Human epithelial tissue culture study on restorative materials

The natural CAD/CAM anterior implant single tooth restoration: A novel digital workflow

OBJECTIVE

To report a novel digital workflow to replace an anterior maxillary tooth lost due to trauma with an implant multilayer restoration by using the patient's extracted tooth as a final crown restoration using computer-aided design/computer-aided manufacturing (CAD/CAM) technology.

CLINICAL CONSIDERATIONS

Instead of using the patient's natural tooth as an immediate provisional restoration to achieve predictable results in terms of esthetics and soft tissue structure, a novel digital strategy was performed to obtain a natural final crown restoration by using the patient's tooth associated with a lithium disilicate customized implant abutment.

CONCLUSIONS

The perspective of using this strategic approach for implant restorative dental treatments in patients with traumatic root fractures in the anterior region has great potential as it helps to maintain the emergence profile of the natural dentition and esthetics.

CLINICAL SIGNIFICANCE

Optimal esthetic outcomes are challenging in implant dentistry regarding soft tissue structure and morphology factors. Using natural teeth from surgery to deliver the final restoration might be beneficial when an anterior tooth is lost due to trauma.

Clinical outcomes of single full-coverage lithium disilicate restorations: A systematic review

Introduction

Lithium disilicate glass-ceramic (LDC) restorations exhibit microorganism infiltration, recurrent caries, pulpal lesions, periodontal inflammation, and cement exposure to the oral environment over time. All these factors lead to restoration failure. This systematic review aimed to investigate the clinical outcomes of LDC full-coverage crowns (FCC) in permanent teeth compared with those of other full-coverage restoration materials.

Materials & Methods

Search strategies were developed for four databases: Web of Science, OVID, PubMed, and Scopus. Data extraction and quality appraisals were performed by two independent reviewers. Data on the presence of caries, post-operative sensitivity, and periodontal changes were extracted from the included clinical studies. In addition to the outcome measures, data on the sample size, study groups, method of restoration fabrication, type of impression, and type of abutment were recorded.

Results

We retrieved 3989 records for the title and abstract screening. Of these, 19 clinical studies met the inclusion criteria. The overall quality of the included studies indicates a low risk of bias. Most studies reported no pulpal involvement, recurrent caries, or post-operative sensitivity and presented a favorable periodontal response after the cementation of LDC-FCC during different follow-up periods.

Conclusion

Based on the endodontic and periodontic clinical responses of natural tooth abutments and their supporting periodontium, LDC-FCC can be considered a clinically successful restorative option.

Toxicological Risks of the Cobalt-Chromium Alloys in Dentistry: A Systematic Review

Background: The toxicological risk of Co-Cr dental alloys is actually a sensitive subject with the European regulatory changes, namely regulation (EU) 2017/745 and annex VI to the CLP regulation (EC) 1972/2008. Objectives: The objective of this review is to conduct a rigorous analysis of the cytocompatibility of cobalt-chromium (Co-Cr) dental alloys. Considering various parameters such as cytotoxicity, type IV hypersensitivity reaction, sensitization, and irritation, we investigated evidence of toxicity of Co-Cr in human dental applications. Data sources: Specific search strategies were performed in three electronic databases, namely Medline, Embase, and Web of Science, using a main restriction in the search regarding the publication date (1995-2022). Study selection: Out of a total of 836 articles, only 21 studies were selected and analyzed according to PRISMA methodology. Results: Among them, 10 in vitro studies using human samples and 11 in vivo studies on human patients were distinguished. Most of the in vitro studies confirmed that Co-Cr alloys have a good cytocompatibility compared to Ni alloys. Regarding the in vivo studies, it appeared that Co-Cr could rarely cause sensitization, irritation, and allergic reactions. Reactions were mainly observed for people allergic to Co or Cr. Nevertheless, titanium-based materials showed better results. Conclusions: This study proposes a new state of the art on Co-Cr dental alloys and will thus be very useful for carrying out additional studies. Relevance: This review will help practitioners in their daily clinical choice.

