Remineralizing efficacy of different calcium-phosphate and fluoride based delivery vehicles on artificial caries like enamel lesions

Inhibition of incipient caries lesion progression by different fluoridated varnishes

The aim of this in vitro study was to evaluate the potential of different fluoridated varnishes to inhibit the progression of incipient caries lesions after cariogenic challenge. Seventy-five enamel specimens of bovine teeth were prepared and selected based on the initial surface microhardness (SMH). The specimens were first subjected to artificial demineralization (in buffer solution) after which SMH was re-analyzed (SM1). They were then randomly assigned to five experimental groups: 1- CONTROL (pH cycling), 2 - MI VAR (MI Varnish with RECALDENTTM - CPP-ACP), 3 - PROFL (Profluorid®), 4 - CLIN (ClinproTM White Varnish with TCP), and 5 - DUR (Duraphat®) (n=15). The varnishes were applied in a thin layer and the specimens were then subjected to pH cycling for eight days. The SMH and cross-sectional microhardness (CSMH) were then analyzed (SM2). The fluoride and calcium ion concentrations in the solution were analyzed by the indirect method and atomic absorption spectrophotometry, respectively. Data were statistically analyzed by Student's t-test, ANOVA/Tukey-Kramer, or Kruskall-Wallis/Dunn tests for individual comparisons (p˂0.05). All varnishes led to significantly higher surface and subsurface remineralization compared with the control group but did not differ from each other. The varnishes with the highest fluoride release were: PROFL and CLIN, followed by MI VAR and DUR. The varnishes with significantly higher release of calcium were: DUR, CLIN, and PROFL. In conclusion, all commercial fluoridated varnishes tested have good potential to inhibit the progression of demineralization, regardless of the ion release mechanisms.

Remineralization effect of NaF, NaF with TCP, NaF with CPP-ACP and NaF with CXP varnishes on newly erupted first permanent molars: A randomized controlled trial

INTRODUCTION

The aim of this study was to evaluate the remineralization effect of NaF, NaF with TCP, NaF with CPP-ACP and NaF with CXP varnishes on newly erupted first permanent molars using laser fluorescence (LF) method. The study was a randomized, double-blind, controlled trial with four parallel groups.

METHODS

The study was carried out in 48 high caries-risk children (DMFS >8), aged 6-7 years with newly erupted permanent first molars (initial lesion with 13 < LF value<30). A total of 140 teeth were divided randomly into four groups (n = 35): G1.Duraphat Varnish containing 5% NaF, G2. Clinpro™ White Varnish containing 5% NaF with TCP, G3.Embrace™ Varnish containing 5% NaF with CXP, G4. MI Varnish containing 5% NaF with CPP-ACP. All dental treatments of the patients were completed before the varnish application. The varnishes were applied to the targeted teeth at baseline, 1 and 3 months. Patients were called for follow-up appointments at 1, 3 and 6 months, and LF scanning was used to monitor mineralization changes. Data were analysed statistically by Wilcoxon signed-rank and Mann-Whitney U-tests.

RESULTS

In total, 40 children (122 teeth) completed the trial. At the end of 6 months, the amount of reduction in LF values (indicating remineralization) are as follows: NaF with CXP(6.87 ± 4.32) < NaF with TCP(7.36 ± 7.05) < NaF(7.40 ± 7.03) < NaF with CPP-ACP(8.33 ± 4.90). All of the varnishes resulted in significant decrease in LF measurements and there was no significant difference between control (NaF alone) group and other groups. Only MI varnish had a significantly greater remineralization effect than Embrace™ Varnish (p < 0.05).

CONCLUSION

As a non-invasive approach, CPP-ACP, TCP and CXP containing NaF varnishes have the potential to remineralize initial caries lesions on permanent first molars in high caries-risk children.

Enamel Evaluation after Debonding of Fixed Retention and Polishing Treatment with Three Different Methods

Lack of standardization of the retention phase has led to many studies of stability of movements and characteristic of retainers, disregarding the enamel repercussions of fixed retention on this phase. This study aimed to analyze different methods of enamel polishing after detachment of orthodontic retainers. Forty-five healthy premolars were divided into three groups according to the polishing bur after debonding, and four specimens without intervention were used as control. A 0.038 × 0.015 inches gold chain was bonded between the premolars and then removed. The adhesive remnant was removed with three types of burs according to the study groups (Group 1: white stone at high speed; Group 2: high-speed handpiece with a 30-blade tungsten carbide bur; Group 3: low-speed handpiece and a 30-blade tungsten bur). After debonding and polishing, all samples were analyzed with a confocal microscopy on surface roughness parameters: Sa: Arithmetic mean of the height of the surface. Rq: Square mean of the height of the surface and Sz: Maximum surface height. Mechanical tests were carried out to determine the bonding stress of the retention adhered to the teeth using an electromechanical testing machine. The adhesion stress was 8.23 MPa (±0.87). The quality of the refinement of the enamel after debonding is essential in order to preserve its integrity. The use of the 30-blade tungsten carbide bur provides a smooth enamel surface after polishing.

Comparative evaluation of prevention of demineralization of artificial enamel caries treated with two fluoride varnishes and 38% SDF in primary teeth: an in vitro study

BACKGROUND

This study aimed to compare the effect of Clinpro™ White varnish containing 5% sodium fluoride (NaF) and functionalized tricalcium phosphate, MI varnish containing 5% NaF and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and 38% Silver diamine fluoride (SDF) in preventing demineralization of treated white spot lesions (WSLs) in enamel of primary teeth.

METHODS

Forty-eight primary molars with artificial WSLs were allocated into four groups as follows: Group 1: Clinpro white varnish, Group 2: MI varnish, Group 3: SDF, and Group 4: control (no treatment). The three surface treatments were applied for 24 h and then enamel specimens were subjected to pH cycling. Thereafter, the mineral content of specimens was evaluated by Energy Dispersive X-ray Spectrometer and the lesion depth was assessed via Polarized Light Microscope. One-way ANOVA followed by Tukey's post hoc test were used at p ≤ 0.05 to identify significant differences.

RESULTS

Insignificant difference in mineral content was observed among treatment groups. Treatment groups exhibited significantly higher mineral content compared to control except for Fluoride (F). MI varnish showed the highest mean calcium (Ca) ion content (66.57 ± 0.63), and Ca/P (2.19 ± 0.11), followed by Clinpro white varnish, and SDF. MI varnish also displayed the highest phosphate (P) ion content (31.46 ± 0.56), followed by SDF (30.93 ± 1.02), and Clinpro white varnish (30.53 ± 2.19). Fluoride content was highest in SDF (0.93 ± 1.18), followed by MI (0.89 ± 0.34) and Clinpro (0.66 ± 0.68) varnishes. Significant difference in lesion depth was observed among all groups (p < 0.001). The lowest mean lesion depth (µm) was found in MI varnish (226.23 ± 44.25) which was significantly lower than Clinpro white varnish (285.43 ± 44.70), SDF (293.32 ± 46.82), and control (576.69 ± 42.66). Insignificant difference in lesion depth was found between SDF and Clinpro varnish.

CONCLUSIONS

In primary teeth, WSLs treated with MI varnish displayed better resistance to demineralization compared to WSLs treated with Clinpro white varnish and SDF.

Development of Root Caries Prevention by Nano-Hydroxyapatite Coating and Improvement of Dentin Acid Resistance

There is no established method for optimizing the use of dentin to prevent root caries, which are increasing in the elderly population. This study aimed to develop a new approach for root caries prevention by focusing on bioapatite (BioHap), a new biomaterial, combined with fluoride. Bovine dentin was used as a sample, and an acid challenge was performed in three groups: no fluoride (control group), acidulated phosphate fluoride treatment (APF group), and BioHap + APF treatment (BioHap group). After applying the new compound, the acid resistance of dentin was compared with that of APF alone. The BioHap group had fewer defects and an increased surface hardness than the APF group. The BioHap group had the smallest lesion depth and least mineral loss among all groups. Using a scanning electron microscope in the BioHap group showed the closure of dentinal tubules and a coating on the surface. The BioHap group maintained a coating and had higher acid resistance than the APF group. The coating prevents acid penetration, and the small particle size of BioHap and its excellent reactivity with fluoride are thought to have contributed to the improvement of acid resistance in dentin. Topical fluoride application using BioHap protects against root caries.

