In vitro evaluation of local antibiotic delivery via fibrin hydrogel

Fabrication of Ciprofloxacin-Immobilized Calcium Phosphate Particles for Dental Drug Delivery

Calcium phosphate (CaP) particles immobilizing antibacterial agents have the potential to be used as dental disinfectants. In this study, we fabricated CaP particles with immobilized ciprofloxacin (CF), a commonly prescribed antibacterial agent, via a coprecipitation process using a supersaturated CaP solution. As the aging time in the coprecipitation process increased from 2 to 24 h, the CaP phase in the resulting particles transformed from amorphous to low-crystalline hydroxyapatite, and their Ca/P elemental ratio, yield, and CF content increased. Despite the higher CF content, the particles aged for 24 h displayed a slower release of CF in a physiological salt solution, most likely owing to their crystallized matrix (less soluble hydroxyapatite), than those aged for 2 h, whose matrix was amorphous CaP. Both particles exhibited antibacterial and antibiofilm activities along with an acid-neutralizing effect against the major oral bacteria, Streptococcus mutans, Porphyromonas gingivalis, and Actinomyces naeslundii, in a dose-dependent manner, although their dose-response relationship was slightly different. The aging time in the coprecipitation process was identified as a governing factor affecting the physicochemical properties of the resulting CF-immobilized CaP particles and their functionality as a dental disinfectant.

Effectiveness of combined local therapy with antibiotics and fibrin vs. vacuum-assisted wound therapy in soft tissue infections: a retrospective study

PURPOSE

Soft tissue infections can be severe and life-threatening. Their treatment consists currently in radical surgical wound debridement and combined systemic antimicrobial therapy. Different side effects are possible. Local antibiotic therapy represents a new approach to reduce side effects and improve healing. The aim of this study is to assess the effectiveness of the local sprayed use of antibiotics with fibrin sealing compared with negative pressure wound therapy as an established treatment of soft-tissue infections.

METHODS

In this retrospective study, patients with soft tissue infections who underwent surgical treatment were analysed. One group consists of patients, who received local fibrin-antibiotic spray (FAS) (n = 62). Patients treated by vacuum-assisted wound therapy (VAWT) as the established treatment were the control group (n = 57). Main outcomes were differences in the success of healing, the duration until healing and the number of needed operations.

RESULTS

Clinical healing could be achieved for 55 patients (98.21%) in the FAS group vs. 47 patients (92.16%) in the VAWT group (p = 0.19). Time to require this was 10.65 ± 10.38 days in the FAS group and 22.85 ± 14.02 days in the VAWT group (p < 0.001). In the FAS group, patients underwent an average of 1.44 ± 0.72 vs.3.46 ± 1.66 operations in the VAWT group (p < 0.001).

CONCLUSION

Compared to vacuum-assisted wound therapy in soft tissue infections, local fibrin-antibiotic spray shows faster clinical healing and less needed operations. Leading to shorter hospital stays and more satisfied patients. The combination of sprayed fibrin and antibiotics can be seen as a promising and effective method.

Bioactive Endodontic Hydrogels: From Parameters to Personalized Medicine

Regenerative endodontic procedures (REPs) aim at recreating dental pulp tissue using biomaterials such as hydrogels. Their bioactivity is mostly related to the nature of biomolecules or chemical compounds that compose the endodontic hydrogel. However, many other parameters, such as hydrogel concentration, bioactive molecules solubility, and apex size, were reported to influence the reciprocal host-biomaterial relationship and hydrogel behavior. The lack of knowledge regarding these various parameters, which should be considered, leads to the inability to predict the clinical outcome and suggests that the biological activity of endodontic hydrogel is impossible to anticipate and could hinder the bench-to-bedside transition. We describe, in this review, that most of these parameters could be identified, described, and studied. A second part of the review lists some challenges and perspectives, including development of future mathematical models that are able to explain, and eventually predict, the bioactivity of endodontic hydrogel used in a clinical setting.

Applications of Hydrogels in Drug Delivery for Oral and Maxillofacial Diseases

Oral and maxillofacial diseases have an important impact on local function, facial appearance, and general health. As a multifunctional platform, hydrogels are widely used in the biomedical field due to their excellent physicochemical properties. In recent years, a large number of studies have been conducted to adapt hydrogels to the complex oral and maxillofacial environment by modulating their pore size, swelling, degradability, stimulus-response properties, etc. Meanwhile, many studies have attempted to use hydrogels as drug delivery carriers to load drugs, cytokines, and stem cells for antibacterial, anticancer, and tissue regeneration applications in oral and maxillofacial regions. This paper reviews the application and research progress of hydrogel-based drug delivery systems in the treatment of oral and maxillofacial diseases such as caries, endodontic diseases, periodontal diseases, maxillofacial bone diseases, mucosal diseases, oral cancer, etc. The characteristics and applications of hydrogels and drug-delivery systems employed for the treatment of different diseases are discussed in order to provide a reference for further research on hydrogel drug-delivery systems in the future.

