The one-step no-prep approach for full-mouth rehabilitation of worn dentition using PICN CAD-CAM restorations: 2-yr results of a prospective clinical study

Clinical performance of minimally invasive full-mouth rehabilitation using different materials and techniques for patients with moderate to severe tooth wear: a systematic review and meta-analysis

OBJECTIVE

To evaluate short, mid and long-term clinical outcomes and patients' satisfaction of minimally invasive full-mouth rehabilitation using different materials and techniques for patients with moderate to severe tooth wear. Furthermore, materials were analyzed to identify their influences on clinical results.

MATERIALS AND METHODS

Search was conducted in PubMed, Cochrane Central Register of Controlled Trial, Embase, Web of science and Scopus until December 19, 2024. Randomized clinical trials (RCT), cohort studies and case series with at least mean period of 3 years were included. The revised Cochrane risk of bias tool, Newcastle-Ottawa scale and Joanna Briggs Institute Critical Appraisal were used to evaluate the quality of RCT, cohort studies and case series. Meta-analysis and Poisson regression were conducted.

RESULTS

Ten studies in this review included three case series, six cohort studies and one RCT with three low, six moderate risks and one some concerns. Annual failure rates (AFRs) and annual complication rates (ACRs) of direct composite restorations were 0-6.2% and 1.0%-4.2%, respectively. AFRs of indirect restorations were 0%-0.5%. Overall ACRs of indirect restorations fabricated by traditional indirect resin composites, polymer-infiltrated ceramic-network, resin nanoceramics and ceramics were at 1.6%-15.1%, 0.7%-4.8%, 0.5%-5.0% and 0.2%-1.1%, respectively. The estimated AFRs of direct composites, resin nanoceramics and ceramics were 0.64%, 0.13% and 0.04% respectively. Significantly lowest AFRs of ceramic was found after mid-term follow-up with incidence rate ratios of direct composites, resin nanoceramics and ceramics being 1: 0.68 (P = 0.60): 0.001 (P < 0.05). The estimated ACRs of the three materials were 2.16%, 2.14% and 0.62%. Overall AFRs of restorations using different techniques were 0%-0.5%. Overall ACRs of direct and indirect techniques were 1.1%-2.2% and 0.2%-4.8%, respectively. Overall ACRs of hybrid technique were 0.5% to 15.1%. Restoration fracture was the most predominant complication regardless of materials. High appreciation was expressed by patient reported outcomes measures.

CONCLUSIONS

Minimally invasive full-mouth rehabilitation for patients with moderate to severe tooth wear presented good clinical performance apart from traditional indirect resin composite used in posterior teeth.

CLINICAL RELEVANCE

Minimally invasive full-mouth rehabilitation should be strongly advocated for the patients with moderately and severely worn dentition.

Minimally Invasive Fixed Prosthodontics: A Narrative Review

OBJECTIVE

Minimally invasive dentistry is being widely practiced. The center stone is to be as conservative as possible to minimize unnecessary removal of healthy tooth structure. In prosthodontics the patients have generalized and combined nature of diseases. This narrative literature review analyzed available evidence on minimally invasive treatment protocols in fixed prosthodontics and raised awareness on the importance of longevity of treatments and secondary prevention.

OVERVIEW

The long-term clinical survival of ceramic and resin composite materials was reviewed. Loss of tooth vitality after prosthodontic treatment was also explored. And finally, treatment options for patients with severe wear were examined. The search of the literature resulted in evidence of superior survival of ceramic restorations over resin composites. The literature is also clear that ceramic partial coverage inlay and onlay restorations have excellent long-term clinical performance in posterior dentition. Glass ceramic lithium disilicate showed to be an adequate material not only for anterior but also for posterior dentition, including the patients with severe wear.

CONCLUSIONS

Minimally invasive dentistry as applied in fixed prosthodontics needs updates in its concepts to account for secondary prevention and longevity of chosen treatment techniques.

CLINICAL SIGNIFICANCE

This narrative review article critically reviews available evidence on long-term clinical performance of minimally invasive and traditional treatment concepts and materials in fixed prosthodontics. Awareness is raised for secondary prevention and longevity of chosen treatments.

The One-step No-prep technique for non-invasive full-mouth rehabilitation of worn dentition using PICN CAD-CAM restorations: Up to 9-year results from a prospective and retrospective clinical study

OBJECTIVES

To report up to 9-year results of a prospective and retrospective study on non-invasive full-mouth rehabilitation of worn dentition with PICN CAD-CAM restorations using the One-Step No-Prep technique. The secondary objective is to evaluate the influence of restoration thickness on fracture of restorations.

METHODS

A total of 580 Vita Enamic restorations (218 anterior and 362 posterior; 260 monoblock (MO) and 320 multiColor (MC)) in 24 patients were clinically evaluated once a year (up 9 months to 9 years) according to FDI criteria. Patient data and prosthetic parameters were registered. The minimum thickness of restorations was measured in 15 patients.

RESULTS

The Kaplan-Meier survival rate of restorations at 9 years was 98.4 % (100 % for anterior and 96.7 % for posterior) and the success rate was 79.7 %, while the success rate excluding minor chipping requiring only polishing as failure was 86.7 %. Actually, minor chipping was the leading cause of failure and significantly more fractures were observed in the posterior region (9.2 times higher risk), particularly in the first and second molars or when the restoration thickness was less than 0.56 mm. Except for fracture, FDI evaluation showed clinically acceptable results for all restorations, mostly rated as excellent. Results remained consistent over time, including material luster and color, with no staining. MC showed superior esthetics compared to MO. Patient satisfaction was high.

SIGNIFICANCE

The One-Step No-Prep technique exhibits successful long-term outcomes, and PICN (hybrid ceramic) is an appropriate material for this non-invasive treatment of tooth wear. Nevertheless, the minimum thickness of posterior restorations should be 0.6 mm, particularly at occlusal contact points. MultiColor blocks are recommended for esthetics.

Design and Development of Infiltration Resins: From Base Monomer Structure to Resin Properties

The resin infiltration concept is one of the most widely used minimally invasive restorative techniques in restorative dentistry with the most outstanding therapeutic effect, and it is also one of the key research directions in restorative dentistry. "Infiltration resin" is the specialty restorative material for the technology, which is the key factor to success. The specialized restorative material is commonly known as "infiltrant/infiltration resins" "resins infiltrant" "infiltrant" or "resins," which will be consistently referred to as "infiltration resins" throughout the article. The paper aims to provide a comprehensive overview of infiltration resins by introducing the development of their therapeutic mechanisms, basic components, current challenges, and future trends, Based on existing literature, we analyze and compare how changes in the base monomer's structure and ratio affect the effectiveness of infiltration resins, from the material's structure-effective relationship. After compiling the information, the existing solution strategies have been listed to offer substantial support and guidance for future research endeavors.

Minimally invasive glass-ceramic restorations: Clinical and patient-reported outcomes in full-mouth rehabilitations

OBJECTIVES

To evaluate clinical outcomes (restoration survival, technical and biological complications), and patient-reported outcome measures (PROMs) of full mouth rehabilitation with minimally invasive glass-ceramic restorations after up to 12 years of clinical service.