Nano-hydroxyapatite-induced remineralization of artificial white spot lesions after bleaching treatment with 10% carbamide peroxide

OBJECTIVE

To assessed in vitro the effect of nanohydroxyapatite (n-HA) to improve the aesthetic appearance and microhardness of white spot lesions (WSL) when associated with a low-concentration bleaching agent (carbamide peroxide-CP10%).

MATERIAL AND METHODS

Enamel/dentin specimens (n = 60) of 5 × 5 × 2.2 mm were prepared, of these, 48 were submitted to pH-cycling to create artificial WSL. Subsequently, these were allocated into five groups (n = 12): n-HA; n-HA + CP10%; CP10%; WSL control (WSL_C ); sound control (Sound). The color was assessed at baseline, pre-treatment, and post-treatment using a spectrophotometer, and the color (ΔE/ΔE₀₀ ) and whiteness index (ΔWID) alterations were determined. The enamel cross-sectional microhardness (CSMH) was evaluated (post-treatment) with a Knoop indenter, 25gf/5 s, 20-200 μm. The data was analyzed through generalized linear models (α = 5%).

RESULTS

ΔE and ΔE₀₀ were significantly higher for the bleached groups (n-HA + CP10% and CP10%), and the n-HA was higher than the WSL_C group (p < 0.05). ΔWID was significantly higher for the bleached groups (p < 0.05). The CSMH values were significantly higher in the sound group than in the n-HA, CP10%, and WSL_C groups (p < 0.05). The WSL_C had lower microhardness than the n-HA + CP10% and sound groups (p < 0.05).

CONCLUSION

n-HA is suitable to remineralize and recover the color of the WSL. However, its association with CP10% maintains the esthetical outcome while increasing its in-depth remineralizing effect.

CLINICAL SIGNIFICANCE

Considering the aesthetic and functional repercussions of the WSL persistence, treatments that tend to improve its physical appearance and reinforce its weakened substructure in a non-invasive way are ideal. For this associating low-concentration, bleaching agents to the remineralizing treatments is promising to treat this type of lesions.

Effect of sodium fluoride plus tricalcium phosphate with and without CO2 laser on remineralization of white spot lesions

Objectives

The aim of this in vitro study was to evaluate the effect of NaF plus TCP with and without CO₂ laser irradiation on management of demineralized enamel using microhardness test and digital microscopy.

Methods

Eighty intact extracted human premolar teeth were randomly divided into 4 groups (20/each). Each group was subjected to a demineralizing solution to create white spot lesion. Group 1 was treated with 3M Vanish™. Group 2 was irradiated with CO₂ laser. Group 3 was subjected to CO₂ laser followed by 3M Vanish™. Group 4 was treated by 3M Vanish™ then CO₂ laser. The teeth were immersed in artificial saliva. Surface microhardness was measured for each tooth before demineralization at base line (M1 as a control), after demineralization (M2) and after management (M3). Comparison of microhardness values between groups was performed using one way ANOVA test with significant level (0.05) followed by multiple comparisons post-hoc Tukey test between groups. Enamel surface was photographed by digital microscope.

Results

All intervention methods used in the current study significantly increased microhardness values of demineralized enamel (P < 0.001). Little improvement of enamel appearance was observed in all groups meanwhile using CO₂ laser on demineralized enamel directly led to signs of white and black dots affecting the appearance of enamel surface.

Significance

The most effective intervention regarding microhardness was group 2 followed by group 3, group 4 and group 1. Coating the enamel surface with 3M Vanish™ before CO₂ laser irradiation acted as a protective layer from the undesirable effects of laser on the teeth with increasing enamel microhardness values more than using Vanish alone. So the promising intervention method regarding both microhardness and appearance was group 4.

Effect of different surface treatments on the microhardness and colour change of artificial enamel lesions

BACKGROUND

To investigate the effect of three different surface treatments on the microhardness and colour change of artificial enamel lesions.

MATERIALS AND METHODS

One hundred bovine teeth were randomly assigned into four groups. Artificial enamel lesions were created using demineralizing solution for all groups except the sound enamel group. Different surface treatments were then performed G1: resin-infiltrant; G2: Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP); G3: artificial saliva; G4: Sound Enamel. Each group was subdivided into three subgroups, where each subgroup was subjected to a different testing method. Subgroup 1: surface microhardness; subgroup 2: cross-sectional microhardness; subgroup 3: colour measurement. Statistical analysis was performed by ANOVA, followed by Tukey's post hoc test.

RESULTS

Sound enamel group recorded the highest surface and cross-sectional microhardness results. No significant difference was found between the resin-infiltrant group and CPP-ACP regarding surface and cross-sectional microhardness at different lesion depths. Resin-infiltrant group showed the least colour change (∆E) results compared to the other groups.

CONCLUSION

Resin-infiltrant can effectively enhance surface microhardness and enamel resistance to demineralization, additionally, reduces the staining susceptibility of white spot lesions (WSLs) after treatment. CPP-ACP application for 4 weeks seems to improve surface microhardness; however, has a limited effect in resisting staining of WSLs after treatment. © 2022 Australian Dental Association.

Clinical effectiveness of resin-modified glass ionomer-based fluoride varnish for preventing occlusal caries lesions in partially erupted permanent molars: A randomised active-controlled trial

BACKGROUND

Deep pits and fissures in partially erupted permanent molars are vulnerable to dental caries.

AIM

To assess the clinical effectiveness of resin-modified glass ionomer-based fluoride varnish (RMGI-F varnish: Clinpro XT™ varnish) in preventing occlusal caries lesions in partially erupted permanent first molars.

DESIGN

In this randomised active-controlled superiority trial with a single-blind parallel design, 74 children with 182 partially erupted first permanent molars were allocated into two groups: Group 1: RMGI-F varnish; and Group 2: GI sealant (active control), with an application of 0.1% sodium fluoride varnish for all other teeth. The primary outcome was ICDAS score ≥1 at 12 months of follow-up. Data were analysed using adjusted Chi-square test and GEE regression for binary outcomes.

RESULTS

Group 1 (15.7%) and Group 2 (13.8%) did not differ significantly in ICDAS ≥1 scores at 12 months of follow-up (adjusted χ²  = 0.373, p = .541). There was no significant difference in retention between Group 1 (48.3%) and Group 2 (20.7%) at 12 months of follow-up (adjusted χ²  = 0.1, p = .752). Mean application time per tooth (16 ± 5.9 vs 20.2 ± 5.4 min) was significantly different (t = 5.26, p = .014).

CONCLUSIONS

RMGI-F varnish was not superior to GI sealant in preventing occlusal caries lesions in partially erupted molars.

Development of a hydroxyapatite nanoparticle-based gel for enamel remineralization -A physicochemical properties and cell viability assay analysis

Nano-hydroxyapatite (nHA) was synthesized from abalone mussel shells (Haliotis asinina) using a precipitation method, and gel HA-Abalone was developed using the carbomer materials with concentrations of 0, 10, 20, 30, and 40 wt%. The specimens used were 25 freshly extracted caries-free premolar teeth, and the treatment was done twice a day for 14 days. Gel HA-Abalone 20 wt%, with a crystallite size of 14.70±1.21 nm, was the best concentration to achieve the best remineralization (~863 VHN) of the superficial layer. Based on the results of cell viability assay on gel HA-Abalone 20 wt%, the growth of NIH/3T3 cells was inhibited beginning at a gel concentration of 1,000 µg/mL, and the half maximal inhibitory concentration (IC₅₀) value was 1,497 µg/mL. Based on to the one-way analysis of variance (ANOVA), the result reflected statistically significant differences in the average of the cell viability and enamel surface microhardness values (p<0.05).

Enamel demineralization model in primary teeth: Micro-CT and SEM assessments of artificial incipient lesion

Many studies have analyzed different tooth demineralization models, which generate artificial incipient lesions; however, most of them are complex, slow, not clear and results could not be employed in both primary and permanent teeth because of chemical content differences among them. This study evaluates a demineralization model on primary enamel, under three incubation periods; quantifying artificial incipient lesions formation, and depth by micro-CT, complementing with SEM for morphological characterization. Sixteen healthy human anterior primary teeth extracted for prolonged retention and orthopedic/orthodontic reasons were included in this study, previous informed consent. The sample was randomly assigned to four groups n = 4: G_Control, G_2D, G_4D, and G_7D. Micro-CT and SEM were performed during two stages: before demineralization (BD) and after demineralization (AD). A t-student test was carried out to determine differences among groups (p ≤ .05). No incipient lesions were observed in control group. Artificial lesion depth was similar among experimental groups; values were from 38.16 ± 05.40 μm to 42.61 ± 04.75 μm. An amount of 14 to 17 artificial incipient lesions were formed per group, the extension and distribution were different for each incubation period. Five erosive lesions were produced in G_7D. All experimental groups were able to form incipient artificial lesions in primary enamel. SEM characterization revealed more pronounced changes on the enamel surface, as the days of immersion in the demineralization solution increased. The 4-day incubation period is the most recommended for the demineralization model, due to the formation of incipient lesions only and its extension, which facilitates their assessment.

