Coronal resistance to fracture of endodontically treated teeth submitted to light-activated bleaching

Fracture strength and hybrid layer formation of endodontically-treated teeth after dental bleaching photoactivated with violet LED

OBJECTIVE

To evaluate in vitro the effect of dental bleaching using high concentration hydrogen peroxide (HP) photoactivated with violet LED on fracture strength and hybrid layer formation.

METHODS

forty endodontically-treated bovine teeth were randomized into four groups (n = 10): C - Control, HP - 35% hydrogen peroxide, HP-BL - 35% hydrogen peroxide photoactivated with blue LED, HP-VL - 35% hydrogen peroxide photoactivated with violet LED. Three bleaching sessions with an interval of 7 days between them were performed. After 10 days of the last bleaching session, the dental crowns were restored and submitted to the fracture strength test. Five specimens from each group were used to evaluate the hybrid layer formation by scanning electron microscope (SEM) images. One-way ANOVA and Kruskal-Wallis test were used for parametric and non-parametric data, respectively. Significance level of 5% was adopted to all the tests.

RESULTS

No differences on fracture strength among the groups were observed (p > 0.05). HP and HP-BL showed alterations on hybrid layer formation compared to C group (p < 0.05), but not for HP-VL (p > 0.05). No differences on hybrid layer formation were observed among HP, HP-VL and HP-BL groups (p > 0.05).

CONCLUSION

Dental bleaching, photoactivated or not, did not affect the fracture strength of endodontically-treated teeth. Regardless of the protocol used, hydrogen peroxide altered the hybrid layer formation at some level when the restoration was placed after 10 days of the last bleaching session.

Strengthening effect of different fiber placement designs on root canal treated and bleached premolars

To evaluate the strengthening effect of five different fibers with different placement designs in root canal treated and intracoronally bleached premolars. Seventy extracted single-rooted premolars were distributed into 7 groups (G1-G7). Group 1 (G1) included the intact (I) teeth as the negative control. Group 2 (G2) included root canal treated, intra-coronally bleached and composite (C) restored teeth as the positive control. In the other five test groups after root canal treatment the teeth were intra-coronally bleached and fiber materials were placed into standard MOD cavities in the following different designs: an intracanal rigid fiber/Reforpost (G3,RF), an intracanal flexible fiber/ Everstick (G4, FF), four intracanal flexible pin fibers/Dentapreg Pin (G5,PF), an intercuspal flexible fiber /Dentapreg SFU (G6, IF) or an intra-coronal horseshoe-shaped/ Dentapreg SFU (G7,CF). All cavities were filled with a microfilled resin composite. Fracture resistance was tested using a universal testing machine under a crosshead speed of 1 mm/minute. One-way ANOVA and Duncan's Multiple Range tests were used for statistical analysis. Fracture types were recorded. The fracture resistance values in descending order were G1(I): 1190.97 N > G6 (IF): 1138.78 N > G5 (PF): 942.45 N > G3 (RF): 737.40 N > G4 (FF):694.29 N > G2 (C): 611.83 N > G7 (CF): 542.78 N. There were statistically significant differences among the groups (p ≤ 0.05). In all groups, repairable coronal oblique fractures were mostly observed. Flexible fibers placed intercuspally exhibited a significantly better strengthening effect than those of the intracanal flexible and rigid fibers (p < 0.05).

Effect of Different Intraorifice Barriers and Bleaching Agents on the Fracture Resistance of Endodontically Treated Anterior Teeth

INTRODUCTION

Intraorifice barriers (IOBs) are usually used before internal bleaching for coronal sealing and the prevention of cervical resorption. The aim of this study was to investigate the effect of different IOBs on the fracture resistance (FR) of endodontically treated anterior teeth bleached with various bleaching agents (BAs).

METHODS

After performing root canal treatment for 72 extracted bovine upper incisors, the coronal 3 mm of gutta-percha was removed, and samples were classified into 3 based on the type of IOB: calcium-enriched mixture, mineral trioxide aggregate, and resin-modified glass ionomer. After applying IOBs, samples of each group were subdivided into 4 based on the BA: carbamide peroxide 45% (CP), hydrogen peroxide 35% (HP), sodium perborate (PB), and distilled water as the control. At the end of bleaching, the access cavities were restored with composite resin. The FR was measured with a universal testing machine at a crosshead speed of 5 mm/min. The data were analyzed using 2-way analysis of variance and least significant difference post hoc tests (P < .05).

RESULTS

The effect of BAs on the FR was significant (P < .05); however, the effect of the IOB and the interactive effect of these variables were not significant (P > .05). The FR in the HP and PB groups was significantly different from the control (P < .05) but that of CP was not significantly different from the control (P > .05).