PEG-PLGA nanoparticles for encapsulating ciprofloxacin

Antibiotic medications have been found to hinder the success of regenerative endodontic treatment due to the rapid degradation of the drug, and the acidic nature of ciprofloxacin (CIP) can be harmful to stem cells of the apical papilla (SCAPs), the cells responsible for regeneration. In this study, a nanocarrier system was used for controlled drug release for longer drug activity and less cytotoxicity to the cells. CIP was loaded in poly (ethylene glycol) methyl ether-block-poly (lactide-co-glycolide) (PEG-PLGA) nanoparticles (NPs) with an ion-pairing agent. The NPs demonstrated a monodispersed spherical morphology with a mean diameter of 120.7 ± 0.43 nm. The encapsulation efficiency of the CIP-loaded PEG-PLGA NPs was 63.26 ± 9.24%, and the loading content was 7.75 ± 1.13%. Sustained CIP release was achieved over 168 h and confirmed with theoretical kinetic models. Enhanced NP bactericidal activity was observed against Enterococcus faecalis. Additionally, CIP-loaded PEG-PLGA NPs had a low cytotoxic effect on SCAPs. These results suggest the use of a nanocarrier system to prolong the antibiotic activity, provide a sterile environment, and prevent reinfection by the bacteria remaining in the root canal during regenerative endodontic treatment.

Technological advances in fibrin for tissue engineering

Fibrin is a promising natural polymer that is widely used for diverse applications, such as hemostatic glue, carrier for drug and cell delivery, and matrix for tissue engineering. Despite the significant advances in the use of fibrin for bioengineering and biomedical applications, some of its characteristics must be improved for suitability for general use. For example, fibrin hydrogels tend to shrink and degrade quickly after polymerization, particularly when they contain embedded cells. In addition, their poor mechanical properties and batch-to-batch variability affect their handling, long-term stability, standardization, and reliability. One of the most widely used approaches to improve their properties has been modification of the structure and composition of fibrin hydrogels. In this review, recent advances in composite fibrin scaffolds, chemically modified fibrin hydrogels, interpenetrated polymer network (IPN) hydrogels composed of fibrin and other synthetic or natural polymers are critically reviewed, focusing on their use for tissue engineering.

Combined Release of Antiseptic and Antibiotic Drugs from Visible Light Polymerized Biodegradable Nanocomposite Hydrogels for Periodontitis Treatment

The in situ application of the combination of different types of drugs revolutionized the area of periodontal therapy. The purpose of this study was to develop nanocomposite hydrogel (NCHG) as a pH-sensitive drug delivery system. To achieve local applicability of the NCHG in dental practice, routinely used blue-light photopolymerization was chosen for preparation. The setting time was 60 s, which resulted in stable hydrogel structures. Universal Britton–Robinson buffer solutions were used to investigate the effect of pH in the range 4–12 on the release of drugs that can be used in the periodontal pocket. Metronidazole was released from the NCHGs within 12 h, but chlorhexidine showed a much longer elution time with strong pH dependence, which lasted more than 7 days as it was corroborated by the bactericidal effect. The biocompatibility of the NCHGs was proven by Alamar-blue test and the effectiveness of drug release in the acidic medium was also demonstrated. This fast photo-polymerizable NCHG can help to establish a locally applicable combined drug delivery system which can be loaded with the required amount of medicines and can reduce the side effects of the systemic use of drugs that have to be used in high doses to reach an ideal concentration locally.

