Prevalence of bifid mandibular canal according to gender, type and side

Prevalence and topography of bifid and trifid mandibular canal in Turkish Western Anatolia Population: evaluation of the inferior alveolar canal with CBCT

PURPOSE

Various anatomical variations of the inferior alveolar canal increase the incidence of surgical complications; Therefore, this study aimed to evaluate the frequency and configuration of bifid and trifid mandibular canals using cone beam computed tomography (CBCT) in the Turkish subpopulation.

METHODS

The inferior alveolar canal was evaluated on 1014 hemi-mandibles in the CBCT (I-CAT 3D Imaging System) images of 513 patients. The frequency and configuration of the bifid and trifid mandibular canal (MC) were examined. The relationship between bifid MC configuration and dental status and age groups was analyzed. The distance of the accessory canal to the buccal and lingual walls and the alveolar crest was measured. The diameter of the main canal and accessory canal was measured and its relationship with dental status and age groups was evaluated.

RESULTS

Bifid MC was found in 266 hemi-mandibles (24.7%) and 212 (41.3%) of 513 patients. The most common type of bifid MC was the retromolar canal (87 sides), followed by the forward canal without confluence (41; 4%) and the dental canal (34; 3.4%). 10 of the dental canals were opening to the 1st molar, 14 of the 2nd molars, and 10 of the 3rd molars. The number of retromolar foramina was 1 on 56 sides, 2 on 15 sides, and 3 on 4 sides. Forward canal without confluence was more common in edentulous patients than in dentulous patients, while the dental canal was more common in dentulous patients. The main canal diameter was 3.53 ± 0.97 mm and the bifid MC diameter was 1.82 ± 0.70 mm. Distance of the bifid MC to the lingual wall was higher in the > 64 years group than in the 18-39 years group (p = 0.022). Distance of the bifid MC to the alveolar crest was lower in the > 64 years group compared to the 18-39 years group and 40-64 years group (p = 0.015). The main canal diameter was higher in the 40-64 years group than in the 18-39 years group (p = 0.012).

CONCLUSION

Bifid MC has a high prevalence, occurring in almost one in two patients. Dental and retromolar types, which are close to the teeth, are more common, and this increases the possibility of complications. CBCT is the most accurate imaging technique used to detect and define these variations.

Identifying the Anatomical Variations of the Inferior Alveolar Nerve with Magnetic Resonance Imaging

BACKGROUND

The inferior alveolar nerve (IAN) is located in the mandibular canal (MC). It is critical to evaluate the position of the MC during treatment planning to prevent intra or postoperative complications.

AIMS

This retrospective study aimed to identify the anatomy and anatomical variations of the IAN using soft tissue imaging (pulse sequence magnetic resonance imaging [MRI]).

MATERIALS AND METHODS

This study was designed as a retrospective Consolidated Standards of Reporting Trials (CONSORT) study. In total, 220 MR images were obtained. Nutrient canals (NCs) were classified as intraosseous and dental NCs, while bifid MCs (BMCs) were classified as forward, retromolar, and buccolingual canals. IBM SPSS Statistics 22 was used. Kolmogorov-Smirnov and Shapiro-Wilk tests, descriptive statistical methods (means, standard deviations, and frequencies), and the Chi-square test were used. Statistical significance was set at P < 0.05.

RESULTS

In total, 220 patients (172 females and 48 males) were evaluated. NCs were present in 92.3% of all MCs and were significantly higher in patients aged <25 years. BMCs were observed in 106 patients (24.1%). The most common BMC of MC/IAN was in the forward canal (14.4%), followed by the retromolar canal (7.5%).

CONCLUSION

Although previously, the dental canal was considered as an anatomical variation, this study revisited the classification and suggested that dental canals are anatomical structures.

Advancements in oral and maxillofacial surgery medical images segmentation techniques: An overview

OBJECTIVES

This article reviews recent advances in computer-aided segmentation methods for oral and maxillofacial surgery and describes the advantages and limitations of these methods. The objective is to provide an invaluable resource for precise therapy and surgical planning in oral and maxillofacial surgery. Study selection, data and sources: This review includes full-text articles and conference proceedings reporting the application of segmentation methods in the field of oral and maxillofacial surgery. The research focuses on three aspects: tooth detection segmentation, mandibular canal segmentation and alveolar bone segmentation. The most commonly used imaging technique is CBCT, followed by conventional CT and Orthopantomography. A systematic electronic database search was performed up to July 2023 (Medline via PubMed, IEEE Xplore, ArXiv, Google Scholar were searched).

