Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: a 3-year follow-up

Impact of Dentine Pretreatment with Matrix Metalloproteinase Inhibitors on Bond Strength of Coronal Composite Restorations: A Systematic Review and Meta-analysis of In Vitro Studies

Matrix metalloproteinase (MMP) enzymes participate in collagen matrix degradation, including in dentine, potentially compromising bond strength. Therefore, MMP inhibitors have been hypothesized to improve restoration bond strength and stability. This systematic review aimed to evaluate the influence of different MMP inhibitors applied as dentine surface pretreatments on the immediate (24 hours) and longer term (months) bond strength of direct coronal composite restorations. This systematic literature review followed the Preferred Reporting Items for Systematic Review and Meta-analyses (PRISMA) statement. A systematic literature search of three databases (Ovid MEDLINE, Ovid Embase, and Google Scholar) was conducted independently by two reviewers from inception to April 2022. An adapted quality assessment tool was independently applied by two reviewers for risk of bias assessment. RevMan v5.4 software was used for meta-analyses. A randomeffectsmodel was used to generatemean differences with 95% confidence intervals for treatment and control comparisons. The Q-test and I2-test were used to test for heterogeneity. The proportion of total variance across studies attributable to heterogeneity rather than chance was calculated. Overall effects were tested using the Z-test, while subgroup differences were tested using Chi-squared tests. Of 934 studies, 64 studies were included in the systematic review and 42 in the meta-analysis. Thirty-one MMP inhibitors were reported, three of which were included in the meta-analysis: 2% chlorhexidine (CHX), 0.3M carbodiimide (EDC), and 0.1% riboflavin (RIBO). Pretreatment with 2% CHX for 30 and 60 seconds did not significantly improve bond strength compared with controls either immediately or after long-termageing. However, pretreatment with 0.3MEDC and 0.1% RIBO (but not CHX) significantly improved bond strength compared with control groups both immediately and over time. Most studies showed a medium risk of bias. These in vitro findings pave the way for rationale clinical trialing of dentine surface pretreatment with MMP inhibitors to improve clinical outcomes.

Adhesion to enamel and dentine: an update

With the continuous development of adhesive technology leading to a wide variety of bonding systems in the market, clinicians are often faced with a vast number of systems to choose from. Although research and manufacture of bonding systems is constantly progressing, the focus has generally been on simplifying the bonding process by reducing the number of clinical steps, with little emphasis on evidence-based performance. This article draws attention to the current strategies of common commercially available products to guide clinicians during bonding system selection and application.

48-month clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A double-blind randomised clinical trial

OBJECTIVES

This study aimed to evaluate the effect of copper nanoparticles (CuNp) on the clinical performance of a universal adhesive system used as an etch-and-rinse or self-etch strategy.

METHODS

A total of 216 class V (non-carious lesions) restorations were randomly placed in 36 subjects according to the following groups: ERcu, adhesive in etch-and-rinse with 0.1% CuNp; ERct, adhesive in etch-and-rinse without CuNp; SEcu, adhesive in self-etch with 0.1% CuNp; and Sect, adhesive in self-etch without CuNp. Restorations were evaluated at baseline and at 6, 12, 18, 36, and 48 months, using the FDI and USPHS criteria. Appropriate statistical analyses were performed (α = 0.05).

RESULTS

After 48 months, 14 restorations were lost (two for ERcu, five for SEcu, and seven for SEct) and the retention rates (95% confidence interval [CI]) were 74.1% for ERcu (95% CI 61.1-83.8); 81.5% for ERct (95% CI 69.2-89.6); 64.8% (95% CI 51.5-76.2) for SEcu; and 64.8% (95% CI 51.5-76.2) for SEct, with statistical differences between SEct vs. ERct and SEcu vs. ERct (p < 0.05). No significant differences between the groups were observed when the secondary parameters were evaluated (p > 0.05). Nineteen restorations (two for ERcu, two for ERct, six for SEcu, and nine for SEct) showed minor marginal staining, and 44 restorations (7 for ERcu, 8 for ERct, 14 for SEcu, and 15 for SEct) presented minimal marginal adaptation defects.

SIGNIFICANCE

This is the first long-term clinical trial to show that the addition of CuNp to a universal adhesive system does not affect clinical performance.