CONCLUSIONS

Mineral trioxide aggregate and calcium-enriched mixture act similarly to resin-modified glass ionomer as an IOB. CP, unlike HP and PB, did not significantly decrease the FR.

Influence of Intracanal Irrigants on Coronal Fracture Resistance of Endodontically Treated and Bleached Teeth: An In vitro Study

Background:

Irrigation has a key role in the success of endodontic treatment. Intracanal irrigant solutions have adverse effects on the physical properties of dentin.

Aim:

The present study aimed to evaluate the effect of different irrigation protocols on coronal fracture resistance of endodontically treated teeth undergoing bleaching treatment.

Design and Materials and Methods:

Access cavities were prepared in 120 maxillary premolars which were divided into two groups (n = 60) – Group A: nonbleached, Group B: bleached (B). Each group was subdivided into five subgroups based on irrigation protocol (n = 12); G1: normal saline (NS), G2: 2.5% sodium hypochlorite (NaOCl), G3: 10% citric acid (CA), G4: 17% ethylene diamine tetra acetic acid, and G5: NaOCl plus CA. In Group B, the teeth were bleached using 38% hydrogen peroxide and 20% carbamide peroxide gels as in-office and at-home bleaching techniques for 3 weeks. All the teeth were restored with composite resin, thermocycled, and incubated for 24 h. The specimens underwent fracture resistance tests. Data were analyzed with ANOVA, Tukey honestly significant difference test, t-test, and Chi-squared test (α =0.05).

Results:

T-test showed significant differences between each two corresponding subgroups (P < 0.0001). In Group A, NS demonstrated significantly higher fracture resistance compared to others; however, minimum fracture resistance recorded in G2. In Group B, the maximum fracture resistance was recorded in G1, with the minimum being recorded in G5. Samples irrigated with NaOCl and NaOCl plus CA exhibited significantly lower fracture resistance compared to NS subgroup (P < 0.05).

Conclusions:

Within the limitations of this study, it can be concluded that the irrigation protocol used during endodontic treatment with/without bleaching can affect the coronal fracture resistance.

The degree of color change, rebound effect and sensitivity of bleached teeth associated with at-home and power bleaching techniques: A randomized clinical trial

Aim:

The purpose of the present randomized clinical trial was to evaluate the color change, rebound effect and sensitivity of at-home bleaching with 15% carbamide peroxide and power bleaching using 38% hydrogen peroxide.

Materials and Methods:

For bleaching techniques, 20 subjects were randomized in a split mouth design (at-home and power bleaching): In maxillary and mandibular anterior teeth (n = 20). Color was recorded before bleaching, immediately after bleaching, at 2 weeks, 1, 3 and 6 month intervals. Tooth sensitivity was recorded using the visual analog scale. The Mann-Whitney test was used to compare both groups regarding bleaching effectiveness (ΔE₁), rebound effect (ΔE₂) and color difference between the rebounded tooth color and unbleached teeth (ΔE₃) while the Wilcoxon compared ΔE within each group. Distribution of sensitivity was evaluated using the Chi-square test (α =0.05).

Results:

There was no significant difference between groups regarding ΔE₁ and ΔE₃ (P > 0.05). Even though, ΔE₂ showed no significant difference between groups after bleaching as well as at 2 week, 1 month and 3 month follow-up periods (P > 0.05). Although, significant difference was found in ΔE₂ (P < 0.05 Mann-Whitney) between two methods after 6 months and a high degree of rebound effect was obtained with power bleaching. Within each group, there was no significant difference between ΔE₁ and ΔE₃ (P < 0.05 Wilcoxon). The distribution of sensitivity was identical with both techniques (P > 0.05).

Conclusion:

Bleaching techniques resulted in identical tooth whitening and post-operative sensitivity using both techniques, but faster color regression was found with power bleaching even though color regression to the baseline of the teeth in both groups was the same after 6 months.

