Rapidly dissolving Felodipine nanoparticle strips -Formulation using Design of Experiment and Characterisation

Nanocarrier-based localized and effective treatment of renal disorders: currently employed targeting strategies

Renal disorders pose a global health threat, with targeted drug-delivery systems emerging as a promising strategy to enhance therapy safety and efficacy. Recent efforts have harnessed targeted nanomaterials for kidney disease treatment. While some systems remain in the early stages, they show immense potential in delivering cargo to specific sites. Through animal model experimentations, it has been demonstrated to reduce systemic side effects and enhance treatment effectiveness. This review presents current strategies for kidney disorder treatment, emphasizing site-specific targeting critical to renal disease pathophysiology. Recent advancements in nano-drug delivery systems for kidney targeting are explored. Finally, toxicological aspects and prospects of the most promising kidney-targeting delivery systems are discussed in this review article.

Novel tetrahydrocurcumin integrated mucoadhesive nanocomposite κ-carrageenan/xanthan gum sponges: a strategy for effective local treatment of oral cancerous and precancerous lesions

Oral cancer is one of the leading causes of death worldwide. Oral precancerous lesions (OPL) are the precursors of oral cancer, with varying degrees of progression. Tetrahydrocurcumin (THC) is a major metabolite of curcumin with superior anticancer properties against various types of cancer. However, THC's clinical outcome is limited by its poor aqueous solubility. Herein, we developed novel mucoadhesive biopolymer-based composite sponges for buccal delivery of THC, exploiting nanotechnology and mucoadhesion for efficient prevention and treatment of oral cancer. Firstly, THC-nanocrystals (THC-NC) were formulated and characterized for subsequent loading into mucoadhesive composite sponges. The anticancer activity of THC-NC was assessed on a human tongue squamous carcinoma cell line (SCC-4). Finally, the chemopreventive activity of THC-NC loaded sponges (THC-NC-S) was examined in DMBA-induced hamster OPL. The selected THC-NC exhibited a particle size of 532.68 ± 13.20 nm and a zeta potential of -46.08 ± 1.12 mV. Moreover, THC-NC enhanced the anticancer effect against SCC-4 with an IC50 value of 80 µg/mL. THC-NC-S exhibited good mucoadhesion properties (0.24 ± 0.02 N) with sustained drug release, where 90% of THC was released over 4 days. Furthermore, THC-NC-S had a magnificent potential for maintaining high chemopreventive activity, as demonstrated by significant regression in the dysplasia degree and a decline in cyclin D1 (control: 40.4 ± 12.5, THC-NC-S: 12.07 ± 5.2), culminating in significant amelioration after 25 days of treatment. Conclusively, novel THC-NC-S represent a promising platform for local therapy of OPL, preventing their malignant transformation into cancer.

Formulation and Characterization of Nanoparticulate Drug Carrier System for Lacidipine

Lacidipine, a calcium channel antagonist, is primarily used to treat hypertension. It is classified as a Biopharmaceutics Classification System Class II drug and exhibits an oral bioavailability of 10% due to its extensive hepatic first-pass metabolism. This research study focused on formulating lacidipine-loaded cubosomal nanovesicles developed into rapidly dissolving oral films as an alternative to overcome the downsides faced by conventional antihypertensive therapy. Lacidipine-loaded cubosomes were prepared utilizing a top-down technique using lipid and surfactant and were further developed into fast dissolving oral films. Box-Behnken design was used for the optimization of process variables to achieve minimum particle size and greater entrapment efficiency of the nanovesicles, and response data were statistically evaluated. The optimized cubosomal dispersions upon characterization reported particle size within nanorange (116.8-341 nm) and an entrapment efficiency of 88.15%-97.1%, with 91.72% of total drug content. Morphological studies revealed uniformly dispersed vesicles with cubic to spherical shape. Oral rapidly dissolving films, after evaluation, were reported to have transparent to opaque appearance with a highly porous nature, which was confirmed by scanning electron microscopic imaging and displayed uniformity in weight and thickness and reported optimum mechanical strength and considerable flexibility, with disintegration time of 37.67 ± 3.68 s and exhibited 91.44% ± 1.65% in vitro drug release after 6 min. Short-term stability studies conducted on films at 25°C ± 2°C and 60% ± 5% relative humidity for 3 months demonstrated no significant variation in morphological and mechanical properties. Therefore, lacidipine-loaded cubosomal rapid dissolving oral films may be a promising formulation approach for the management of hypertension.

