Efficacy of XP-endo instruments in removing 54 month-aged root canal filling material from mandibular molars

Efficacy of root filling removal from aged, minimally instrumented mandibular molars using a retreatment system combination

OBJECTIVE

This study evaluated the efficacy of the ProTaper Universal Retreatment system (PTUR) and XP-endo Finisher R instrument (XPFR) in removing 64-month-old root filling material from minimally-instrumented mandibular molar canals.

METHODS

Forty-eight root canals with Vertucci type II or IV configurations from 30 mandibular molars were instrumented to size 20/.04 taper using Vortex Blue NiTi rotary instruments and irrigated with the GentleWave system. The canals were divided into three groups based on the root filling method: single-cone with AH Plus sealer (SA), single-cone with GuttaFlow 2 sealer (SG), and GuttaCore with AH Plus sealer (GA). Specimens were stored at 100% humidity and 37 °C for 64 months. Retreatment consisted of PTUR instrumentation, followed by XPFR for canals with residual filling material. Micro-computed tomography was used to evaluate the volume of root filling material in the canals after 64 months of obturation, post-PTUR instrumentation, and after the supplementary XPFR approach.

RESULTS

No significant differences were observed in the volume of root filling material among the SA, SG, and GA groups (p > 0.05). After PTUR retreatment, the percentage of filling material removal, or remaining volume, did not significantly differ among the three groups (p > 0.05). However, supplementary XPFR instrumentation significantly reduced the remaining filling material in all groups. The PTUR and XPFR combination was the most effective in the SA and GA groups, followed by the SG group (p < 0.05).

CONCLUSION

The PTUR and XPFR retreatment system combination was more effective in removing root filling material from minimally-instrumented mandibular molars.

CLINICAL SIGNIFICANCE

The combined use of retreatment file systems improves efficacy of retreating minimally-instrumented mandibular molars by reducing residual filling material and enhancing canal cleanliness, with the potential to improve retreatment outcomes.

Evaluation of canal patency and cleanliness following retreatment of bioceramic sealer-obturated root canals using three different irrigant activation protocols

This study evaluated the effectiveness of three different irrigant activation techniques in cleaning and establishing patency during retreatment of root canals obturated with gutta-percha and bioceramic sealer. 60 extracted premolars with oval-shaped canals were instrumented and obturated with gutta-percha and EndosequenceBC sealer using the 'warm hydraulic condensation' technique. The teeth were retreated using Protaper Universal Retreatment and XP-Endo Shaper system and divided into four groups according to the irrigant activation protocol used: control, passive ultrasonic irrigation (PUI), Endovac irrigation (EVI) and XP-Endo Finisher R (XPFR). Apical patency was achieved in all the samples of the XPFR group (100%), which showed a significantly higher success rate compared with the control (73.3%) and EVI groups (73.3%) (p < 0.05). The scanning electron microscopic evaluation revealed significantly cleaner middle and apical third root canals in the PUI and XPFR groups compared with the control group (p < 0.05). These findings suggest that XPFR effectively cleans and establishes patency in root canals filled with bioceramic sealers.

Comparative Analysis of the Efficacy of Various Retreatment File Systems in the Removal of Gutta-Percha in Retreatment Cases and Time Taken During the Procedure: An In Vitro Cone Beam CT Study

