Degraded prism sheaths in the transition region of hypomineralized teeth

Applications of scanning electron microscopy and focused ion beam milling in dental research

The abilities of scanning electron microscopy (SEM) and focused ion beam (FIB) milling for obtaining high-resolution images from top surfaces, cross-sectional surfaces, and even in three dimensions, are becoming increasingly important for imaging and analyzing tooth structures such as enamel and dentin. FIB was originally developed for material research in the semiconductor industry. However, use of SEM/FIB has been growing recently in dental research due to the versatility of dual platform instruments that can be used as a milling device to obtain low-artifact cross-sections of samples combined with high-resolution images. The advent of the SEM/FIB system and accessories may offer access to previously inaccessible length scales for characterizing tooth structures for dental research, opening exciting opportunities to address many central questions in dental research. New discoveries and fundamental breakthroughs in understanding are likely to follow. This review covers the applications, key findings, and future direction of SEM/FIB in dental research in morphology imaging, specimen preparation for transmission electron microscopy (TEM) analysis, and three-dimensional volume imaging using SEM/FIB tomography.

Evaluation of developmentally hypomineralised enamel after surface pretreatment with Papacarie Duo gel and different etching modes: an in vitro SEM and AFM study

PURPOSE

This study aimed at investigating the surface morphology and nanotopography of normal enamel (NE) and developmentally hypomineralised enamel (HE) when subjected to various pretreatment protocols under scanning electron microscopy (SEM) and atomic force microscopy (AFM).

METHODS

Sixteen NE, 16 creamy/white (CW) HE and 16 yellow/brown (YB) HE specimens sectioned from extracted hypomineralised first permanent molars (FPMs) were included in this study. They were randomly distributed into 12 experimental groups (n = 4). Each group involved the following: (1) deproteinisation with Papacarie Duo^® gel or no deproteinisation, and (2) the use of Scotchbond™ Universal Adhesive (Scotchbond) in self-etch (SE) mode or 37% phosphoric acid etchant. Subsequently, the surface morphology and nanotopography of pretreated enamel specimens were evaluated under SEM and AFM, respectively.

RESULTS

SEM observation showed that deproteinisation with Papacarie Duo^® gel before phosphoric acid etching led to favourable etching patterns. This was consistent across all groups irrespective of the type of enamel specimen and the severity of hypomineralisation. In contrast, AFM results identified three factors that influenced surface parameters: (1) type of enamel specimen, (2) severity of hypomineralisation and (3) etching mode. YB HE recorded higher surface roughness values than CW HE and NE when subjected to the same pretreatment protocol. Deproteinisation and the application of Scotchbond in SE mode led to minimal topographic changes; however, acid etching was associated with an increase in surface roughness.

CONCLUSION

Deproteinisation with Papacarie Duo^® gel followed by acid etching contributed to improved etching patterns on HE.

The use of transillumination in mapping demarcated enamel opacities in anterior teeth: A cross-sectional study

BACKGROUND

Despite intensive efforts for categorizing demarcated enamel opacities, often related to molar incisor hypomineralization (MIH), there is a lack of descriptive criteria aiming to describe them physically outside the scope of color and size. This is most likely due to the indices focusing on molar, not anterior, teeth.

AIM

To map and classify demarcated lesions on permanent anterior teeth using reflected and transilluminated light. The association between classification and related lesion characteristics was also examined.

DESIGN

Permanent anterior teeth with demarcated opacities related to MIH were selected. For each tooth, standardized photographs were taken using transmitted and reflected light. Each lesion was mapped and classified according to its color, lesion size, surface integrity, and type. The data were analyzed using the chi-square and Fisher's exact tests. A logistic regression analysis was performed to identify the risk of PEB.

RESULTS

There were significant relationships between lesion size, color, and type with surface integrity. Lesion type and size were more important than lesion color for assessing the risk of PEB. There was also a significant relationship between lesion size and lesion color.

CONCLUSIONS

Lesion size and type are significant clinical parameters for assessing the risk of PEB on enamel opacities related to MIH.

The geometrical structure of interfaces in dental enamel: A FIB-STEM investigation