RESULTS

These segmentation methods can be mainly divided into two categories: traditional image processing and machine learning (including deep learning). Performance testing on a dataset of images labeled by medical professionals shows that it performs similarly to dentists' annotations, confirming its effectiveness. However, no studies have evaluated its practical application value.

CONCLUSION

Segmentation methods (particularly deep learning methods) have demonstrated unprecedented performance, while inherent challenges remain, including the scarcity and inconsistency of datasets, visible artifacts in images, unbalanced data distribution, and the "black box" nature.

CLINICAL SIGNIFICANCE

Accurate image segmentation is critical for precise treatment and surgical planning in oral and maxillofacial surgery. This review aims to facilitate more accurate and effective surgical treatment planning among dental researchers.

Prevalence of bifid variations of the mandibular canal in an Iranian population using cone-beam computed tomography

OBJECTIVES

Bifid mandibular canal (MC) is an anatomical variation of the MC. This study aimed to assess the prevalence and shape of bifid MC in an Iranian population.

MATERIALS AND METHODS

A total of 681 patients who had undergone cone-beam computed tomography (CBCT) for different purposes between 2018 and 2020 were evaluated. After detection, bifid MCs were classified into four types forward, buccolingual, dental, and retromolar. CBCT images were assessed by two oral and maxillofacial radiologists. Data were analyzed by SPSS using an independent t-test and Chi-square test.

RESULTS

Bifid MC was found in 23 (3.4%) out of 681 patients, with a mean age of 32.21 years. Ten patients (1.5%) had a bifid MC on the right side, 6 (0.9%) on the left side, and 7 (1%) bilaterally. However, no significant correlation was found between laterality and the prevalence of bifid MC (P > 0.05). Bifid MC was found in 8 males (34.8%) and 15 females (65.2%). Gender had no significant correlation with the prevalence of bifid MC (P > 0.05). Forward type was the most common (n = 8, 1.2%) followed by buccolingual (n = 5, 0.73%), dental (n = 2, 0.3%), and retromolar (n = 1, 0.14%) types.

CONCLUSION

According to the present results, bifid MC was not uncommon in the Iranian population of the present study, and forward type was the most common, followed by buccal and then dental bifid MCs. There was no significant correlation between sex and age with bifid MC but bifid MC was detected more frequently in females than males, and it was seen unilaterally in a higher percentage of the cases.

Characterization of a retromolar foramen in a Chinese population: A radiographic study

BACKGROUND

Retromolar canal (RMC) arises from the mandibular canal (MC) behind the second or third molar and travels anterosuperiorly to a retromolar foramen (RMF). RMCs and RMFs have generally been ignored in anatomical textbooks and have rarely been reviewed or studied in the anatomical and dental literature until the last decades.

OBJECTIVE

This study aimed to characterize RMF in a Chinese population concerning its incidence, origin, and classification via anatomical study and periapical radiography.

METHODS

123 dry adult Chinese mandibles were collected to observe the incidence of RMFs. RMFs were determined using a steel wire 0.5 mm in diameter. The passways or origins of the retromolar canal (RMC) were determined and classified via periapical radiography. For each RMF, two dentists independently measured the diameter and its distances to the lingual cortex, the buccal cortex, and the distal edge of the last tooth (or the alveolar fossa) using a vernier caliper.

RESULTS

The incidence of RMFs was 31.71%. The average RMF diameter was 0.78 ± 0.27 mm. From RMF, the distance was 4.27 ± 1.87 mm to the lingual cortex, 8.61 ± 2.23 mm to the buccal cortex, and 7.84 ± 3.87 mm to the distal edge of the last tooth (or the alveolar fossa). RMCs were classified into MC type originating from the mandibular canal and AF type originating from the alveolar fossa. The diameters of MC ones were more significant than those of AF ones. There was no apparent correlation between the existence of the third molar and the presence of an RMF.

CONCLUSION

The incidence of RMFs in Chinese may be about one-third, which is a potential factor in the onset of surgery accidents. RMCs can be classified into two types by their origins. One of them is MC, which originates from the mandibular canal, and the other is AF, which originates from the alveolar fossa.