Background Removing gutta-percha manually can be a challenging task, especially when addressing densely packed root-filling material, particularly in cases where resin-based sealers are employed for obturation. The use of nickel-titanium (NiTi) rotary instruments not only effectively shapes the root canal but also efficiently removes the endodontic filling from the curved canal during retreatment. Hence, incorporating rotary NiTi instruments in retreatment cases can alleviate fatigue for both patients and operators. Objectives This study aims to compare the efficacy of Neo-Endo retreatment files, R-Endo retreatment files, and K and H files in the removal of endodontic filling material. Additionally, the remnants of gutta-percha in root canals are evaluated using cone beam computed tomography (CBCT). Materials and methods A total of 60 extracted first maxillary molar teeth were selected for this study. Canal preparation was conducted using the step-back method up to an apical size of 40 K-file. The obturation process involved the use of gutta-percha points and AH Plus sealer in a lateral compaction technique. Post-operative CBCT scans were taken. The samples were randomly divided according to the retreatment files used: group I included Neo-Endo retreatment files, group II included R-Endo retreatment files, and group III included conventional K-files and Hedstroem files (H-Files). The retreatment procedure was considered complete when the last instrument easily reached the working-length range and was physically clean. A stopwatch was used to record the time taken by each file to remove the obturating material. T1 represented the total time (including irrigation and change of file) required to reach the apex, while T2 indicated the complete removal of materials from the canal with the last instrument. The overall time recorded (TT) was calculated as T1 + T2. The removal process was analyzed with CBCT scans. Results The Neo-Endo retreatment files removed the filling materials better and more quickly than the other files. Conclusions Despite the presence of residual filling material in all samples, the Neo-Endo retreatment files left the least amount of residual filling material and achieved the shortest completion time.

The Influence of Nickel-Titanium (Ni-Ti) Rotary Instrument Systems on Debris and Smear Layer Formation in Endodontic Procedures: An In Vitro Scanning Electron Microscopy Study

Background Successful endodontic treatment relies on the effective removal of debris and the prevention of smear layer formation within the root canals. The choice of nickel-titanium (Ni-Ti) rotary instrument systems can significantly impact these outcomes. Aim This study aims to evaluate and compare the debris and smear layer formation in root canals of extracted mandibular second premolar teeth following instrumentation with the ProTaper Universal (Dentsply Sirona, Charlotte, NC) (Group II), Twisted File (Kerr Endodontics, Gilbert, AZ) (Group III), and XP Endo (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (Group IV) Ni-Ti rotary instrument systems. Methods In this in vitro study, 60 extracted mandibular second premolar teeth were randomly divided into four groups, each containing 15 teeth. Group I served as the control with no instrumentation. Groups II, III, and IV were instrumented with the ProTaper Universal rotary file, the Twisted File, and the XP Endo file systems, respectively. Debris and smear layer formation were evaluated through scanning electron microscopy (SEM), and photomicrographs were scored using a standardized index. Results Group II (ProTaper) exhibited the highest mean debris and smear layer scores, with values of 3.50 and 2.70, respectively. Group IV (XP Endo) demonstrated the least debris and smear layer formation, with mean scores of 2.65 and 2.08, respectively. Statistical analysis confirmed significant differences among the groups for both debris and smear layer formation. Conclusion The results highlight the practical importance of selecting appropriate Ni-Ti rotary instrument systems to minimize debris and smear layer formation during endodontic procedures. The XP Endo file system showed promise as a favorable choice in this regard, but further clinical research is needed to validate these findings.

Endodontic Retreatment of a Mandibular Second Molar With a C-shaped Root Canal Configuration: A Case Report

Root canal retreatment in mandibular second molars with C-shaped root canal configurations presents notable challenges. This article presents a case of successful root canal retreatment in a mandibular second molar exhibiting this complex configuration. Achieving a successful endodontic outcome in such cases necessitates a comprehensive understanding of the unique root canal anatomy. Moreover, the employment of advanced instruments and techniques is crucial to effectively address the intricacies of the C-shaped root canal system.

An In Vitro Study: Does Adding Iodine Potassium Iodide and Cetrimide to Calcium Hydroxide Paste Enhance Its Antimicrobial Effect Against Oral Biofilms?