MATERIALS AND METHODS

Twenty individuals (12 females, 8 males) received full-mouth rehabilitation with minimally invasive tooth-supported glass-ceramic restorations during the years 2009 - 2017 and agreed to participate in a follow-up visit. Full dental and periodontal examinations were completed, and the restorations were evaluated according to United States Public Health Service (USPHS) criteria. Kaplan-Meier was used for analysis of the survival time.

RESULTS

The patients received 439 minimally invasive restorations made from lithium disilicate reinforced glass-ceramic (79.7%), feldspathic porcelain (17.5%) and leucite reinforced glass-ceramic (2.7%). Restoration design included occlusal and buccal surface partial coverage restorations (35.3%), full-contour restorations (31.2%), veneers (27.8%), onlays (4.6%) and inlays (1.1%). The mean follow-up time from restoration insertion was 4.5 years (1.5-12.4 years). Five patients lost altogether 13 restorations during the follow-up time. The estimated cumulative Kaplan-Meier 5-year survival rates were 96.6% on the restoration level and 86.4% on the patient level. Major technical complications amounted to 3% (n = 13) of the restorations, including larger chippings (n = 5) and loss of retention (n = 7). Biological complications were observed at a rate of 4.3%. Patients were very satisfied with esthetics (VAS 9.5) and function (VAS 9.3) of the restorations.

CONCLUSIONS

Minimally invasive full-mouth rehabilitation with glass-ceramic restorations resulted in high survival rates, few complications and a high level of patient satisfaction over a mid-term time-period.

CLINICAL SIGNIFICANCE

There is an increasing trend toward minimally invasive restorations, as previous studies indicate that these designs preserve healthy tooth structure, leading to fewer biological complications. The present study demonstrates that minimally invasive restorations can be reliably used in full-mouth rehabilitations.

Rehabilitation of the Worn Dentition With Direct and Indirect Minimally Invasive Concepts-A Systematic Review and Meta-Analysis

OBJECTIVE

To report and compare the survival of minimally invasive direct and indirect restorations of different materials for restoring the worn dentition.

MATERIAL AND METHODS

A systematic search was conducted in six databases: MEDLINE, Web of Science, Scopus, CENTRAL, VHL, and EMBASE. The eligibility criteria of this systematic review used the PICO framework to address the following research question: "In dentate patients with a worn dentition (P), does rehabilitating their lost tooth structure with indirect restorations (I) or direct (C) effect the survival and success of treatment (O)?". Study characteristics, survival rates of the restorations were extracted from each article. No language restrictions were applied. Survival and prevalence estimates were calculated using random-effect models.

RESULTS

The electronic search yielded 5009 entries, resulting in 14 publications selected for full-text analysis. These included 2 RCTs, 7 prospective, and 5 retrospective studies, with a varying level of methodological quality. This included 52% direct and 48% indirect restorations, using varying materials and follow-up periods. The survival of direct composite resin restorations versus indirect manually processed composite resin restorations showed no significant difference (n = 2; OR, 1.79 [95% CI, 0.64-5.05]; p = 0.270). For the prospective articles, the pooled prevalence estimates of the survival restorations were; direct (n = 3; 99% [95% CI, 0.97-1.00]) and; indirect (n = 5; 100% [95% CI, 0.99-1.00]). Lithium disilicate recorded the least amount of failures at 1.8%.

CONCLUSIONS

Although the survival estimates of indirect manually processed and direct composite resins were not significantly different, indirect restorations-especially those made of lithium disilicate ceramic-may offer better survival rates, compared to direct resin restorations in patients with worn dentition.

CLINICAL SIGNIFICANCE

Despite the limited evidence, indirect ceramic restorations appear to be well-suited for long-term treatment of worn dentition, whilst direct composite resin restorations are more suited as an medium-term solution.

Efficacy of Oral Rehabilitation Techniques in Patients With Oral Cancer: A Systematic Review and Meta-Analysis

Oral cancer commonly affects various parts of the oral cavity, including the lips, tongue, gums, palate, and inner cheeks. Oral rehabilitation involves multiple approaches aimed at restoring and improving oral function, esthetics, and overall well-being. This study assessed the functional outcomes and quality of life in patients who underwent rehabilitation following an oral cancer diagnosis. A comprehensive literature search was performed across PubMed, Cochrane Library, Dimensions, ScienceDirect, CINAHL, and Google Scholar databases. The study included patients diagnosed with oral cancer who had undergone oral rehabilitation. Functional outcomes and quality of life were key selection criteria. The methodological quality of the included studies was assessed, and data were systematically extracted and analyzed. A significant relationship was observed between the type of maxillectomy and quality of life, with obturator retention and stability being critical factors. Radiotherapy was found to adversely impact oral function and implant survival rates, with a strong correlation between radiation treatment and reduced implant survival (p < 0.00001). Additionally, dentition and the timing of implant placement were associated with recurrence rates and adverse effects. The findings highlight the crucial role of oral rehabilitation in improving both functional outcomes and quality of life in oral cancer patients. This study underscores the importance of incorporating oral rehabilitation into oral cancer treatment to enhance patient recovery and overall health.

Three-dimensional finite element analysis of occlusal stress on maxillary first molars with different marginal morphologies restored with occlusal veneers

BACKGROUND

There are differences in the research results regarding which edge design of occlusal veneers can achieve the best long-term success rate as a relatively new fixed prosthesis restoration method. Further research is needed. The three-dimensional finite element method was used to conduct stress analysis on occlusal veneers of maxillary first permanent molars with different thicknesses and margin preparation designs. The aim of this study was to provide mechanical research evidence and a reference for exploring standardized clinical protocols for the design of occlusal veneer restorations of maxillary first molars.

METHOD

A 3Shape (Intraoral Scanner) was used to scan the maxillary first molar teeth in vitro, after which 3D printing was carried out. Three different edge designs were applied to identical teeth: straight-beveled finishing line(SFL), chamfer finishing line(CFL), and standard cuspal inclination(SCI). Preparation was carried out with a thickness of 0.5 mm. Using the surface deformation feature, the occlusal veneer was thickened to 0.5 mm and 1.0 mm, and periodontal ligaments were added. They were then placed into the upper and lower jaws and dental arches. Finite element analysis was performed after applying bite force dispersion to the loading area on the mandible following dynamic contact.

RESULTS

(1) As the thickness increased, the maximum Von Mises stress in the occlusal veneers SFL and CFL also increased, while the SCI exhibited the opposite trend. (2). The trend of the maximum Von Mises stress in the adhesive layer decrease gradually with increasing thickness of the occlusal veneer. The stresses of the SFL and CFL is concentrated primarily at the edge position below the functional cusp, resulting in relatively low adhesive stress. However, in the SCI group, the maximum stress at the edge of the adhesive layer exceeds the maximum shear strength of commonly used adhesives.

CONCLUSIONS

Under the experimental conditions, the mechanical properties of the maximum Von Mises stress in the SFL, CFL, and SCI occlusal veneers meet clinical needs. Incorporating the minimally invasive concept of tooth preservation, a thickness of 1.0 mm are optimal for glass ceramic occlusal veneers on maxillary first molars.