Analysis of permeability and biological properties of dentin treated with experimental bioactive glasses

OBJECTIVES

To evaluate obliterating capability and biological performance of desensitizing agents.

METHODS

50 dentin blocks were distributed according to the desensitizing agent used (n = 10): Control (Artificial saliva); Ultra EZ (Ultradent); Desensibilize Nano P (FGM); T5-OH Bioactive Glass (Experimental solution); F18 Bioactive Glass (Experimental solution). Desensitizing treatments were performed for 15 days. In addition, specimens were subjected to acid challenge to simulate oral environment demineralizing conditions. Samples were subjected to permeability analysis before and after desensitizing procedures and acid challenge. Cytotoxicity analysis was performed by using Alamar Blue assay and complemented by total protein quantification by Pierce Bicinchoninic Acid assay at 15 min, 24-h and 48-h time points. Scanning electron microscopy and energy dispersion X-ray spectroscopy were performed for qualitative analysis. Data of dentin permeability was analyzed by two-way repeated measures ANOVA and Tukey's test. For cytotoxicity, Kruskal-Wallis and Newman-Keuls tests.

RESULTS

for dentin permeability there was no significant difference among desensitizing agents after treatment, but control group presented highest values (0.131 ± 0.076 Lp). After acid challenge, control group maintained highest values (0.044 ± 0.014 Lp) with significant difference to other groups, except for Desensibilize Nano P (0.037 ± 0.019 Lp). For cytotoxicity, there were no significant differences among groups.

CONCLUSION

Bioglass-based desensitizers caused similar effects to commercially available products, regarding permeability and dentin biological properties.

CLINICAL SIGNIFICANCE

There is no gold standard protocol for dentin sensitivity. The study of novel desensitizing agents that can obliterate dentinal tubules in a faster-acting and long-lasting way may help meet this clinical need.

Fluoride Varnishes for Preventing Occlusal Dental Caries: A Review

Dental caries are most likely to occur on occlusal surfaces from the early eruptive stages of the tooth. In children, about 80% to 90% of dental caries are occlusal caries. Different preventive modalities are used to prevent occlusal caries. One of the methods used for occlusal caries prevention is fluoride varnish. A vast number of clinical trials have evaluated several types of sealant material and fluoride varnish to assess their ability to prevent occlusal caries in both primary and permanent dentition. The purpose of the current study was to provide an updated overview of the development, composition, mechanism of action, application, and safety of fluoride varnish, as well as its effect on occlusal caries prevention. This review of recently published studies on fluoride varnish and its effect on occlusal caries prevention shows that in children at moderate to high risk of caries, fluoride varnishes prevent occlusal caries. Both resin-based fissure sealants and fluoride varnish are effective for occlusal caries prevention for first-permanent molars. However, it was not possible to identify which one has the best effect. It is recommend that fluoride varnish is applied for children at high risk of caries two to four times per year.

Effectiveness of Self-assembling Peptide P11-4 Compared to Tricalcium Phosphate Fluoride Varnish in Remineralization of White Spot Lesions: A Clinical Randomized Trial

Background

Fluoride varnish with therapeutic tricalcium phosphate formulas such as Clinpro™ varnish has shown greater tendency in treating white spot lesions (WSLs) by inhibiting the progression of initial enamel lesions through the mineral exchange. The self-assembling peptide SAP₁₁-4 (Curodont Repair, CDR) works on a different scale in treating WSLs by mimicking the enamel matrix and aiming to guided enamel regeneration.

Aim

To quantitatively and qualitatively compare the effectiveness of the SAP₁₁-4 vs tricalcium posphate fluoride (TCPF) in remineralization of WSLs in young permanent teeth.

Materials and methods

Nine healthy patients were enrolled in this study. The trial was performed on 40 young permanent teeth in the initial demineralization stage. Teeth were randomly assigned to receive either TCPF (group I) or SAP₁₁-4 (group II). Lesions were assessed at pretreatment, 3, and 6 months posttreatment quantitatively per laser fluorescence DIAGNOdent pen and qualitatively through the International Caries Detection and Assessment System (ICDAS) II.

Results

The result of the current study revealed a significant quantitative and qualitative increase in remineralization of WSLs in both groups and over time intervals. However, the WSL recovery was significantly better in the self-assembling peptide group, reflecting an excellent remineralization potential of the WSLs by the SAP₁₁-4 compared to TCPF varnish.

Conclusion

Both TCPF and SAP₁₁-4 were effective in treating WSLs. However, the success of guided enamel regeneration by the SAP₁₁-4 through the biomineralization has proven superiority of this material compared to TCPF.

Clinical significance

Early detection of WSLs and minimal intervention through remineralizing agents can limit unnecessary tissue loss, further caries progression, and consequently prevent further harm to the patients.

How to cite this article

Kobeissi R, Badr SBY, Osman E. Effectiveness of Self-assembling Peptide P₁₁-4 Compared to Tricalcium Phosphate Fluoride Varnish in remineralization of White Spot Lesions: A Clinical Randomized Trial. Int J Clin Pediatr Dent 2020;13(5):451-456.

Influence of topical fluoride on shear bond strength of orthodontic brackets and enamel white spot lesions formation

Abstract Introduction Fluoride is considered a key element in the remineralization process of tooth enamel. Objective To evaluate the influence of a topical solution of sodium fluoride (NaF) on the shear bond strength of orthodontic brackets and white spot lesions formation. Material and method Sixty bovine teeth were divided into three groups (n=20). Group 1 (Control): shear bond strength; Group 2: shear bond strength after pH cycling; Group 3: shear bond strength after pH cycling and treatment with 0.04% NaF solution. Groups 2 and 3 underwent pH cycling with demineralizing (6hs) and remineralizing (17hs) solutions at pH of 4.3 and 7.0 respectively for 15 days. The specimens were submitted to the shear bond strength and the Adhesive Remnant Index was verified (ARI). The specimens of each group (n=3) were qualitatively analyzed by means of Scanning Electron Microscopy (SEM). Kruskal-Wallis test assessed the shear bond strength and Fisher's exact test evaluated ARI, with significance level of 5%. Result There was no significant difference among the three groups in shear bond strength (p=0.2679). Significant difference was found in ARI (p=0.0199). The frequency of ARI 1 was 55% in group 1, 90% in group 2, and 80% in group 3. SEM showed difference between the enamel and bonding. Group 2 showed structural change of the enamel surface, adjacent to the bond area; and group 3 showed enamel with characteristics similar to those of group 1. Conclusion It was concluded that there was no NaF influence on the bracket shear bond strength and even in low concentrations it prevented the development of areas of demineralization of white spot lesions.

Randomized Clinical Trial on Sodium Fluoride with Tricalcium Phosphate

This 24-mo randomized controlled trial was based on a double-blind parallel design, and it compared the effectiveness of 2 fluoride application protocols in arresting dentine caries in primary teeth. Three-year-old children with active dentine caries were recruited and randomly allocated to 2 treatment groups. Children in group A received a semiannual application of a 25% silver nitrate (AgNO₃) solution followed by a commercially available varnish with 5% sodium fluoride (NaF) on the carious tooth surfaces. Children in group B received a semiannual application of a 25% AgNO₃ solution followed by another commercially available varnish with 5% NaF containing functionalized tricalcium phosphate (fTCP). Carious tooth surfaces that were hard when probing were classified as arrested. Intention-to-treat analysis and a hierarchical generalized linear model were undertaken. A total of 408 children with 1,831 tooth surfaces with active dentine caries were recruited at baseline, and 356 children (87%) with 1,607 tooth surfaces (88%) were assessed after 24 mo. At the 24-mo evaluation, the mean (SD) number of arrested carious tooth surfaces per child were 1.8 (2.2) and 2.6 (3.3) for group A (without fTCP) and group B (with fTCP), respectively (P = 0.003). The arrest rates at the tooth surface level were 42% for group A and 57% for group B (P < 0.001). Results of the hierarchical generalized linear model indicated that protocol B (with fTCP) had a higher predicted probability (PP = 0.656) in arresting dentine caries than protocol A (without fTCP; PP = 0.500) when the carious lesions were on buccal/lingual surfaces, were on anterior teeth, had dental plaque coverage, and were in children from low-income families (P = 0.046). In conclusion, protocol B, which applied a 25% AgNO₃ solution followed by a commercially available 5% NaF varnish with fTCP semiannually, is more effective in arresting dentine caries in primary teeth as compared with protocol A, which applied a 25% AgNO₃ solution followed by another commercially available 5% NaF varnish without fTCP semiannually (ClinicalTrials.gov NCT03423797).