Insight into the development of versatile dentin bonding agents to increase the durability of the bonding interface

Despite the huge improvements made in adhesive technology over the past 50 years, there are still some unresolved issues regarding the durability of the adhesive interface. A complete sealing of the interface between the resin and the dentin substrate remains difficult to achieve, and it is doubtful whether an optimal interdiffusion of the adhesive system within the demineralized collagen framework can be produced in a complete and homogeneous way. In fact, it is suggested that hydrolytic degradation, combined with the action of dentin matrix enzymes, destabilizes the tooth-adhesive bond and disrupts the unprotected collagen fibrils. While a sufficient resin–dentin adhesion is usually achieved immediately, bonding efficiency declines over time. Thus, here, a review will be carried out through a bibliographic survey of scientific articles published in the last few years to present strategies that have been proposed to improve and/or develop new adhesive systems that can help prevent degradation at the adhesive interface. It will specially focus on new clinical techniques or new materials with characteristics that contribute to increasing the durability of adhesive restorations and avoiding the recurrent replacement restorative cycle and the consequent increase in damage to the tooth.

Influence of chlorhexidine, propolis, pulpal pressure simulation, and aging on dentin bond strength

The present study evaluated the bond strength (μTBS) of dentin treated with chlorhexidine and propolis subjected to simulated pulpal pressure (SPP) and thermocycle aging. One hundred and twenty healthy human molars were sectioned to obtain 2 mm of dentin thickness and were divided into two groups (n = 60): SPP (15 cm H₂ O) and no SPP (Control group). Dentin surfaces were conditioned with 37% phosphoric acid for 15 s and were divided according to the dentin treatment (n = 20): Control; Chlorhexidine gluconate (0.2% for 30 s) and Propolis (aqueous propolis extract for 30 s). Half of the specimens were submitted to 15,000 thermocycle aging (5 ± 2°C and 55 ± 2°C). The samples were sectioned into beams and submitted to μTBS. Data were analyzed by three-way ANOVA (SPP × Dentin treatment × Thermocycle aging) and the Tukey's tests (p < .001). With regard to the SPP, ANOVA revealed that the Control group (32.98 MPa) had significantly higher values of μTBS when compared to the SPP (29.19 MPa). With regard to Thermocycle aging, no aging (34.05 MPa) had significantly higher values of μTBS when compared to the aging (28.12 MPa). With regard to the dentin treatment, Propolis and Chlorhexidine did not statistically influence the results (p > .05). The SPP and thermocycle aging negatively influenced the bond strength between the dentin and resin; the 0.2% chlorhexidine digluconate and aqueous propolis extract solutions did not interfere in the bond strength between the resin and dentin. The use of chlorhexidine and propolis as a dental treatment may not influence the dentin bond strength, but SPP and thermocycle aging may damage the longitudinal dentin bond strength.

Clinical Performance of Filled/Nanofilled Versus Nonfilled Adhesive Systems in Noncarious Cervical Lesions: A Systematic Review and Meta-analysis

CLINICAL RELEVANCE

The use of filled adhesive systems does not influence the clinical performance of the adhesive restoration in noncarious cervical lesions.

SUMMARY

Effect of Cavity Disinfectants on Dentin Bond Strength and Clinical Success of Composite Restorations-A Systematic Review of In Vitro, In Situ and Clinical Studies

Cavity disinfection becomes an important step before a dental restorative procedure. The disinfection can be obtained cleaning the dental cavity with antimicrobial agents before the use of adhesive systems. The aim of this study was to conduct a systematic review on the effect of different cavity disinfectants on restorations’ adhesion and clinical success. A search was carried out through the Cochrane Library, PubMed, and Web of Science. In vitro and in situ studies reporting results on dentin bond strength tests, and clinical studies published until August 2020, in English, Spanish and Portuguese were included. The methodological quality assessment of the clinical studies was carried out using the Revised Cochrane risk-of-bias tool. Chlorhexidine could preserve adhesion to dentin. EDTA and ethanol had positive results that should be further confirmed. Given the significant lack of scientific evidence, the use of lasers, fluoridated agents, sodium hypochlorite, or other products as cavity disinfectants should be avoided. Chlorhexidine is a safe option for cavity disinfection with adequate preservation of adhesion to dentin. Moreover, future researches should be focused on the efficacy of these disinfectants against cariogenic bacteria and their best application methods.