Treatment decisions of patients with Class II Division 2 malocclusion and severe tooth wear: a systematic review

BACKGROUND

The treatment strategy for patients with severe tooth wear associated with Class II Division 2 malocclusion remains a major challenge for dental practitioners.

OBJECTIVES

To systematically review and summarize the literature on treatment strategies, restoration procedures and clinical outcomes for Class II Division 2 malocclusion patients with severe tooth wear.

METHODS

A literature review was conducted using Pubmed, Embase, the Cochrane Library, and Web of Science to identify eligible articles. Publications until October 16th, 2023 were searched independently and cross-checked by two researchers.

RESULTS

Of 1513 articles screened, 10 reports detailed treatment processes, including six males and four females aged 34-68 years old. Four articles recorded pre-treatment freeway space (FWS) values ranging from 5 to 9 mm. All ten cases had significant occlusal vertical dimension (OVD) loss and the increase in OVD after treatment ranged from 1 to 7 mm. Pre-prosthetic orthodontic treatment was performed in two cases, in one of which only the maxillary region was orthodontically treated. The most common restorations provided were full coverage restorations. In most cases, temporary restorations were applied before the permanent restorations for eight weeks to six months. Four different sequences of final restoration were proposed. Follow-up ranged from four months to six years and included seven patients, one of them showed symptoms of temporomandibular disorder (TMD).

CONCLUSIONS

A multidisciplinary team (MDT) approach to treatment is recommended. Consideration of pre-prosthetic orthodontic treatment is essential. Commonly used cephalometric measurements for anterior teeth include the interincisal angle and collum angle. The increases in OVD ranging from 1 to 7 mm can be effectively accommodated. Temporary restorations are recommended to accommodate the OVD, and the transition periods of 8 weeks to 6 months help the patients adapted well. Four different sequences for final rehabilitation have demonstrated positive clinical outcomes. Full crown restorations have emerged as the preferred choice for the ultimate restoration of these patients.

Intraoral wear of PICN CAD-CAM composite restorations used in severe tooth wear treatment: 5-year results of a prospective clinical study using 3D profilometry

OBJECTIVES

To evaluate, in a prospective clinical study over 5 years with ex vivo 3D profilometry analyses, the intraoral wear of Polymer-Infiltrated Ceramic Network (PICN) CAD-CAM composite restorations used in severe tooth wear treatment with the One-Step No-Prep technique.

METHODS

192 PICN (Vita Enamic) restorations on molars and premolars were included in a prospective clinical study involving patients treated according to the One-step No-prep protocol (n = 7). All patients showed clinical signs of bruxism. Replicas of restorations on molars and premolars were realized at each evaluation time (baseline and then every year up to 5 years) and scanned to perform 3D profilometry. Baseline and recall scans were superimposed with Geomagic Control software. The mean material wear was calculated for the full occlusal area (FOA) and for the occlusal contact area (OCA), respectively. Clinical evaluation of restorations was performed at recall.

RESULTS

At 5 years, the estimated mean material wear for FOA was inferior to the accuracy threshold of the profilometry measurement chain. For OCA, the estimated mean wear of the material was - 27.97 µm. This material wear was shown to be significantly influenced by time (p < 0.0001) and patient (p = 0.026), while the type of tooth (molar or premolar) had no influence. At 5 years, the survival and the success rates of restorations were 99.48% and 90.62%, respectively.

SIGNIFICANCE

The PICN material exhibits a low wear process in the treatment of severe tooth wear despite the presence of clinical signs of bruxism, and it constitutes a suitable material for the One-step No-prep technique.

Occlusal veneer restoration treatment outcomes of cracked tooth syndrome: A 22.4-month follow-up study

OBJECTIVES

The aims of this clinical study were to investigate success rate, vital pulp survival rate, tooth survival rate and patient-reported masticatory ability by evaluating the pain symptoms and signs of the cracked teeth as well as Index of Eating Difficulty (IED) and Oral Health Impact Profile-14 (OHIP-14) questionnaire after cracked teeth were restored with occlusal veneers.

MATERIALS AND METHODS

27 cracked teeth of 24 patients with cold and/or biting pains without spontaneous/nocturnal pains were recruited in this study. The cracked teeth were restored with occlusal veneers fabricated by lithium disilicate ceramic. Cold test and biting test were used to evaluate pain signs. IED and OHIP-14 questionnaire were used to evaluate masticatory ability. FDI criteria was used to evaluate restorations. The paired Wilcoxon test was used to analyze significant differences of detection rate of pain signs, OHIP scores and IED grade before and after restorations. Kaplan-Meier survival curve was used to describe the success rate, vital pulp survival rate, and tooth survival rate.

RESULTS

27 cracked teeth were restored with occlusal veneers with average of 22.4-month follow-up. Two cracked teeth had pulpitis and pain signs of the other cracked teeth completely disappeared. OHIP total scores were significantly reduced after treatment. Scores of 'pain', 'occlusal discomfort', 'uncomfortable to eat', 'diet unsatisfactory' and 'interrupted meals' reduced significantly after treatment. After treatment, IED grades of 25 vital teeth were significantly lower than those before treatment. FDI scores of 25 restorations except for 2 teeth with pulpitis were no greater than 2. The 12 months accumulated pulp survival rate of the cracked teeth was 92.6%. The 12 months accumulated tooth survival rate was 100%. The success rate at the latest recall was 92.6%.

CONCLUSION

Occlusal veneer restorations with success rate of 92.6% and the same pulp survival rate might be an effective restoration for treating the cracked teeth.

CLINICAL RELEVANCE

The occlusal veneer restorations might be an option for treating the cracked teeth when cracks only involve enamel and dentin, not dental pulp.

5.5-year-survival of CAD/CAM resin-based composite restorations in severe tooth wear patients

OBJECTIVES

Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years.

METHODS

Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05).

RESULTS

568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7).

SIGNIFICANCE

Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Influence of ceramic thickness and dental substrate on the survival rate and failure load of non-retentive occlusal veneers after fatigue

OBJECTIVE

To investigate the effect of ceramic thickness and dental substrate (enamel vs. dentin/enamel) on the survival rate and failure load of non-retentive occlusal veneers.

MATERIALS AND METHODS

Human maxillary molars (n = 60) were divided into five test-groups (n = 12). The groups (named DE-1.5, DE-1.0, DE-0.5, E-1.0, E-0.5) differed in their dental substrate (E = enamel, DE = dentin/enamel) and restoration thickness (standard: 1.5 mm, thin: 1.0 mm, ultrathin: 0.5 mm). All teeth were prepared for non-retentive monolithic lithium-disilicate occlusal veneers (IPS e.max Press, Ivoclar). Restorations were adhesively cemented (Syntac Classic/Variolink II, Ivoclar) and exposed to thermomechanical fatigue (1.2 million cycles, 1.6 Hz, 49 N/ 5-55°C). Single load to failure was performed using a universal testing-machine. A linear-regression model was applied, pairwise comparisons used the Student-Newman-Keuls method (p < 0.05).

