Assembly process of CuHCF/MPA multilayers on gold nanoparticles modified electrode and characterization by electrochemical SPR

Electrochemical Surface Plasmon Resonance Spectroscopy for Investigation of the Initial Process of Lithium Metal Deposition

The initial process of Li-metal electrodeposition on the negative electrode surface determines the charging performance of Li-metal secondary batteries. However, minute depositions or the early processes of nucleation and growth of Li metal are generally difficult to detect under operando conditions. In this study, we propose an optical diagnostic approach to address these challenges. Surface plasmon resonance (SPR) spectroscopy coupled with electrochemical operation is a promising technique that enables the ultrasensitive detection of the initial stage of Li-metal electrodeposition. The SPR is excited in a thin copper film deposited on a glass substrate, which also serves as a current collector enabling electrochemical Li-metal deposition. For a propylene carbonate (PC)-based Li-ion battery electrolyte, under both cyclic voltammetry and constant-current operation, Li-metal deposition is readily detected by changes in the SPR absorption dip in the reflectance spectrum. Electrochemical SPR is highly sensitive to metal deposition, with a demonstrated capability of detecting an average thickness of approximately 0.1 nm, corresponding to a few atomic layers of Li. To identify the growth mechanism, the SPR reflectance spectra of various possible Li-metal deposition processes were simulated. Comparison of the simulated spectra with the experimental data found good agreement with the well-known nucleation and growth model for Li-metal deposition from PC-based electrolytes. The demonstrated operando electrochemical SPR measurement should be a valuable tool for basic research on the initial Li-metal deposition process.

Optical method for predicting the composition of self-assembled monolayers of mixed thiols on surfaces coated with silver nanoparticles

With a simple optical method, based on UV-vis absorption spectra on glass slides, it is possible to predict the composition of self-assembled monolayers of mixed thiols, grafted on monolayers of silver nanoparticles. Glass slides are modified with the layer-by-layer technique, first forming a monolayer of mercaptopropyltrimethoxysilane, then grafting a monolayer of silver nanoparticles on it. These surfaces are further coated by single or mixed thiol monolayers, by dipping the slides in toluene solutions of the chosen thiols. Exchange constants are calculated for the competitive deposition between the colorless 1-dodecanethiol or PEG5000 thiol and BDP-SH, with the latter being a thiol-bearing molecule containing the strongly absorbing BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) moiety, synthesized on purpose. The constants are calculated by determining the fraction of BDP-SH deposited on the surface from a solution with a given molar fraction, directly measuring the absorption spectra of BDP-SH on the slides. Then, the exchange constant for the competitive deposition between 1-dodecanethiol and PEG5000 thiol is calculated by combining their exchange constants with BDP-SH. This allows to predict the fraction of the two colorless thiols coating the silver nanoparticles slides obtained from a toluene solution with a given molar fraction, for example, of PEG5000 thiol. The correctness of the calculated surface fraction is verified by studying the coating competition between 1-dodecanethiol and a PEG5000 thiol remotely modified with a strongly absorbing fluorescein fragment.

Electrochemical Biosensors - Sensor Principles and Architectures

Quantification of biological or biochemical processes are of utmost importance for medical, biological and biotechnological applications. However, converting the biological information to an easily processed electronic signal is challenging due to the complexity of connecting an electronic device directly to a biological environment. Electrochemical biosensors provide an attractive means to analyze the content of a biological sample due to the direct conversion of a biological event to an electronic signal. Over the past decades several sensing concepts and related devices have been developed. In this review, the most common traditional techniques, such as cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, and various field-effect transistor based methods are presented along with selected promising novel approaches, such as nanowire or magnetic nanoparticle-based biosensing. Additional measurement techniques, which have been shown useful in combination with electrochemical detection, are also summarized, such as the electrochemical versions of surface plasmon resonance, optical waveguide lightmode spectroscopy, ellipsometry, quartz crystal microbalance, and scanning probe microscopy. The signal transduction and the general performance of electrochemical sensors are often determined by the surface architectures that connect the sensing element to the biological sample at the nanometer scale. The most common surface modification techniques, the various electrochemical transduction mechanisms, and the choice of the recognition receptor molecules all influence the ultimate sensitivity of the sensor. New nanotechnology-based approaches, such as the use of engineered ion-channels in lipid bilayers, the encapsulation of enzymes into vesicles, polymersomes, or polyelectrolyte capsules provide additional possibilities for signal amplification. In particular, this review highlights the importance of the precise control over the delicate interplay between surface nano-architectures, surface functionalization and the chosen sensor transducer principle, as well as the usefulness of complementary characterization tools to interpret and to optimize the sensor response.

Synthesis and electrochemical applications of gold nanoparticles

This review covers recent advances in synthesis and electrochemical applications of gold nanoparticles (AuNPs). Described approaches include the synthesis of AuNPs via designing and choosing new protecting ligands; and applications in electrochemistry of AuNPs including AuNPs-based bioelectrochemical sensors, such as direct electrochemistry of redox-proteins, genosensors and immunosensors, and AuNPs as enhancing platform for electrocatalysis and electrochemical sensors.