Effect of CPP-ACP on remineralization of artificial caries-like lesion: an in situ study

The purpose of this double-blind, randomized, crossover in situ study is to compare remineralization of preformed enamel lesions by casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) and fluoride dentifrice products. During each of four 10-day experimental legs, 10 participants wore intraoral removable palatal acrylic appliances with four human enamel slabs with preformed lesions. A 0.03-mL treatment paste was dripped extraorally onto the enamel blocks once a day for 3 min. The four randomly allocated treatments were as follows: CO- Control: silica dentifrice without fluoride; MP: MI Paste; MPP: MI Paste Plus and FD: Fluoride dentifrice - 1100 ppm F as NaF). Knoop surface hardness (SH) test was performed in three stages (T0 - sound enamel, T1 - after preformed lesion, and T2 - after treatment) and the cross-sectional hardness (CSH) test was performed after treatment using a 50-gram Knoop load for 15 s. Knoop hardness number (KHN) was similar between treatments. %SHr was significantly higher in the MP, FD, and MPP when compared to CO group (Kruskal-Wallis and Mann-Whitney tests, p < 0.05). Harder enamel was found in MP (75 μm) and FD groups at 75 to 175 μm. Treatment with DF, MP, and MPP promoted an increase of 20.27%, 19.24%, and 14.71%, respectively, in Integral Hardness Change (ΔIHC) when compared to CO (p<0.05). Remineralizing agents (MP, MPP, and DF) were able to inhibit demineralization of human enamel subjected to high cariogenic challenge in situ. DF had the greatest preventive potential against the progression of carious lesions.

Complementary remineralizing effect of self-assembling peptide (P11-4) with CPP-ACPF or fluoride: An in vitro study

Background

Self-assembling peptide has been recently introduced to promote hard tissue regeneration for treating early non-cavitated carious lesions. This study investigates the efficacy of biomimetic self-assembling peptide (P11-4) on enamel remineralization combined with CPP-ACPF or fluoride.

Material and Methods

Artificial enamel lesions were created on buccal surface of 60 specimens and were randomly assigned to six groups according to the remineralizing agent: G1-(Control, artificial saliva), G2-(Fluoride varnish), G3-(CPP-ACPF varnish), G4-(Self-assembling peptide), G5-(Self-assembling peptide+fluoride varnish), G6-(Self-assembling peptide+CPP-ACPF varnish). All products were applied according to manufacturer’s instructions and specimens were stored in a daily renewed artificial saliva. Surface microhardness (SMH) and scanning electron microscope (SEM) were assessed at baseline, after demineralization, 1 week and 4 weeks storage. SMH values were analyzed using ANOVA and Tukey’s post-hoc test.

Results

The highest statistically significant SMH values were found in G6 followed by G5, G4, G2 and G3 while the lowest values were found in G1. No statistically significant difference was found between G5 and G6. Also, no statistically significant difference was found between G2 and G3. SEM showed that G4, G5, G6 resulted in more pronounced remineralization, reversing the demineralized enamel fish scale pattern compared to G2 and G3 after 1 week and 4 week remineralization.

Conclusions

Complementary effect was obtained after combining self-assembling peptide with CPP-ACPF or fluoride showing the highest remineralizing potential early after 1 week and even after 4 weeks compared to when each agent used alone. Added benefits can be obtained through combining self-assembling peptide with other remineralzing agents allowing faster and enhanced regeneration of non-cavitated caries lesions.

Key words:Enamel regeneration, biomimetic remineralization, self-assembling peptide, CPP-ACPF, fluoride.

Effects of different anti-caries procedures on microhardness and micromorphology of irradiated permanent enamel

To explore the effects of infiltration resin, casein phosphate polypeptide-amorphous calcium phosphate (CPP-ACP) and fluoride on microhardness and micromorphology of irradiated enamel. Sixty human permanent teeth were mesiodistally sectioned, yielding 120 enamel samples, which randomly divided into 8 groups: G1: blank control; G2: irradiation control; G3: irradiation+fluoride; G4: irradiation+CPP-ACP; G5: irradiation+CPP-ACP+fluoride; G6: irradiation+infiltration resin; G7: irradiation+infiltration resin+fluoride; G8: irradiation+infiltration resin+CPP-ACP. A progressive improvement was observed on the superficial morphology of enamel treated with different anti-caries procedures. The order of microhardness values after irradiation from the highest to the lowest was as follows: G1>G8~G7>G6>G5>G4~G3>G2. CPP-ACP, infiltration resin and fluoride can effectively restore the direct destruction of enamel caused by irradiation and promote the occurrence of remineralization. Infiltration resin and its combined effects with fluoride or CPP-ACP have the most potential anti-caries agent to resist radiation-caries.

Effect of Dental Erosion and Methods for its Control on the Marginal and Internal Adaptation of Restorations with Different Adhesive Systems

AbstractThe dentin exposed to erosive challenges is often superficially protected to prevent progression of the lesion. This study investigated the marginal and internal adaptation of composite resin restorations made on surfaces that had first been treated with different methods for controlling erosion. Cavities with margins in dentin were prepared in bovine incisors (n=360) and were divided into three groups according to the method for controlling the erosive challenge: negative control, topical application of fluoride and resin-modified glass ionomer varnish. The specimens were then randomly divided into three sub-groups according to the exposure to simulated gastric acid solution (DES) (5% HCl, pH=2.2) and subsequent remineralization (RE): negative control, 9 and 18 cycles of DES-RE. Finally, teeth were divided into four groups, depending on the bonding agent used for composite resin restoration (n=10): conventional etch-and-rinse adhesive system (2 and 3 steps) and self-etching (1 and 2 steps). Front and internal images of the interface tooth/restoration were recorded in stereoscopic microscope (15x) to quantify the percentage of adhesive failures. Despite the promising results of the resin-modified glass ionomer varnish after 9 cycles; no protective material prevented increased internal defects after 18 erosive cycles. More continuous internal margins were noted with etch-and-rinse acid systems after more intense erosion. The maintenance of internal margins in eroded substrates was positively influenced by the resin-modified glass ionomer varnish and, under the most aggressive challenge, by the use of etch-and-rinse adhesives systems. Keywords: Tooth Erosion. Dentin. Acid Gastric. ResumoA dentina exposta a desafios erosivos é muitas vezes superficialmente protegida para prevenir a progressão da lesão. Este estudo investigou a adaptação marginal e interna de restaurações de resina composta realizadas em superfícies que foram previamente tratadas com diferentes métodos para controlar a erosão. Cavidades com margens em dentina foram preparadas em dentes incisivos bovinos (n=360) e divididas em três grupos de acordo com o método de controle do desafio erosivo: controle negativo, aplicação tópica de flúor e verniz de ionômero de vidro modificado por resina. Os espécimes foram então divididos aleatoriamente em três subgrupos de acordo com a exposição à solução de ácido gástrico simulada (DES) (HCl a 5%, pH = 2,2) e posterior remineralização (RE): controle negativo, 9 e 18 ciclos de DES-RE. Por fim, os dentes foram divididos em quatro grupos, de acordo com o agente de união utilizado para a restauração da resina composta (n=10): sistema adesivo convencional (2 e 3 passos) e autocondicionante (1 e 2 passos). Imagens frontais e internas da interface dente/restauração foram registradas em microscópio estereoscópico (15x) para quantificar a porcentagem de falhas adesivas. Apesar dos resultados promissores do verniz de ionômero de vidro modificado por resina após 9 ciclos; nenhum material de proteção impediu o aumento de defeitos internos após 18 ciclos erosivos. Margens internas mais contínuas foram observadas com sistemas adesivos convencionais após erosão mais intensa. A manutenção das margens internas em substratos erodidos foi influenciada positivamente pelo verniz de ionômero de vidro modificado por resina e, sob o desafio mais agressivo, pelo uso de sistemas de adesivos convencionais. Palavras-chave: Erosão Dentária. Dentina. Ácido Gástrico.