RESULTS

Three dentin-based occlusal veneers (one DE-1.0, two DE-0.5) revealed cracks after fatigue exposure, which corresponds to an overall-survival rate of 95%. Load to failure resulted in the following ranking: 2142 N(DE-0.5) > 2105 N(E-1.0) > 2075 N(E-0.5) > 1440 N(DE-1.5) > 1430 N(DE-1.0). Thin (E-1.0) and ultrathin enamel-based occlusal veneers (E-0.5) revealed high failure loads and surpassed the standard thickness dentin-based veneers (DE-1.5) significantly (p = 0.044, p = 0.022).

CONCLUSION

All tested monolithic lithium disilicate occlusal veneers obtained failure loads above physiological chewing forces. Thin and ultrathin enamel-based occlusal veneers outperformed the standard thick dentin-based occlusal veneers.

CLINICAL SIGNIFICANCE

Minimally invasive enamel-based occlusal veneer restorations with non-retentive preparation design may serve as a conservative treatment option.

Mechanical properties of 3D-printed and milled composite resins for definitive restorations: An in vitro comparison of initial strength and fatigue behavior

OBJECTIVE

To evaluate the flexural strength and fatigue behavior of a novel 3D-printed composite resin for definitive restorations.

MATERIALS AND METHODS

Fifty disc-shaped specimens were manufactured from each of a nanohybrid composite resin (NHC), polymer-infiltrated ceramic network (PICN), and 3D-printed composite resin (3D) with CAD-CAM technology. Biaxial flexural strength (σin ) (n = 30 per group) and biaxial flexural fatigue strength (σff ) (n = 20 per group) were measured using piston-on-three-balls method, employing a staircase approach of 105  cycles. Weibull statistics, relative-strength degradation calculations, and fractography were performed. The results were analyzed with 1-way ANOVA and Games-Howell post hoc test (α = 0.05).

RESULTS

Significant differences in σin and σff among the groups (p < 0.001) were detected. The NHC group provided the highest mean ± standard deviation σin and σff (237.3 ± 31.6 MPa and 141.3 ± 3.8 MPa), followed by the PICN (140.3 ± 12.9 MPa and 73.5 ± 9.9 MPa) and the 3D (83.6 ± 18.5 MPa and 37.4 ± 23.8 MPa) groups. The 3D group exhibited significantly lower Weibull modulus (m = 4.7) and up to 15% higher relative strength degradation with areas of nonhomogeneous microstructure as possible fracture origins.

CONCLUSIONS

The 3D-printed composite resin exhibited the lowest mechanical properties, where areas of nonhomogeneous microstructure developed during the mixing procedure served as potential fracture origins.

CLINICAL SIGNIFICANCE

The clinical indications of the investigated novel 3D-printed composite resin should be limited to long-term provisional restorations. A cautious procedure for mixing the components is crucial before the 3D-printing process, since nonhomogeneous areas developed during the mixing could act as fracture origins.

Functional and aesthetical full-mouth rehabilitation of a patient with severely worn dentition and deep bite using minimally invasive approach in current vertical dimension: A 3-year follow-up

Key Clinical Message

Regaining restorative space for fullmouth reconstruction in a patient with deep bite and worn dentition by conservative approach in current vertical dimension and also using minimally invasive concept is recommended.

Abstract

Full mouth reconstruction of a deep bite patient with severely worn dentition is a challenging situation for the prosthodontists. This study represents minimally invasive procedures in mentioned condition without increasing vertical dimension. After 3 years of follow up no complication was observed.

Interblock and intrablock homogeneity of CAD-CAM composites mechanical properties

The purpose of this study was to characterize the homogeneity of the mechanical properties of commercial CAD-CAM composites between different blocks of the same material (interblock homogeneity) and within each block between the internal and external parts (intrablock homogeneity). Tetric CAD (TET); Katana Avencia (KAT); Cerasmart 270 (CER); Grandio (GRN) and Vita Enamic (ENA) were tested for flexural strength (σf), flexural modulus (Ef), flexural load energy (Ur) and hardness (HV). Results showed significant differences in interblock homogeneity of σf, Ef and Ur for TET, KAT, CER and ENA. In addition, significant differences in interblock homogeneity of HV for TET, CER and GRN were found. Moreover, significant differences in intrablock homogeneity of σf, Ef and Ur were found for KAT, CER, GRN and ENA, as well as for HV of all the tested materials except CER. Weibull modulus was highest for GRN, followed by ENA, KAT, TET then CER.

Advances in Preventive and Therapeutic Approaches for Dental Erosion: A Systematic Review

This review discusses both preventive measures and clinically implemented therapy procedures that have been developed recently for the prevention and treatment of tooth erosion.

METHODS

The databases PubMed, Scopus, and Web of Science were used for a thorough search. Studies on the prevention and treatment of dental erosion that were conducted in English and used in vitro were among the inclusion criteria.

RESULTS

The search turned up 391 papers in total, with 34 of those publications matching the requirements for inclusion. Varnishes, toothpastes, and solutions containing fluoride and other substances were used as preventive measures.

CONCLUSIONS

Dental erosion is a significant issue, and taking preventative steps is crucial to lessening the disease's spread and its effects. Interventions based on fluoride seem to be successful at halting erosion and encouraging remineralization. To effectively address severe tooth erosion, therapeutic methods, including composite restorations, prosthetic crowns, and veneers, are available. Dental erosion causes aesthetic and functional issues that are best addressed with less invasive treatments like direct composite restorations. To improve and broaden the range of available treatments for this common dental issue, additional research and development are required.

Risk factors of tooth wear in permanent dentition: A scoping review

BACKGROUND

Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors.

OBJECTIVE

This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement.

METHODS

The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies.

RESULTS

2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored.

CONCLUSIONS

TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches.

Conventional Versus Minimally Invasive Veneers: A Systematic Review

This systematic review aimed to synthesize and analyze a collection of studies focused on comparing conventional veneers (CVs) and minimal or no-preparation veneers (MPVs) within the domain of prosthodontics. The review sought to explore various attributes, techniques, outcomes, and considerations associated with these two approaches. The key aspects investigated included esthetics, longevity, periodontal health, patient satisfaction, structural influences such as microleakage and marginal fit, cement thickness, and color stability. A systematic literature search was conducted to identify relevant studies published up to the present date. Studies meeting specific inclusion and exclusion criteria were selected for review. Studies pertaining to various methodologies were identified initially as part of the strategy and bias assessment was performed to determine the credibility of their assessments before inclusion in this review. Four comparative assessments gleaned from the selected studies provided a comprehensive overview of the strengths and limitations associated with CVs and MPVs. MPVs demonstrated advantages such as enhanced survival rates and extended mean success periods, implying their potential as viable long-term restorative options. Meticulous patient management and optimal preparation techniques emerged as crucial factors influencing successful outcomes. Structural attributes, including microleakage and marginal fit, varied depending on the preparation techniques employed. Moreover, considerations related to color changes in veneers underscored the intricate interplay between material properties and fabrication methods. The insights underscore the significance of patient-centric care, precision preparation methodologies, and material choices in guiding successful outcomes. However, the diverse methodologies and constraints of certain studies warrant careful interpretation. This study accentuates the potential for future research directions, interdisciplinary collaboration, and the advancement of evidence-based practices within veneer dentistry.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Fracture load and failure mode of semi-direct resin composite occlusal veneers: Influence of design and mechanical cycling

AIMS

To evaluate the influence of the type of preparation and mechanical cycling on the fracture load and failure mode of semi-direct posterior resin composite restorations.

