Clinical evaluation of 3D printed nano-porous hydroxyapatite bone graft for alveolar ridge preservation: A randomized controlled trial

Advances in clinical applications of bioceramics in the new regenerative medicine era

In this editorial, we comment on the hard and soft tissue applications of different ceramic-based scaffolds prepared by different mechanisms such as 3D printing, sol-gel, and electrospinning. The new concept of regenerative medicine relies on biomaterials that can trigger in situ tissue regeneration and stem cell recruitment at the defect site. A large percentage of these biomaterials is ceramic-based as they provide the essential requirements of biomaterial principles such as tailored multisize porosity, antibacterial properties, and angiogenic properties. All these previously mentioned properties put bioceramics on top of the hierarchy of biomaterials utilized to stimulate tissue regeneration in soft and hard tissue wounds. Multiple clinical applications registered the use of these materials in triggering soft tissue regeneration in healthy and diabetic patients such as bioactive glass nanofibers. The results were promising and opened new frontiers for utilizing these materials on a larger scale. The same results were mentioned when using different forms and formulas of bioceramics in hard defect regeneration. Some bioceramics were used in combination with other polymers and biological scaffolds to improve their regenerative and mechanical properties. All this progress will enable a larger scale of patients to receive such services with ease and decrease the financial burden on the government.

Osteogenically committed hUCMSCs-derived exosomes promote the recovery of critical-sized bone defects with enhanced osteogenic properties

Low viability of seed cells and the concern about biosafety restrict the application of cell-based tissue-engineered bone (TEB). Exosomes that bear similar bioactivities to donor cells display strong stability and low immunogenicity. Human umbilical cord mesenchymal stem cells-derived exosomes (hUCMSCs-Exos) show therapeutic efficacy in various diseases. However, little is known whether hUCMSCs-Exos can be used to construct TEB to repair bone defects. Herein, PM-Exos and OM-Exos were separately harvested from hUCMSCs which were cultured in proliferation medium (PM) or osteogenic induction medium (OM). A series of in-vitro studies were performed to evaluate the bioactivities of human bone marrow mesenchymal stem cells (hBMSCs) when co-cultured with PM-Exos or OM-Exos. Differential microRNAs (miRNAs) between PM-Exos and OM-Exos were sequenced and analyzed. Furthermore, PM-Exos and OM-Exos were incorporated in 3D printed tricalcium phosphate scaffolds to build TEBs for the repair of critical-sized calvarial bone defects in rats. Results showed that PM-Exos and OM-Exos bore similar morphology and size. They expressed representative surface markers of exosomes and could be internalized by hBMSCs to promote cellular migration and proliferation. OM-Exos outweighed PM-Exos in accelerating the osteogenic differentiation of hBMSCs, which might be attributed to the differentially expressed miRNAs. Furthermore, OM-Exos sustainably released from the scaffolds, and the resultant TEB showed a better reparative outcome than that of the PM-Exos group. Our study found that exosomes isolated from osteogenically committed hUCMSCs prominently facilitated the osteogenic differentiation of hBMSCs. TEB grafts functionalized by OM-Exos bear a promising application potential for the repair of large bone defects.

Customized three-dimensional printed ceramic bone grafts for osseous defects: a prospective randomized study

Ridge resorption can result in insufficient bone volume for implant surgery, necessitating bone substitutes to restore the resorption area. Recent advances in computer-aided design and manufacturing enable the use of alloplastic bone graft materials with customizable compositions or shapes. This randomized study evaluated the clinical effectiveness of a customized three-dimensional (3D) printed alloplastic bone material. Sixty patients requiring guided bone regeneration for implant installation following tooth extraction due to alveolar bone resorption were recruited at two institutions. The participants were randomly allocated to either a group that received 3D-printed patient-customized bone graft material or a group that received conventional block bone graft material. Implant installation with bone harvesting was performed approximately 5 months after bone grafting. Histological and radiological assessments of the harvested bone area were performed. The experimental group had a significantly higher percent bone volume and a smaller tissue surface than the control group. Bone volume, bone surface, bone surface/volume ratio, bone surface density (bone surface/total volume), and bone mineral density did not differ significantly between groups. Patient-customized bone graft materials offer convenience and reduce patient discomfort. The findings suggest 3D-printed patient-customized bone graft materials could be used as an alternative for simpler bone grafting procedures.