The effect of chlorhexidine primer application on the clinical performance of composite restorations: a literature review

To discuss the effectiveness of chlorhexidine (CHX) used as therapeutic dentin primer in adhesively bonded composite restorations. OVERVIEW: An electronic search in MEDLINE database, accessed through PubMed was conducted. No restrictions of languages and date of publication were made. The following key words were used: "chlorhexidine", "composite" and "composite resins." Clinical studies in which CHX was used during bonding procedures were included in this review. Six studies met the inclusion criteria. Of these, five studies were carried out on noncarious cervical lesions (NCCL). Only one study was carried out on class II preparation of permanent molars. In all studies, either etch-and-rinse and self-etch adhesive systems were used during bonding procedures. On the basis of the reviewed clinical trials, it can be concluded that CHX primer application does not seem to influence clinical outcome of composite restorations. CLINICAL SIGNIFICANCE: Current scientific evidence cannot neither strongly recommend nor discourage the application of CHX as therapeutic primer in composite restorations. Studies with longer follow-up periods with adhesive restorations placed on dentin after caries removal, rather than only on NCCL, are desirable to further investigate the therapeutic effect of CHX during bonding procedures.

Adhesive dentistry: Current concepts and clinical considerations

OBJECTIVES

To address contemporary concepts in adhesive dental materials with emphasis on the evidence behind their clinical use.

OVERVIEW

Adhesive dentistry has undergone major transformations within the last 20 years. New dental adhesives and composite resins have been launched with special focus on their user-friendliness by reducing the number of components and/or clinical steps. The latest examples are universal adhesives and universal composite resins. While clinicians prefer multipurpose materials with shorter application times, the simplification of clinical procedures does not always result in the best clinical outcomes. This review summarizes the current evidence on adhesive restorative materials with focus on universal adhesives and universal composite resins.

CONCLUSIONS

(a) Although the clinical behavior of universal adhesives has exceeded expectations, dentists still need to etch enamel to achieve durable restorations; (b) there is no clinical evidence to back some of the popular adjunct techniques used with dental adhesives, including glutaraldehyde-based desensitizers and matrix metalloproteinase inhibitors; and (c) the color adaptation potential of new universal composite resins has simplified their clinical application by combining multiple shades without using different translucencies of the same shade.

CLINICAL SIGNIFICANCE

New adhesive restorative materials are easier to use than their predecessors, while providing excellent clinical outcomes without compromising the esthetic quality of the restorations.

Current perspectives on dental adhesion: (1) Dentin adhesion - not there yet

The essential goal of any adhesive restoration is to achieve a tight and long-lasting adaptation of the restorative material to enamel and dentin. The key challenge for new dental adhesives is to be simultaneously effective on two dental substrates of conflicting nature. Some barriers must be overcome to accomplish this objective. While bonding to enamel by micromechanical interlocking of resin tags within the array of microporosities in acid-etched enamel can be reliably achieved and can effectively seal the restoration margins against leakage, bonding effectively and durably to organic and humid dentin is the most puzzling task in adhesive dentistry.

Much of the research and development of dental adhesives has focused on making the clinical procedure more user-friendly by reducing the number of bottles and/or steps. Although clinicians certainly prefer less complicated and more versatile adhesive materials, there is a trade-off between simplification of dental adhesives and clinical outcomes. Likewise, new materials are launched with claims of being novel and having special properties without much supporting evidence.

This review article discusses dental adhesion acknowledging pioneer work in the field, highlights the substrate as a major challenge to obtain durable adhesive restorations, as well as analyzes the three adhesion strategies and their shortcomings. It also reviews the potential of chemical/ionic dental adhesion, discusses the issue of extensively published laboratory research that does not translate to clinical relevance, and leaves a few thoughts in regard to recent research that may have implications for future adhesive materials.

Catechin-based Dentin Pretreatment and the Clinical Performance of a Universal Adhesive: A Two-year Randomized Clinical Trial

CLINICAL RELEVANCE

At 24 months, the dentin pretreatment with epigallocatechin-3-gallate did not impair the clinical performance of the adhesive Single Bond Universal regardless of the bonding strategy used.