METHODS

In total, 70 healthy third molars were used; 10 belonging to the control group (C - unprepared teeth) and 60 teeth prepared and restored with nanoparticle resin composite, divided into 3 groups (n = 20): O - exclusively occlusal preparation (Table Top); OV - occlusal preparation with buccal extension (Veneerlay); OVP - Occlusal preparation with chamfer on the proximal and buccal-lingual/palatal surfaces (Overlay). The preparations were performed with diamond burs with a thickness of 1 mm. The restorations were made with nanoparticulate resin composite (Filtek Z350 XT) and subsequently received additional polymerization (thermoprocessing). Cementation was performed with the use of universal adhesive system (Single Bond Universal) on dental substrate and dual resin cement (RelyX ARC). Half of the teeth in each group (n = 10) were submitted to mechanical cycling, simulating 6 months of clinical service (5 × 105 fatigue cycles), under dynamic loading of 130 N, at a frequency of 2Hz. Fracture load tests were performed in a universal testing machine with a 200 kgf load cell. Failure mode was classified using scores. Generalized linear models and Fisher Exact tests were applied to the data (significance level of 5%).

RESULTS

There were no significant differences between the types of preparation (p = 0.9435), or relative to cycling (p = 0.3764). The Fisher Exact Test showed a significant association between the groups and the type of failure (p = 0.0006), with preparations O (with cycling) and OVP (with and without cycling) exhibiting most failures with restoration fractures without involvement of the dental remnant.

CONCLUSIONS

Semi-direct restorations showed resistance to fracture load similar to that of healthy teeth and were capable of withstanding functional masticatory loads. The type of preparation influenced the failure mode of teeth. The Table Top and Overlay types of preparations were those had fewer catastrophic failures, suggesting that since they are more conservative preparations, they made it possible for the tooth to receive a new restorative procedure in the future in cases of failures.

Survival and debonding resistance of posterior cantilever resin-bonded fixed dental prostheses for moderately and severely worn dentition during thermomechanical loading

OBJECTIVES

The purpose of this study was to investigate the survival rate, the debonding resistance, and the failure modes of different occlusal veneer designs when used as a retainer for posterior cantilever, resin-bonded fixed dental prostheses (RBFDPs) at two tooth wear levels.

METHODS

Four test groups were assigned: two groups with occlusal-proximal preparation (PT1 and PT2 for grade 2 and 3 wear), and two groups for occlusal-proximal and lingual preparation (PLT1 and PLT2 for grade 2 and 3 wear) Monolithic zirconia ceramic (3Y-TZP) RBFDPs were luted with an adhesive bonding system (Panavia V5). The specimens underwent a chewing simulation for 1.200.000 cycles with a load of 5 kg and thermocycling for 7500 cycles between 5 °C and 55 °C. The surviving restorations were debonded under quasi-static conditions. The results were analyzed with ANOVA.

RESULTS

The specimens exhibited a 100 % survival rate after thermomechanical fatigue loading. The debonding resistance was statistically significant higher for group PLT1 than for group PT1 (P = 0.004), and higher for group PT2 than group PT1 (P ≤ 0.001). However, the debonding resistance showed no statistically significant difference between groups PT2 and PLT2 (P = 0.343), and groups PLT1 and PLT2 (P = 0.222). Groups PT1 and PT2 showed favorable failure modes in 62.5 % and 0.00 % of the specimens, respectively. While groups PLT1 and PLT2 presented 25 % favorable failure modes.

SIGNIFICANCE

Occlusal veneers showed promising results as a retainer for cantilever RBFDPs. The lingual extension might increase debonding resistance. Nevertheless, conservative designs with lingual and proximal bevels are to be recommended, irrespective of the level of tooth wear.

Influence of dental prophylaxis procedures on the tooth veneer interface in resin-based composite and polymer-infiltrated ceramic veneer restorations: an in vitro study

OBJECTIVES

The aim of this study was to investigate the influence of dental prophylaxis cleaning procedures and artificial aging on veneers in human teeth. The external marginal and internal tooth veneer as well as the restoration surfaces were examined.

MATERIAL AND METHODS

Thirty-two extracted premolars were restored with resin-based composite (RBC) and polymer-infiltrated ceramic network (PICN) veneers. Artificial aging by alternating thermocycling and subsequent prophylaxis procedure (glycine-based powder air polishing or ultrasonic scaling) was conducted for five consecutive cycles. The external marginal interface was examined by height profile measurements and the internal interface was investigated using micro X-ray computed tomography. In addition, the surface texture of the veneer surface was analyzed using confocal laser scanning microscopy.

RESULTS

The application of both prophylaxis procedures resulted in a deepening of the marginal interface (10 µm ± 8 µm) for materials. Furthermore, the internal interface of PICN restorations showed marginal gaps after both treatments and artificial aging (16 µm ± 3 µm). In contrast to the RBC specimens, a significant increase in surface roughness was identified for PICN veneers after ultrasonic scaling.

CONCLUSIONS

The marginal and internal interface regions in veneers fabricated from PICN and RBC were affected by prophylaxis procedures. Furthermore, it may result in increased veneer surface roughness, especially in PICN and after ultrasonic scaling, which might affect bioadhesion and longevity.

CLINICAL RELEVANCE

After dental prophylaxis procedures, examination of the marginal and the internal interface as well as the veneer surface provides a precise insight into damage mechanisms and offers an assessment of longevity.

Bruxism as a new Risk Factor of Musculo-Skeletal Disorders?

OBJECTIVES

Musculoskeletal disorders (MSDs), particularly neck and low back pain, constitute a major public health issue worldwide with a heavy morbidity and economic impact. However, the relationships between the stomatognathic system and MSDs are subjected to debate, data sorely lacking. The study objective was to investigate the association between bruxism (BR) and MSDs. Secondary objective includes the study of the association between tooth wear (TW) and MSDs.

METHODS

This is a cross-sectional study on 425 participants frequenting a university dental clinic. The presence of MSDs was evaluated with the standardized Nordic questionnaire. The sleep and awake BR assessments were based on clinical examination and self-report. TW was measured with the BEWE index. Socio-demographic factors, medical history, life habits and stress were analyzed as potential confounding variables.

RESULTS

91% of patients reported at least one MSD during the preceding 12 months and 78.8% were diagnosed as bruxers. In multivariate analyses, BR was associated with a 5-fold increased risk of prevalent MSD (OR=5.88 (2.7-12.5), p<0.0001). Regarding TW, for a one-point increase in anterior BEWE score, the risk to present an MSD was increased by 53% (OR=1.53 (1.12-2.08), p=0.0076). Moreover, BR was independently associated with neck, shoulder, upper back, low back, hip & thigh and knee MSDs. Anterior TW was independently associated with neck, low back and hip & thigh MSDs, and global TW with knee MSDs.