An evaluation of mandibular canal variations: a systematic review and meta-analysis

The inferior alveolar nerve and vessels are carried via the mandibular canal, which extends bilaterally from the inferior alveolar foramen to the mental foramen. Bifid and trifid mandibular canals result from abnormal fusions of nerve canals. The purpose of this study was to provide an up-to-date and comprehensive analysis of the prevalence of mandibular canal variations among healthy adults, and to identify any potential ethnic, sex, or laterality predilections. The prevalence of the bifid mandibular canal was 18.87% and that of the trifid canal 1.3%. Unilateral variants were three times commoner than bilateral. Each mandibular half had four canals emanating from separate openings on the lingual surface of the mandibular ramus. Retromolar and forward canals were the predominant subtypes, followed by dental; buccolingual were the least frequent. The mean length and diameter of the bifid mandibular canal were 13.62 mm and 1.63 mm, respectively. The possibility of a bifid mandibular canal is a crucial consideration in dental medicine. Because anatomical variations of the mandibular canal are fairly common, awareness of them is essential for anatomy teachers and for surgeons who operate in the oromaxillofacial region.

Bifid Mandibular Canal: A Proportional Meta-Analysis of Computed Tomography Studies

Introduction

Growing body of evidences showed different grades in prevalence of bifid mandibular canals. Because the previous reviews focused solely on patient-level occurrence, hemi-mandible-level prevalence, bilateral symmetry, length, and diameter of bifid mandibular canals were required to be estimated collectively. The research question of this meta-analysis was "What is the prevalence of bifid mandibular canal among patients seeking computed tomography examinations"?

Materials and Methods

In vivo, computed tomography, and cross-sectional studies were eligible. Studies, with less than 100 subjects or anatomic site restriction or controlled class of bifid mandibular canal, were excluded. Joanna Briggs Institute (JBI) critical appraisal tool for prevalence studies was used to assess methodological quality of all included studies. Random effect meta-analyses for proportion of bifid mandibular canal were done.

Results

40 studies met the inclusion criteria. All studies were selected for both systematic review and meta-analyses. Totally, 17714 patients and 31973 hemi-mandibles were included. All eligible studies showed moderate risk of bias on average. Resulting from the random effect model, more than 20% of patients seeking computed tomographic examinations had bifid mandibular canals (BMCs) which penetrated into slightly more than 14% of hemi-mandibles. Of the patients having bifid mandibular canals (BMCs), nearly 23% exhibited such anatomy on both sides of their mandibles. Estimated mean length and diameter of the accessory canals of bifid mandibular canals were 12.17 mm and 1.54 mm, respectively.

Conclusion

The geographical locations, classifications, reliability test, and voxel size of computed tomography were all implicated in the prevalence of bifid mandibular canals along with gender and laterality, although considerable heterogeneity and bias were detected.

Prevalence of Bifid Mandibular Canal: A Systematic Review and Meta-analysis

Objectives

The aim of this study was to evaluate the prevalence of bifid mandibular canal (BMC) using cone-beam computed tomography (CBCT) and panoramic images through meta-analysis.

Methods

Databases of Scopus, PubMed, and Web of Science were searched to find the relevant studies. Studies the met the inclusion criteria were selected. Variables of prevalence, side, length and diameter of BMC and sex were assessed. Data was analyzed using STATA software version 17.

Results

Of the 1164 articles initially selected, 36 were enrolled. A total of 38077 patients were considered. The overall prevalence of BMC was 18.0%. Studies that evaluated CBCT images reported higher prevalence of BMC compared to panoramic images (25.0% vs 3.0%). The prevalence of BMC was higher in men than women and slightly higher in right side than the left side of the jaw, but none of those differences were significant.

Conclusion

The results have shown a total prevalence of 18.0% for BMC. Detection power of CBCT images were higher than panoramics. There was no significant relation between prevalence of BMC with sex or side of the jaw.

Variation of Mandibular Canal Branching Related to Anatomical Regions in Mandible: A Radiographic Study Without Contrast

PURPOSE

Screening mandibular canal branches and awareness of these possible canal branches is vital for patient safety and surgical success. The aim of this study was to evaluate the prevalence and localization of mandibular canal branching (MCB).

