Ethylene glycol electrooxidation in alkaline medium at multi-metallic Pt based catalysts

Steering the Selective Production of Glycolic Acid by Electrocatalytic Oxidation of Ethylene Glycol with Nanoengineered PdBi-Based Heterodimers

Heterodimers of metal nanocrystals (NCs) with tailored elemental distribution have emerged as promising candidates in the field of electrocatalysis, owing to their unique structures featuring heterogeneous interfaces with distinct components. Despite this, the rational synthesis of heterodimer NCs with similar elemental composition remains a formidable challenge, and their impact on electrocatalysis has remained largely elusive. In this study, Pd@Bi-PdBi heterodimer NCs are synthesized through an underpotential deposition (UPD)-directed growth pathway. In this pathway, the UPD of Bi promotes a Volmer-Weber growth mode, allowing for judicious modulation of core-satellite to heterodimer structures through careful control of supersaturation and growth kinetics. Significantly, the heterodimer NCs are employed in the electrocatalytic process of ethylene glycol (EG) with high activity and selectivity. Compared with pristine Pd octahedra and common PdBi alloy NC, the unique heterodimer structure of the Pd@Bi-PdBi heterodimer NCs endows them with the highest electrocatalytic performance of EG and the best selectivity (≈93%) in oxidizing EG to glycolic acid (GA). Taken together, this work not only heralds a new strategy for UPD-directed synthesis of bimetallic NCs, but also provides a new design paradigm for steering the selectivity of electrocatalysts.

Stimulation of ethylene glycol electrooxidation on electrodeposited Ni–PbO2–GN nanocomposite in alkaline medium

In this work, a novel system composed of non-precious nickel-based metal oxide/reduced graphene oxide nanocomposite (Ni–PbO2–GN) is used for electrooxidation of ethylene glycol (EG) in 1.0 M NaOH solution and compares its activity with that of Ni, Ni–GN, and Ni–PbO2. The facile electrodeposition technique is used to prepare the catalysts on glassy carbon (GC) substrates. The outcomes of electrochemical measurements show a high performance towards EG oxidation is obtained for Ni-nanocomposite electrodes compared to that of Ni mainly due to their higher surface areas. The excellent electrocatalytic properties of the Ni-nanocomposite could be ascribed to the synergistic contributions of PbO2 and graphene (GN) nano-sheets that help the reduction of Ni grains. A smaller charge transfer resistance value of 34.5 Ω cm2 for EG oxidation reaction at + 360 mV is recorded for GC/Ni–PbO2–GN compared to the other prepared electrodes. Moreover, it exhibits higher kinetic parameters of EG such as diffusion coefficient (D = 3.9 × 10–10 cm2 s−1) and charge transfer rate constant (ks = 32.5 mol−1 cm3 s−1). The overall performance and stability of the prepared catalysts towards EG electrooxidation have been estimated to be in the order of GC/Ni–PbO2–GN > GC/Ni–GN > GC/Ni–PbO2 > GC/Ni.

Graphical abstract

p-d Orbital Hybridization Induced by a Monodispersed Ga Site on a Pt3 Mn Nanocatalyst Boosts Ethanol Electrooxidation

Constructing monodispersed metal sites in heterocatalysis is an efficient strategy to boost their catalytic performance. Herein, a new strategy using monodispersed metal sites to tailor Pt-based nanocatalysts is addressed by engineering unconventional p-d orbital hybridization. Thus, monodispersed Ga on Pt₃ Mn nanocrystals (Ga-O-Pt₃ Mn) with high-indexed facets was constructed for the first time to drive ethanol electrooxidation reaction (EOR). Strikingly, the Ga-O-Pt₃ Mn nanocatalyst shows an enhanced EOR performance with achieving 8.41 times of specific activity than that of Pt/C. The electrochemical in situ Fourier transform infrared spectroscopy results and theoretical calculations disclose that the Ga-O-Pt₃ Mn nanocatalyst featuring an unconventional p-d orbital hybridization not only promote the C-C bond-breaking and rapid oxidation of -OH of ethanol, but also inhibit the generation of poisonous CO intermediate species. This work discloses a promising strategy to construct a novel nanocatalysts tailored by monodispersed metal site as efficient fuel cell catalysts.

Effect of Anode Material on Electrochemical Oxidation of Low Molecular Weight Alcohols-A Review

The growing climate crisis inspires one of the greatest challenges of the 21st century-developing novel power sources. One of the concepts that offer clean, non-fossil electricity production is fuel cells, especially when the role of fuel is played by simple organic molecules, such as low molecular weight alcohols. The greatest drawback of this technology is the lack of electrocatalytic materials that would enhance reaction kinetics and good stability under process conditions. Currently, electrodes for direct alcohol fuel cells (DAFCs) are mainly based on platinum, which not only provides a poor reaction rate but also readily deactivates because of poisoning by reaction products. Because of these disadvantages, many researchers have focused on developing novel electrode materials with electrocatalytic properties towards the oxidation of simple alcohols, such as methanol, ethanol, ethylene glycol or propanol. This paper presents the development of electrode materials and addresses future challenges that still need to be overcome before direct alcohol fuel cells can be commercialized.