CONCLUSIONS

BR and TW were shown to be associated with MSDs. The cause-and-effect relationships between those factors needs to be analyzed to optimize prevention and therapeutic care.

CLINICAL SIGNIFICANCE

Results suggest that the body is a whole, a balanced muscular system, where every part constitutes a link of the chain. MSDs management and prevention may require a multidisciplinary team approach and future perspectives include defining the dentist's role in this context, particularly with respect to BR diagnostic and treatment.

Clinical outcomes and influence of material parameters on the behavior and survival rate of thin and ultrathin occlusal veneers: A systematic review

PURPOSE

Various oral rehabilitation approaches are available for severely worn dentition. However, evidence-based guidelines for permanent treatment are limited. This review aims to investigate clinical observational findings and compare in-vitro outcomes of thin and ultrathin occlusal veneers using different materials and approaches.

METHODS

An electronic search of online databases, such as PubMed (MEDLINE), BioMed Central (BMC), Cochrane, and Scopus, was performed for the 2009 - Jun 2021 period, following the PRISMA 2020 criteria. The reports sought for retrieval were all the articles evaluating the clinical outcomes of permanent full-mouth rehabilitation, and all in-vitro records that investigated and compared fracture strength, survival rate, and modes of failure of ultrathin (0.3 - 0.6 mm), thin (0.5 - 0.8 mm), and thick (0.8-1.5 mm) occlusal veneer restorations, with regard to the available indirect restorative materials. The Newcastle Ottawa risk of bias criteria was used to judge the clinical studies and a modified consort statement was used for the evaluation of in-vitro studies. The data of the included studies were extracted and grouped based on the similarity of the outcomes and study protocols. Data heterogeneity determined the qualitative and quantitative grouping of the results.

RESULTS

Two clinical and 17 in-vitro studies were included. Data exhibited heterogeneity within the materials, variables, testing protocols and observation periods. Therefore, only qualitative synthesis of the results was feasible. Clinically used 1 mm lithium disilicate overlays and ultrathin one-step no-prep polymer infiltrated ceramic network (PICN) occlusal veneers exhibited very high success and survival rates. The analysis of in-vitro studies exhibited variable survival rates and fracture load values, based on materials, thickness, and restorative approaches used.

CONCLUSIONS

Within the limitations of this systematic review, it can be concluded that the clinical outcomes of thin and ultrathin occlusal veneers/overlays are auspicious. In-vitro experimental results support the usage of the thin and ultrathin occlusal veneers.

Pressable lithium disilicate ceramic versus CAD/CAM resin composite restorations in patients with moderate to severe tooth wear: Clinical observations up to 13 years

OBJECTIVE

To report the long-term clinical survival and failure rates of single-tooth restorations made of pressable lithium disilicate ceramics (LS₂ ) and CAD/CAM resin composite (RC) by two separate clinical observations.

MATERIALS AND METHODS

Twenty-one patients (12 female, nine male) were treated with 436 minimally invasive single-tooth restorations made of 274 pressed LS₂ (n = 12; posterior: monolithic IPS e.max Press; anterior: IPS e.max Ceram veneered, Ivoclar) or 162 milled from RC (n = 9; monolithic exp. CAD/CAM resin composite, Ivoclar). The mean age of patients was 44.1 ± 9.3 years and the mean observation time was 86.2 ± 13.5 months (7.7 ± 1.1 years), with 8.5 ± 2.7 years for LS2 and 6.7 ± 0.5 years for RC. All restorations were observed for technical/biological failures using the modified criteria of the United States Public Health Service (USPHS). Collected data were analyzed using Kaplan-Meier survival analysis and log-rank test (α < 0.025).

RESULTS

The 274 LS₂ restorations showed a survival of 100% and a total failure rate of 5.5%. The 162 RC restorations showed a survival of 100% and a total failure rate of 25.3%. RC restorations exhibited more material fractures (p = 0.020) and higher discoloration rates (p < 0.001).

CONCLUSIONS

Pressed LS₂ single-tooth restorations showed lower long-term failure rates than restorations made of RC.

CLINICAL SIGNIFICANCE

Despite the limitations of the clinical observations, single-tooth restorations of both materials can be recommended for permanent use in patients with severe tooth wear.

Incidence of endodontic therapy after complete or partial coverage glass-ceramic restorations with a follow-up time of over 30 years: A prospective clinical study

STATEMENT OF PROBLEM

Long-term clinical data are lacking on the comparison of the incidence of endodontic therapy in adhesively luted complete and partial coverage glass-ceramic restorations, as well as on the effect of technique and clinical variables.

PURPOSE

The purpose of this prospective clinical study was to assess the long-term incidence of teeth requiring endodontic therapy after receiving either complete or partial coverage glass-ceramic restorations.

MATERIAL AND METHODS

Participants requiring single anterior complete, posterior complete, or posterior partial (inlay or onlay) coverage restoration, or a combination of these on a vital tooth were recruited from a clinical private practice. Only the participants who chose glass-ceramic partial and complete coverage restorations without the need of endodontic therapy were included in the study. The overall clinical performance of these glass-ceramic restorations was assessed by clinical factors determined at recall. The effect of various clinical parameters (type of restoration, dental arch, tooth position in the dental arch, age and sex of participant, and ceramic thickness) was evaluated by using Kaplan-Meier survival curves to account for attrition bias and other reasons for failure. The statistical significance of differences between parameters was determined by using the log rank test (α=.05).

RESULTS

A total of 1800 participants requiring 4511 glass-ceramic anterior and posterior restorations were evaluated. The mean age of the participants at the time of restoration placement was 62 (range 20 to 99 years, 710 men and 1090 women). Of 4511 restorations, 1476 were anterior complete coverage, 2119 posterior complete coverage, and 916 posterior partial coverage. Endodontic therapy after restoration placement was needed for 76 restorations (10 anterior complete, 50 posterior complete, and 16 posterior partial). The total time at risk was 50 436 years providing an estimated need for endodontic therapy risk of 0.15% per year. The estimated 35-year cumulative survival was 97.36%. The majority of endodontic treatments (67%, 52/76) occurred in the first 5 years. The estimated cumulative survival of anterior complete coverage, posterior complete coverage, posterior partial inlay, and posterior partial onlay restorations was 98.89% (n=1476, 10 endodontic treatments), 96.38% (n=2119, 50 endodontic treatments), 96.78% (n=553, 11 endodontic treatments), and 98.53% (n=363, 5 endodontic treatments), respectively. Statistically significant differences occurred between anterior complete coverage, posterior complete coverage, and posterior partial coverage inlay restorations, with a higher incidence in posterior complete coverage and posterior partial inlay restorations (P<.05). First molars had the highest rate of endodontic therapy after restoration in both arches. Age and restoration thickness were significant factors, recording statistically higher number of endodontic treatments in participants >52 years and restorations with all surfaces ≥1 mm (P<.05). Other clinical variables, dental arch and sex of the participants, were not significantly related to endodontic treatments (P>.05).