METHODS

This is an institutional and retrospective cohort study of patients who presented for evaluation of cone beam computed tomography (CBCT) between 2019 and 2020. The prevalence of MCB and the related foramina was estimated according to anatomical regions. Predictor variables were gender, age, anatomical region, and side of branches. Outcome variable of the study was MCB. Thus, multiple correspondence analysis was performed to determine the relationships between the categories of the variables, as well as between variables.

RESULTS

CBCT images were obtained from 180 patients (n = 360 hemimandible; 90 males, 90 females). MCB was observed in 130 (72.2%) of 180 patients (mean age = 38.2 ± 11.8 years). MCB was observed in 63 (48.5%) males and 67 (51.5%) females, and the prevalence of MCB did not differ significantly according to gender (P = .618). MCB was mostly observed in the molar region (69 branches, 34.3%). Foramina were detected in 60 of 248 branches (24.19%) and were mostly observed in the retromolar region (28 foramina, 46.7%). "Quadrafid" branching was detected in 2 females (1.11%). Female patients aged 19-38 years were more prone to have MCB in molar and retromolar regions. MCB was more likely to occur bilaterally. There was also a high positive correlation among the MCB, side, and anatomical regions.

CONCLUSIONS

MCB is not a rare anatomical variation, and even quadrafid branching can be observed in the hemimandible. CBCT images should be examined carefully for possible MCB to minimize postoperative complications during dental surgery.

Prevalence and Characterization of bifid mandibular Canal Using Cone Beam Computed Tomography: A Retrospective Cross-Sectional Study in Saudi Arabia

Aim

The purpose of this study is to determine the prevalence and morphological characteristics of the bifid mandibular canal in a Saudi Arabian subpopulation, to aid in preventing surgical complications near the mandibular canal.

Patients and Methods

Using CBCT images obtained from the Radiology unit database in a University Hospital Clinics. A total of 488 CBCT images were investigated (244 Female – 178 Male). In the present study, the Naitoh classification was used to categorize the bifid mandibular canal into the following types: 1) Retromolar canal; 2) Dental canal; 3) Forward canal (with or without confluence); and 4) Buccolingual canal. Additional variation (Trifid canal) was included. All CBCTs were assessed in coronal, sagittal, axial, as well as panoramic views using specialized software.

Results

The prevalence of BMC was 28.7% (95% CI, 24.5 to 33.2), Gender (p = 0.404) and age (p = 0.654) had no statistical significances, laterality of BMC, patients with unilateral BMC were significantly older than those with bilateral BMC (mean ± SD ages of 40.5 ± 13.5 and 32.9 ± 13.8, respectively, p = 0.009). About two-thirds (67.5%) of the investigated BMC cases were found unilateral. The most common reported type of BMC was retromolar canal.

Conclusion

The incidence of bifid mandibular canal using CBCT is considered relatively high in Saudi Arabian subpopulation, with the most common type was the retro-molar canal.

Prevalence and Characteristics of Accessory Mandibular Canals: A Cone-Beam Computed Tomography Study in a European Adult Population

The purpose of this observational study is to evaluate the prevalence and main characteristics of bifid canals within a European adult population, analyzing cone-beam-computed tomography (CBCT). The population study examined 300 subjects. The CBCTs were performed between 2012 and 2019, using PaX-Zenith3D with a standard protocol of acquisition. The parameters analyzed were the presence and lengths of the bifid mandibular canals. The sample included 49% male and 51% female participants. The mean age of the patients was 47.07 ± 17.7 years. Anatomical variants of the mandibular canal were identified in 28.8% of the sides and 50.3% of the patients. In 7.3% of the subjects, the anatomical variants were present bilaterally. The most frequently encountered bifid canal was Type 3 (40.5%), followed by the Type 1 canal (39.3%), the Type 2 canal (14.5%), and the Type 4 canal (5.9%), 40% on the right side and 60% on the left side. The average length of the bifid canals located on the right side of the mandible was 11.96 ± 5.57 mm, compared to 11.38 ± 4.89 mm for those measured on the left side. The bifid mandibular canal is a common anatomical variation of the mandibular canal. It is fundamental to performing an accurate preoperative evaluation using CBCT analysis to avoid and/or reduce intraoperative and postoperative complications.