Bonding of Clear Aligner Composite Attachments to Ceramic Materials: An In Vitro Study

Background: We aim to evaluate the effect of surface conditioning, bonding agents and composite types on surface roughness (SR) and shear bond strength (SBS) of clear aligner composite attachments bonded to ceramics. Methods: One hundred and eighty IPS e.max CAD specimens were prepared. For SR, 60 specimens were divided according to surface conditioning (n = 15) into four groups: control, 9.6% hydrofluoric acid (HFA), 37% phosphoric acid (PhA), air abrasion (AA). SR was measured using a Profilometer and Atomic Force Microscopy. For SBS, 120 specimens were divided according to conditioning methods (n = 40) (9.6% HFA and 37% PhA or AA), then according to bonding agents (n = 20) (Assure universal bond (AUB) or Single bond universal (SBU)) and then according to composite type (n = 10): Filtek™ Z350 and Filtek™ Z350 XT flowable composite. SBS was measured using Instron testing machine. Descriptive and group comparison were calculated (p < 0.05). Results: AA had the highest SR, while the control had the lowest SR (p < 0.05). HFA had the highest, but insignificant SBS, followed by AA (p > 0.05). AUB had higher SBS than SBU (p < 0.001). Filtek™ Z350 produced higher SBS than Filtek™ Z350 XT flowable composite (p < 0.01). Conclusion: The combination of AA, AUB, and Filtek Z350 produced the highest SBS, followed by HFA, AUB, and Filtek Z350.

Clinical Evaluation of CAD/CAM Ceramic Endocrown Versus Prefabricated Zirconia Crown in the Restoration of Pulpotomized Primary Molars: A Two-Year Spilt-Mouth Randomized Controlled Trial

Objectives  The current trial aimed to compare lithium disilicate (LS2) endocrowns' clinical performance, gingival health, and parental satisfaction to those of prefabricated zirconia crowns (ZCs) over a 24-month of follow-up.

Materials and Methods  This study designed as a spilt-mouth randomized controlled trial. A total of 88 pulpotomized mandibular second primary molars of 44 children were assigned into two equal groups. Forty-four molars were restored with prefabricated primary ZCs (control group) and the same number were restored with LS2 endocrown (intervention group). Clinical performance and gingival status were evaluated using a modified United States Public Health Service criterion, and plaque and gingival indices. Parental satisfaction was assessed using a 5-point Likert-scale questionnaire.

Statistical Analysis  Paired data were analyzed using McNemar's test, a statistical test used on paired nominal data, and paired t -tests. The significance level was set to 5% at 95% confidence interval.

Results  Both restorations showed comparable gingival health status over the follow-ups. Marginal adaptation of the endocrowns and ZCs at the end of follow-up was 95.5 and 90.9%, respectively ( p  = 0.68). For marginal integrity and discoloration, both restorations showed similar results at the follow-ups. The overall parental satisfaction of both groups was statistically insignificant ( p  = 0.07). However, parents were more satisfied with the endocrown color over that of the ZC ( p  < 0.05).

Conclusion  Endocrowns' clinical performance and gingival health were comparable to those of ZCs. For both restorations, parental satisfaction was nearly similar except for the color that showed an advantage in favor of the endocrowns.

In vitro biocompatibility testing of different base materials used for elevation of proximal subgingival margins using human gingival epithelial cells

PURPOSE

To analyze the biological effects of four base materials used for elevation of proximal subgingival margins on gingival epithelial cells.

METHODS

Twenty-eight specimens for each of the four base materials (total 112 specimens) were used: resin-modified glass ionomer (RMGI), glass hybrid (HV-GIC), flowable bulk fill resin composite (Bulk Flow) and bioactive ionic resin (Activa). Proximal enamel and root dentin were used as controls. Gingival epithelial cell viability was calculated after direct incubation on all four types of material for either 24 h or 72 h using both the methyl tetrazolium and trypan blue dye exclusion assays. Data were analyzed statistically using one-way analysis of variance, Tukey post hoc test and independent sample t-test (P < 0.05).