Fracture resistance of endodontically-treated teeth submitted to bleaching treatment with hydrogen peroxide and titanium dioxide nanoparticles photoactivated by LED-laser

Objective: The aim of this study was evaluate the fracture resistance of endodontically-treated teeth after bleaching treatment using 15% hydrogen peroxide plus titanium dioxide nanoparticles (15HPTiO2) photoactivated by LED-laser, in comparison with protocols using 35% hydrogen peroxide (35HP), 37% carbamide peroxide (37CP) or sodium perborate (SP). Material and method: After endodontic treatment, fifty bovine extracted incisors were divided into five groups (n = 10): G1- without bleaching; G2- 35HP; G3- 37CP; G4- 15HPTiO2 photoactivated by LED-laser and G5- SP. In G2 and G4, the bleaching protocol was applied in 4 sessions, with a 7 day interval between each session. In G3 and G5, the materials were kept in the pulp chamber for 21 days, but replaced every 7 days. After 21 days, the crowns were subjected to compressive load at a cross head speed of 0.5 mm/min, applied at 135° to the long axis of the root using an eletromechanical testing machine, until fracture. The data were submitted to ANOVA and Tukey tests (p = 0.05). Result: The bleaching treatment in endodontically-treated teeth with 15HP plus TiO2 nanoparticles and photoactivated by LED-laser caused reduction of the fracture resistance similarly provided by 35HP, 37CP or SP (p>0.05). All bleaching treatments reduced the fracture resistance compared to unbleached teeth (p<0.05). Conclusion: All bleaching protocols reduced the fracture resistance of endodontically-treated teeth, but there were no differences between each other.

Fracture resistance of teeth submitted to several internal bleaching protocols

AIM

The aim of this study was to evaluate the fracture resistance of teeth submitted to several internal bleaching protocols using 35% hydrogen peroxide (35HP), 37% carbamide peroxide (37CP), 15% hydrogen peroxide with titanium dioxide nanoparticles (15HPTiO2) photoactivated by LED-laser or sodium perborate (SP).

MATERIALS AND METHODS

After endodontic treatment, fifty bovine extracted teeth were divided into five groups (n = 10): G1-unbleached; G2-35HP; G3-37CP; G4-15HPTiO2 photoactivated by LED-laser and G5-SP. In the G2 and G4, the bleaching protocol was applied in 4 sessions, with 7 days intervals between each session. In the G3 and G5, the materials were kept in the pulp teeth for 21 days, but replaced every 7 days. After 21 days, the teeth were subjected to compressive load at a cross head speed of 0.5 mm/min, applied at 135° to the long axis of the root using an eletromechanical testing machine, until teeth fracture. The data were submitted to ANOVA and Tukey tests (α = 5%).

RESULTS

The 35HP, 37CP, 15HPTiO2 and SP showed similar fracture resistance teeth reduction (p > 0.05). All bleaching treatments reduced the fracture resistance compared to unbleached teeth (p < 0.05).

CONCLUSION

All bleaching protocols reduced the fracture resistance of endodontically-treated teeth, but there were no differences between each other.

CLINICAL SIGNIFICANCE

There are several internal bleaching protocols using hydrogen peroxide in different concentrations and activation methods. This study evaluated its effects on fracture resistance in endodontically-treated teeth.

The effect of cold-light-activated bleaching treatment on enamel surfaces in vitro

This in vitro study aims to evaluate the crystal and surface microstructure of dental enamel after cold-light bleaching treatment. Twelve sound human premolars were cross-split into four specimens, namely, mesio-buccal (Group LP), disto-buccal (Group P), mesio-lingual (Group NP) and disto-lingual (Group L) specimens. These four groups were treated using the standard cold-light bleaching procedure, a bleaching agent, a peroxide-free bleaching agent and cold-light, respectively. Before and after treatment, all specimens were analyzed by high-resolution, micro-area X-ray diffraction and scanning electron microscopy. Using a spectrometer, tooth color of all specimens was measured before and after treatment. The phase of the enamel crystals was identified as hydroxyapatite and carbonated hydroxyapatite. After treatment, specimens in Groups LP and P showed significantly weaker X-ray diffraction peaks, significant reduction in crystal size and crystallinity, significant increase in L* but decrease in a* and b*, and obvious alterations in the surface morphology. However, specimens in Groups NP and L did not show any significant changes. The cold-light bleaching treatment leads to demineralization in the enamel surface. The acidic peroxide-containing bleaching agent was the major cause of demineralization, whereas cold-light did not exhibit significant increase or decrease effect on this demineralization.

Effect of different restorative procedures on the fracture resistance of teeth submitted to internal bleaching

The aim of this study was to evaluate the influence of different restorative procedures on the fracture resistance of endodontically treated teeth submitted to intracoronal bleaching. Fifty upper central incisors were distributed into 5 groups: GI - healthy teeth; GII - endodontically treated teeth sealed with Coltosol; GIII - endodontically treated teeth bleached and sealed with Coltosol; GIV - endodontically treated teeth bleached and restored with composite resin; and GV - endodontically treated teeth bleached and restored with a fiberglass post and composite resin. In the bleached specimens, a cervical seal was made prior to bleaching with 38% hydrogen peroxide. The gel was applied on the buccal surface and in the pulp chamber, and was then light-activated for 45 s. This procedure was repeated three times per session for four sessions, and each group was submitted to the restorative procedures described above. The specimens were submitted to fracture resistance testing in a universal testing machine. There were statistically significant differences among the groups (p < 0.05). The mean value found for GIII was the lowest (0.32 kN) and was significantly different from the values found for GI (0.75 kN), GII (0.67 kN), GIV (0.70 kN), and GV (0.72 kN), which were not significantly different from each other (p > 0.05). The restorative procedures using composite resin were found to successfully restore the fracture resistance of endodontically treated and bleached teeth.

