A new use for self-etching resin adhesives: Cementing bone fragments

Bone adhesive materials: From bench to bedside

Biodegradable bone adhesives represent a highly sought-after type of biomaterial which would enable replacement of traditional metallic devices for fixation of bone. However, these biomaterials should fulfil an extremely large number of requirements. As a consequence, bone-adhesive biomaterials which meet all of these requirements are not yet commercially available. Therefore, this comprehensive review provides an extensive overview of the development of bone adhesives from a translational perspective. First, the definition, classification, and chemistry of various types of bone adhesives are highlighted to provide a detailed overview of this emerging class of biomaterials. In this review we particularly focused studies which describe the use of materials that are capable of gluing two pieces of bone together within a time frame of minutes to days. Second, this review critically reflects on i) the experimental conditions of commonly employed adhesion tests to assess bone adhesion and ii) the current state-of-the-art regarding their preclinical and clinical applicability.

Bond Strength and Adhesion Mechanisms of Novel Bone Adhesives

Bone adhesives offer distinct advantages over the use of screws to attached internal fixation plates (IFPs). As the chemical composition of bone is similar to dentine, it is possible that the types of monomers used to make dentine adhesives could be utilised to affix IFPs to bone. The ability to attach a bio-resorbable IFP to porcine bone was assessed for the monomer 10-methacryloyloxydecyl dihydrogen phosphate (MDP), used either as a homopolymer or a copolymer with urethane dimethacrylate (MDP + U). Additionally, the addition of a priming step (MDP + U + P) was evaluated. The chemical interactions of the monomers with bone were assessed using XRD and imaged using TEM, revealing the formation of nano-layered structures with the MDP primer, something we believe has not been reported on bone. In a 6-week artificial aging study both MDP + U and MDP + U + P demonstrated adequate shear bond strength to affix bio-resorbable IFPs. The cytotoxicity profiles of the adhesive formulations were determined using indirect and direct contact with MC3T3 cells, with indirect conditions suggesting the MDP + U + P is as cytocompatible as the resorbable IFP. The findings of this study suggest our newly developed adhesive has the potential to be used as a bone adhesive to affix bioresorbable IFPs.

Adhesives for treatment of bone fractures: A review of the state-of-the art

Treatment of fractures remains challenging and carries a high economical burden to both patients and society. In order to prevent some of the complications, the use of bone adhesives has been proposed, but up to date, bone adhesives are not part of the current clinical practice. Early results of use of bone cements and bone glues are promising, focusing in the areas of highly fragmented fractures, fixation of long bone fractures, filling bone voids and defects, promoting osseointegration, preventing non-union while maintaining the reduction of fracture fixation. This review aims to describe the state-of-the-art of the development, properties and use of adhesives in fracture treatment.

Development of a methacrylate-terminated PLGA copolymer for potential use in craniomaxillofacial fracture plates

We synthesised methacrylate-terminated PLGA (HT-PLGA, 85:15 LA:GA, 169kDa), for potential use as an adhesively attached craniomaxillofacial fracture fixation plate. The in vitro degradation of molecular weight, pH and flexural modulus were measured over 6weeks storage in PBS at 37°C, with commercially available high (225kDa, H-PLGA) and low (116kDa, L-PLGA) molecular weight 85:15 PLGAs used as comparators. Molecular weights of the materials reduced over 6weeks, HT-PLGA by 48%, H-PLGA by 23% and L-PLGA by 81%. HT-PLGA and H-PLGA exhibited a near constant pH (7.35) and had average flexural moduli in excess of 6GPa when produced, similar to that of the mandible. After 1week storage both exhibited a significant reduction in average modulus, however, from weeks 1-6 no further significant changes were observed, the average modulus never dropped significantly below 5.5GPa. In contrast, the L-PLGA caused a pH drop to below 7.3 by week 6 and an average modulus drop to 0.6 from an initial 4.6GPa. Cell culture using rat bone marrow stromal cells, revealed all materials were cytocompatible and exhibited no osteogenic potential. We conclude that our functionalised PLGA retains mechanical properties which are suitable for use in craniofacial fixation plates.

Osteoanagenesis after transplantation of bone marrow-derived mesenchymal stem cells using polyvinylidene chloride film as a scaffold

The aim of this study was to develop a new cell transplantation technique for osteoanagenesis at bone defect sites. Polyvinylidene chloride (PVDC) film was evaluated because of its good biocompatibility and flexibility. We used this film as both a cell scaffold and a barrier membrane. Initially, the cell compatibility of the PVDC film for fibroblast-like cells and osteoblast-like cells was confirmed. Subsequently, bone marrow cells were obtained from rats and cultured on PVDC films in two kinds of medium. The PVDC films with bone marrow-derived mesenchymal stem cells (MSCs) were then applied to critical-sized bone defects in the calvarial bone of rats. After the transplantation, the surgical sites were dissected out and evaluated by soft X-ray radiography, micro-CT analysis and histological examinations. The bone marrow-derived MSC-transplanted rats showed greater bone regeneration than the control rats. Therefore, PVDC film is considered to be useful as a scaffold for bone regeneration.