The timing of significant arch dimensional changes with fixed orthodontic appliances: data from a multicenter randomised controlled trial

Comparative assessment of dental and basal arch dimensions of passive and active self-ligating versus conventional appliances : A randomized clinical trial

PURPOSE

In this parallel, three-arm, single-center randomized trial, the dental and basal arch dimensions after orthodontic treatment using conventional brackets and passive and active self-ligating (SL) brackets were compared.

METHODS

Patients needing comprehensive orthodontic treatment were randomly allocated to the active SL, passive SL, or conventional brackets (control) group. All patients were treated with a standardized arch wires sequence. Eligibility criteria included class I malocclusion in the permanent dentition, crowding (4-6 mm), and adequate oral hygiene. The primary outcome was intermolar width, based on cone beam computed tomography (CBCT) scans. Secondary outcomes were maxillary and mandibular widths in the canines and premolars regions, dental arch depth, buccolingual inclination, and alignment duration. Blinding of outcome assessment was implemented. Patients were followed every 4 weeks until insertion of the stainless steel 0.019 × 0.025 wire. Mean values were computed from CBCT sections, and data were analyzed using a one-way analysis of variance.

RESULTS

In all, 66 patients (ages 18-25 years) were randomized into a 1:1:1 ratio; 7 patients dropped out before treatment initiation. Examining dental arch dimensions in the canine and premolar regions showed that expansion of the maxillary dental arch was greatest in the passive SL brackets group, less in the active SL brackets group, and lowest in the control group (P < 0.01). Changes in maxillary intermolar width between the three groups were not significant, and changes in basal arch dimensions, depth of dental and basal arches, buccolingual inclination, and alignment duration were similar in the three groups.

CONCLUSIONS

Self-ligating brackets were not more effective than conventional brackets when examining intermolar width, basal transverse dimensions, depth of the arch, and alignment duration.

Characterization of facial asymmetry phenotypes in adult patients with skeletal Class III malocclusion using three-dimensional computed tomography and cluster analysis

Objective

To classify facial asymmetry (FA) phenotypes in adult patients with skeletal Class III (C-III) malocclusion.

Methods

A total of 120 C-III patients who underwent orthognathic surgery (OGS) and whose three-dimensional computed tomography images were taken one month prior to OGS were evaluated. Thirty hard tissue landmarks were identified. After measurement of 22 variables, including cant (°, mm), shift (mm), and yaw (°) of the maxilla, maxillary dentition (Max-dent), mandibular dentition, mandible, and mandibular border (Man-border) and differences in the frontal ramus angle (FRA, °) and ramus height (RH, mm), K-means cluster analysis was conducted using three variables (cant in the Max-dent [mm] and shift [mm] and yaw [°] in the Man-border). Statistical analyses were conducted to characterize the differences in the FA variables among the clusters.

Results

The FA phenotypes were classified into five types 1) non-asymmetry type (35.8%); 2) maxillary-cant type (14.2%; severe cant of the Max-dent, mild shift of the Man-border); 3) mandibular-shift and yaw type (16.7%; moderate shift and yaw of the Man-border, mild RH-difference); 4) complex type (9.2%; severe cant of the Max-dent, moderate cant, severe shift, and severe yaw of the Man-border, moderate differences in FRA and RH); and 5) maxillary reverse-cant type (24.2%; reverse-cant of the Max-dent). Strategic decompensation by pre-surgical orthodontic treatment and considerations for OGS planning were proposed according to the FA phenotypes.

Conclusions

This FA phenotype classification may be an effective tool for differential diagnosis and surgical planning for Class III patients with FA.

Comparative assessment of various cephalometric facial planes with intercanine width in orthodontic patients

OBJECTIVE:

The study was conducted to evaluate the relationship of various cephalometric skeletal patterns in the vertical and anteroposterior planes with intercanine width in untreated orthodontic patients.

METHOD AND MATERIAL:

This study included dental cast and cephalometric radiographs of 100 patients (69 females and 31 males) of the age range 13 to 33 years. Skeletal parameters including SNA, SNB, SNMP angles were found from lateral cephalometric radiographs. Intercanine widths including upper intercanine widths (UICW) and lower intercanine widths (LICW) were measured by a digital caliper.