CONCLUSIONS

The clinical performance of 4511 units over 30 years in service was excellent, with the estimated cumulative survival of 97.36%. Posterior complete coverage and posterior partial inlay restorations had a significantly higher need for endodontic therapy than anterior complete coverage restorations. Their overall clinical performance relative to endodontic treatment was excellent with a cumulative survival of 96.38% and 96.78% over 30 years. There was no difference in the endodontic treatment rate between posterior complete and partial coverage restorations. Thickness of the restoration affected the endodontic treatment rate, with ≥1 mm resulting in higher incidence. The age of the participants influenced the endodontic treatment rate, with higher incidence in the >52-year age group. Other confounding clinical variables did not have a significant effect on the endodontic treatment rate.

Treatment of Tooth Wear Using Direct or Indirect Restorations: A Systematic Review of Clinical Studies

Tooth wear is considered a well-developed issue in daily clinical practice; however, there is no standard protocol for treatment. The aim of this manuscript was to systematically review the literature to evaluate the clinical outcomes of direct or indirect restorations for treating tooth wear. A literature search was conducted through the PubMed MedLine, Scopus, ISI Web of Science, Scielo, and EMBASE databases up to 29 April 2022. Clinical studies evaluating the clinical performance of direct or indirect restorations for treating tooth wear for a minimum follow-up of 6 months were included in the review. A total of 2776 records were obtained from the search databases. After full-text reading, 16 studies were included in the qualitative analysis. Considering the high heterogenicity of the studies included, a meta-analysis could not be performed. All studies included the rehabilitation of anterior and posterior teeth with extensive wear, using both indirect and direct restorations for a maximum follow-up of 10 years. Restoration materials included ceramo-metal crowns, full gold crowns, lithium disilicate ceramic, zirconia, polymer infiltrated ceramic networks, and resin composites. Most of the reports assessed the survival rate of the restorations and the clinical features using the United States Public Health Service (USPHS) Evaluation System criteria. Contradictory discoveries were perceived concerning the type of restoration with better clinical performance. Considering the current literature available, there is no evidence in the superiority of any restoration technique to ensure the highest clinical performance for treating tooth wear.

Rehabilitation of a deep bite patient with worn dentition using minimally invasive approach: A 3-year follow-up

Full mouth rehabilitation of severely worn teeth represents a challenging situation for dental clinicians. This case report describes the minimally invasive interdisciplinary approach for treatment of severely worn dentition with a loss of vertical dimension of occlusion. After 3 years of follow-up, no complication was observed.

Wear behavior of a microhybrid composite vs. a nanocomposite in the treatment of severe tooth wear patients: A 5-year clinical study

OBJECTIVE

This study aimed to compare the wear behavior of a microhybrid composite vs. a nanocomposite in patients suffering from severe tooth wear.

METHODS

A convenience sample of 16 severe tooth wear patients from the Radboud Tooth Wear Project was included. Eight of them were treated with a microhybrid composite (Clearfil APX, Kuraray) and the other eight with a nanocomposite (Filtek Supreme XTE, 3M). The Direct Shaping by Occlusion (DSO) technique was used for all patients. Clinical records were collected after 1 month (baseline) as well as 1, 3 and 5 years post-treatment. The maximum height loss at specific areas per tooth was measured with Geomagic Qualify software. Intra-observer reliability was tested with paired t-tests, while multilevel logistic regression analyses were used to compare odds ratios (OR) of "large amount of wear".

RESULTS

Intra-observer reliability tests confirmed that two repeated measurements agreed well (p > 0.136). For anterior mandibular teeth, Filtek Supreme showed significantly less wear than Clearfil APX; in maxillary anterior teeth, Clearfil APX showed significantly less wear (OR _material = 0.28, OR _{jaw position} = 0.079, p < 0.001). For premolar and molar teeth, Filtek Supreme showed less wear in bearing cusps, whereas Clearfil APX showed less wear in non-bearing cusps (premolar: OR _material = 0.42, OR _{bearing condition} = 0.18, p = 0.001; molar: OR _material = 0.50, OR _{bearing condition} = 0.14, p < 0.001).

SIGNIFICANCE

Nanocomposite restorations showed significantly less wear at bearing cusps, whereas microhybrid composite restorations showed less wear at non-bearing cusps and anterior maxillary teeth.

Randomized controlled trial on the performance of direct and indirect composite restorations in patients with severe tooth wear

OBJECTIVE

The study aimed to evaluate survival and failure behavior of Direct Composite Restorations (DRC) and Indirect Composite Restorations (ICR) on molars and anterior teeth, in a Randomized Controlled Trial (RCT).

METHODS

Patients with generalized severe tooth wear were included, and randomly assigned to one of 2 protocols: (1) DCR: All teeth were restored with directly applied micro-hybrid composite restorations (Clearfil AP-X, Kuraray) for load bearing areas and nano-hybrid composite restorations (IPS Empress Direct, Ivoclar Vivadent) for buccal veneers; (2) ICR: First molars were restored with indirect composite 'tabletop' restorations and maxillary anterior teeth were restored with indirect palatal veneer restorations (Clearfil Estenia C&B, cemented with Panavia F, Kuraray). Remaining teeth were restored directly. Restorations were evaluated after 3 years, focusing on clinical acceptability. Statistical analysis was performed using Kaplan Meier curves, Annual Failure Rates (AFRs), and univariate Cox regression analyses (p < 0.05).

RESULTS

41 patients (age: 36.6 ± 6.6y) were evaluated after 3 years (40.0 ± 2.2 m). 408 restorations on first molars and palatal veneers on maxillary anterior teeth were part of this RCT, with 220 DCRs and 188 ICRs. No differences in survival between treatment modality for palatal veneers for any failure criteria were found. Tabletop restorations on first molars showed a considerable higher failure rate for ICR compared to DCR (p = 0.026, HR: 3.37, 95%CI = 1.16-9.81).

SIGNIFICANCE

In this RCT, directly applied composite restorations showed superior behavior compared to the indirect composite restorations, when used in the molar region.

Longevity of Polymer-Infiltrated Ceramic Network and Zirconia-Reinforced Lithium Silicate Restorations: A Systematic Review and Meta-Analysis

The purpose of this study was to systematically review the existing literature to assess the clinical survival and success of PICN and ZLS indirect restorations as the clinical evidence for them remains lacking. PubMed, SCOPUS, Embase, Cochrane Library, Web of Science, LILACs, and SciElo databases were searched from 1 January 2000 to 1 February 2021. Clinical trials and cohort studies published in English were included while case studies, case series, and in vitro studies were excluded. Results were analyzed qualitatively and a meta-analysis using a random effects model was performed. A strength of recommendation taxonomy (SORT) analysis was conducted and risk of bias (RoB) was assessed using the Newcastle-Ottawa scale and Cochrane RoB tools. An electronic search through the databases yielded 2454 articles, of which 825 remained after duplicate removal. Five studies investigating PICN and four investigating ZLS indirect restorations remained after assessing for eligibility. The overall survival rate of PICN over 1 year was 99.6% and 99.2% over 2 years. The overall survival rate of ZLS over 1 year was 99%. The main mode of failure for both materials was catastrophic fracture. One study had a high RoB, four had a moderate RoB, and four had a low RoB. Both materials demonstrated moderate strength of recommendation at a level 2 evidence for all studies based on SORT analysis. PICN and ZLS show promising short-term clinical performance as full and partial coverage indirect restorations, but longer follow-up studies are required to confirm their long-term performance.