RESULTS

Cell viability values in both assays showed significant differences among the study groups. Bulk Flow showed the highest values, followed in order by Activa and the control groups. Both HV-GIC and RMGI had the lowest values. Cell viability in all of the study groups was higher after incubation for 72 h than after 24 h.

CONCLUSION

In terms of biocompatibility with epithelial tissues, bulk fill resin composite appears to be most suitable, followed by bioactive composite, for subgingival placement than glass ionomer-based materials, especially that containing 2-hydroxy-ethyl methacrylate.

Comparative analysis of the surface properties and corrosion resistance of Co-Cr dental alloys fabricated by different methods

STATEMENT OF PROBLEMS

The complex oral environment leads to the corrosion of dental alloy materials and the release of metal ions that may have a negative impact on health. Digital manufacturing is increasingly being used in dentistry, but whether digitally manufactured prostheses have better resistance to corrosion than traditional cast prostheses is unclear.

PURPOSE

The purpose of this in vitro study was to determine the surface properties and corrosion resistance of dental cobalt-chromium (Co-Cr) alloys fabricated by lost-wax casting (CAST), selective laser melting (SLM), and computer numerical control milling (CNC).

MATERIAL AND METHODS

The surface characteristics of the specimens were analyzed via scanning electron microscopy and energy-dispersive spectroscopy (SEM-EDS), metallurgical observation, and X-ray diffraction (XRD). For corrosion resistance, the specimens were immersed in artificial saliva at a pH 2.3 and 6.8 for 1, 4, and 7 weeks. Then, inductively coupled plasma-mass spectrometry (ICP-MS) was used to detect the main metal ion. Electrochemical impedance spectroscopy (EIS) was conducted based on a 3-electrode system to assess the electrochemical corrosion resistance. An ANOVA test was used to evaluate statistically significant differences among the groups (α=.05).

RESULTS

The SLM and CNC specimens showed more homogenous microstructures, less ion release at different times and pH, and more charge transfer resistance than CAST specimens.

CONCLUSIONS

Compared with casting, SLM-printing and CNC-milling have advantages in terms of surface properties and corrosion resistance.

Application of Texture and Fractal Dimension Analysis to Evaluate Subgingival Cement Surfaces in Terms of Biocompatibility

Biocompatibility is defined as “the ability of a biomaterial, prosthesis, or medical device to perform with an appropriate host response in a specific application”. Biocompatibility is especially important for restorative dentists as they use materials that remain in close contact with living tissues for a long time. The research material involves six types of cement used frequently in the subgingival region: Ketac Fil Plus (3M ESPE, Germany), Riva Self Cure (SDI, Australia) (Glass Ionomer Cements), Breeze (Pentron Clinical, USA) (Resin-based Cement), Adhesor Carbofine (Pentron, Czech Republic), Harvard Polycarboxylat Cement (Harvard Dental, Great Britain) (Zinc polycarboxylate types of cement) and Agatos S (Chema-Elektromet, Poland) (Zinc Phosphate Cement). Texture and fractal dimension analysis was applied. An evaluation of cytotoxicity and cell adhesion was carried out. The fractal dimension of Breeze (Pentron Clinical, USA) differed in each of the tested types of cement. Adhesor Carbofine (Pentron, Czech Republic) cytotoxicity was rated 4 on a 0–4 scale. The Ketac Fil Plus (3M ESPE, Germany) and Riva Self Cure (SDI, Australia) cements showed the most favorable conditions for the adhesion of fibroblasts, despite statistically significant differences in the fractal dimension of their surfaces.