RESULTS:

The correlation of intercanine width with SNA, SNB, and SNMP angles was analyzed by applying Pearson correlation coefficient. According to statistical analysis, the only insignificant correlation was analyzed between UICW with SNB and LICW with SN-MP.

CONCLUSIONS:

The overall result showed statistically significant relationship of various cephalometric skeletal patterns in the sagittal and vertical planes with intercanine width.

Clinical effects with customized brackets and CAD/CAM technology: a prospective controlled study

OBJECTIVE

Nowadays, CAD/CAM technologies enrich orthodontics in several ways. While they are commonly used for diagnoses and treatment planning, they can also be applied to create individualized bracket systems. The purpose of this prospective quasi-randomized study was to evaluate the clinical efficiency of a customized bracket system and its comparison with directly bonded conventional self-ligating bracket treatment.

MATERIALS AND METHODS

Altogether 38 patients were separated into two groups, treated either with direct bonded self-ligating brackets (Damon, Ormco, USA) or with indirect bonded customized CAD/CAM brackets (Insignia™, Ormco, USA). Overall treatment time, number of treatment appointments, number of lost or repositioned brackets, number of arch wires and wire bends, Little Irregularity Index, cephalometric analyses and ABO scores were compared. Superimpositions of the virtual set-ups and the treatment results of the CAD/CAM group were performed to evaluate the clinical realization of the treatment planning.

RESULTS

No differences between both treatment groups were found concerning overall treatment time, number of appointments and number of archwire bends. Bonding failures occurred more often using the CAD/CAM system. Indirectly bonded brackets did not have to be repositioned as often as directly bonded brackets. Treatment results with both systems were similar concerning their effects on the reduction of ABO scores. The number of used archwires was higher in the CAD/CAM group. Treatment with both systems led to further proclination of the incisors. Proclination in the lower jaw was greater than proclination in the upper jaw, and there was a statistically significant difference between the two treatment systems. Comparing the treatment results with the virtual set-ups, mesial positions were met best, followed by vertical positions. Transversal positions showed the greatest discrepancies. Concerning angles, values of angulation showed greatest accordance to the virtual set-up, while values of inclinations showed greatest discrepancies.

CONCLUSION

In comparison with a direct bonded self-ligating bracket system the use of indirect bonded customized CAD/CAM brackets showed only minor influence on treatment efficiency and treatment outcomes. Transversal expansion, deep bite correction, expression of torque and anchorage loss remain challenges in the treatment with straight-wire appliances. Trial registration DRKS, DRKS00024350. Registered 15 February 2021, https://www.drks.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL_ID=DRKS00024350 .

Changes in the gingival thickness and keratinized gingival width of maxillary and mandibular anterior teeth after orthodontic treatment

OBJECTIVES

To evaluate changes in the gingival thickness (GT) and keratinized gingival width (KGW) of the maxillary and mandibular central and lateral incisors and canines after fixed orthodontic treatment and their association with sagittal tooth movement (STM).

MATERIALS AND METHODS

In this study of both arches, 60 periodontally healthy subjects who had completed fixed orthodontic treatment were included. Using pretreatment and posttreatment lateral cephalograms, STM of the maxillary (1-NA angle and distance, and 1-SN angle) and mandibular (1-NB angle and distance, and IMPA angle) incisors were evaluated to divide the subjects into protrusion and retrusion groups. Pretreatment and posttreatment GT was identified via transgingival probing, and KGW was calculated from the free gingival margin to the mucogingival junction.

RESULTS

The intragroup pretreatment and posttreatment comparison results showed a significant decrease in the GT of the maxillary and mandibular anterior teeth in the protrusion and retrusion groups and a decrease in the KGW of the maxillary lateral incisors in the protrusion group. Pearson correlation coefficient analyses for maxillary and mandibular anterior teeth revealed that the GT changes were not significantly associated with STM. However, a positive correlation existed between the KGW of tooth numbers 13 and 41 and STM.

CONCLUSIONS

STM was not significantly associated with decreased GT of the maxillary and mandibular anterior teeth, but it was positively correlated with the KGW of tooth numbers 13 and 41.