Development of an antibacterial nanocomposite hydrogel for human dental pulp engineering

Hydrogel-based regenerative endodontic procedures (REPs) are considered to be very promising therapeutic strategies to reconstruct the dental pulp (DP) tissue in devitalized human teeth. However, the success of the regeneration process is limited by residual bacteria that may persist in the endodontic space after the disinfection step and contaminate the biomaterial. The aim of this work was to develop an innovative fibrin hydrogel incorporating clindamycin (CLIN)-loaded Poly (d,l) Lactic Acid (PLA) nanoparticles (NPs) to provide the hydrogel with antibacterial properties. CLIN-PLA-NPs were synthesized by a surfactant-free nanoprecipitation method and their microphysical properties were assessed by dynamic light scattering, electrophoretic mobility and scanning electron microscopy. Their antimicrobial efficacy was evaluated on Enteroccocus fæcalis by the determination of the minimal inhibitory concentration (MIC) and the minimal biofilm inhibition and eradication concentrations (MBIC and MBEC). Antibacterial properties of the nanocomposite hydrogel were verified by agar diffusion assays. NP distribution into the hydrogel and release from it were evaluated using fluorescent PLA-NPs. NP cytotoxicity was assessed on DP mesenchymal stem cells (DP-MSCs) incorporated into the hydrogel. Type I collagen synthesis was investigated after 7 days of culture by immunohistochemistry. We found that CLIN-PLA-NPs displayed a drug loading of 10 ± 2 μg per mg of PLA polymer and an entrapment efficiency of 43 ± 7%. Antibiotic loading did not affect NP size, polydispersity index and zeta potential. The MIC for Enterococcus fæcalis was 32 μg mL-1. MBIC50 and MBEC50 were 4 and 16 μg mL-1, respectively. CLIN-PLA-NPs appeared homogenously distributed throughout the hydrogel. CLIN-PLA-NP-loaded hydrogels clearly inhibited E. faecalis growth. DP-MSC viability and type I collagen synthesis within the fibrin hydrogel were not affected by CLIN-PLA-NPs. In conclusion, CLIN-PLA-NP incorporation into the fibrin hydrogel gave the latter antibacterial and antibiofilm properties without affecting cell viability and function. This formulation could help establish an aseptic environment supporting DP reconstruction and, accordingly, might be a valuable tool for REPs.

Self-crosslinked chitosan/dialdehyde xanthan gum blended hypromellose hydrogel for the controlled delivery of ampicillin, minocycline and rifampicin

The design of improved biopolymeric based hydrogel materials with high load-capacity to serve as biocompatible drug carriers is a challenging task with vital implications in health sciences. In this work, chitosan crosslinked dialdehyde xanthan gum interpenetrated hydroxypropyl methylcellulose gels were developed for the controlled delivery of different antibiotic drugs including ampicillin, minocycline and rifampicin. The prepared hydrogel scaffolds were characterized by rheology method, FTIR, SEM, TGA and compression analysis. In addition, gelation kinetics, swelling, in vitro degradation and drug release rate were studied under simulated gastrointestinal fluid conditions of pH 2.0 and 7.4 at 37 °C. Results demonstrated the gel composition and structure affected drug release kinetics. The release study showed more than 50% cumulative release within 24 h for all investigated antibiotic drugs. In vitro cell cytocompatibility using mouse embryonic fibroblast cell lines depicted ≥80% cell viability, indicating the gels are non-toxic. Finally, the antibacterial activity of loaded gels was evaluated against Gram-negative and positive bacteria (Escherichia coli, Staphylococcus aureus and Klebsiella pneumonia), which correlated well with swelling and drug release results. Overall, the present study demonstrated that the produced hydrogel scaffolds serves as promising material for controlled antibiotic delivery towards microbial growth inhibition.

Red and Yellow Injectable Platelet-Rich Fibrin Demonstrated Differential Effects on Periodontal Ligament Stem Cell Proliferation, Migration, and Osteogenic Differentiation

The biological benefits of using two fractions derived from injectable platelet-rich fibrin (i-PRF) in bone regeneration remain unclear. Thus, the current study examined two fractionation protocols producing yellow i-PRF and red i-PRF on periodontal ligament stem cells (PDLSCs). The i-PRF samples from five donors were harvested from two different levels, with and without a buffy coat layer, to obtain red and yellow i-PRF, respectively. The PDLSCs were isolated and characterized before their experimental use. The culture medium in each assay was loaded with 20% of the conditioned medium containing the factors released from the red and yellow i-PRF. Cell proliferation and cell migration were determined with an MTT and trans-well assay, respectively. Osteogenic differentiation was investigated using alkaline phosphatase and Alizarin red staining. The efficiency of both i-PRFs was statistically compared. We found that the factors released from the red i-PRF had a greater effect on cell proliferation and cell migration. Moreover, the factors released from the yellow i-PRF stimulated PDLSC osteogenic differentiation earlier compared with the red i-PRF. These data suggest that the red i-PRF might be suitable for using in bone regeneration because it induced the mobilization and growth of bone regenerative cells without inducing premature mineralization.