Quintessential commence of three-dimensional printing in periodontal regeneration-A review

The prime focus of regenerative periodontal therapy is to reconstruct or regenerate the lost periodontium, including both hard and soft tissues. Over the years, periodontics has witnessed different regenerative modalities, such as bone grafts, guided tissue membranes, growth factors, stem cell technology, 3D printing, etc. 3D printing is a newly emerging manufacturing technology that finds applications in diverse fields, including aerospace, defense, art and design, medical and dental field. Originally developed for non-biological applications, 3D printing has undergone modifications to print biocompatible materials and living cells to minimize any potential compromise on cell viability. Thus, the utilisation of 3D printing in the regeneration of lost periodontal tissues represents a novel approach that facilitates optimal cell interactions and promotes the successful regeneration of biological tissues.

Mechanism and application of 3D-printed degradable bioceramic scaffolds for bone repair

Bioceramics have attracted considerable attention in the field of bone repair because of their excellent osteogenic properties, degradability, and biocompatibility. To resolve issues regarding limited formability, recent studies have introduced 3D printing technology for the fabrication of bioceramic bone repair scaffolds. Nevertheless, the mechanisms by which bioceramics promote bone repair and clinical applications of 3D-printed bioceramic scaffolds remain elusive. This review provides an account of the fabrication methods of 3D-printed degradable bioceramic scaffolds. In addition, the types and characteristics of degradable bioceramics used in clinical and preclinical applications are summarized. We have also highlighted the osteogenic molecular mechanisms in biomaterials with the aim of providing a basis and support for future research on the clinical applications of degradable bioceramic scaffolds. Finally, new developments and potential applications of 3D-printed degradable bioceramic scaffolds are discussed with reference to experimental and theoretical studies.

Unraveling the potential of 3D bioprinted immunomodulatory materials for regulating macrophage polarization: State-of-the-art in bone and associated tissue regeneration

Macrophage-assisted immunomodulation is an alternative strategy in tissue engineering, wherein the interplay between pro-inflammatory and anti-inflammatory macrophage cells and body cells determines the fate of healing or inflammation. Although several reports have demonstrated that tissue regeneration depends on spatial and temporal regulation of the biophysical or biochemical microenvironment of the biomaterial, the underlying molecular mechanism behind immunomodulation is still under consideration for developing immunomodulatory scaffolds. Currently, most fabricated immunomodulatory platforms reported in the literature show regenerative capabilities of a particular tissue, for example, endogenous tissue (e.g., bone, muscle, heart, kidney, and lungs) or exogenous tissue (e.g., skin and eye). In this review, we briefly introduced the necessity of the 3D immunomodulatory scaffolds and nanomaterials, focusing on material properties and their interaction with macrophages for general readers. This review also provides a comprehensive summary of macrophage origin and taxonomy, their diverse functions, and various signal transduction pathways during biomaterial-macrophage interaction, which is particularly helpful for material scientists and clinicians for developing next-generation immunomodulatory scaffolds. From a clinical standpoint, we briefly discussed the role of 3D biomaterial scaffolds and/or nanomaterial composites for macrophage-assisted tissue engineering with a special focus on bone and associated tissues. Finally, a summary with expert opinion is presented to address the challenges and future necessity of 3D bioprinted immunomodulatory materials for tissue engineering.

Efficacy and Safety of Antibiotic Impregnated Microporous Nanohydroxyapatite Beads for Chronic Osteomyelitis Treatment: A Multicenter, Open-Label, Prospective Cohort Study

Chronic osteomyelitis is still a serious health problem that causes disabling conditions and has an impact on the quality of life. The objective of this study was to determine the clinical efficacy and safety of localized antibiotics delivery via impregnated microporous nanohydroxyapatite (nHA-ATB) beads for chronic osteomyelitis treatment. A total of 62 patients were enrolled in this study. After radical surgical debridement, the bone defect was filled with three types of antibiotics (vancomycin or gentamicin or fosfomycin) impregnated HA beads. The follow-up period was 48 weeks. It was found that the success rate was approximately 98% with a re-infection in only one patient. Quality of life of all patients after treatment improved significantly over time. Systemic exposure to vancomycin and gentamicin after beads implantation was limited and high local antibiotics concentrations were found in wound drainage fluid at 24, 48 and 72 h. Blood biochemistry measurements did not show any nephrotoxic or hepatotoxic effects. 20 adverse events were reported, but 90% of the events were resolved without having to remove the beads and the patients recovered. Satisfactory outcomes were observed in terms of success rate, quality of life and adverse effect. nHA-ATB beads impregnated by vancomycin or gentamicin or fosfomycin could potentially be employed as an alternative product of choice for localized antibiotics delivery in chronic osteomyelitis treatment.