SUMMARY

Purpose: To evaluate the two-year effect of dentin pretreatment with epigallocatechin-3-gallate (EGCG) on the clinical performance of restorations of noncarious cervical lesions (NCCLs) with Single Bond Universal, applied in two different modes (self-etch and etch-and-rinse).Methods and Materials: In this randomized clinical trial, 33 volunteers were selected, and 156 NCCLs were assigned to four groups: ER, etch-and-rinse; ER-EGCG, 0.1% EGCG dentin pretreatment + etch-and-rinse; SE, self-etch; and SE-EGCG, 0.1% EGCG dentin pretreatment + self-etch. The NCCLs were restored with a nanofilled resin composite and evaluated at baseline and at six, 12, 18, and 24 months using FDI criteria for retention, marginal staining, marginal adaptation, caries, and postoperative sensitivity. Two evaluators were blinded to the treatments performed, and impressions were taken for resin replicas to allow indirect observations. Statistical analyses were performed with Kruskal-Wallis and McNemar tests with a significance level of 5%.Results: Six restorations (one from ER, two from SE, one from ER-EGCG, and two from SEEGCG) were lost at 24 months with no significant differences (p>0.05). The retention rates were 97.0% (ER and ER-EGCG), 94.1% (SE), and 94.2% (SE-EGCG). For marginal adaptation, a significant difference was detected between the baseline and 24 months for the SE group (p=0.0313). There were no statistical differences among all other evaluated criteria at 24 months, neither for each group at baseline nor for 24-month comparisons (p>0.05).Conclusions: The pretreatment with EGCG provided no benefit in the clinical performance of the adhesive regardless of the bonding strategy used. In addition, it adds an additional required step to the restorative procedure.

Inhibition of matrix metalloproteinases: a troubleshooting for dentin adhesion

Matrix metalloproteinases (MMPs) are enzymes that can degrade collagen in hybrid layer and reduce the longevity of adhesive restorations. As scientific understanding of the MMPs has advanced, useful strategies focusing on preventing these enzymes' actions by MMP inhibitors have quickly developed in many medical fields. However, in restorative dentistry, it is still not well established. This paper is an overview of the strategies to inhibit MMPs that can achieve a long-lasting material-tooth adhesion. Literature search was performed comprehensively using the electronic databases: PubMed, ScienceDirect and Scopus including articles from May 2007 to December 2019 and the main search terms were “matrix metalloproteinases”, “collagen”, and “dentin” and “hybrid layer”. MMPs typical structure consists of several distinct domains. MMP inhibitors can be divided into 2 main groups: synthetic (synthetic-peptides, non-peptide molecules and compounds, tetracyclines, metallic ions, and others) and natural bioactive inhibitors mainly flavonoids. Selective inhibitors of MMPs promise to be the future for specific targeting of preventing dentin proteolysis. The knowledge about MMPs functionality should be considered to synthesize drugs capable to efficiently and selectively block MMPs chemical routes targeting their inactivation in order to overcome the current limitations of the therapeutic use of MMPs inhibitors, i.e., easy clinical application and long-lasting effect.

Effect of thermo-mechanical cycling and chlorhexidine on the bond strength of universal adhesive system to dentin

OBJECTIVES

This study evaluated the influence of thermo-mechanical cycling (TMC) on the bond strength (BS) of a universal adhesive system (UAS - Adper Single Bond Universal, 3M ESPE) to dentin treated or not with 0.2% chlorhexidine (CHX).

METHODS

Eighty human molars were flattened until reach the dentin and separated into 4 groups according to the bonding protocol: ENR Group: 37% phosphoric acid + 3-step etch-and-rinse adhesive system (ENR); UAS Group: UAS in self-etch mode; ENR + CHX Group: 37% phosphoric acid + CHX + ENR; UAS + CHX Group: CHX + UAS in self-etch mode. After treatments, teeth were restored (Filtek Z350, 3M ESPE). Samples (n = 10) were submitted to aging process: stored in distilled water at 37°C/30 days or TMC (ERIOS - 98N/1.6Hz + thermal cycling 5/37/55 °C - 1,200,000 cycles). Specimens were sectioned into sticks (1.0 mm2) and submitted to the microtensile test (Mechanical Test Machine - 0.5 mm/min). Fracture patterns and hybrid layer integrity were analyzed under Stereomicroscope and Scanning Electron Microscopy (SEM).

RESULTS

The BS results (3-way ANOVA, Bonferroni's test, α = 5%) showed that groups treated with CHX presented higher BS values than control groups; significant in all cases (p < .05), except for ENR submitted to TMC (p > .05). When CHX was applied and samples were cycled, UAS revealed higher BS (p < .05) than ENR. After TMC, cohesive fractures increased for UAS, regardless of CHX application. SEM analysis demonstrated different hybridization patterns for the adhesive systems tested.

CONCLUSION

The performance of the universal adhesive system used in self-etch mode was better than that of the 3-step etch-and-rinse adhesive system.