Hydrogen production by electrochemical reaction using ethylene glycol with terephthalic acid

Hydrogen production by electrolysis reaction of ethylene glycol and terephthalic acid in alkaline solution. When ethylene glycol and terephthalic acid were added to water together, more hydrogen was produced.

Alkaline Anion-Exchange Membrane Fuel Cells: Challenges in Electrocatalysis and Interfacial Charge Transfer

Alkaline anion-exchange membrane (AAEM) fuel cells have attracted significant interest in the past decade, thanks to the recent developments in hydroxide-anion conductive membranes. In this article, we compare the performance of current state of the art AAEM fuel cells to proton-exchange membrane (PEM) fuel cells and elucidate the sources of various overpotentials. While the continued development of highly conductive and thermally stable anion-exchange membranes is unambiguously a principal requirement, we attempt to put the focus on the challenges in electrocatalysis and interfacial charge transfer at an alkaline electrode/electrolyte interface. Specifically, a critical analysis presented here details the (i) fundamental causes for higher overpotential in hydrogen oxidation reaction, (ii) mechanistic aspects of oxygen reduction reaction, (iii) carbonate anion poisoning, (iv) unique challenges arising from the specific adsorption of alkaline ionomer cation-exchange head groups on electrocatalysts surfaces, and (v) the potential of alternative small molecule fuel oxidation. This review and analysis encompasses both the precious and nonprecious group metal based electrocatalysts from the perspective of various interfacial charge-transfer phenomena and reaction mechanisms. Finally, a research roadmap for further improvement in AAEM fuel cell performance is delineated here within the purview of electrocatalysis and interfacial charge transfer.

Electrocatalytic Oxidation of Methanol, Ethanol, and Glycerol on Ni(OH)2 Nanoparticles Encapsulated with Poly[Ni(salen)] Film

This study describes a systematic investigation of the electrocatalytic activity of poly[Ni(salen)] films, as catalysts for the electro-oxidation of Cn alcohols (Cn = methanol, ethanol, and glycerol) in alkaline medium. The [Ni(salen)] complex was electropolymerized on a glassy carbon surface and electrochemically activated in NaOH solution by cyclic voltammetry. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy results indicate that during the activation step the polymeric film hydrolyzes, leading to the formation of β-Ni(OH)₂ spherical nanoparticles, with an average size of 2.4 ± 0.5 nm, encapsulated with the poly[Ni(salen)] film. Electrochemical results obtained together with the in situ Fourier transform infrared spectroscopy confirm that the electro-oxidation of methanol, ethanol, and glycerol occurs by involving a cycling oxidation of β-Ni(OH)₂ with the formation of β-NiOOH species, followed by the charge transfer to the alcohols, which regenerates β-Ni(OH)₂. Analyses of the oxidation products at low potentials indicate that the major product obtained during the oxidation of methanol and glycerol is the formate, while the oxidation of ethanol leads to the formation of acetate. On the other hand, at high potentials (E = 0.6 V), there is evidence that the oxidation of Cn alcohols leads to carbonate ions as an important product.

In Situ Construction of Small Pt NPs Embedded in 3D Spherical Porous Carbon as an Electrocatalyst for Liquid Fuel Oxidation with High Performance

The realization of small platinum (Pt) nanoparticles (NPs) embedded in conductive porous carbon would largely improve the catalytic activity effectively with more durability, although there remain challenges to achieve such hybrid nanostructures via a simple synthetic route. Here, an efficient and facile profile was demonstrated for the synthesis of one kind of uniform three-dimensional (3D) spherical Pt/C composite electrocatalyst with small monodispersed Pt NPs embedded in the matrix of 3D spherical porous carbon derived from the corresponding spherically polymeric Pt(II) complex. The monodispersed Pt NPs within the uniform 3D Pt/C composite are ∼4.4 nm and they are dispersed homogeneously within the matrix of 3D spherical porous carbon. Investigations showed that the 3D Pt/C composite exhibits high catalytic performances as compared to the commercial catalyst of Pt black for oxidation reactions of ethylene glycol, ethanol, and methanol. This strategy developed in the present study would be available for possible fabrication of some other active 3D porous carbon-supported Pt-based catalysts including their bimetallic and multimetallic counterparts.