Normal Variants of the Oral and Maxillofacial Region: Mimics and Pitfalls

A normal variant is defined as an incidental, often asymptomatic, imaging finding that mimics a true pathologic condition. Given the complex anatomy and wide variety of normal variants in the oral and maxillofacial region, a thorough understanding of commonly encountered normal variants in this region is essential to avoid misinterpretation and unnecessary further imaging or interventions. Moreover, familiarity with normal variants that are known to become symptomatic at times is necessary to facilitate further workup and guide the treatment plan. Intraoral radiography and panoramic radiography, which are unique to oral and maxillofacial radiology, provide two-dimensional (2D) images. Hence, the overlapping of structures or the displacement of the tomographic layer on images can confuse radiologists. It is crucial to understand the principle of 2D imaging to avoid being confused by ghost images or optical illusions. In addition, understanding the normal development of the maxillofacial region is essential when interpreting maxillofacial images in children or young adults because the anatomy may be quite different from that of mature adults. Knowledge of changes in the jaw bone marrow and each tissue's growth rate is essential. It is also necessary to know when the tooth germ begins to calcify and the tooth erupts for diagnostic imaging of the maxillofacial region. The authors describe imaging findings and clinical manifestations of common normal variants in the oral and maxillofacial region, divided into four parts: the maxilla, mandible, tooth, and temporomandibular joint, and discuss the imaging approach used to differentiate normal variants from true pathologic conditions. Online supplemental material is available for this article. ^©RSNA, 2022.

Prevalence of bifid and trifid mandibular canals with unusual patterns of nerve branching using cone beam computed tomography

Lack of knowledge concerning the inferior alveolar canal anatomical variations had proven to increase the incidence of surgical complications, so the study aimed to assess the configuration and prevalence of bifid and trifid mandibular canals using cone beam CT in Egyptian subpopulation. Cone beam CT scans of 278 patients (530 hemi-mandibles) were included in the study, in which bifid and trifid mandibular canals or any other branching patterns were recorded and evaluated. Bifid canals were categorized following Naitoh classification, and the diameter of the main mandibular and accessory canals was measured. Bifid canals were detected in 181 canals (34%) while trifid canals in 46 canals (8.7%). Upon classifying the bifid canals, 78 canals showed forward type, 40 retromolar type, 33 dental type, and 7 canals showed buccolingual type. Two special bifid canals subtypes were reported in 23 canals and nine distinct patterns of trifid canals were reported in our study. In addition, unusual patterns of canal branching were reported in 5 cases. The mean diameter of the accessory canals was 1.18 ± .54 mm and the main canal was 3.98 ± 1.31 mm. This study reported a high prevalence (54%) of canal branching, which reinforces the importance of cone beam CT in pre-surgical planning.

Prevalence of retromolar canal and its association with mandibular molars: study in CBCT

OBJECTIVE

Investigate the presence and characteristics of the retromolar canal and association with mandibular molars using cone-beam computed tomography (CBCT).

STUDY DESIGN

CBCT images of 200 consecutive patients were analyzed using the Anatomage Invivo 5^® software. Retromolar canal present evaluated the type of trajectory, buccal or lingual location, uni or bilateral, origin and final diameters. Pearson's Chi square test was used to verify the association between the retromolar canal and the presence of the third molar (p ≤ 0.05).

RESULTS

The prevalence of the retromolar canal was 24.5%. The oblique trajectory was the most common (33.3% on the right side and 50% on the left side). Buccal location was the most frequent (right side 50% and left side 70%). The unilateral canal was the most frequent (77.6%). As for the caliber, the diameters vary from 1.12 to 2.37 mm. Regarding the association between the retromolar canal and the third molar, there was no statistically significant difference (right side p = 0.60 and left side p = 0.90).

CONCLUSION

The retromolar canal is not a rare anatomical variation showing a prevalence of 24.5%. Surgical procedures should consider the presence of the retromolar canal to avoid excessive bleeding, considering its significant caliber.