Fabrication and characterization of orodispersible films loaded with solid dispersion to enhance Rosuvastatin calcium bioavailability

The present study was aimed to formulate and evaluate fast dissolving oral film of Rosuvastatin calcium to improve its bioavailability in comparison to typical solid oral dosage forms. The drug was formulated as solid dispersion with hydrophilic polymers and assessed for different constraints such as drug content, saturated solubility, and drug-polymer interaction. Best formula was selected and prepared in the form of orodispersible film. The films were developed by solvent casting method and examined for weight variations, drug content, folding endurance, pH, swelling profile, disintegration time, and in vitro dissolution. Further pharmacokinetic study was also performed on rabbit and compared with that of the marketed oral formulation. The drug and the polymers were found to be compatible with each other by FTIR study. Maximum solubility was found at drug polymer ratio of 1:4 and that was 54.53 ± 2.05 µg/mL. The disintegration time of the developed film was observed to be 10 ± 2.01 s, while release of the Rosuvastatin from the film was found to be 99.06 ± 0.40 in 10 min. Stability study shown that developed film was stable for three months. Further pharmacokinetic study revealed that developed orodispersible film had enhance oral bioavailability as compared to marketed product (Crestor® tablets). Conclusively, the study backs the development of a viable ODF of Rosuvastatin with better bioavailability.

Design and development of orally disintegrating films: A platform based on hydroxypropyl methylcellulose and guar gum

From a design of experiments (DOE) performed under four independent variables, with the filmogenicity conditions and shortest disintegration time as the answers, a new oral disintegrating film (ODF) based on hydroxypropyl methylcellulose (HPMC) and guar gum (GG) with the essential oil of Plectranthus amboinicus L. (EOPA) was developed. Sixteen formulations were tested for filmogenicity, homogeneity, and viability. The better selected ODF required 230.1 s for complete disintegration. The retention rate of the EOPA was quantified using the nuclear magnetic resonance hydrogen technique (H¹ NMR), which identified the presence of 0.14 % carvacrol. The scanning electron microscopy showed a smooth and homogeneous surface with the presence of small white dots. Through the disk diffusion test, the EOPA was able to inhibit the growth of clinical strains of the Candida genus and gram-positive and gram-negative bacterial strains. This work opens new perspectives for the development of antimicrobial ODFS used in clinical practice.

Nanocrystals for controlled delivery: State of the art and approved drug products

INTRODUCTION

Controlled/extended-release formulations offer numerous benefits over conventional especially reduced side effects, improved therapeutic outcomes and high patient compliance. Controlled release nanocrystal is extremely versatile technology with several advantages such as very high drug loading, ease of manufacturing, avoidance of dose dumping, reproducible drug release. Usually, nanonization of drug is performed to improve dissolution rate, intrinsic solubility and thereby bioavailability. Most of the times, this is done for immediate release dosage forms where objective is quick onset of action. However, nanocrystals can also provide a sustained, reproducible plasma concentration profile for weeks to months based on tissue microenvironment, surface coating administration route.

AREAS COVERED

This review briefly describes the methods for producing nanocrystals, summarizes preclinical research and commercial products demonstrating tremendous potential of controlled release nanocrystals.

EXPERT OPINION

Lipophilic drugs are attractive candidates for the development of nanocrystal based controlled release formulations. However, constraint should be practiced while generalizing the technology for the controlled release purpose. Not all drugs fit in the requirement from the perspectives of physicochemical properties or pharmacokinetic requirements. Additionally, technologies should be explored which can convert the nanocrystal into its final dosage form for administration yet preserves the benefits of small particle size and controlled release.

Formulation and Development of Oral Fast-Dissolving Films Loaded with Nanosuspension to Augment Paroxetine Bioavailability: In Vitro Characterization, Ex Vivo Permeation, and Pharmacokinetic Evaluation in Healthy Human Volunteers