Effects of Dentifrices Differing in Fluoride Content on Remineralization Characteristics of Dentin in vitro

OBJECTIVES

The aim of this study was to compare the caries preventive effect of highly fluoridated dentifrices and gels on sound dentin as well as on artificial dentin caries-like lesions.

METHODS

Bovine dentin specimens (n = 240), with 2 different surfaces each (1 sound surface [sound treatment (ST)] and one caries lesion [demineralized treatment (DT)]), were prepared and randomly allocated to one highly (6 × 120 min demineralization/day [H]) and one lowly cariogenic (6 × 60 min demineralization/day [L]) pH-cycling model. Treatments during pH-cycling (28 days) were: brushing 2×/day with: 0 ppm F [H0/L0], 1,450 ppm F [H1,450/L1,450], 2,800 ppm F [H2,800/L2,800], 5,000 ppm F [H5,000/L5,000], 5,000 ppm F plus TCP [H5,000+TCP/L5,000+TCP], and 12,500 ppm F [H12,500/L12,500] containing dentifrices/gels. Dentifrice/gel slurries were prepared with deionized water (1:2 wt/wt). Differences in integrated mineral loss (∆∆Z) and ∆ lesion depth were calculated between values before and after pH-cycling using transversal microradiography.

RESULTS

The correlation between ΔΔZDT and F- was strong for the highly (rH = 0.691; p < 0.001) and moderate (rL = 0.500; p < 0.001) for the lowly cariogenic model, indicating a fluoride dose-response for both. Significant differences for ΔΔZDT and ΔΔZST could be found between H0, H1,450, H5,000, and H12,500 as well as L0, L5,000, and L125,000 (p ≤ 0.046; analysis of covariance [ANCOVA]). Except for 0 ppm F-, no significant difference in ΔΔZST and ΔΔZDT could be found between the highly and lowly cariogenic model (p ≥ 0.056; ANCOVA).

CONCLUSION

For both pH-cycling conditions a dose-response for fluoride could be revealed. For elderly people with exposed root surfaces, the use of gels containing 12,500 ppm F instead of regularly (1,450 ppm F) or highly (5,000 ppm F) fluoridated dentifrices should be further investigated, as it offered higher caries-preventive effects in vitro.

Comparative Evaluation of Remineralization Potential of Two Varnishes Containing CPP-ACP and Tricalcium Phosphate: An In Vitro Study

Aim

The aim of this study is to evaluate the remineralization potential of Clinpro XT varnish containing tricalcium phosphate (TCP) and MI varnish containing casein phosphopeptide (casein phosphopeptide–amorphous calcium phosphate, CPP–ACP).

Materials and methods

Thirty premolar teeth were taken and divided into three groups. Samples were sliced mesiodistally into buccal and lingual halves using a diamond disk bur. The buccal halves of the teeth were used for the study. Artificial caries like lesions were produced and evaluated with Diagnodent. The samples in each group were treated with the respective remineralizing agent (except for the control group) at every 24 hours for 7 days and the surfaces were assessed using Diagnodent to record the values after the remineralization procedure. The Diagnodent values obtained were tabulated and statistically analyzed using one-way ANOVA and Tukey's multiple comparison tests.

Results

There was a significant difference between the values calculated before and after remineralization in all the three groups.

Conclusion

The study findings showed that MI varnish containing CPP–ACP had the highest release of fluoride as compared to the Clinpro fluoride releasing varnish.

Clinical significance

MI varnish is a 5% NaF varnish containing CPP–ACP to give an exceptional fluoride varnish that releases more bioavailable fluoride, calcium, and phosphate, hence, can be used successfully in remineralization of early carious lesions. CPP–ACP can be used in the clinical practice for reversing or arresting the early carious lesions.

How to cite this article

Varma V, Hegde KS, et al. Comparative Evaluation of Remineralization Potential of Two Varnishes Containing CPP–ACP and Tricalcium Phosphate: An In Vitro Study. Int J Clin Pediatr Dent 2019;12(3):233–236.

Effectiveness of polyacrylic acid-bioactive glass air abrasion preconditioning with NovaMin remineralization on the microhardness of incipient enamel-like lesion

Background:

Bioactive glass (BAG) remineralization is a promising method for dental hard tissue regeneration. The aim of this study was to evaluate the microhardness of incipient enamel-like lesions with or without preconditioning by air abrasion using polyacrylic acid (PAA)-BAG before application of NovaMin remineralizing agent.

Materials and Methods:

Forty extracted human molars were selected, sectioned mesiodistally obtaining buccal and lingual halves, and embedded in resin molds. Specimens were randomly assigned to four groups (n = 10) according to the remineralization protocol: G1 (control, artificial saliva), G2 (preconditioning), G3 (NovaMin), and G4 (preconditioning and NovaMin). Enamel windows 4 mm × 4 mm were done on the buccal and lingual surfaces. Specimens were immersed in a daily renewed demineralizing solution to create white spot lesions. Remineralizing agents were applied according to the manufacturer's instructions, and specimens were stored in a daily renewed artificial saliva. Microhardness was assessed using Vickers hardness number (VHN) at baseline (positive control), after demineralization (negative control), and after 24-h and 1-month remineralization.

Results:

The preconditioning/NovaMin group after 1 month showed a statistically significant high VHN, with no statistically significant difference between it and the positive control. This was followed by the NovaMin group after 1 month, while the lowest VHN was found in the demineralized group, with no statistically significant difference between it and the preconditioning group, whether after 24 h or 1 month.

Conclusions:

Enamel preconditioning with PAA-BAG air abrasion play a major role in enhancement of remineralization when it is accompanied with NovaMin. Furthermore, an extended period of time had helped to attain more benefits from NovaMin remineralization.

Clinical Significance:

Enamel remineralization with NovaMin after conditioning by bioactive glass air abrasion, provides the patients with a fast and durable treatment of incipient enamel lesions, which would reduce the possibility of future progression of demineralization and caries occurrence.

Effects of different anti-caries agents on microhardness and superficial microstructure of irradiated permanent dentin: an in vitro study

BACKGROUND

To compare different anti-caries agents on microhardness and micromorphology of irradiated permanent dentin in vitro, and try to find the most effective agent to prevent radiation-dentin-destruction.

METHODS

A total of 120 dentin samples were prepared from 60 human teeth and randomly divided into 8 groups (n = 15), [ (1)] blank control [2]; irradiation control [3]; irradiation+ fluoride [4]; irradiation+ casein phosphate polypeptide-amorphous calcium phosphate (CPP-ACP) [5]; irradiation+ CPP-ACP+ fluoride [6]; irradiation+ infiltration resin [7]; irradiation+ infiltration resin+ fluoride [8]; irradiation+ infiltration resin+ CPP-ACP. Seven samples of each groups were chosen randomly for microhardness test and eight for scanning electron microscope observation.

RESULTS

A decrease of microhardness (P < 0.05) and an obvious morphological change were presented on dentin surface after radiotherapy. After applications of anti-caries agents, the morphological destructions were effectively restored. The infiltration resin plus fluoride group (56.00 ± 4.02 Kg/mm2), infiltration resin plus CPP-ACP group (56.05 ± 3.69 Kg/mm2), infiltration resin group (54.70 ± 4.42Kg/mm2) and CPP-ACP plus fluoride group (53.84 ± 6.23Kg/mm2) had the highest dentin microhardness value after radiotherapy, and no statistically significant difference were found between them.

CONCLUSIONS

Infiltration resin, CPP-ACP, fluoride and their pairwise combination can effectively prevent radiation-dentin-destruction. Among them, infiltration resin with CPP-ACP, infiltration resin with fluoride, CPP-ACP with fluoride, and infiltration resin have the most protective effects on irradiation-dentin-destructions.