Accelerated orthodontics: Getting ahead of ourselves?

There is disagreement as to what constitutes an acceptable duration for orthodontic treatment but seeming unanimity that acceleration is required. This contention has spawned a range of surgical and non-surgical adjuncts designed to accelerate orthodontic tooth movement, geared at reducing overall treatment times while maintaining optimal occlusal results. Largely, however, marketed non-surgical adjuncts and involved surgical procedures have shown equivocal effectiveness in reducing treatment times. Notwithstanding this, a range of key treatment decisions and approaches may have a more potent effect. While external solutions may offer alluring possibilities, perhaps, more mundane realities including refinement of orthodontic planning and decision-making with efficiency and process, as well as final outcome, in mind continue to offer the most accessible and influential means of improving orthodontic efficiency?

Dental and skeletal changes associated with the Damon system philosophical approach

OBJECTIVE

To compare the skeletal and dentoalveolar changes produced by the Damon system's treatment philosophy to traditional orthodontic treatment techniques.

MATERIALS AND METHODS

An electronic search in four major databases was completed: Cochrane, PubMed, EMBASE, and Google Beta Scholar on October 5th, 2018. Randomized controlled trials, prospective and retrospective controlled clinical trials were included in this systematic review. The quality assessment of individual studies was done using two different tools: The Cochrane Risk of Bias Assessment Tool (RTCs) and The Methodological Index for Non-Randomized Studies (MINORS) (non-RCTs).

RESULTS

Seven studies were included for this qualitative analysis. Six studies compared the Damon system to various types of conventional (non self-ligating bracket) system as a comparison group. One study used a quad helix as a comparison for a few months before a full bonding appointment with conventional brackets. The majority of studies found an increase in maxillary inter-canine, inter-premolar, and intermolar distance after the treatment in both the Damon and comparison groups. Yet, all studies concluded that there is no significant difference in the final transverse dimension between the two groups. One study also found that the transverse expansion was achieved mainly by tipping movement of posterior dentition, and a decrease in the posterior buccal bone area was evident in both groups after treatment.

CONCLUSION

There is not enough evidence to support the claim that the Damon system allows additional arch expansion with better tipping control than with traditional techniques.

Stability comparison of two different dentoalveolar expansion treatment protocols

OBJECTIVE

The aim of this study was to compare the longitudinal stability of the conventional straight-wire system after the use of a quad-helix appliance with Damon self-ligating system in patients with Class I malocclusion.

METHODS

27 adolescent patients were evaluated at three different periods: pre-treatment (T1), post-treatment (T2) and three years post-treatment (T3). Group 1 included 12 patients (with a mean age of 14.65 year) treated with Damon 3MX bracket system; and Group 2 included 15 patients (with a mean age of 14.8 year) who underwent orthodontic treatment with Roth prescribed brackets after expansion with Quad-Helix appliance. Relapse was evaluated with dental cast examination and cephalometric radiograph tracings. Statistical analysis was performed with IBM-SPSS for Windows software, version 21 (SPSS Inc., Chicago, IL). A p-value smaller than 0.05 was considered statistically significant.

RESULTS

There were significant increases in all transverse dental and postero-anterior measurements (except for UL6-ML mm in Group 1) with active treatment. There was some significant relapse in the long-term in inter-canine width in both groups and in the inter-first premolar width in Group 2 (p< 0.05). Significant decrease in all frontal measurements from T2 to T3 was seen for both groups. Upper and lower incisors significantly proclined in T1-T2 (p< 0.05), however no relapse was found for both groups. When two systems were compared, there was no significant difference for the long-term follow-up period.

CONCLUSION

Conventional (quad-helix appliance with conventional brackets) and Damon systems were found similar with regard to the long-term incisor positions and transverse dimension changes of maxillary arch.