Paroxetine (PX) is the most potent serotonin reuptake inhibitor utilized in depression and anxiety treatment. It has drawbacks, such as having a very bitter taste, low water solubility, and undergoing extensive first pass metabolism, leading to poor oral bioavailability (<50%). This work aimed to develop and optimize palatable oral fast-dissolving films (OFDFs) loaded with a paroxetine nanosuspension. A PX nanosuspension was prepared to increase the PX solubility and permeability via the buccal mucosa. The OFDFs could increase PX bioavailability due to their rapid dissolution in saliva, without needing water, and the rapid absorption of the loaded drug through the buccal mucosa, thus decreasing the PX metabolism in the liver. OFDFs also offer better convenience to patients with mental illness, as well as pediatric, elderly, and developmentally disabled patients. The PX nanosuspension was characterized by particle size, poly dispersity index, and zeta potential. Twelve OFDFs were formulated using a solvent casting technique. A 2² × 3¹ full factorial design was applied to choose the optimized OFDF, utilizing Design-Expert^® software (Stat-Ease Inc., Minneapolis, MN, USA). The optimized OFDF (F1) had a 3.89 ± 0.19 Mpa tensile strength, 53.08 ± 1.28% elongation%, 8.12 ± 0.13 MPa Young's modulus, 17.09 ± 1.30 s disintegration time, and 96.02 ± 3.46% PX dissolved after 10 min. This optimized OFDF was subjected to in vitro dissolution, ex vivo permeation, stability, and palatability studies. The permeation study, using chicken buccal pouch, revealed increased drug permeation from the optimized OFDF; with a more than three-fold increase in permeation over the pure drug. The relative bioavailability of the optimized OFDF in comparison with the market tablet was estimated clinically in healthy human volunteers and was found to be 178.43%. These findings confirmed the success of the OFDFs loaded with PX nanosuspension for increasing PX bioavailability.

Formulation, Optimization and Evaluation of Nanoparticulate Oral Fast Dissolving Film Dosage Form of Nitrendipine

The primary objective of the present research work was to develop nanoparticles incorporating (nanoparticulate) fast dissolving (orodispersible) film evincing enhanced solubility and bioavailability of nitrendipine (NIT). An antisolvent sonoprecipitation method was employed to produce the NIT nanosuspension (NS), which was optimized using the 3² optimal response surface design and then the optimized one was evaluated for various parameters (Gandhi et al., AAPS PharmSciTech 22 (1):1-15, 2021). The NIT nanoparticulate orodispersible film (N-ODF) was prepared utilizing the nanosuspension by the solvent casting method using the Vijay film-forming instrument. The N-ODF was optimized by the 2³ full factorial design and was evaluated for several parameters. The optimized NS depicted a particle size of 505.74 ± 15.48 nm with a polydispersity index (PDI) of 0.083 ± 0.006 (Fig. 1b). The NIT nanoparticles showed a striking increment in saturation solubility (26.14 times), when compared with plain NIT (2). The developed NIT N-ODF exhibited thickness (0.148 ± 0.008 mm), folding endurance (280.33 ± 5.51 times), surface pH (6.86 ± 0.05), tensile strength (8.25 ± 0.13 kg/cm²), % elongation (63.5 ± 1.97%), and disintegration time (24.60 ± 1.31 s) to be within the standard intended limit. The in vitro dissolution study unveiled 100.28 ± 2.64% and 100.68 ± 2.50% of NIT release from lyophilized nanocrystals (in 8 min) and N-ODF (in 3.5 min), respectively, whereas the conventional NIT tablet took 30 min to release 99.94 ± 1.57% of NIT (Gandhi et al., AAPS PharmSciTech 22 (1):1-15, 2021). The in vivo pharmacokinetic study in rabbits inferred the achievement of significantly (p < 0.05) higher bioavailability of NIT on release from N-ODF in comparison to the conventional NIT tablet. Thus, the generation of N-ODF can be considered as a propitious move toward improving the efficacy of NIT to treat hypertension and angina pectoris.

Liquid antisolvent recrystallization and solid dispersion of flufenamic acid with polyvinylpyrrolidone K-30

Flufenamic acid (FFA) is a Biopharmaceutical Classification System- II (BCS-II) class drug with poor bioavailability and a lower dissolution rate. Particle size reduction is one of the conventional approaches to increase the dissolution rate and subsequently the bioavailability. The use of the liquid antisolvent method for particle size reduction of FFA was studied in this work. Ethanol and water were used as solvent and antisolvent, respectively. Experimental parameters such as solution concentration (10–40 mg/ml), flow rate (120–480 ml/h), temperature (298–328 K) and stirring speed (200–800 rpm) were investigated. Furthermore, the solid dispersion of FFA was prepared with polyvinylpyrrolidone K-30 (PVP K-30) with different weight ratios (1:1, 1:2, 1:3 and 1:4) and samples were characterized using SEM, FTIR and XRD techniques. The experimental investigation revealed that higher values of concentration, injection rate, stirring speed, along with lower temperature favored the formation of fine particles. SEM analysis revealed that the morphology of raw FFA changed from rock-like to rectangular-like after liquid antisolvent recrystallization. FTIR analysis validated the presence of hydrogen bonding between FFA and PVP in solid dispersion. XRD analysis showed no significant change in the crystallinity of the processed FFA.