Remineralizing effect of commercial fluoride varnishes on artificial enamel lesions

The aim of this study was to evaluate soluble and insoluble fluoride concentrations in commercial varnishes, and their remineralization effect on artificial caries enamel lesions using surface and cross-sectional microhardness evaluations. Forty bovine enamel blocks were separated into four groups (n=10): control (no treatment), Enamelast (Ultradent Products), Duraphat (Colgate-Palmolive) and Clinpro White Varnish (3M ESPE). Surface enamel microhardness evaluations were obtained, artificial enamel caries lesions were developed by dynamic pH-cycling, and the varnishes were then applied every 6 days, after which the enamel blocks were submitted to dynamic remineralization by pH cycles. After removal of the varnishes, the enamel surfaces were reassessed for microhardness. The blocks were sectioned longitudinally, and cross-sectional microhardness measurements were performed at different surface depths (up to 300 μm depth). Polarized light microscopy images (PLMI) were made to analyze subsurface caries lesions. The fluoride concentration in whole (soluble and insoluble fluoride) and centrifuged (soluble fluoride) varnishes was determined using an extraction method with acetone. The data were analyzed to evaluate the surface microhardness, making adjustments for generalized linear models. There was a significant decrease in enamel surface microhardness after performing all the treatments (p<0.0001). Enamelast and Duraphat showed significantly higher enamel microhardness values than the control and the Clinpro groups (p = 0.0002). Microhardness loss percentage was significantly lower for Enamelast (p = 0.071; One-way ANOVA). PLMI showed that subsurface caries lesions were not remineralized with the varnish treatments. No significant differences in the in-depth microhardness levels (p = 0.7536; ANOVA) were observed among the treatments. Enamelast presented higher soluble and insoluble fluoride concentrations than the other varnishes (p < 0.0001; Kruskal-Wallis and Dunn tests). Enamelast and Duraphat varnishes promoted enamel surface remineralization, but no varnish remineralized the subsurface lesion body. Although insoluble and soluble fluoride concentration values did not correspond to those declared by the manufacturer, Enamelast presented higher fluoride concentration than the others.

Effect of Heavy Metals Contamination from Cigarette Smoke on Sound and Caries-Like Enamel

In this study, we sought to evaluate the influence of cigarette smoke and pH cycling on the chemical composition and surface/cross-sectional enamel microhardness. A total of 40 dental blocks obtained from bovine incisors were divided into four groups (n=10): no treatment (control); exposure to cigarette smoke (CS); exposure to pH cycling (PC); and exposure to cigarette smoke and pH cycling (CS-PC). The samples were analyzed by synchrotron radiation micro X-ray fluorescence, bench mode X-ray fluorescence, as well as surface microhardness (SMH) and cross-sectional microhardness (CSMH) testing. The SMH results were submitted to analysis of variance (ANOVA) and Tukey's test. The CSMH results were evaluated using split-plot ANOVA and Tukey's test. A high amount of Cd and Pb and traces of Ni and As were observed in enamel and dentin after exposure to cigarette smoke (CS and CS-PC). The SMH and CSMH of CS were statistically higher when compared with the control. The PC and CS-PC showed lower SMH and CSMH. We conclude that exposure to cigarette smoke promoted heavy metal deposition in enamel/dentin. In addition, it increased the enamel microhardness but did not promote a protective effect on the in vitro development of caries. The clinical significance of this work is that there is significant bioaccumulation of heavy metals from cigarette smoke on the surface and in the enamel and dentin.

Remineralization Efficacy of an Amelogenin-Based Synthetic Peptide on Carious Lesions

Objective: The aim of this study was to evaluate the remineralization efficacy of an amelogenin-based peptide on initial enamel carious lesions in vitro. Furthermore, we attempted to provide insights into the possible mechanism of the remineralization, including determining the calcium-binding properties of the peptide and its effects on calcium phosphate mineralization.

Methods: The peptide comprising the N-terminus and the C-terminus of porcine amelogenin was synthesized by Synpeptide Co., Ltd. Fifty specimens were randomly assigned to five immersing treatment groups for 12 days: remineralizing medium only; 12.5 μg/mL peptide + remineralizing medium; 25 μg/mL peptide + remineralizing medium; 50 μg/mL peptide + remineralizing medium; fluoride + remineralizing medium. After immersion, mean mineral loss before and after remineralization of each specimen was determined using micro-CT. Mean mineral gain after remineralization was calculated. Calcium binding properties were measured by Isothermal titration calorimetry (ITC). TEM and Fourier transform-infrared were used to determine the effects of the peptide on calcium phosphate mineralization.

Results: A significant decrease in mineral loss after remineralization process in all groups was observed (p < 0.05). Treatment in remineralizing medium resulted in the lowest mineral gain while the fluoridated treatment exhibited the highest mineral gain among all groups. Inclusion of synthetic peptide in the remineralizing medium exhibited a higher mineral gain and the gain of 50 μg/mL group was greater than that of the 25 μg/mL group. No significant difference in mineral gain was observed between the remineralizing medium only group and the 12.5 μg/mL peptide group (p > 0.05). ITC values showed that the Ca²⁺-binding affinity of the peptide is about 9.914 × 10⁴M⁻¹. Furthermore, the peptide was found to inhibit calcium phosphate precipitation and stabilize amorphous calcium phosphate formation for more than 2 h and finally transform into ordered hydroxyapatite crystals.

Conclusion: Specific concentrations of the amelogenin-based synthetic peptide promoted in vitro remineralization, with higher concentrations exhibiting significantly greater remineralization. This study presented evidence suggesting that the peptide may act as a Ca²⁺carrier as well as a regulating factor. When the stabilizing calcium and phosphorus ions bind with the peptide they become biologically available for the remineralization of deeper carious lesions, while also regulated by the peptide to transform into ordered hydroxyapatite crystals.

Effect of dentifrice containing fTCP, CPP-ACP and fluoride in the prevention of enamel demineralization

OBJECTIVE

To evaluate the effect of different fluoride- and calcium- and/or phosphate-containing products on their ability to prevent enamel demineralization under pH cycling conditions.

MATERIAL AND METHODS

Enamel bovine specimens were assigned to the following groups: G1-MPP (MI Paste Plus, 0.2% NaF, Recaldent™, GC Corporation Tokyo, Japan); G2-FD (Crest™ Cavity Protection, 0.243% NaF, Procter & Gamble, USA); G3-CLP (Clinpro™ 5000, 1.1% NaF, 3M ESPE, USA); and G4-CO (Control without fluoride, Silica-based dentifrice; Daudt Ltda, Brazil). The specimens were soaked in demineralizing solution for 6 h and remineralizing solution for 18 h alternatively for 10 days. The toothpaste was prepared with deionized water in a 1:3 ratio (w/v) for three minutes daily. The solutions were renewed every 48 h. After cycling, enamel changes were analysed by percentage change of SMH (%SMH) and energy-dispersive X-ray spectroscopy (EDS). The %SMH value observed for G3-CLP (2.9 ± 39.2) was higher than that found in G4-CO (-13.0 ± 20.7), G1-MPP (-8.9 ± 20.9) and G2-FD (-3.9 ± 27.1). The %SMH was similar for all treatment groups (one-way ANOVA and Tukey's HSD; p < .05). The pH, Ca²⁺ and P_total in the remineralization solutions were not different among all groups (Kruskal-Wallis; p < .05). At 24 h, the Ca²⁺ concentration in the demineralization solution was significantly lower in G1-MPP. Ca²⁺ concentration increased in all groups after 48 h, except for G3-CLP. The EDX quantitative analysis showed that the atomic % of elements is lower level at G4-CO.

CONCLUSIONS

The Clinpro™ 5000 demonstrated having the most protective effect against demineralization; however, the % SMH was similar for all groups.

Effect of fluoride dentifrice and casein phosphopeptide-amorphous calcium phosphate cream with and without fluoride in preventing enamel demineralization in a pH cyclic study

OBJECTIVE

Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) complexes are anticariogenic and capable of remineralizing the early stages of enamel lesions. The use of fluoride prevents dental decay and the association of CPP-ACP with fluoride can increase remineralization. To evaluate the effect of CPP-ACP and CPP-ACPF creams associated with a fluoride dentifrice to prevent enamel demineralization in a pH cyclic model.