Early vertical correction of the deep curve of Spee

Even though few technological advancements have occurred in Orthodontics recently, the search for more efficient treatments continues. This paper analyses how to accelerate and improve one of the most arduous phases of orthodontic treatment, i.e., correction of the curve of Spee. The leveling of a deep curve of Spee can happen simultaneously with the alignment phase through a method called Early Vertical Correction (EVC). This technique uses two cantilevers affixed to the initial flexible archwire. This paper describes the force system produced by EVC and how to control its side effects. The EVC can reduce treatment time in malocclusions with deep curves of Spee, by combining two phases of the therapy, which clinicians ordinarily pursue sequentially.

Maxillary expansion in an animal model with light, continuous force

OBJECTIVES

Maxillary constriction is routinely addressed with rapid maxillary expansion (RME). However, the heavy forces delivered by most RME appliances to expand the palate may lead to deleterious effects on the teeth and supporting tissues. The objective of this study was to explore a more physiologic maxillary expansion with light continuous force.

MATERIALS AND METHODS

Twenty 6-week-old Sprague-Dawley rats were equally divided into experimental (EXPT) and control (CTRL) groups. A custom-fabricated archwire expansion appliance made from 0.014-inch copper-nickel-titanium wire was activated 5 mm and bonded to the maxillary molar segments of animals in the EXPT group for 21 days. The force applied to each maxillary segment was 5 cN. Microfocus x-ray computed tomography and histological analyses were used to compare the tooth movement and bone morphology in the midpalatal suture and buccal aspect of the alveolar process between the EXPT and CTRL groups. Descriptive statistics (mean ± standard error of the mean) and nonparametric statistical tests were used to compare the outcomes across groups.

RESULTS

Compared to the CTRL group, there was a statistically significant increase in buccal tooth movement and expansion of the midpalatal suture in the EXPT group. There was no difference in the bone morphologic parameters between groups. The mineral apposition rate was increased on the buccal surface of the alveolar process in the EXPT group.

CONCLUSIONS

Application of light, continuous force resulted in maxillary osseous expansion due to bilateral sutural apposition and buccal drift of the alveolar processes. This animal experiment provides a more physiologic basis for maxillary expansion.

Therapeutic efficacy of self-ligating brackets: A systematic review

INTRODUCTION

Over the last few years, the use of self-ligating brackets in orthodontics has progressed considerably. These systems have been the subject of numerous studies with good levels of evidence making it possible to evaluate their efficacy and efficiency compared to conventional brackets. The aim of this study was to evaluate the therapeutic efficacy of self-ligating brackets by means of a systematic review of the scientific literature.

MATERIALS AND METHODS

A systematic study was undertaken in the form of a recent search of the electronic Pubmed database, oriented by the use of several keywords combined by Boolean operators relating to the therapeutic efficacy of self-ligating brackets through the study of tooth alignment, space closure, expansion, treatment duration and degree of discomfort. The search was limited to randomized controlled studies, and two independent readers identified studies corresponding to the selection criteria.

RESULTS AND DISCUSSION

The chosen articles comprised 20 randomized controlled trials. The studies analyzed revealed the absence of significant differences between the two types of system on the basis of the clinical criteria adopted, thereby refuting the hypothesis of the superiority of self-ligating brackets over conventional systems.

Microimplant-assisted rapid palatal expansion appliance to orthopedically correct transverse maxillary deficiency in an adult

This case report describes the use of a microimplant-assisted rapid palatal expansion (MARPE) appliance to orthopedically correct a transverse maxillary deficiency in an adult patient. Expansion forces transmitted through the teeth in traditional rapid palatal expansion appliances create unwanted dental effects rather than true skeletal expansion, particularly in older patients with more rigid interdigitation of the midpalatal suture. This 19-year-old patient had maxillary constriction with a unilateral posterior crossbite. A MARPE appliance secured to the palatal bones with 4 microimplants was expanded by 10 mm. Pre-MARPE and post-MARPE cone-beam computed tomography cross sections demonstrated 4 to 6 mm of expansion of the maxillofacial structures, including the zygoma and nasal bone area, and widening of the circummaxillary sutures. Minor buccal tipping of the dentition was observed, but the integrity of the alveolar bone was preserved. This report demonstrates that careful design and application of the MARPE appliance can achieve successful transverse expansion of the maxilla and the surrounding structures in a patient beyond the age typically considered acceptable for traditional rapid palatal expansion.