CLINICAL SIGNIFICANCE

Universal adhesive systems have been developed in order to simplify the dentin hybridization protocol. It is important to determine the longevity of the adhesive interface using these bonding materials after chewing.

Do Tooth- and Cavity-related Aspects of Noncarious Cervical Lesions Affect the Retention of Resin Composite Restorations in Adults? A Systematic Review and Meta-analysis

PURPOSE

The purpose was to perform a systematic review and meta-analysis based on the following research question: do tooth- and cavity-related aspects of noncarious cervical lesions (NCCLs) affect the retention of composite restorations?

METHODS

Randomized clinical trials (RCTs) that evaluated the retention rate of resin restorations in NCCLs were included for the identification and comparison of their characteristics. The search was conducted in PubMed and adapted for Scopus, Web of Science, Latin American and Caribbean Health Sciences Literature database (LILACS), Brazilian Library in Dentistry (BBO), Cochrane Library, and System for Information on Grey Literature in Europe (SIGLE) without restrictions until July 2018. Unpublished and ongoing trial registries were also searched. The Cochrane Collaboration tool was used for assessing risk of bias. The quality of the evidence was graded using the Grading of Recommendations: Assessment, Development and Evaluation. Using the random effects model, a meta-analysis was conducted for each aspect (arch distribution, tooth location, wear facets, dentin sclerosis, shape, size, depth, occluso-gingival distance, and margin location).

RESULTS

We retrieved 6738 articles. After removal of duplicates and nonrelevant articles, 24 RCTs remained. The anterior tooth location favored the retention rates of restoration of NCCLs (relative risk [RR], 1.08; 95% confidence interval [CI], 1.00-1.16). The presence of wear facets is a risk factor for the retention of restorations (RR, 0.91; 95% CI, 0.83-0.99). The evidence was moderate for arch distribution and low or very low for all other factors because of heterogeneity, imprecision, and inconsistency.

CONCLUSION

The tooth location and the presence of wear facets can affect the retention of composite resins in NCCLs.

18-month clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A double-blind, randomized controlled trial

OBJECTIVE

This study aimed to evaluate the addition of copper nanoparticles (CuNp) on the clinical performance of a universal adhesive system used as etch-and-rinse (ER) and self-etch (SE).

METHODS

216 restorations were randomly placed in 36 subjects according to the following groups: ERcu = etch-and-rinse with 0.1% CuNp; ERct = etch-and-rinse without CuNp; SEcu = self-etch with 0.1% CuNp; SEct = self-etch without CuNp. Resin composite was placed incrementally and light-cured. The restorations were evaluated at baseline and 6, 12 and 18 months using the FDI and USPHS criteria. Statistical analyses were performed using appropriate tests (α = 0.05).

RESULTS

The addition of CuNp did not increase the clinical performance (FDI / USPHS) of the universal adhesive tested after 18-month when applied in the ER mode (p > 0.05). The addition of CuNp in SE restorations increased the retention rate significantly and decreased the marginal discrepancies after 18 months (p < 0.05).

CONCLUSION

The clinical performance of universal adhesive was significantly increased when applied in the SE mode with the addition of copper nanoparticles.

CLINICAL RELEVANCE

This is the first study that demonstrates a slight improvement in the clinical performance of universal adhesive systems in non-carious cervical lesions when added CuNp in lower concentration.

Performance of Adhesives and Restorative Materials After Selective Removal of Carious Lesions: Restorative Materials with Anticaries Properties

Selective carious tissue-removal strategies require specific considerations in selection of restorative materials. A tight marginal seal placed over hard dentin and sound enamel is essential. For selective removal of carious tissue with permanent restoration, bioactive materials, such as high-viscosity glass-ionomer cement (HV-GIC) or calcium silicates, may be preferred over caries-affected firm or leathery dentin to improve remineralization. HV-GICs have the best clinical evidence of caries-arresting effect and demonstrate sufficient longevity as long-term provisional restorations that can later be used in open or closed sandwich restorations. As with any material, oral health maintenance remains important for long-term survival of restorations.