The apoptotic and autophagic effects of cast Au-Pt, and differently manufactured Co-Cr and cp-Ti on three-dimensional oral mucosal model

The application of digitally manufactured dental metals has aroused the attention on their biocompatibilities. Three-dimensional oral mucosal model (3D OMM) would provide excellent assessments to the biocompatibility. In the current study, we set to measure metal ion release levels in the extracts of cast gold-platinum alloy (Au-Pt), differently manufactured cobalt-chromium alloy (Co-Cr) and commercially pure titanium (cp-Ti). We further tested two scaffold materials of 3D OMM to determine the better one for the succedent work. Lastly, we evaluated the apoptotic and autophagic effects of cast Au-Pt, and differently manufactured Co-Cr and cp-Ti on mucosal cells based on 3D OMM. We found that, in the construction of 3D OMM, Matrigel showed better performance than bovine acellular dermal matrix. Thus, Matrigel was chosen to construct the 3D OMM in the succedent studies. The results of ion release and biological assessments showed that, firstly, cast Au-Pt and cp-Ti triggered less early apoptotic cells and ion release than cast Co-Cr, implying better chemical stability and biocompatibility of them; secondly, digitally manufactured (including CAD/CAM milling and SLM) Co-Cr showed significantly lower ion release levels and lesser early apoptotic effects on 3D OMM as compared to the cast one. Although cast cp-Ti released much more ions than CAD/CAM milling one, manufacturing methods had no impact on apoptotic effect of cp-Ti. Therefore, we believe that digital methods possess same or even better chemical stability and biocompatibility than conventional casting one. Thirdly, although increased autophagic levels are observed in all test groups, so far there is no evidence that the test metals trigger different levels of autophagy as compared to each other. In addition, correlation analysis indicates that Co, W, and Mn appear to be the potential inducements for the apoptotic and autophagic effects of Co-Cr.

Cobalt-chromium alloys fabricated with four different techniques: Ion release, toxicity of released elements and surface roughness

OBJECTIVE

To investigate the metal ion release, surface roughness and cytoxicity for Co-Cr alloys produced by different manufacturing techniques before and after heat treatment. In addition, to evaluate if the combination of materials affects the ion release.

METHODS

Five Co-Cr alloys were included, based on four manufacturing techniques. Commercially pure titanium, CpTi grade 4 and a titanium alloy were included for comparison. The ion release tests involved both Inductive Coupled Plasma Optical Emission Spectrometry and Inductive Coupled Plasma Mass Spectrometry analyses. The surface analysis was conducted with optical interferometry. Cells were indirectly exposed to the materials and cell viability was evaluated with the MTT (3-(4.5-dimethylthiazol-2-yl)-2.5-diphenyltetrazolium bromide) method.

RESULTS

All alloys showed a decrease of the total ion release when CpTi grade 4 was present. The total ion release decreased over time for all specimens and the highest ion release was observed from the cast and milled Co-Cr alloy in acidic conditions. The cast and laser-melted Co-Cr alloy and the titanium alloy became rougher after heat treatment. All materials were within the limits of cell viability according to standards.

SIGNIFICANCE

The ion release from Co-Cr alloys is influenced by the combination of materials, pH and time. Surface roughness is influenced by heat treatment. Furthermore, both ion release and surface roughness are influenced by the manufacturing technique and the alloy type. The clinical implication needs to be further investigated.

Effect of core materials for core fabrication for dental implants on in-vitro cytocompatibility of MC3T3-E1 cells

Background

Despite the wide use of dental materials for CAD/CAM system in prosthetic treatment, the effect of the materials, which are used as dental implants core fabricated, on cells involved in dental implant osseointegration is uncertain. This study aimed to investigate and compare the effect of single core materials used for dental implants fabricated by the dental prostheses fabrication process and the CAD/CAM milling method on MC3T3-E1 cells.