Facile Aqueous-Phase Synthesis of the PtAu/Bi2O3 Hybrid Catalyst for Efficient Electro-Oxidation of Ethanol

In this work, we present a facile aqueous-phase synthesis of a hybrid catalyst consisting of PtAu alloy supported on Bi₂O₃ microspheres. Multistep reduction of HAuCl₄ and K₂PtCl₄ salts on Bi₂O₃ and subsequent annealing lead to the formation of this hybrid catalyst. To the best of our knowledge, this is the first report of using Bi₂O₃ as a catalyst support in fuel cell applications. The material was characterized by powder X-ray diffraction and various microscopic techniques. This composite showed remarkable activity as well as stability toward the electro-oxidation of ethanol in comparison to commercially available Pt/C. The order of the reactivity was found to be commercial Pt/C (50.4 mA/m²mg_Pt^-1) < Pt/Bi₂O₃(10) (108 mA/m²mg_Pt^-1) < PtAu/Bi₂O₃(10) (459 mA/m²mg_Pt^-1). The enhancement in the activity can be explained through cooperative effects, namely, ligand effects of gold and Bi₂O₃ support, which helps in removing carbon monoxide molecules to avoid the poisoning of the Pt active sites.

Platinum–copper doped poly(sulfonyldiphenol/cyclophosphazene/benzidine)–graphene oxide composite as an electrode material for single stack direct alcohol alkaline fuel cells

Schematic representation of the preparation of a metal nanoparticle (Pt and Pt–Cu)-decorated poly(SDP/CP/BZ)–GO composite.

Trimetallic PtCuCo hollow nanospheres with a dendritic shell for enhanced electrocatalytic activity toward ethylene glycol electrooxidation

In this work, by utilizing galvanic replacement reaction, a simple method for the synthesis of trimetallic PtCuCo hollow nanospheres with a dendritic shell is demonstrated. The compositions of the nanospheres can be well controlled, and the electrocatalytic activity can also be modulated by adjusting their compositions. Electrocatalytic results show that all of the as-prepared trimetallic PtCuCo nanomaterials show better catalytic performance toward ethylene glycol electrooxidation than the commercial catalyst.

A new class of electrocatalysts of supporting Pt on an Engel-Brewer alloy substrate: a demonstration for oxidation of ethylene glycol

A novel electrocatalytic surface consisting of a Pt monolayer (ML) on an Hf-Ir alloy substrate demonstrated significantly higher activity (six times) and higher selectivity to CO2 formation than bulk Pt in oxidizing ethylene glycol. This enhanced performance could be associated with the high reducibility of Hf oxide and altered electronic property of the Pt ML.

CO2-free power generation on an iron group nanoalloy catalyst via selective oxidation of ethylene glycol to oxalic acid in alkaline media

An Fe group ternary nanoalloy (NA) catalyst enabled selective electrocatalysis towards CO2-free power generation from highly deliverable ethylene glycol (EG). A solid-solution-type FeCoNi NA catalyst supported on carbon was prepared by a two-step reduction method. High-resolution electron microscopy techniques identified atomic-level mixing of constituent elements in the nanoalloy. We examined the distribution of oxidised species, including CO2, produced on the FeCoNi nanoalloy catalyst in the EG electrooxidation under alkaline conditions. The FeCoNi nanoalloy catalyst exhibited the highest selectivities toward the formation of C2 products and to oxalic acid, i.e., 99 and 60%, respectively, at 0.4 V vs. the reversible hydrogen electrode (RHE), without CO2 generation. We successfully generated power by a direct EG alkaline fuel cell employing the FeCoNi nanoalloy catalyst and a solid-oxide electrolyte with oxygen reduction ability, i.e., a completely precious-metal-free system.

PtIr-WO3 nanostructured alloy for electrocatalytic oxidation of ethylene glycol and ethanol

In this article, we characterized tungsten oxide-decorated carbon-supported PtIr nanoparticles and tested it for the electrooxidation reactions of ethylene glycol and ethanol. Phase and morphological evaluation of the proposed electrocatalytic materials are investigated employing various characterization techniques including X-ray diffraction (XRD) and transmission electron microscopy (TEM). Electrochemical diagnostic measurements such as cyclic voltammetry, chronoamperometry, and linear sweep voltammetry revealed that the tungsten oxide-modified PtIr/Vulcan nanoparticles have higher catalytic activity for ethylene glycol and ethanol electrooxidation than that of PtIr/Vulcan. A significant enhancement for electrooxidation of CO-adsorbate monolayers occurred in the presence of a transition metal oxide relative to that of pure PtIr/Vulcan electrocatalyst. The likely reasons for this are modification on the Pt center electronic structure and/or increasing the population of reactive oxo groups at the PtIr/Vulcan electrocatalytic interface in different potential regions.

AuPd/polyaniline as the anode in an ethylene glycol microfluidic fuel cell operated at room temperature

AuPd/polyaniline was used for the first time, for ethylene glycol electrooxidation in a microfluidic fuel cell operated at room temperature.