Compliance of Randomized Clinical Trials in Noncarious Cervical Lesions With the CONSORT Statement: A Systematic Review of Methodology

The literature was reviewed to evaluate the compliance of randomized clinical trials (RCTs) with the CONsolidated Standards of Reporting Trials (CONSORT ) and the risk of bias of these studies through the Cochrane Collaboration risk of bias tool (CCRT). RCTs were searched at Cochrane Library, PubMed, and other electronic databases to find studies about adhesive systems for cervical lesions. The compliance of the articles with CONSORT was evaluated using the following scale: 0 = no description, 1 = poor description, and 2 = adequate description. Descriptive analyses about the number of studies by journal, follow-up period, country, and quality assessments were performed with CCRT for assessing risk of bias in RCTs. One hundred thirty-eight RCTs were left for assessment. More than 30% of the studies received scores of 0 or 1. Flow chart, effect size, allocation concealment, and sample size were more critical items, with 80% receiving a score of 0. The overall CONSORT score for the included studies was 15.0 ± 4.8 points, which represents 46.9% of the maximum CONSORT score. A significant difference among countries was observed (p&lt;0.001), as well as range of year (p&lt;0.001). Only 4.3% of the studies were judged as at low risk; 36.2% were classified as having unclear risk and 59.4% as having high risk of bias. The adherence of RCTs evaluating adhesive systems to the CONSORT is low with unclear/high risk of bias.

Doxycycline-loaded nanotube-modified adhesives inhibit MMP in a dose-dependent fashion

OBJECTIVES

This article evaluated the drug loading, release kinetics, and matrix metalloproteinase (MMP) inhibition of doxycycline (DOX) released from DOX-loaded nanotube-modified adhesives. DOX was chosen as the model drug, since it is the only MMP inhibitor approved by the U.S. Food and Drug Administration.

MATERIALS AND METHODS

Drug loading into the nanotubes was accomplished using DOX solution at distinct concentrations. Increased concentrations of DOX significantly improved the amount of loaded DOX. The modified adhesives were fabricated by incorporating DOX-loaded nanotubes into the adhesive resin of a commercial product. The degree of conversion (DC), Knoop microhardness, DOX release kinetics, antimicrobial, cytocompatibility, and anti-MMP activity of the modified adhesives were investigated.

RESULTS

Incorporation of DOX-loaded nanotubes did not compromise DC, Knoop microhardness, or cell compatibility. Higher concentrations of DOX led to an increase in DOX release in a concentration-dependent manner from the modified adhesives. DOX released from the modified adhesives did not inhibit the growth of caries-related bacteria, but more importantly, it did inhibit MMP-1 activity.

CONCLUSIONS

The loading of DOX into the nanotube-modified adhesives did not compromise the physicochemical properties of the adhesives and the released levels of DOX were able to inhibit MMP activity without cytotoxicity.

CLINICAL SIGNIFICANCE

Doxycycline released from the nanotube-modified adhesives inhibited MMP activity in a concentration-dependent fashion. Therefore, the proposed nanotube-modified adhesive may hold clinical potential as a strategy to preserve resin/dentin bond stability.

[Progress on matrix metalloproteinase inhibitors]

Continuing advances in dentin bonding technology and adhesives revolutionized bonding of resin-based composite restorations. However, hybrid layers created by contemporary dentin adhesives present imperfect durability, and degradation of collagen matrix by endogenous enzymes is a significant factor causing destruction of hybrid layers. Bond durability can be improved by using enzyme inhibitors to prevent collagen degradation and to preserve integrity of collagen matrix. This review summarizes progress on matrix metalloproteinase inhibitors (including chlorhexidine, ethylenediaminetetraacetic acid, quaternary ammonium salt, tetracycline and its derivatives, hydroxamic acid inhibitors, bisphosphonate derivative, and cross-linking agents) and suggests prospects for these compounds.

Effectiveness of pre-treatment with chlorhexidine in restoration retention: A 36-month follow-up randomized clinical trial

OBJECTIVES

This study evaluated the effect of the pre-treatment with 2% chlorhexidine digluconate (CHX) as coadjutant in restoration retention of noncarious cervical lesions (NCCL), after 36 months of follow-up.

METHODS

A randomized controlled split-mouth and triple-blind (operators, patients and evaluator) trial was carried out. Patients (n=42) with at least two non-carious cervical lesions were included. The teeth with NCCL were randomly assigned to two treatment groups: application of 2% CHX (experimental group) or a placebo solution (control group) for 60s after acid etching and before the adhesive application. A trained and calibrated examiner evaluated the restorations at baseline (1 week) and at each recall (6, 12, 24 and 36 months) using the FDI criteria. A total of 225 restorations were evaluated after 36-month follow-up. Data were subjected to survival analysis using the Kaplan-Meier method, and the log-rank test was used to evaluate the existence of differences between the survival curves (α=0.05).