Additive Manufacturing of Bioceramic Implants for Restoration Bone Engineering: Technologies, Advances, and Future Perspectives

Treating bone defects is highly challenging because they do not heal on their own inside the patients, so implants are needed to assist in the reconstruction of the bone. Bioceramic implants based on additive manufacturing (AM) are currently emerging as promising treatment options for restoration bone engineering. On the one hand, additively manufactured bioceramic implants have excellent mechanical properties and biocompatibility, which are suitable for bone regeneration. On the other hand, the designable structure and adjustable pores of additively manufactured bioceramic implants allow them to promote suitable cell growth and tissue climbing. Herein, this review unfolds to introduce several frequently employed AM technologies for bioceramic implants. After that, advances in commonly used additively manufactured bioceramic implants, including bioinert ceramic implants, bioactive ceramic implants, and bioceramic/organic composite implants, are categorized and summarized. Finally, the future perspectives of additively manufactured bioceramic implants, in terms of mechanical performance improvement, innovative structural design, biological property enhancement, and other functionalization approaches, are proposed and forecasted. This review is believed to provide some fundamental understanding and cutting-edge knowledge for the additive manufacturing of bioceramic implants for restoration bone engineering.

Comparative assessment of the remineralization characteristics of nano-hydroxyapatite extracted from fish scales and eggshells

OBJECTIVES

Dentine hypersensitivity (DH) is a common concern in dentistry that has the potential to restrict daily activities and harm a person's quality of life. In this study, the remineralization characteristics of nano-hydroxyapatite (nHAp) extracted from waste eggshells and fish scales were comparatively assessed.

MATERIALS AND METHODS

The extraction methods used to obtain nHAp from both fish scales and eggshells are also described. The effect of the extraction process and bio-waste source on the physicochemical characteristics of the nHAp such as Ca/P ratio, functional groups, crystallinity and phase change, and surface morphology are presented in the study. The remineralization properties were evaluated using dentine models (n = 15). A field scanning electron microscope was used to evaluate the effectiveness of the dentine tubules occlusion. The percentage occluded area for all the specimens was evaluated statistically using a one-way analysis of variance (α = 0.05).

RESULTS

The results showed that there were variations in the physicochemical characteristics of the nHAp extracted, including the crystallinity, particle size, and surface morphology, and buffering effects against citric acids. The EnHAp extracted from eggshells had higher crystallinity, superior buffering effects, and smaller particle size compared to the nHAp extracted from fish scales, making it a more favourable material for remineralization of teeth. The statistical evidence showed that there were statistically significant differences in the dentine occluding properties measured in the nHAp (p < 0.001). The highest mean % occluded area was measured with the EnHAp group.

CONCLUSIONS

The findings of this study provide insights into the use of bio-waste materials for the development of sustainable and effective products for oral health care.

Customized 3D printed nanohydroxyapatite bone block grafts for implant sites: a case series

PATIENTS

A case series of 12 patients (mean age, 53.5 years) with horizontal ridge deficiencies had augmentations with customized 3D printed nanohydroxyapatite (3DHA) block grafts prior to implant placement. 3DHA graft materials were fabricated to fit the individual patient defects using DICOMs from CBCT images obtained from each patient. The CBCT images were then converted into the STL file format and 3DHA was reconstructed by 3D printing. Surgical bone augmentation consisted of 3DHA incorporating concentrated growth factors (CGFs) and platelet-rich fibrin (PRF) membrane. At 6 months, a bone biopsy and implantation were performed. The primary outcome was horizontal bone gain after 6 months. The secondary outcomes included information on the clinical outcomes, dimensions, and histomorphometric results.

DISCUSSION

The 3DHA block graft was successful in 10 of 12 patients. Graft adjustment was not required. All 3DHA adapted and fit well at all defect sites. Maximum mean horizontal bone gains were 3.06 ± 1.02 and 3.56 ± 0.23 mm from the DICOMs and STL data sets, respectively. The volume gain was 229.8 ± 82.96 mm³. A low pain score after surgery was reported of 1.41 ± 0.51, while the healing index score increased with a maximum mean of 4.7 ± 0.67. Thirteen implants were placed with good primary stability (ISQ = 65 ± 4.08), without additional guided bone regeneration. Histomorphometric analysis revealed that new bone formation, bone tissue, residual grafts, and connective tissue were 28.6 ± 1.88, 30.48 ± 4.81, 19.82 ± 4.07, and 20.81 ± 4.41%, respectively.

CONCLUSIONS

A customized 3DHA block graft is a viable treatment option for primary implant-site augmentation.