MATERIAL AND METHODS

Previously selected by surface microhardness (SH) analysis, human enamel blocks (n = 56) were submitted to daily treatment with dentifrice in a pH-cycling model. The enamel blocks were divided into four groups; G1: Crest™ Cavity Protection - Procter & Gamble (1,100 ppmF of NaF); G2: Crest™ +MI Paste (MP) - Recaldent™ GC Corporation Tokyo, Japan); G3: Crest™ + MI Paste Plus (MPP) - Recaldent™ 900 ppm as NaF, GC Corporation Tokyo, Japan), and G4: control, saliva. Specimens were soaked alternatively in a demineralizing solution and in artificial saliva for 5 d. The fluoride dentifrice, with proportion of 1:3 (w/w), was applied three times for 60 s after the remineralization period. The undiluted MP and MPP creams were applied for 3 m/d. After cycling, SH was re-measured and cross section microhardness measurements were taken.

RESULTS

The SH values observed for the groups G3 (257±70), G1 (205±70), and G2 (208±84) differed from the G4 group (98±110) (one-way ANOVA and Tukey's post hoc test). There were no differences between the groups G1xG2, G2xG3, and G1xG3 for demineralization inhibition. The percentage of volume mineral showed that, when applied with fluoride dentifrice, MPP was the most effective in preventing enamel demineralization at 50 µ from the outer enamel surface (Kruskal-Wallis and Mann Whitney p<0.05).

CONCLUSION

Fluoride dentifrice associated with CPP-ACPF inhibited subsurface enamel demineralization.

Caries-Preventive Effect of NaF, NaF plus TCP, NaF plus CPP-ACP, and SDF Varnishes on Sound Dentin and Artificial Dentin Caries in vitro

The aim of this study was to compare the caries-preventive effect of different fluoride varnishes on sound dentin as well as on artificial dentin caries-like lesions. Bovine dentin specimens (n = 220) with one sound surface (ST) and one artificial caries lesion (DT) were prepared and randomly allocated to 11 groups. The interventions before pH cycling were as follows: application of a varnish containing NaF (22,600 ppm F-; Duraphat [NaF0/NaF1]), NaF plus tricalcium phosphate (22,600 ppm F-; Clinpro White Varnish Mint [TCP0/TCP1]), NaF plus casein phosphopeptide-stabilized amorphous calcium phosphate complexes (CPP-ACP; 22,600 ppm F-; MI Varnish [CPP0/CPP1]), or silver diamine fluoride (SDF; 35,400 ppm F-; Cariestop 30% [SDF0/SDF1]) and no intervention (NNB/N0/N1). During pH cycling (14 days, 6 × 120 min demineralization/day) half of the specimens in each group were brushed (10 s; 2 times/day) with either fluoride-free (“0”; e.g., TCP0) or 1,100 ppm F- (“1”; e.g., TCP1) dentifrice slurry. In another subgroup, the specimens were pH cycled but not brushed (NNB). Differences in integrated mineral loss (ΔΔZ), lesion depth (ΔLD), and colorimetric values (ΔΔE) were calculated between the values after initial demineralization and those after pH cycling, using transversal microradiography and photographic images. After pH cycling, no discoloration could be observed. Furthermore, NNB, N0, and N1 showed significantly increased ΔZDT/LDDT and ΔZST/LDST values, indicating further demineralization. In contrast, CPP0, CPP1, SDF0, and SDF1 showed significantly decreased ΔZDT/LDDT values, indicating remineralization (p ≤ 0.004; paired t test). CPP0, CPP1, SDF0, and SDF1 showed significantly higher changes in ΔΔZDT/ΔLDDT and ΔΔZST/ΔLDST than NNB, N0, and N1 (p < 0.001; Bonferroni post hoc test). In conclusion, under the conditions chosen, all fluoride varnishes prevented further demineralization. However, only NaF plus CPP-ACP and SDF could remineralize artificial dentin caries-like lesions under net-demineralizing conditions, thereby indicating that NaF plus CPP-ACP and SDF may be helpful to high-caries-risk patients.

Comparative evaluation of remineralizing efficacy of biomimetic self-assembling peptide on artificially induced enamel lesions: An in vitro study

Background

The biomimetic self-assembling peptide technology is a paradigm for dental hard tissue regeneration.

Aim

To investigate the efficacy of biomimetic self-assembling peptide (P₁₁-4) on enamel remineralization compared to casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF) and fluoride-based delivery systems.

Materials and Methods

Artificial enamel lesions were created on buccal surfaces of 40 extracted human molars. Specimens were randomly assigned to four groups (n = 10) according to the remineralizing agent used: G1 - control: artificial saliva, G2 - fluoride varnish, G3 - CPP-ACPF varnish, G4 - self-assembling peptide agent. All products were applied according to the manufacturer's instructions and the specimens were stored in daily renewed artificial saliva. Surface microhardness (SMH) was assessed at baseline, after demineralization, after 1 week and after 4 weeks storage. SMH values were analyzed using ANOVA and Tukey's post hoc test.

Results

Self-assembling peptide showed the highest statistically significant mean SMH followed by fluoride and CPP-ACPF while the lowest mean SMH was found in artificial saliva. However, no statistically significant difference was found between fluoride and CPP-ACPF. Higher statistically significant mean SMH was found after 4 weeks compared to 1 week remineralization in all groups.

Conclusions

Self-assembling peptide confers the highest remineralizing efficacy compared to fluoride and CPP-ACPF, showing a promising, noninvasive regeneration potential. Furthermore, extended period of time helped attain more benefits from the remineralizing regimens applied.

Influence of biofilm formation on the mechanical properties of enamel after treatment with CPP-ACP crème

The study aimed to investigate the effects of bacterial biofilms on changes in the surface microhardness of enamel treated with casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) with and without fluoride. Human enamel blocks with incipient caries-like lesions were divided into four groups of 13: G1: Saliva (Control); G2: fluoride dentifrice (Crest™, 1100 ppm as NaF); G3: CPP-ACP (MI Paste; Recaldent™); and G4: CPP-ACPF (MI Paste Plus; Recaldent™ 900 ppm as NaF). The specimens were soaked in demineralizing solution for 6 h and remineralized in artificial saliva for 18 h alternately for 10 days. The dentifrice was prepared with deionized water in a 1 : 3 ratio (w/w) or applied undiluted in the case of the CPP-ACP group. The surface microhardness (SMH) was evaluated at baseline, after artificial caries, after pH cycling and treatment with dentifrices, and after incubation in media with Streptococcus mutans for biofilm formation. The biofilms were exposed once a day to 2% sucrose and the biofilm viability was measured by MTT reduction. The percentage of change in surface microhardness (%SMHC) was calculated for each block. The data were analyzed by nonparametric test comparisons (α = 0.05). The %SMHC values observed in G2 were different from those of G1, G3, and G4 (p < 0.05). After biofilm formation, %SMHC was positive in G2 and G4 when compared to G1 and G3, but resistance to demineralization after biofilm formation was similar in all groups. In conclusion, the presence of biofilms did not influence the treatment outcomes of anticaries products.

Effect of different fluoride varnishes on remineralization of artificial enamel carious lesions

OBJECTIVES

To compare remineralization potential of topical fluoride varnishes with added calcium phosphate-based delivery systems on artificial enamel caries.

METHODS

Human enamel specimens (n = 60) were randomly divided into six groups: Group 0: Control (no varnish), Group 1: Duraphat^® , Group 2: MI Varnish^™ , Group 3: Embrace^™ Varnish, Group 4: Enamel Pro^® Varnish, and Group 5: Clinpro^™ White Varnish. Specimens were immersed in demineralizing solution for 96 h to create artificial caries lesion. Each specimen was then immersed in artificial saliva for 6 h after fluoride varnish application and pH cycling was performed for 8 days. Specimens were evaluated using Knoop surface microhardness (KHN) and transverse microradiography (TMR). One-way anova test was performed to examine the effect of fluoride varnishes on change in percentage of surface hardness recovery (%SHR), change in lesion depth (ΔLD), and change in mineral loss (ΔΔZ) with the significance limit set at 5%.

RESULTS

%SHR of enamel following treatment with Group 1 was significantly higher than Group 3 and Group 4. Conversely, ΔLD and ΔΔZ of Group 1 were significantly higher than Group 2, Group 3, and Group 4. No significant differences in %SHR, ΔLD, and ΔΔZ were found between Group 1 and Group 5.

CONCLUSIONS

Duraphat^® alone achieves significant remineralization of enamel carious lesions. Clinpro^™ White Varnish had similar enamel remineralization effect as Duraphat^® .

Randomized clinical trial of the effect of NovaMin and CPP-ACPF in combination with dental bleaching

OBJECTIVE

This randomized, controlled, double-blind clinical study evaluated the effect of calcium sodium phosphosilicate (NovaMin) and casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) on the prevention of post-operative sensitivity and on the effects of clinical bleaching treatment.