Endocrowns Clinical Performance and Patient Satisfaction: A Randomized Clinical Trial of Three Monolithic Ceramic Restorations

PURPOSE

The purpose of this randomized, double-blind, clinical trial was to assess the survival of endocrowns made from three different monolithic ceramic materials, and to evaluate patient satisfaction.

MATERIALS AND METHODS

Fifty-three patients (sixty root canal treated molar teeth) were enrolled. Teeth were prepared to a flat butt-joint margin and randomly divided between three material groups: lithium disilicate-reinforced glass-ceramic, monolithic zirconia and polymer infiltrated hybrid ceramic. Predefined cementation protocols were used. Clinical assessment using modified United States Public Health Service (USPHS) criteria was carried out after two years by two independent clinicians blinded to the material used. Radiographic examination was conducted to check for the presence of caries, excess cement, and periapical infection. Statistical analysis was performed using the Kruskal Wallis and Wilcoxon signed-rank tests as well as the Kaplan-Meier survival estimate.

RESULTS

Forty-eight patients were available for assessment after 2 years (recall rate 90.6%). The overall Kaplan-Meier survival estimate among all groups was 90.9% with no statistically significant difference between the groups (p = 0.17). Three zirconia endocrowns debonded after 9, 10 and 13 months (82.4% survival rate), while 2 hybrid ceramic endocrowns chipped/fractured (89.5% survival rate). Lithium disilicate endocrowns had a 100% survival rate. The Kruskal Wallis test revealed no statistically significant difference between the groups in the USPHS criteria ratings and the radiographic assessment (P>0.05). Patient satisfaction ranged from 82.3% in the zirconia group to 100% in both the lithium disilicate and hybrid ceramic groups.

CONCLUSIONS

Endocrowns provide a predictable option for the restoration of endodontically treated molar teeth in the short term. Lithium disilicate-reinforced ceramic had fewer complications and required less intervention compared with zirconia and hybrid ceramics. Long-term follow-up is required to substantiate these study results.

Needs for re-intervention on restored teeth in adults: a practice-based study

OBJECTIVES

Evaluate the need for re-intervention on dental coronal restorations in adults seen in a network of general dental practitioners (ReCOL).  MATERIALS AND METHODS: This observational, cross-sectional, multicenter study involved 40 practitioners and 400 patients. Coronal restoration failures (needing re-intervention for unsatisfactory outcomes) were assessed with a simplified rating scale of seven criteria from the FDI World Dental Federation. The oral health status, the risk factors, and Oral Health Impact Profile-14 were also examined. Previous restoration characteristics (extent, technique, material) were analyzed according to the need for re-intervention (yes/no), the age group, and the risk profile. Qualitative variables were compared between "re-intervention" and "no re-intervention" group using Fisher exact test.

RESULTS

The need for re-intervention was estimated at 74% (95% CI: 70; 79); it increased with age (49 to 90%), unfavorable risk profile (82 vs. 62%), and extent of the filling (32, 39, 44, and 44% on 1, 2, 3 surfaces, and crowns, respectively). More posterior than anterior teeth were restored (median per patient: 6 vs. 1) or needed re-intervention (median per patient: 1 vs. 0).

CONCLUSIONS

The needs for re-intervention in adults are still high within a context of ever-changing materials and techniques, simplified and rationalized decision-makings, and demands for patient involvement.

CLINICAL RELEVANCE

Meeting these needs requires the following: (i) consensus definitions and assessment methods for "failure" and (ii) reliable feedbacks on materials, procedures, and satisfaction. Building large and detailed databases fed by networks of motivated practitioners will help analyzing complex success/failure data by artificial intelligence and guiding treatment and research.

Dental software classification and dento-facial interdisciplinary planning platform

OBJECTIVE

Despite all advantages provided by the digital workflow, its application in clinical practice is still more focused on device manufacturing and clinical execution than on treatment planning and communication. The most challenging phases of treatment, comprehensive planning, diagnosis, risk assessment, and decision-making, are still performed without significant assistance from digital technologies. This article proposes a new dental software classification based on the digital workflow timeline, considering the moment of patient's case acceptance as key in this classification, and presents the ideal software tools for each phase.

CLINICAL CONSIDERATIONS

The proposed classification will help clinicians and dental laboratories to choose the most appropriate software during the treatment planning phase and integrate virtual plans with other software platforms for digitally guided execution. A dento-facial interdisciplinary planning platform virtually simulates interdisciplinary clinical procedures and assists in the decision-making process.

CONCLUSIONS

The suggested classification assists professionals in different phases of the digital workflow and provides guidelines for improvement and development of digital technologies before treatment plan acceptance by the patient.

CLINICAL SIGNIFICANCE

Three-dimensional interdisciplinary simulations allow clinicians to visualize how each dental procedure influences further treatments. With this treatment planning approach, predictability of different procedures in restorative dentistry, orthodontics, implant dentistry, periodontal, and oral maxillofacial surgery is improved.

Orthodontic-assisted one step- no prep technique: A straightforward and minimally-invasive approach for localized tooth wear treatment using polymer-infiltrated ceramic network CAD-CAM prostheses

OBJECTIVES

To introduce a minimally invasive and simple ortho-pros approach for localized tooth wear treatment.

CLINICAL CONSIDERATIONS

Four patients with localized anterior and/or posterior tooth wear were treated. Occlusal analyses were performed, and localized wax-up or digital setup were designed based on estimated tissue loss. No-prep anterior and posterior partial-coverage polymer-infiltrated ceramic network (PICN, Vita Enamic) restorations (eg, palatal and occlusal veneers) were computer-aided designed and manufactured (CAD-CAM), tried in, and bonded in supraocclusion, creating a posterior open bite. Then, brief partial (three patients) or global (one patient, for anterior teeth alignment request) orthodontic treatment was performed to extrude the posterior teeth and re-establish posterior occlusal contacts. The orthodontic treatment duration was ~2 months for extrusion. Direct composites were performed to mask the labial finish line of palatal veneers. Clinical results were successful after a follow-up of 15, 21, 23, and 47 months, with 100% success rate of PICN anterior restorations and some minor chippings of borders of thin (0.2 mm) posterior occlusal veneers. Patient-reported outcomes were positive.

CONCLUSION

Orthodontic-assisted one step-no prep technique is an advantageous and straightforward evolution of the Dahl concept. PICNs exhibit several advantages in this interdisciplinary approach.

CLINICAL SIGNIFICANCE

New hybrid-ceramic CAD-CAM materials and a collaborative interdisciplinary approach support the evolution of the Dahl concept for conservative treatment of worn dentitions. The orthodontic-assisted one step-no prep technique is predictable, efficient, and well tolerated by patients and conserves tooth structure.