous region where a drug dose would be concentrated. The combination of formulation viscosity, sprayer nozzle, and spray distance produced spray patterns from highly concentrated to highly dispersed. These parameters can be controlled to generate desired hydrogel spray patterns for application on skin surfaces.

CONCLUSION

The developed metrics provide a basis for topical spray analysis that can inform future product performance.

Carbohydrate polymer-based bioadhesive formulations and their potentials for the treatment of ocular diseases: A review

Eyes are directly exposed to the outer environment and susceptible to infections, leading to various ocular disorders. Local medication is preferred to treat eye diseases due to its convenience and compliance. However, the rapid clearance of the local formulations highly limits the therapeutic efficacy. In the past decades, several carbohydrate bioadhesive polymers (CBPs), such as chitosan and hyaluronic acid, have been used in ophthalmology for sustained ocular drug delivery. These CBP-based delivery systems have improved the treatment of ocular diseases to a large extent but also caused some undesired effects. Herein, we aim to summarize the applications of some typical CBPs (including chitosan, hyaluronic acid, cellulose, cyclodextrin, alginate and pectin) in treating ocular diseases from the general view of ocular physiology, pathophysiology and drug delivery, and to provide a comprehensive understanding of the design of the CBP-based formulations for ocular use. The patents and clinical trials of CBPs for ocular management are also discussed. In addition, a discussion on the concerns of CBPs in clinical use and the possible solutions is presented.

Carboxymethyl cellulose/poloxamer gels enriched with essential oil and Ag nanoparticles: promising wound dressings

Aim: Essential oils are promising antibacterial and wound-healing agents that should be explored for the design of wound dressings. Materials & methods: Topical gels prepared from a combination of carboxymethyl cellulose and poloxamer were incorporated with tea tree and lavender oil together with Ag nanoparticles. In vitro release, cytotoxicity, antibacterial, and wound healing studies were performed. Results: The gels displayed good spreadability with viscosity in the range of 210-1200 cP. The gels displayed promising antibacterial activity against selected Gram-positive and Gram-negative bacteria used in the study. The % cell viability of the gels was more than 90.83%. Conclusion: The topical gels displayed excellent wound closure in vitro revealing that they are potential wound dressings for bacteria-infected wounds.

Novel Formulation of Fusidic Acid Incorporated into a Myrrh-Oil-Based Nanoemulgel for the Enhancement of Skin Bacterial Infection Treatment

Fusidic acid (FA) is renowned as an effective bacteriostatic agent obtained from the fungus Fusidium coccineum, used for treating various eye and skin disorders. The objective of the present study was to develop, characterize, and evaluate the antibacterial activity of a novel FA nanoemulgel for topical skin application. Primarily, various fusidic acid nanoemulsion formulations were fabricated using different concentrations of myrrh essential oil, Tween 80 as a surfactant, and Transcutol® P as a co-surfactant. A Box−Behnken design was employed to select the optimized FA nanoemulsion formulation, based on the evaluated particle size and % of in vitro release as dependent variables. The optimized formula was incorporated within a hydrogel to obtain an FA nanoemulgel (FA-NEG) preparation. The formulated FA-NEG was evaluated for its visual appearance, pH, viscosity, and spreadability, compared to its corresponding prepared fusidic acid gel. In vitro release, kinetic study, and ex vivo drug permeation were implemented, followed by formulation stability testing. The FA-NEG exhibited a smooth and homogeneous appearance, pH value (6.61), viscosity (25,265 cP), and spreadability (33.6 mm), which were all good characteristics for appropriate topical application. A total of 59.3% of FA was released from the FA-NEG after 3 h. The ex vivo skin permeability of the FA-NEG was significantly enhanced by 3.10 ± 0.13-fold, showing SSTF of 111.2 ± 4.5 µg/cm2·h when compared to other formulations under investigation (p < 0.05). No irritation was observed upon applying the FA-NEG to animal skin. Eventually, it was revealed that the FA-NEG displayed improved antibacterial activity against a wide variety of bacteria when compared to its corresponding FA gel and marketed cream, indicating the prospective antibacterial effect of myrrh essential oil. In conclusion, the recommended formulation offers a promising antibacterial approach for skin infections.

