Synergistic membrane of ZrO2/self-doped polyaniline nanofibres fabricated by controllable electrodeposition for DNA hybridization detection

Self-doped conducting polymers in biomedical engineering: Synthesis, characterization, current applications and perspectives

Recent studies willingly agree that conducting polymers (CPs) are attractive materials for biomedical engineering purposes, mainly because of their unique physicochemical characteristics combining electrical conductivity and high biocompatibility. Nevertheless, the applicability of CPs is restricted by their limited stability under physiological conditions, associated with a decrease in electrical conductivity upon dedoping. Accordingly, modifying chemical structure of CPs to exhibit a self-doping effect seems to be an appealing approach aimed to enhance their functionality. The aim of this review is to provide a current state-of-the-art in the research concerning self-doped CPs, particularly those with potential biomedical applications. After presenting a library of available structure modifications, we describe their physicochemical characteristics, focusing on achievable conductivities, electrochemical, optical and mechanical behaviour, as well as biological properties. To highlight high applicability of self-doped CPs in biomedical engineering, we elaborate on biomedical areas benefiting most from using this type of conducting materials.

Label-free impedimetric sensing platform for microRNA-21 based on ZrO2-reduced graphene oxide nanohybrids coupled with catalytic hairpin assembly amplification

Herein, a sensitive electrochemical impedance sensor was constructed based on ZrO2-reduced graphene oxide (RGO)-modified electrode coupled with the catalytic hairpin assembly signal amplification strategy. Electrochemical impedance spectroscopy (EIS) was used to detect microRNA (miRNA) using the change in electron transfer resistance (ΔR et) originated from nucleic acid hybridization on the electrode surface. MiRNA-21 was used as a model to verify this strategy. The results indicated that ΔR et exhibited a good linear relationship with the concentration of miRNA-21 in the range from 1.0 × 10-14 mol L-1 to 1.0 × 10-10 mol L-1 with a detection limit of 4.3 × 10-15 mol L-1 (S/N = 3). Additionally, this sensor exhibited good selectivity, and it could be applied to detect miRNA-21 in human serum samples and measure the expression levels of miRNA-21 in human breast cancer cell lines (MCF-7); thus, this sensor has great potential in cancer diagnosis.

Development of a novel electrochemical DNA biosensor based on elongated hexagonal-pyramid CdS and poly-isonicotinic acid composite film

Three CdS materials with different shapes (i.e., irregular, rod-like, and elongated hexagonal-pyramid) were hydrothermally synthesized through controlling the molar ratio of Cd(2+) to thiourea. Electrochemical experiments showed that the elongated hexagonal-pyramid CdS (eh-CdS) modified on glassy carbon electrode (GCE) had the higher electrical conductivity than the other two forms. Then the eh-CdS modified GCE was further modified with a layer of poly-isonicotinic acid (PIA) through electro-polymerization in IA solution to enhance the stability and functionality of the interface. The layer-by-layer modification process was characterized by atomic force microscopy and electrochemistry. Then 5'-amino functionalized DNA was immobilized on the electrode surface through coupling with the carboxylic groups derived from PIA-eh-CdS composite film. The hybridization performance of the developed biosensor was evaluated using methylene blue as redox indicator, and the results showed that the peak currents of methylene blue varied with target concentrations in a wide linear range from 1.0 × 10(-14)M to 1.0 × 10(-9)M with a low detection limit of 3.9 × 10(-15)M. The biosensor also showed high stability and good discrimination ability to the one-base, three-base mismatched and non-complementary sequence.

A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase: tunable direct bioelectrocatalysis

Differently sulfonated polyaniline copolymers have been utilized as matrices for the entrapment of PQQ-GDH, resulting in a direct bioelectrocatalytic response together with a colour change upon addition of the substrate.

Differently substituted sulfonated polyanilines: the role of polymer compositions in electron transfer with pyrroloquinoline quinone-dependent glucose dehydrogenase

Sulfonated polyanilines have become promising building blocks in the construction of biosensors, and therefore we use here differently substituted polymer forms to investigate the role of their structural composition and properties in achieving a direct electron transfer with the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). To this end, new copolymers containing different ratios of 2-methoxyaniline-5-sulfonic acid (MAS), 3-aminobenzenesulfonic acid (ABS) and 3-aminobenzoic acid (AB) units have been chemically synthesized. All polymers have been studied with respect to their ability to react directly with PQQ-GDH. This interaction has been monitored initially in solution, and subsequently on electrode surfaces. The results show that only copolymers with MAS and aniline units can directly react with PQQ-GDH in solution; the background can be mainly ascribed to the emeraldine salt redox state of the polymer, allowing rather easy reduction. However, when polymers and the enzyme are immobilized on the surface of carbon nanotube-containing electrodes, direct bioelectrocatalysis is also feasible in the case of copolymers composed of ABS/AB and MAS/AB units, existing initially in pernigraniline base form. This verifies that a productive interaction of the enzyme with differently substituted polymers is feasible when the electrode potential can be used to drive the reaction towards the oxidation of the substrate-reduced enzyme. These results clearly demonstrate that enzyme electrodes based on sulfonated polyanilines and direct bioelectrocatalysis can be successfully constructed.

Electrochemical impedimetric DNA sensing based on multi-walled carbon nanotubes-SnO2-chitosan nanocomposite

A sensitive electrochemical impedimetric DNA biosensor based on the integration of tin oxide (SnO2) nanoparticles, chitosan (CHIT) and multi-walled carbon nanotubes (MWNTs) is presented in this paper. The MWNTs-SnO2-CHIT composite modified gold electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Compared with individual MWNTs-CHIT, SnO2-CHIT and bare gold electrode, this composite showed the most obvious electrochemical signal of the redox probe [Fe(CN)6](3-/4-). According to the change of the electron transfer resistance (R(et)) induced by the hybridization, target DNA was successfully detected via EIS. This DNA electrochemical biosensor was applied to detect phosphinothricin acetyltransferase (PAT) gene in transgenic corn. The synergistic effect of the MWNTs-SnO2-CHIT remarkably enhanced DNA immobilization and hybridization detection. The dynamic detection range was from 1.0×10(-11) mol/L to 1.0×10(-6) mol/L with a detection limit of 2.5×10(-12) mol/L. This sensing platform showed inner advantage, such as simplicity, good stability, and high sensitivity.

Recent progress in the design of nanofiber-based biosensing devices

This review addresses recent progress made in the use of nanofibers for analyte detection and sample preparation within analytical devices. The unique characteristics of nanofibers make them ideal for incorporation within sensors designed to allow for sensitive detection of clinical, environmental, and food safety analytes. In particular, the extremely large surface area provided by nanofiber mats and arrays drastically increases the availability of immobilization sites within biosensors. Additionally, nanofibers can be made from a variety of biocompatible materials and can be functionalized through the incorporation of nanoscale materials within spinning dopes or polymerization solutions. Finally, methods of nanofiber formation are largely well understood, allowing for controlled synthesis of nanofiber mats with specific sizes, shapes, pore sizes, and tensile strengths. In this paper, we present a survey of the different materials that are currently being used to produce nanofibers for use within sensing devices. In addition, we compare the limits of detection and linear ranges of nanofiber-based sensors and conventional sensors to determine if detection is improved by the inclusion of nanoscale materials.