In this study a high resolution structural analysis revealed that enamel prisms are surrounded by an interface that is discontinuous with frequent mineral to mineral contact separated by gaps. This contact manifests either by crystallites bridging the boundary between prismatic and interprismatic enamel or continuous crystallites curving and bridging the interprismatic enamel to the prisms. The geometrical resolution of this TEM investigation of the interfaces is ≤2 nm as a basis for micromechanical models. Within this resolution, contrary to existing structural descriptions of dental enamel structure in materials science literature, here the crystallites themselves are shown to be either in direct contact with each other, sometimes even fusing together, or are separated by gaps. Image analysis revealed that on average only 57 ± 15% of the interface consists of points of no contact between crystallites. This work reveals structural features of dental enamel that contribute important understanding to both the architecture and mechanical properties of this biological material. A new structural model is proposed and the implications for the mechanical properties of dental enamel are discussed. STATEMENT OF SIGNIFICANCE: In this study a high resolution structural analysis, employing focused ion beam and transmission electron microscopy revealed that enamel prisms are surrounded by interfaces that are discontinuous with frequent mineral to mineral contact separated by gaps. Although the interfaces in enamel have been investigated previously, existing studies are lacking in detail considering the geometry and morphology of the interfaces. We think that this result is of great importance when it comes to the understanding of the mechanical properties. In our opinion the concept of soft sheaths is no longer feasible. The resulting observations are included in a new structural model which provides new qualitative insights into the mechanical behavior. Existing analytical models were applied to simulate the new geometrical structure.

Bonding strategies for MIH-affected enamel and dentin

OBJECTIVES

Aim of the present study was to evaluate resin composite adhesion to dental hard tissues affected by molar incisor hypomineralisation (MIH).

METHODS

94 freshly extracted human molars and incisors (53 suffering MIH) were used. 68 teeth (35 with MIH) were used for μ-TBS tests in enamel and dentin, 26 (18 with MIH) for qualitative evaluation. Specimens were bonded with Clearfil SE Bond, Scotchbond Universal, and OptiBond FL. For MIH affected enamel, additional OptiBond FL groups with NaOCl and NaOCl+Icon were investigated. Beside fractographic analysis, also qualitative evaluations were performed using SEM at different magnifications as well as histological sectioning.

RESULTS

Highest μ-TBS values were recorded with dentin specimens (ANOVA, mod. LSD, p<0.05). Results were independent of adhesive and dentin substrate (p>0.05). Pre-test failures did not occur in dentin specimens. Sound enamel specimens exhibited significantly higher μ-TBS values than MIH enamel (p<0.05). The two-step self-etch adhesive (Clearfil SE Bond) and the two-step etch-and-rinse adhesive (Scotchbond Universal) showed the lowest values in affected enamel specimens (p<0.05) with most pre-test failures (p<0.05). OptiBond FL on affected enamel showed better results than Clearfil SE Bond (p<0.05). An additional pre-treatment of affected enamel with NaOCl or NaOCl and Icon did not enhance enamel bonding (p>0.05), however, it caused less pre-test failures (p<0.05). Micromorphological analyses revealed that conventional phosphoric acid etching produces a much less pronounced etching pattern in affected enamel and a porous structure as weak link for the resin-enamel bond was identified.

SIGNIFICANCE

Bonding to porous hypomineralized MIH enamel is the limiting factor in adhesion to MIH teeth. MIH-affected dentin may be bonded conventionally.

XRMA and ToF-SIMS Analysis of Normal and Hypomineralized Enamel

Molar incisor hypomineralization (MIH) is a developmental disturbance of the enamel. This study presents analyses of hypomineralized and normal enamel in first molar teeth diagnosed with MIH, utilizing time-of-flight secondary ion mass spectrometry area analyses and X-ray microanalysis of area and spot profiles in uncoated samples between gold lines which provide electrical conductivity. Statistical analysis of mean values allows discrimination of normal from MIH enamel, which has higher Mg and lower Na and P. Inductive analysis using complete data sets for profiles from the enamel surface to the enamel-dentin junction found that Mg, Cl and position in the profile provide useful discrimination criteria. Element profiles provide a visual complement to the inductive analysis and several elements also provide insight into the development of both normal and MIH enamel. The higher Mg content and different Cl profiles of hypomineralized enamel compared with normal enamel are probably related to a relatively short period during the development of ameloblasts between birth and the 1st year of life.

Developmental enamel defects in the primary dentition: aetiology and clinical management

Developmental enamel defects, presenting as enamel hypoplasia or opacities are caused by damage or disruption to the developing enamel organ as a result of inherited and acquired systemic conditions. The high prevalence of these defects in the primary dentition demonstrates the vulnerability of the teeth to changes in the pre- and postnatal environment. The presence of enamel hypoplasia increases the risk of primary teeth to early childhood caries and tooth wear as the defective enamel is thinner, more plaque retentive and less resistant to dissolution in acid compared to normal enamel. The purpose of this paper was to critically review the aetiology and clinical complications of developmental enamel defects in the primary dentition and propose recommendations for the clinical management of affected teeth.

Non-destructive management of white spot lesions by using tooth jewelry

Although several methods including composite resin restoration and microabrasion have been used for management of white spot lesion, tooth jewelry can be considered as another noninvasive option. This case report describes the management of white spot lesions by using tooth jewelry. This report also highlights the patients' preference for tooth jewelry as an esthetic concern.