Appraisal of anti-gout potential of colchicine-loaded chitosan nanoparticle gel in uric acid-induced gout animal model

Present study is aimed at transdermal delivery of colchicine-loaded chitosan nanoparticles. The nanoformulations were prepared utilising spontaneous emulsification method and optimised through 2³ factorial designs. The optimised formulation (CHNP-OPT) displayed an average particle size of 294 ± 3.75 nm, entrapment efficiency 92.89 ± 1.1% and drug content 83.45 ± 2.5%, respectively. In vitro release study demonstrated 89.34 ± 2.90% release over a period of 24 h. Further, CHNP-OPT incorporated into HPMC-E4M (hydroxypropyl methylcellulose) to form transdermal gel. CHNP_gel displayed 74.65 ± 1.90% permeation and stability over a period of 90 days. The anti-gout potential of CHNP_gel formulation was evaluated in vivo against monosodium urate (MSU) crystal-induced gout in animal model. There was significant reduction in uric acid level, during MSU administration, when compared with the conventional gel of colchicine. The enhanced therapeutic potential was witnessed through X-ray. The study revealed that colchicine-loaded CHNP_gel proved their supremacy over plain colchicine and can be an efficient delivery system for gout treatment.

Promising Polymeric Drug Carriers for Local Delivery: The Case of in situ Gels

BACKGROUND

At present, the controlled local drug delivery is a very promising approach compared to systemic administration, since it mostly targets the affected tissue. In fact, various drug carriers for local delivery have been prepared with improved therapeutic efficacy.

OBJECTIVE

in situ polymer gels are drug delivery systems that not only present liquid characteristics before their administration in body, but once they are administered, form gels due to gelation. Their gelation mechanism is due to factors such as pH alteration, temperature change, ion activation or ultraviolet irradiation. in situ gels offer various advantages compared to conventional formulations due to their ability to release drugs in a sustainable and controllable manner. Most importantly, in situ gels can be used in local drug delivery applications for various diseases.

METHODS

This review includes the basic knowledge and theory of in situ gels as well as their various applications according to their administration route.

RESULTS

Various natural, semisynthetic, and synthetic polymers can produce in situ polymeric gels. For example, natural polysaccharides such as alginic acid, chitosan, gellan gum, carrageenan etc. have been utilized as in situ gels for topical delivery. Besides the polysaccharides, poloxamers, poly(Nisopropylacrylamide), poly(ethyleneoxide)/ (lactic-co-glycolic acid), and thermosensitive liposome systems can be applied as in situ gels. In most cases, in situ polymeric gels could be applied via various administration routes such as oral, vaginal, ocular, intranasal and injectable.

CONCLUSION

To conclude, it can be revealed that in situ gels could be a promising alternative carrier for both chronic and immediate diseases.

Chitosan and phospholipid assisted topical fusidic acid drug delivery in burn wound: Strategies to conquer pharmaceutical and clinical challenges, opportunities and future panorama

Burn is the immense public health issue globally. Low and middle income countries face extensive deaths owing to burn injuries. Availability of conventional therapies for burns has always been painful for patients as well as expensive for our health system. Pharmaceutical experts are still searching reliable, cheap, safe and effective treatment options for burn injuries. Fusidic acid is an antibiotic of choice for the management of burns. However, fusidic acid is encountering several pharmaceutical and clinical challenges like poor skin permeability and growing drug resistance against burn wound microbes like Methicillin resistant Staphylococcus aureus (MRSA). Therefore, an effort has been made to present a concise review about molecular pathway followed by fusidic acid in the treatment of burn wound infection in addition to associated pros and cons. Furthermore, we have also summarized chitosan and phospholipid based topical dermal delivery systems customized by our team for the delivery of fusidic acid in burn wound infections on case-to-case basis. However, every coin has two sides. We recommend the integration of in-silico docking techniques with natural biomacromolecules while designing stable, patient friendly and cost effective topical drug delivery systems of fusidic acid for the management of burn wound infection as future opportunities.