Effect of high-concentrated bleaching agents on the bond strength at dentin/resin interface and flexural strength of dentin

This study evaluated the effect of bleaching agents on bond strength at the dentin/resin interface and the flexural strength of dentin. Forty maxillary canines were selected for the study. In the shear strength test, 40 slabs of intracoronary dentin (5 x 5 mm) obtained from buccal surfaces of the crowns were included in acrylic resin. In the flexural strength test, 40 dentin bars (8 x 2 x 2 mm) were obtained from the roots. The 40 hemi-sections of the lingual surface were prepared for scanning electron microscopy (SEM). The specimens were divided into 4 groups according to the bleaching protocol (n=10): Unbleached (control), Sodium perborate + 20% hydrogen peroxide (SP + 20% HP), 37% carbamide peroxide (37% CP) and 38% hydrogen peroxide (38% HP). After 7 days, the bond strength specimens were restored and tested. Dentin bars were bleached and subjected to a three-point bending test. Data (MPa) were analyzed by ANOVA and Tukey's test (α=0.05). In the shear test, the control group was superior (p<0.05) to the bleached groups, which, in turn, were statistically similar (p>0.05). In the flexural strength test, the control group also had the highest values and differed significantly from the other groups (p<0.05). SEM revealed smear layer in all groups, with fissures in the bleached specimens. SP + 20% HP and 38% HP showed discontinuous interfaces with few tags. In conclusion, bond strength of restorative material to dentin and flexural strength of dentin were reduced after the use of high-concentration bleaching agents.

Microhardness of intracoronal dentin exposed to bleaching and fluoride treatment

OBJECTIVES

The aim of this study was to assess the surface microhardness (SMH) of intracoronal dentin exposed to 38% hydrogen peroxide (HP) light-activated or not and to 2% sodium fluoride gel (F2%) or 5% varnish (F5%).

STUDY DESIGN

Intracoronal dentin specimens were exposed to bleaching (B), bleaching and light activation (BL), or no bleaching (NB), followed by F2%, F5%, or no exposure (NF). SMH test was performed. Four specimens of each group were analyzed by scanning electron microscopy (SEM).

RESULTS

Analysis of variance and Tukey test (α = 5%) showed higher SMH of NB than BL or B. Specimens exposed to F5% presented the highest SMH and differed from F2% and NF. BL + NF yielded inferior SMH and was similar to B + NF, BL + F2%, B + F2%, BL + F5%, and NB + NF. NB + F5% showed superior values and did not differ from NB + F2%, B + F5%, and NB + NF.

CONCLUSIONS

Bleaching with 38% HP, light-activated or not, reduced the SMH of intracoronal dentin. F5% provided SMH to the level of unbleached specimens.

Fracture resistance of teeth subjected to internal bleaching and restored with different procedures

This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different procedures. Forty maxillary incisors were endodontically treated and assigned to 4 groups (n=10): G1- restored with composite resin (CR), G2- bleached with hydrogen peroxide (HP) and restored with CR, G3- restored with CR and fiberglass posts (CR + posts) and G4- bleached and restored with CR + posts. HP was applied in the buccal surface and pulp chamber 3 times at each one of 2 sessions with an interval of 7 days between them. Additional 10 sound incisors were subjected to fracture strength test (gold standard). The fracture strength (kN) was determined in an Instron machine. Data were analyzed by ANOVA and Tukey-Kramer test (α=0.05). The untreated teeth (gold standard) showed the highest (p<0.05) fracture strength (0.43 ± 0.16). Teeth restored with CR (G1) without internal bleaching had the lowest (p<0.05) fracture strength (0.23 ± 0.11). Teeth bleached and restored with CR (G2) (0.26 ± 0.10), restored with CR + posts ithout internal bleaching (G3) (0.31 ± 0.17) and, bleached and restored with CR + posts (G4) (0.33 ± 0.12) had intermediate values, sometimes similar to the group with the highest value, sometimes similar to the group with the lowest value. In conclusion, as far as the fracture strength is concerned, teeth subjected to internal bleaching can be restored with composite resin alone, as the use of posts in these teeth did not increase their resistance.

