Antibiotic loaded electrospun poly (lactic acid) nanofiber mats for drug delivery system

Preparation and Characterization of Poly(lactic acid)-Based Poly(ethylene glycol) and Daphne Essential Oil-Loaded Smart Nanofibers for Thermal Protection

Phase change material (PCM) stores latent heat energy, and poly(ethylene glycol) (Mw: 4000) (PEG 4000) is also a solid-liquid PCM. PEG and poly(lactic acid) (PLA) polymers are biodegradable. Essential oils are known as plant extracts with antimicrobial properties. In this study, daphne essential oil (DEO) obtained by the distillation method and PLA/PEG/DEO composite nanofibers were prepared by the electrospinning method with PLA, PEG 4000, and daphne (Laurus nobilis L.) essential oil in certain ratios (100/100/20, 100/120/20, and 100/150/20). DEO showed an antibacterial effect against Staphylococcus aureus and Escherichia coli bacteria. Thermal behaviors of the nanofibers were characterized by differential scanning calorimetry and thermogravimetric analysis. Morphological features were observed by scanning electronic microscopy (SEM), crystal behavior by X-ray diffraction analysis, and molecular structures were examined by Fourier transform infrared spectroscopy. Essential oil composition was determined by GC-MS. The thermal decomposition temperatures of the nanofibers were found between 250 and 276 °C, and the latent heat storage energies of nanofibers were 69.06, 86.76, and 96.39 J g-1 at temperatures 59.0 and 54.37 °C. High PCM added fiber was observed as 182 nm diameter with 3.264 μm diameter spheres. The produced nanofiber matrix has the potential to be used in applications such as medicine, textile, and hot food logistics.

The Incorporated Drug Affects the Properties of Hydrophilic Nanofibers

Hydrophilic nanofibers offer promising potential for the delivery of drugs with diverse characteristics. Yet, the effects of different drugs incorporated into these nanofibers on their properties remain poorly understood. In this study, we systematically explored how model drugs, namely ibuprofen, carvedilol, paracetamol, and metformin (hydrochloride), affect hydrophilic nanofibers composed of polyethylene oxide and poloxamer 188 in a 1:1 weight ratio. Our findings reveal that the drug affects the conductivity and viscosity of the polymer solution for electrospinning, leading to distinct changes in the morphology of electrospun products. Specifically, drugs with low solubility in ethanol, the chosen solvent for polymer solution preparation, led to the formation of continuous nanofibers with uniform diameters. Additionally, the lower solubility of metformin in ethanol resulted in particle appearance on the nanofiber surface. Furthermore, the incorporation of more hydrophilic drugs increased the surface hydrophilicity of nanofiber mats. However, variations in the physicochemical properties of the drugs did not affect the drug loading and drug entrapment efficiency. Our research also shows that drug properties do not notably affect the immediate release of drugs from nanofibers, highlighting the dominant role of the hydrophilic polymers used. This study emphasizes the importance of considering specific drug properties, such as solubility, hydrophilicity, and compatibility with the solvent used for electrospinning, when designing hydrophilic nanofibers for drug delivery. Such considerations are crucial for optimizing the properties of the drug delivery system, which is essential for achieving therapeutic efficacy and safety.

Investigating How the Properties of Electrospun Poly(lactic acid) Fibres Loaded with the Essential Oil Limonene Evolve over Time under Different Storage Conditions

Essential oils have been identified as effective natural compounds to prevent bacterial infections and thus are widely proposed as bioactive agents for biomedical applications. Across the literature, various essential oils have been incorporated into electrospun fibres to produce materials with, among others, antibacterial, anti-inflammatory and antioxidant activity. However, limited research has been conducted so far on the effect of these chemical products on the physical characteristics of the resulting composite fibres for extended periods of time. Within this work, electrospun fibres of poly(lactic acid) (PLA) were loaded with the essential oil limonene, and the impact of storage conditions and duration (up to 12 weeks) on the thermal degradation, glass transition temperature and mechanical response of the fibrous mats were investigated. It was found that the concentration of the encapsulated limonene changed over time and thus the properties of the PLA-limonene fibres evolved, particularly in the first two weeks of storage (independently from storage conditions). The amount of limonene retained within the fibres, even 4 weeks after fibre generation, was effective to successfully inhibit the growth of model microorganisms Escherichia coli, Staphylococcus aureus and Bacillus subtilis. The results of this work demonstrate the importance of evaluating physical properties during the ageing of electrospun fibres encapsulating essential oils, in order to predict performance modification when the composite fibres are used as constituents of medical devices.