Tazarotene-loaded in situ gels for potential management of psoriasis: biocompatibility, anti-inflammatory and analgesic effect

Psoriasis is a chronic autoinflammatory disorder characterized by patches of abnormal skin. For psoriasis management, the application of topical retinoids as Tazarotene is recommended. However, Tazarotene could induce skin irritation limiting its use. Herein, it is evaluated the possible usage of in situ gels for tazarotene skin delivery. The topical in situ gels were developed using thermosensitive poloxamers via cold method. They were examined for their appearance, sol-gel temperature, clarity, pH, viscosity, in vitro release, and stability. Their biocompatibility was evaluated by investigating their cytotoxicity and irritation inducing capacity. The possible anti-inflammatory and analgesic activities were determined by measuring the nitric oxide and prostaglandin E₂ levels production in LPS-stimulated RAW264.7 murine macrophage cells. It was revealed that the in situ gels had no cytotoxic effect (∼95-100% cell viability) and nor irritation potential (∼97% cell viability), according to the in vitro EpiDerm™ reconstituted skin irritation test. Additionally, the 10% tazarotene-in situ gels showed possible analgesic activity since the production of prostaglandin E₂ (PGE₂) was decreased. In further, both concentrations of 5% and 10% tazarotene-in situ gels inhibited significantly the nitrite oxide production at 16% and 19%, respectively. Finally, the prepared in situ gels can act as a potential non-irritant alternative option for tazarotene topical skin delivery.

Antibiotic Delivery Strategies to Treat Skin Infections When Innate Antimicrobial Defense Fails

The epidermal skin barrier protects the body from a host of daily challenges, providing protection against mechanical insults and the absorption of chemicals and xenobiotics. In addition to the physical barrier, the epidermis also presents an innate defense against microbial overgrowth. This is achieved through the presence of a diverse collection of microorganisms on the skin (the "microbiota") that maintain a delicate balance with the host and play a significant role in overall human health. When the skin is wounded, the local tissue with a compromised barrier can become colonized and ultimately infected if bacterial growth overcomes the host response. Wound infections present an immense burden in healthcare costs and decreased quality of life for patients, and treatment becomes increasingly important because of the negative impact that infection has on slowing the rate of wound healing. In this review, we discuss specific challenges of treating wound infections and the advances in drug delivery platforms and formulations that are under development to improve topical delivery of antimicrobial treatments.

Gel network comprising UV crosslinked PLGA-b-PEG-MA nanoparticles for ibuprofen topical delivery

Ibuprofen is a non-steroidal anti-inflammatory drug for the treatment of Rheumatoid Arthritis and osteoarthritis. In this study, we prepared topical gel network for enhancement of ibuprofen penetration, maintenance of controlled release and increased patient compliance. Nanoparticles containing ibuprofen were prepared by means of emulsion formation/solvent diffusion method using synthesized copolymer. Nanoparticles were then conjugated with aminoethylmethacrylate, resulting in ibuprofen-loaded nanoparticles in PLGA-b-PEG-MA structure. Ibuprofen-loaded gel networks were developed by crosslinking nanoparticles via UV exposure. Suitability for topical application has been assessed through characterization of particle size, zeta potential, morphology, encapsulation efficiency, in vitro release, cytotoxicity and enhancement of in vitro wound healing. The mean diameter of nanoparticles was measured as 230 ± 20 nm. Gel network formulations with higher particle size (2800 ± 350 nm) and zeta potential (39.8 ± 9.2 mV), depending on conjugation of methacrylate within copolymeric structure, and having encapsulation efficacy of 73.6 ± 2.8% were prepared. The in vitro release of ibuprofen was sustained for more than 7 hours. Gel network improved collagen synthesis, type I collagen mRNA expression and fibrosis in dose dependent manner. Based on this, we can conclude that PLGA-b-PEG gel network might be a promising systems for the local delivery of ibuprofen in RA patients.