Ex-vivo evaluation of the intrapulpal temperature variation and fracture strength in teeth subjected to different external bleaching protocols

This study evaluated the influence of bleaching protocols on intrapulpal temperature and fracture strength of the bleached teeth. Ninety maxillary incisors were assigned to 9 groups (n=10): G1: 35% carbamide peroxide (35% CP), G2: 38% hydrogen peroxide (38% HP), G3: halogen light, G4: LED-laser, G5: 35% CP + halogen light, G6: 38% HP + halogen light, G7: 35% CP + LED-laser, G8: 38% HP + LED-laser, and G9: no treatment (control). Pulp space was widened, a thermocouple was introduced through the apex up to the pulp chamber and the temperature was recorded (°C). The fracture strength (kN) was determined using an Instron machine. Data were analyzed by ANOVA and Tukey's test (p<0.05). The halogen light alone (1.10 ± 0.24) (G3) and associated with 38% HP (1.15 ± 0.30) (G6) produced the highest temperature increase, statistically different (p<0.05) from the other groups. G1 (0.15 ± 0.06) and G6 (0.19 ± 0.07) produced the lowest values, statistically different (p<0.05) from G5 (0.65 ± 0.49). The bleaching protocols increased the temperature, but no increment exceeded the critical value of 5.6°C. Neither 35% CP nor 38% HP or the light sources alone altered the fracture strength of the teeth.

Fracture resistance of endodontically-treated teeth: effect of combination bleaching and an antioxidant

This in vitro study assessed the fracture resistance of endodontically-treated teeth undergoing combination bleaching with 38% and 9.5% hydrogen peroxide gels as in-office and at-home bleaching techniques, respectively. In addition, the effect of an antioxidizing agent, sodium ascorbate, was investigated.

METHODS AND MATERIALS

Sixty maxillary premolars were endodontically-treated, received a glass ionomer barrier as a mechanical seal and were embedded in acrylic resin up to the cemento-enamel junction. The specimens were divided into four groups (n = 15) as follows: G I: no bleaching, access cavity restored with resin composite (negative control); G II: bleached for three weeks daily using 9.5% hydrogen peroxide for two hours and three sessions of in-office bleaching using 38% hydrogen peroxide every seven days, then restored (positive control); G III: bleached similar to G II and restored after one week; G IV: bleached similar to G II, along with the use of an antioxidizing agent for 24 hours, then restored. In each in-office and at-home bleaching session, the whitening gels were applied to the buccal surface of the tooth and placed inside the pulp chamber (inside/outside bleaching technique). Finally, the specimens underwent fracture resistance testing; the data were analyzed using ANOVA and Scheffé's test (alpha = 0.05).

RESULTS

Significant differences were observed among the study groups (p < 0.05). Groups I and II demonstrated the highest and lowest fracture resistance, respectively. The samples that were not bleached (Group I) and the 10% sodium ascorbate gel group (Group IV) demonstrated significantly higher fracture resistance than the positive control group (p < 0.05). No significant differences were found between Groups III and II (p > 0.05).

CONCLUSION

Within the limitations of the current study, it can be concluded that the fracture resistance of endodontically-treated teeth decreases after combination bleaching. The use of sodium ascorbate can reverse decreased fracture resistance.

Permeability of different groups of maxillary teeth after 38% hydrogen peroxide internal bleaching

This study evaluated the influence of internal tooth bleaching with 38% hydrogen peroxide (H2O2) on the permeability of the coronal dentin in maxillary anterior teeth and premolars. Seventy teeth (14 per group) were used: central incisors (CI), lateral incisor (LI), canines (C), first premolars (1PM) and second premolars (2PM). Pulp chamber access and transversal sectioning at 2 mm from the cementoenamel junction were performed and the specimens were divided into 2 groups (n= 7): a) no treatment and b) bleaching with 38% H2O2. The bleaching agent was applied to the buccal surface and to the pulp chamber for 10 min. This procedure was repeated 3 times. The specimens were processed histochemically with copper sulfate and rubeanic acid, sectioned longitudinally, and digitalized in a scanner. The area of stained dentin was measured using Image Tool software. Data were analyzed statistically by ANOVA and Tukey's HSD test (?=0.05). There was statistically significant difference (p<0.001) among the untreated groups, CI (0.23 ± 0.26) having the lowest permeability and LI (10.14 ± 1.89) the highest permeability. Among the bleached groups, dentin permeability was increased in all groups of teeth except for 2PM. It may be concluded that bleaching with 38% H2O2 affected dentin permeability near the pulp chamber in maxillary anterior teeth and in first and second premolars.