Trends in the Incorporation of Antiseptics into Natural Polymer-Based Nanofibrous Mats

Nanofibrous materials represent a very promising form of advanced carrier systems that can be used industrially, especially in regenerative medicine as highly functional bandages, or advanced wound dressings. By incorporation of antimicrobial additives directly into the structure of the nanofiber carrier, the functionality of the layer is upgraded, depending on the final requirement-bactericidal, bacteriostatic, antiseptic, or a generally antimicrobial effect. Such highly functional nanofibrous layers can be prepared mostly by electrospinning technology from both synthetic and natural polymers. The presence of a natural polymer in the composition is very advantageous. Especially in medical applications where, due to the presence of the material close to the human body, the healing process is more efficient and without the occurrence of an unwanted inflammatory response. However, converting natural polymers into nanofibrous form, with a homogeneously distributed and stable additive, is a great challenge. Thus, a combination of natural and synthetic materials is often used. This review clearly summarizes the issue of the incorporation and effectiveness of different types of antimicrobial substances, such as nanoparticles, antibiotics, common antiseptics, or substances of natural origin, into electrospun nanofibrous layers made of mostly natural polymer materials. A section describing the problematic aspects of antimicrobial polymers is also included.

Electroresponsive and pH-Sensitive Hydrogel as Carrier for Controlled Chloramphenicol Release

Multiresponsive hydrogels, which are smart soft materials that respond to more than one external stimulus, have emerged as powerful tools for biomedical applications, such as drug delivery. Within this context and with the aim of eliminating the systematic administration of antibiotics, special attention is being paid to the development of systems for controlled delivery of antibiotic for topical treatment of bacterial infections. In this work, an electro-chemo responsive hydrogel able to release chloramphenicol (CAM), a broad spectrum antibiotic also used for anticancer therapy, is proposed. This has been prepared by grafting poly(acrylic acid) (PAA) to sodium alginate (Alg) and in situ encapsulation of poly(3,4-ethylenedioxythiophene) nanoparticles loaded with CAM (PEDOT/CAM NPs), which were obtained by emulsion polymerization. Although the response to electrical stimuli of PEDOT was the main control for the release of CAM from PEDOT/CAM NPs, the release by passive diffusion had a relatively important contribution. Conversely, the passive release of antibiotic from the whole engineered hydrogel system, Alg-g-PAA/PEDOT/CAM, was negligible, whereas significant release was achieved under electrostimulation in an acid environment. Bacterial tests and assays with cancer cells demonstrated that the biological activity of CAM remained after release by electrical stimulation. Notably, the successful dual-response of the developed hydrogel to electrical stimuli and pH changes evidence the great prospect of this smart material in the biomedical field, as a tool to fight against bacterial infections and to provide local cancer treatment.

Bacterial Response to the Surface Aging of PLA Matrices Loaded with Active Compounds

The use of active components in biomaterials improves the properties of existing ones and makes it possible to obtain new devices with antibacterial properties that prevent infections after implantation, thus guaranteeing the success of the implant. In this work, cetyltrimethylammonium bromide (CTAB) and magnesium particles were incorporated into polylactic acid (PLA) films to assess the extent to which progressive aging of the new surfaces resists bacterial colonization processes. For this purpose, the films' surface was characterized by contact angle measurements, ToF-SIMS and AFM, and adhesion, viability and biofilm growth of Staphylococcus epidermidis bacteria on these films were also evaluated. The results show that the inclusion of Mg and CTAB in PLA films changes their surface properties both before and after aging and also modifies bacterial adhesion on the polymer. Complete bactericidal activity is exhibited on non-degraded films and films with CTAB. This antibacterial behavior is maintained after degradation for three months in the case of films containing a higher amount of CTAB.