Assessment of the Retromolar Canal in Taiwan Subpopulation: A Cross-Sectional Cone-Beam Computed Tomography Study in a Medical Center

The retromolar canal is an anatomical variation that occurs in the mandibular bone. The retromolar canal typically originates in the mandibular canal on the distal side of the third molar and extends forward and upward to the retromolar foramen (RMF), which contains the neurovascular bundle. Accidentally damaging the neurovascular bundle in the retromolar canal during the extraction of the third molar, dental implant surgery, or maxillofacial orthognathic surgery may lead to subsequent complications such as incomplete local anesthesia, paresthesia, and bleeding during operation. The objective of this study was to investigate the prevalence of the RMF in the Taiwanese population in a medical center by using dental cone-beam computed tomography (CBCT) and to identify the position of the RMF in the mandibular bone. The dental CBCT images for the mandibular bone of 68 hemi-mandible were uploaded to the medical imaging software Mimics 15.1 to determine the prevalence of the RMF in the Taiwanese population and the three positional parameters of the RMF in the mandibular bone: (1) The diameter of the RMF, (2) the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the second molar, and (3) the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal. Seven RMFs were observed in the 68 hemi-mandibles. Thus, the RMF prevalence was 10.3%. In addition, the diameter of the RMF was 1.41 ± 0.30 mm (mean ± standard deviation), the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the the second molar was 12.93 ± 2.87 mm, and the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal below second molar was 13.62 ± 1.3487 mm. This study determined the prevalence of the RMF in the Taiwanese population in a medical center and its relative position in the mandibular bone. This information can provide clinicians with a reference for posterior mandible anesthesia and surgery to ensure medical safety.

Anatomical variations of the mandibular canal and their clinical implications in dental practice: a literature review

INTRODUCTION

The anatomical variations of the mandibular canal have been described according to the number of additional branches it presents, bifid and trifid. Within the bifids we can also find subtypes of variations such as the retromolar mandibular canal. These anatomical variations can have important clinical implications for the work of dental professionals.

METHODS

A systematic search of the literature was carried out in different databases that met the following criteria: articles published between 2000 and 2020, and articles that established a clinical correlation with variations in the mandibular canal.

RESULTS

After applying inclusion and exclusion criteria, 32 articles were obtained, in which the variations of the mandibular canal were identified, their prevalence and incidence, which was very varied between the different articles, it was also found that the CBCT was the main technique to identify the anatomical variations of the mandibular canal. Lastly, the anatomical variations of the mandibular canal have a direct clinical correlation with pre-surgical, intra-surgical and postsurgical complications in pathologies that require surgical intervention.

CONCLUSIONS

The anatomical variations of the mandibular canal have a high incidence, so knowing them is of vital importance both for clinicians and anatomy professors who provide morphological training. We believe that research should focus on describing and diagnosing the causes of these anatomical variations. That said, there is also a continuous challenge for all health professionals to learn about the different anatomical variations that the human body presents and how these can affect clinical practice.

Incidence and Anatomical Properties of Retromolar Canal in an Iranian Population: A Cone-Beam Computed Tomography Study

Objectives

Retromolar canal (RC) is an anatomic structure, and due to increasing demand for surgical procedure in the retromolar area of the mandible, the identification of the retromolar canal has become an issue of clinical concern. It can innervate the third molar and some of the muscles around the posterior segment of the mandible, complicating surgical procedures in the retromolar area and root canal treatment of third molars. The aim of this study was to evaluate the incidence and anatomical properties of RC in a western Iranian population using cone-beam computed tomography (CBCT) images. Materials and Methods. Two hundred bilateral CBCT images were collected and screened in the three spatial planes for the presence of an RC. Anatomical properties and location of the RCs were assessed according to their course and distance from the surrounding structures. The relationship between the presence of RC and age, sex, side, and presence of second and third molars was also evaluated. Independent samples t-test, ANOVA, Tukey's post hoc test, paired t-test, ANOVA, Tukey's post hoc test, paired

Results

At least one RC was observed in 22% of the mandibles. Its bilateral incidence was 5.5%. Two major types of canals were detected, namely, type I, following a straight or curved course from the mandibular canal (MC) to the retromolar area (47.3%), and type II, coursing from the retromolar area to the radicular part of the third molar (52.7%). Regarding linear measurements, the mean RC diameter and the mean distance to the MC, second, and third molars were 0.68 ± 0.31, 13.7 ± 2.8, 15.3 ± 3.0, and 7.3 ± 2.3 mm, respectively.

Conclusion

Based on the results of this study, RC was found in 22% of the cases; thus, it should be considered as a normal anatomical variation in the Iranian population rather than a rare finding.