Objectives This study aimed to evaluate the antibiofilm effect of calcium hydroxide (CH), 0.5% iodine potassium iodide (IKI), and 0.5% cetrimide (CTR), alone and in combinations on one-week and three-week-old biofilms. Materials and methods Gingival plaque was collected, and biofilms were grown in vitro anaerobically. Biofilms were exposed to each of the three medicaments and their combinations for one day, one week, and two weeks. Proportions of dead and live bacteria in the biofilms were evaluated. Results The killing of bacteria by different medicaments in the three-week-old biofilm was lower than in the one-week-old biofilm (p<0.05). The efficacy of IKI and CTR in killing bacteria was weaker than that of CH, but the highest efficacy in killing was achieved when all three were combined (p<0.05). There was no significant difference in the antibiofilm effect between a day's exposure to the mixture of the three medicaments and one or two weeks of treatment with CH alone (p>0.05). Conclusions Three-week-old biofilms are more resistant to medicaments than one-week-old biofilms. Combining IKI and CTR with CH resulted in a stronger antibiofilm effect than using CH alone. Mixing the three medicaments may enable obtaining the desired clinical effect in a shorter exposure time.

Retreatment of oval-shaped root canals filled with TotalFill bioceramic or AH plus sealer

This study investigated retreatment of oval canals filled with gutta-percha and different sealers using WaveOne Gold (WOG). Single oval canals were prepared to size 30, 0.04 and obturated with gutta percha and AH Plus (AHP) or TotalFill bioceramic (TFBC) sealer. After 6-month incubation, the canals were retreated with WOG Primary (25, 0.07) under simulated body temperature, and the developed load and torque were simultaneously measured. The time and regaining the apical patency were checked. Micro-computed tomography scanning was performed to calculate the remaining obturating materials. An independent t-test and chi-square test were performed at a 95% confidence level. A shorter retreatment time was needed in TFBC than in AHP (P = 0.003). However, a higher maximum apical load was reported with AHP (P = 0.000). Meanwhile, comparable maximum coronal load and maximum torque values were observed. Apical patency was regained in all TFBC roots and only 75% of the AHP samples (P = 0.217). The remaining obturating materials were comparable in TFBC (13.02 ± 8.12%) and AHP (10.11 ± 8.46%) (P = 0.398). WOG was able to remove 89.89% and 86.98% of obturating materials in TFBC and AHP, respectively. The TFBC presented lower apical loads and faster retreatment compared to AHP.

Cleaning and Disinfecting Oval-Shaped Root Canals: Ex Vivo Evaluation of Three Rotary Instrumentation Systems with Passive Ultrasonic Irrigation

Background and Objectives: Successful root canal treatment depends on the thorough removal of biofilms through chemomechanical preparation. This study aimed to investigate and compare the cleaning and disinfecting efficiency of oval-shaped root canals using XP-endo Shaper (XPS), ProTaper Next (PTN), and HyFlex CM (HCM) in combination with passive ultrasonic irrigation (PUI). Materials and Methods: Ninety extracted teeth were contaminated and randomly divided into three groups: XPS, PTN, and HCM. Each group was assigned to three subgroups: subgroup A (sterile saline), subgroup B (3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid), and subgroup C (3% sodium hypochlorite, 17% ethylenediaminetetraacetic acid, and PUI). Bacterial sampling was conducted both from baseline samples and samples after chemomechanical preparation. Scanning electron microscopy (SEM) was used to evaluate the residue bacterial biofilms, hard tissue debris, and smear layers on the buccolingual walls of oval-shaped root canals. Results: When combined with sterile saline, XPS demonstrated a higher reduction of bacterial counts and was more effective in eradicating Enterococcus faecalis in the middle third of the canals compared to the other instruments (p < 0.05). Additionally, when used with antimicrobial irrigants, XPS was more effective in disinfecting the coronal third of the canals than the other instruments (p < 0.05). Furthermore, XPS reduced hard tissue debris more effectively in the middle third of canals than in the apical third (p < 0.05). Conclusions: XPS outperforms PTN and HCM in disinfecting oval-shaped root canals. Despite the fact that combining XPS and PUI improves cleaning and disinfecting, removing hard tissue debris from the critical apical area remains challenging.