MATERIAL AND METHODS

Sixty volunteers were selected according to inclusion and exclusion criteria and were randomly assigned into three groups (n=20): CG (control group) patients, who were treated with 35% hydrogen peroxide; NOVAG (NovaMin group) patients, who were treated with 35% hydrogen peroxide followed by the application of NovaMin; and CPPG (CPP group) patients, who were treated with 35% hydrogen peroxide followed by the application of CPP-ACPF. Both bioactive agents were applied for five minutes. An evaporative stimulus associated with a modified visual scale was used to analyze sensitivity 24 hours after each bleaching session. The color evaluation was performed on the maxillary central incisors using a spectrophotometer. Associations between the intervention group, bleaching session, and reported sensitivity were tested using Chi-square partitioning.

RESULTS

Color change values (ΔE) were analyzed using analysis of variance (ANOVA). The significance level used for both tests was 5%. In the intragroup assessment, the Friedman test showed that only the CPP-ACPF group showed no statistically significant difference (p<0.05) between baseline and first bleaching session. In the intergroup assessment, the Kruskal-Wallis test showed that the CPPG had less postoperative sensitivity after the first session, when compared to the other groups (p<0.05). Color change analysis (ΔE) showed a significant difference between the means obtained in the different bleaching sessions in all groups (p<0.05).

CONCLUSIONS

This study showed that the combination of CPP-ACPF with 35% hydrogen peroxide significantly reduced post-operative sensitivity in the first session, compared with the other evaluated treatments. The association of CPP-ACPF and NovaMin did not affect the color change induced by tooth bleaching.

Efficacy of fluoride varnishes for preventing enamel demineralization after interproximal enamel reduction. Qualitative and quantitative evaluation

Objectives

To evaluate quantitatively and qualitatively the changes produced to enamel after interproximal reduction and subjected to demineralization cycles, after applying a fluoride varnish (Profluorid) and a fluoride varnish containing tricalcium phosphate modified by fumaric acid (Clinpro White).

Materials and methods

138 interproximal dental surfaces were divided into six groups: 1) Intact enamel; 2) Intact enamel + demineralization cycles (DC); 3) Interproximal Reduction (IR); 4) IR + DC; 5) IR + Profluorid + DC; 6) IR + Clinpro White + DC. IR was performed with a 0.5 mm cylindrical diamond bur. The weight percentage of calcium (Ca), phosphorous (P) and fluoride (F) were quantified by energy-dispersive X-ray spectrometry (EDX). Samples were examined under scanning electron microscopy (SEM).

Results

The weight percentage of Ca was significantly higher (p<0.05) in Groups 1, 2 and 5 than Groups 4 and 6. No significant differences were detected in the weight percentage of Ca between Group 3 and the other groups (p>0.05). The weight percentage of P was similar among all six groups (p>0.05). F was detected on 65% of Group 6 surfaces. SEM images of Groups 4 and 6 showed signs of demineralization, while Group 5 did not.

Conclusions

Profluorid application acts as a barrier against the demineralization of interproximally reduced enamel.

The innovative applications of therapeutic nanostructures in dentistry

Nanotechnology has paved multiple ways in preventing, reversing or restoring dental caries which is one of the major health care problems. Nanotechnology aided in processing variety of nanomaterials with innovative dental applications. Some showed antimicrobial effect helping in the preventive stage. Others have remineralizing potential intercepting early lesion progression as nanosized calcium phosphate, carbonate hydroxyapatite nanocrystals, nanoamorphous calcium phosphate and nanoparticulate bioactive glass particularly with provision of self-assembles protein that furnish essential role in biomimetic repair. The unique size of nanomaterials makes them fascinating carriers for dental products. Thus, it is recentlyclaimedthat fortifying the adhesives with nanomaterials that possess biological meritsdoes not only enhance the mechanical and physical properties of the adhesives, but also help to attain and maintain a durable adhesive joint and enhanced longevity. Accordingly, this review will focus on the current status and the future implications of nanotechnology in preventive and adhesive dentistry.

Remineralizing potential of CPP-ACP creams with and without fluoride in artificial enamel lesions

BACKGROUND

This study evaluated the effect of pastes containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) with and without fluoride on enamel demineralization.

METHODS

Human enamel blocks were used and after incipient caries-like lesions were formed, they were assigned to four groups: G1 - saliva; G2 - MI Paste (Recaldent^TM ); G3 - MI Paste Plus (Recaldent^TM 900 ppm as NaF); and G4 - Crest^™ (1.100 ppm as NaF). The specimens were soaked in demineralizing solution for 6 hours and remineralized in artificial saliva for 18 hours alternatively for 10 days. The dentifrice was prepared with deionized water in a 1:3 proportion (w/w) or applied undiluted in the case of the CPP-ACP formula. Demineralized enamel changes were analysed by surface microhardness (SMH), 3D-profilometry and SEM. Data were analysed by non-parametric Kruskal-Wallis and Mann-Whitney test comparisons and one-way ANOVA and Tukey's HSD post hoc test (α = 0.05).

RESULTS

The SMH values observed in the G2 (47.8 ± 28.5) and G3 (53.6 ± 27.6) groups were different from that of G4 (90.2 ± 17.1), which were significantly higher than that found in G1 (39.4 ± 14.2). The %SMH was significantly lower in G4 when compared to G1 (p < 0.001) and G3 (p < 0.05).

CONCLUSIONS

MI Paste Plus demonstrated a greater protective effect against demineralization than MI Paste and showed smoother surfaces.

Dental demineralization and caries in patients with head and neck cancer

Concurrent chemoradiation (CCR) therapy is a standard treatment for patients with locally advanced head and neck cancer (HNC). It is well documented that CCR causes profound acute and late toxicities. Xerostomia (the symptom of dry mouth) and hyposalivation (decreased salivary flow) are among the most common treatment side effects in this cohort of patients during and following treatment. They are the result of radiation-induced damage to the salivary glands. Patients with chronic hyposalivation are at risk for demineralization and dental cavitation (dental caries), often presenting as a severe form of rapidly developing decay that results in loss of dentition. Usual post-radiation oral care which includes the use of fluoride, may decrease, but does not eliminate dental caries associated with radiation-induced hyposalivation. The authors conducted a narrative literature review regarding dental caries in HNC population based on MEDLINE, PubMed, CLNAHL, Cochrane database, EMBASE, and PsycINFO from 1985 to 2014. Primary search terms included head and/or neck cancer, dental caries, dental decay, risk factor, physical symptom, physical sequellea, body image, quality of life, measurement, assessment, cost, prevention, and treatment. The authors also reviewed information from National Institute of Dental and Craniofacial Research (NIDCR), American Dental Association (ADA), and other related healthcare professional association web sites. This literature review focuses on critical issues related to dental caries in patients with HNC: potential mechanisms and contributing factors, clinical assessment, physical sequellea, negative impact on body image and quality of life, potential preventative strategies, and recommendations for practice and research in this area.

Effect of chicken egg shell powder solution on early enamel carious lesions: an invitro preliminary study

AIM

To evaluate the remineralization potential of enamel surface lesion using chicken eggshell powder (CESP) solution.

MATERIALS AND METHODS

Ten freshly extracted un-erupted third molars decoronated at cement-enamel junction (CEJ) used in this study. Each decoronated tooth was sectioned to get 4 samples of enamel blocks such that 40 blocks were obtained which were then subjected to demineralization protocol and grouped as: Group 1-untreated group, Group 2-subsurface demineralization, Group 3-subsurface demineralization + 7 days CESP immersion, Group 4- subsurface demineralization + clinpro application. The samples were evaluated for X-ray fluorescence spectroscopy analysis, microhardness testing and atomic analyses using energy dispersive X-ray spectroscopy. The data were statistically analysed by using one-way ANOVA and Tukey - Kramer multiple comparison test.

RESULTS

X-ray Fluorescence spectroscopy shows Calcium concentration of 98% and 0.46% of phosphate. Group 4 (Clinpro) shows the highest efficacy in enhancing the remineralization followed by Group 3 (CESP). The results of atomic analyses showed that quantitative amounts of Ca weight % and P weight % is statistically greater for all the three groups except the demineralized group.

CONCLUSION

CESP with higher calcium content can remineralise enamel surface lesion.