RESULTS

The restorations survival rate after 36 months of follow-up was 76.1%. There was no difference in the retention and failure rates between the experimental and the control group (p=0.968). There was an increased failure trend when restorations were located subgingival compared to those at the gingival level or supragingival.

CONCLUSION

The pre-treatment with 2% chlorhexidine digluconate did not promote further restoration retention of noncarious cervical lesions.

CLINICAL SIGNIFICANCE

The cavity pre-treatment with chlorhexidine for inhibition of hybrid layer degradation does not add any beneficial effect to the clinical performance of restorations.

The innovative applications of therapeutic nanostructures in dentistry

Nanotechnology has paved multiple ways in preventing, reversing or restoring dental caries which is one of the major health care problems. Nanotechnology aided in processing variety of nanomaterials with innovative dental applications. Some showed antimicrobial effect helping in the preventive stage. Others have remineralizing potential intercepting early lesion progression as nanosized calcium phosphate, carbonate hydroxyapatite nanocrystals, nanoamorphous calcium phosphate and nanoparticulate bioactive glass particularly with provision of self-assembles protein that furnish essential role in biomimetic repair. The unique size of nanomaterials makes them fascinating carriers for dental products. Thus, it is recentlyclaimedthat fortifying the adhesives with nanomaterials that possess biological meritsdoes not only enhance the mechanical and physical properties of the adhesives, but also help to attain and maintain a durable adhesive joint and enhanced longevity. Accordingly, this review will focus on the current status and the future implications of nanotechnology in preventive and adhesive dentistry.

Effect of Bioactive Primers on Bacterial-Induced Secondary Caries at the Tooth-Resin Interface

Secondary caries at the tooth-resin interface is the primary reason for replacement of resin composite restorations. The tooth-resin interface is formed by the interlocking of resin material with hydroxyapatite crystals in enamel and collagen mesh structure in dentin. Efforts to strengthen the tooth-resin interface have identified chemical agents with dentin collagen cross-linking potential and antimicrobial activities. The purpose of the present study was to assess protective effects of bioactive primer against secondary caries development around enamel and dentin margins of class V restorations, using an in vitro bacterial caries model. Class V composite restorations were prepared on 60 bovine teeth (n=15) with pretreatment of the cavity walls with control buffer solution, an enriched fraction of grape seed extract (e-GSE), 1-ethyl-3-(3-dimethyl aminopropyl)-carbodiimide/N-hydroxysuccinimide, or chlorhexidine digluconate. After incubating specimens in a bacterial model with Streptococcus mutans for four days, dentin and enamel were assessed by fluorescence microscopy. Results revealed that only the naturally occurring product, e-GSE, significantly inhibited the development of secondary caries immediately adjacent to the dentin-resin interface, as indicated by the caries inhibition zone. No inhibitory effects were observed in enamel margins. The results suggest that the incorporation of e-GSE into components of the adhesive system may inhibit secondary caries and potentially contribute to the protection of highly vulnerable dentin-resin margins.

Effect of Minocycline on the Durability of Dentin Bonding Produced with Etch-and-Rinse Adhesives

OBJECTIVES

To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (μTBS) and nanoleakage of two-step etch-and-rinse adhesives.

METHODS

Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces were treated with 37% phosphoric acid, rinsed, air-dried, and rewetted with water (control group), 2% minocycline, or 2% chlorexidine digluconate. Composite buildups were constructed incrementally, and specimens were longitudinally sectioned to obtain bonded sticks (0.8 mm²) to be tested in tension (0.5 mm/min) immediately or after 24 months of water storage. For nanoleakage, two specimens of each tooth/period were immersed in the silver nitrate solution, photo-developed, and polished with SiC paper for analysis under energy-dispersive X-ray spectroscopy/scanning electron microscopy.

RESULTS

Reductions of the μTBS and increases in the nanoleakage were observed for both adhesives when the rewetting procedure was performed with water. Stable bonds were observed for the 2% minocycline and 2% chlorexidine digluconate groups after 24 months.

CONCLUSIONS

The use of 2% minocycline as pretreatment of acid-etched dentin is one alternative to retard the degradation of resin-dentin interfaces over a 24-month period as well as 2% chlorexidine digluconate.

An in vitro evaluation of the effects of desensitizing agents on microleakage of Class V cavities

Background

The aim of this study was to evaluate the effect of a desensitizing agent on microleakage of Class V cavities.