Assessment of Bioceramic Sealer Retreatability and Its Influence on Force and Torque Generation

This study assesses the retreatability of TotalFill bioceramic (TFBC) and AH Plus (AHP) sealers and their impact on retreatment force and torque. Twenty-six premolar teeth with single oval canals were instrumented, obturated using the matched gutta-percha cone technique with one of the tested sealers, and then temporized. After a 6-month incubation at 37 °C and 100% humidity, the canals were retreated with the XP Shaper system. During retreatment, the generated force and torque were measured. Micro-CT scanning was run before and after the retreatment procedure to analyze the remaining obturating materials in the canals. The apically directed maximum force in AHP was higher than that in TFBC. The coronally directed maximum force and the maximum torque were comparable between the groups. A higher amount of remaining obturating materials was found in the AHP compared to that in the TFBC. Based on these findings, endodontic sealer had an influence on retreatability, and the TFBC showed less remaining obturating materials and lower retreatment forces in the apical direction compared to the AHP in extracted teeth with oval canals.

Characterisation of deformed or separated nickel-titanium retreatment instruments after clinical use - A multicentre experience: Defect profiles of clinically-used retreatment instruments

OBJECTIVES

The present study examined the defect characteristics of clinically-used, discarded nickel titanium rotary retreatment instruments and analysed the impact of clinical use on their metallurgical properties.

METHODS

92 XP-endo Shaper (XPS; FKG Dentaire) and 20 XP-endo Finisher (XPFR; FKG Dentaire) instruments with structural deformation or separation were collected after retreatment from four endodontic clinics over a 20-month period. The types of defects and their relative locations were recorded. The lateral and fractured surfaces of the separated instruments were examined with scanning electron microscopy. Differential scanning calorimetry was used to investigate the thermal behaviour of new, deformed and fractured instruments.

RESULTS

77 (84%) XPS and 4 (20%) XPFR had an area with structural change while 15 (16%) XPS and 16 (80%) XPFR were fractured. All unfractured, deformed XPFR showed unwinding close to the coronal end of the flute. Fractures in XPS and XPFR were often close to the coronal end of the flutes or the expanding segments of the insruments. Most of the XPS fractures were torsional failure (67%) while XPFR failed predominantly by cyclic fatigue (81%). The austenite-finishing temperature of XPFR (40°C) was higher than that of XPS (35°C). Both XPS and XPFR exhibited 2-stage phase transformations.

CONCLUSIONS

Torsional failure was more prevalent in XPS instruments and fatigue failure was more prevalent in XPFR instruments. Among the investigated instruments, XPFR were more likely to separate without warning whereas XPS frequently exhibited plastic deformation. The latter may be used as a pre-separation forewarning sign during clinical retreatment.

CLINICAL SIGNIFICANCE

The failure mode of XP-endo Shaper and XP-endo Finisher used clinically for retreatment appeared to be different. Plastic deformation, the forewarning sign of instrument seaparation, occurs when XP-endo instruments are used for retreatment.

Retrievability of bioceramic-based sealers in comparison with epoxy resin-based sealer assessed using microcomputed tomography: A systematic review of laboratory-based studies

Aim:

The objective was to evaluate the retrievability of bioceramic sealers in comparison with epoxy resin-based sealers assessed using microcomputed tomography.

Materials and Methods:

Four reviewers independently conducted a systematic literature search in four electronic databases. The risk of bias was assessed using modified Joanna Briggs Institute Critical Appraisal tools for Quasi-Experimental Studies.

Results:

Ten articles were included in this review and all had a moderate risk of bias. The results across the included articles were inconsistent with some indicating easier/difficult removal of bioceramic sealers, while others indicate no difference. The studies varied in terms of the type of bioceramic sealer used, root canal anatomy, and retreatment techniques followed. Due to heterogeneity, only a qualitative analysis was performed and no meta-analysis was conducted.

Conclusion:

The quality of evidence is low and no definitive conclusion could be derived regarding the retrievability of bioceramic sealer/AH plus sealer from the root canals during retreatment procedures.