Methods

The materials used for prostheses restoration in this experiment were Porcelain Fused Gold (P.F.G), Lithium disilicate glass ceramic (LiSi₂), Zirconia (ZrO₂), Nickel-Chromium (Ni-Cr) and Cobalt-Chromium (Co-Cr). MC3T3-E1 cells were cultured and used, the cell adhesion and morphology were observed and analyzed using confocal laser scanning microscopy (CLSM). Methoxyphenyl tetrazolium salt (MTS) and alkaline phosphatase (ALP) assay were used to observe the cell proliferation and differentiation.

Results

CLSM revealed irregular cell adhesion and morphology and the filopodia did not spread in the Ni-Cr specimen group. Significantly high cell proliferation was observed in the ZrO₂ specimen group. The LiSi₂ specimen group presented significantly high cell differentiation. Intergroup comparison of cell proliferation and differentiation between the Ni-Cr specimen group and all other specimen groups showed significant differences (p < .05).

Conclusion

Cell proliferation and differentiation were observed from the cores, which were fabricated with all specimen groups on cytocompatibility except the Ni-Cr specimen group.

Biocompatibility of Polymer and Ceramic CAD/CAM Materials with Human Gingival Fibroblasts (HGFs)

Four polymer and ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials from different manufacturers (VITA CAD-Temp (polymethyl methacrylate, PMMA), Celtra Duo (zirconia-reinforced lithium silicate ceramic, ZLS), IPS e.max CAD (lithium disilicate (LS₂)), and VITA YZ (yttrium-tetragonal zirconia polycrystal, Y-TZP)) were tested to evaluate the cytotoxic effects and collagen type I secretions on human gingival fibroblasts (HGFs). A total of 160 disc-shaped samples (Ø: 10 ± 2 mm; h: 2 mm) were milled from commercial blanks and blocks. Direct-contact cytotoxicity assays were evaluated at 24, 48, and 72 h, and collagen type I (COL1) secretions were analysed by cell-based ELISA at 24 and 72 h. Both experiments revealed statistically significant differences (p < 0.05). At 24 and 48 h of contact, cytotoxic potential was observed for all materials. Later, at 72 h, all groups reached biologically acceptable levels. LS₂ showed the best results regarding cell viability and collagen secretion in all of the time evaluations, while Y-TZP and ZLS revealed intermediate results, and PMMA exhibited the lowest values in both experiments. At 72 h, all groups showed sharp decreases in COL1 secretion regarding the 24-h values. According to the results obtained and the limitations of the present in vitro study, it may be concluded that the ceramic materials revealed a better cell response than the polymers. Nevertheless, further studies are needed to consolidate these findings and thus extrapolate the results into clinical practice.

Current status on lithium disilicate and zirconia: a narrative review

Background

The introduction of the new generation of particle-filled and high strength ceramics, hybrid composites and technopolymers in the last decade has offered an extensive palette of dental materials broadening the clinical indications in fixed prosthodontics, in the light of minimally invasive dentistry dictates. Moreover, last years have seen a dramatic increase in the patients’ demand for non-metallic materials, sometimes induced by metal-phobia or alleged allergies. Therefore, the attention of scientific research has been progressively focusing on such materials, particularly on lithium disilicate and zirconia, in order to shed light on properties, indications and limitations of the new protagonists of the prosthetic scene.

Methods

This article is aimed at providing a narrative review regarding the state-of-the-art in the field of these popular ceramic materials, as to their physical-chemical, mechanical and optical properties, as well as to the proper dental applications, by means of scientific literature analysis and with reference to the authors’ clinical experience.

Results

A huge amount of data, sometimes conflicting, is available today. Both in vitro and in vivo studies pointed out the outstanding peculiarities of lithium disilicate and zirconia: unparalleled optical and esthetic properties, together with high biocompatibility, high mechanical resistance, reduced thickness and favorable wear behavior have been increasingly orientating the clinicians’ choice toward such ceramics.

Conclusions

The noticeable properties and versatility make lithium disilicate and zirconia materials of choice for modern prosthetic dentistry, requiring high esthetic and mechanical performances combined with a minimal invasive approach, so that the utilization of such metal-free ceramics has become more and more widespread over time.