Material and Methods

72 premolar teeth were used. There were 6 groups. Class V restorations were prepared with two different restorative materials (Equia fil, GC, America and Grandio, VOCO, Germany) and two adhesive systems (Clearfil SE Bond, Kuraray, Japan and S3 Bond Plus, Kuraray, Japan) with and without desensitizing agent (Gluma Desensitizer, Heraeus Kulzer, Germany). Restorations were polished with aluminum oxide abrasive discs. Then a range of 5 - 55C thermocycling was performed 10.000 times. The microleakage of restorations was examined with dye penetration method (Basic fuchsine). Bonferroni corrections and Kruskal-Wallis test were used to determine the significance of differences in occlusal and gingival dye penetration scores between groups.

Results

There was no stastistical significance between the occlusal and gingival microleakage scores within the groups were shown.

Conclusions

It can be concluded that use of desensitizing agent under both high viscosity glass ionomer restorative materials and resin composites doesn’t affect the microleakage.

Key words:High viscosity glass ionomer cement, composite resin, desensitizing agent, microleakage.

Effect of Two Matrix Metalloproteinase Inhibitors on the Color Stability of a Nanofilled Resin Composite

Objectives

This in vitro study evaluated the effect of two matrix metalloproteinase (MMP) inhibitors on the color stability of two shades of a nanofilled resin composite.

Methods and Materials

A total of 60 sound human molars were used in this study. Flat dentin surfaces were obtained by wet grinding the occlusal surfaces. Following acid etching, the molars were divided into three equal groups according to the MMP inhibitor used: Group 1: no inhibitor (control group), group 2: chlorhexidine digluconate based (CHX; Consepsis, Ultradent, South Jordan, UT, USA); group 3: doxycycline based (MTAD; Biopure, Dentsply TulsaDental, Johnson, TN, USA). Adper Single Bond 2 Adhesive (3M ESPE, St Paul, MN, USA) was applied to the treated dentin surfaces. Each group was then subdivided into two equal subgroups of 10 molars each, according to the shade of the resin composite (Filtek Z350 XT, 3M ESPE) used, either B1 or A3. The color was assessed for each subgroup at three times: baseline (after 24 hours); after aging using a total energy of 600 kJ/m2 (Weather-Ometer Ci35A, Atlas Electronic Devices Company, Chicago, IL, USA); and then after a second period of aging, for a total energy of 1200 kJ/m2. Color assessment was carried out using a spectrophotometer. Color change (ΔE) was calculated according to the Commission Internationale de l'Eclairage L*a* b* color scale, comparing each aging period with the baseline color measurement. Data were analyzed using repeated measures analysis of variance and Tukey post hoc test.

Results

All tested subgroups showed greater discoloration than the clinically acceptable level (3.3). MTAD induced the highest statistically significant color change, followed by CHX, whereas the control groups showed the lowest statistical ΔE values with both tested shades. Shade B1 subgroups showed higher ΔE values when compared with shade A3 subgroups.

Conclusion

Accelerated aging caused color change in a nanofilled resin composite regardless of MMP inhibitor used. Furthermore, lighter shades showed less color stability when compared with darker shades.

MMP Inhibitors on Dentin Stability: A Systematic Review and Meta-analysis

The aim of this study was to systematically review the literature for in vitro and ex vivo studies that evaluated the effect of matrix metalloproteinase (MMP) inhibitors during the adhesive procedure on the immediate and long-term resin-dentin bond strength. The search was conducted in 6 databases with no publication year or language limits, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. From 1,336 potentially eligible studies, 48 were selected for full-text analysis, and 30 were included for review, with 17 considered in the meta-analysis. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Pooled effect estimates were expressed as the weighted mean difference between groups. The most used MMP inhibitor was chlorhexidine (CHX). Immediate bond strength results showed no difference between 2% CHX and control; however, a difference was found between 0.2% CHX and control at baseline. After aging, CHX presented higher bond strength values compared to control groups (p < .05). However, this was not observed for longer periods of aging. High heterogeneity was found in some comparisons, especially for the water storage aging subgroup. Subgroup analyses showed that self-etching and etch-and-rinse adhesives are benefited by the CHX use. From the studies included, only 1 presented low risk of bias, while the others showed medium or high risk of bias. The use of MMP inhibitors did not affect the immediate bond strength overall, while it influenced the aged bond strength. Aging procedures influenced bond strength values of the dentin adhesion stability.