Evaluation of the biological behaviour of various dental implant abutment materials on attachment and viability of human gingival fibroblasts

OBJECTIVE

This study aimed to investigate the biological effects of yttria-stabilized zirconia (Y-TZP) compared to other dental implant abutment materials, i.e. lithium disilicate (LS2) and titanium alloy (Ti), as well as the effects of aging of Y-TZP on viability/proliferation and attachment properties of Human Gingival Fibroblasts (HGFs).

METHODS

Cylindrical specimens of each material were prepared as per manufacturer's instructions. Y-TZP specimens were divided into three groups: 1. no aging (Zr0), 2. aging for 5 h, 134 °C, 2 bars, 100% humidity (Zr5), 3. aging for 10 h under the same conditions (Zr10). Surface roughness was evaluated by optical profilometry; cell metabolic activity/viability by MTT assay, morphological changes by Scanning Electron Microscopy (SEM) and ratio of live/dead cells by confocal microscopy.

RESULTS

Results showed statistically significant reduction of HGF metabolic activity/viability in contact with Y-TZP after aging. Nevertheless, non-aged zirconia showed no significant differences compared with LS2, Ti and control cultures. In contrast, significant stimulation of cell metabolic activity/viability was observed in HGFs exposed to LS2 eluates. Differential morphological patterns were observed for HGF in contact with different materials/treatments, with obviously increased number of dead cells and sparser distribution of HGFs cultured on Zr10 specimens. These effects were not correlated with surface topography, since Y-TZP aging did not alter surface micro-roughness.

SIGNIFICANCE

These findings indicate that Y-TZP shows comparable biological properties to Ti and LS2 as implant abutment material. Nevertheless, Y-TZP aging might influence gingival cell attachment and proliferation properties, providing an alert to a potentially negative effect on the long-term maintenance of gingival architecture.

Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with Human Gingival Keratinocytes (HGKs)

OBJECTIVE

Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials, a new class of CAD-CAM composites, is poorly explored in the literature, in particular, no data are available regarding Human Gingival Keratinocytes (HGK). The first objective of this study was to evaluate the in vitro biocompatibility of PICNs with HGKs in comparison with other materials typically used for implant prostheses. The second objective was to correlate results with PICN monomer release and indirect cytotoxicity.

METHODS

HGK attachment, proliferation and spreading on PICN, grade V titanium (Ti), yttrium zirconia (Zi), lithium disilicate glass-ceramic (eM) and polytetrafluoroethylene (negative control) discs were evaluated using a specific insert-based culture system. For PICN and eM samples, monomer release in the culture medium was quantified by high performance liquid chromatography and indirect cytotoxicity tests were performed.

RESULTS

Ti and Zi exhibited the best results regarding HGK viability, number and coverage. eM showed inferior results while PICN showed statistically similar results to eM but also to Ti regarding cell number and to Ti and Zi regarding cell viability. No monomer release from PICN discs was found, nor indirect cytotoxicity, as for eM.

SIGNIFICANCE

The results confirmed the excellent behavior of Ti and Zi with gingival cells. Even if polymer based, PICN materials exhibited intermediate results between Ti-Zi and eM. These promising results could notably be explained by PICN high temperature-high pressure (HT-HP) innovative polymerization mode, as confirmed by the absence of monomer release and indirect cytotoxicity.

"Digitally Oriented Materials": Focus on Lithium Disilicate Ceramics

The present paper was aimed at reporting the state of the art about lithium disilicate ceramics. The physical, mechanical, and optical properties of this material were reviewed as well as the manufacturing processes, the results of in vitro and in vivo investigations related to survival and success rates over time, and hints for the clinical indications in the light of the latest literature data. Due to excellent optical properties, high mechanical resistance, restorative versatility, and different manufacturing techniques, lithium disilicate can be considered to date one of the most promising dental materials in Digital Dentistry.