A combined electrochemical and theoretical study of N,N′-bis(benzimidazole-2yl-ethyl)-1,2-diaminoethane as a new corrosion inhibitor for carbon steel surface

Development of a 2D Network of Zinc Organophosphate with an 8-Membered Ring Core Having Corrosion Resistance Properties

A 2D framework, i.e., zinc organophosphate [Zn(tmbiph)(solv)]2 (tmbiphH4 = tetramethyl-[1,1'-biphenyl]-4,4'-diyl bis(dihydrogen phosphate); solv = 2H2O) with an eight-membered ring core has been developed. The hierarchical and rational design of the zinc organophosphate has been achieved by carefully designing an organic bisphosphate ligand with two phosphate monoester groups connected through extended aromatic rings with methyl groups at ortho positions. The development of the 2D network does not require any ancillary ligand due to participating two phosphate groups in the coordination. The molecular structure of the zinc phosphate material was determined using single-crystal X-ray diffraction technique. The corresponding Co and Cu organophosphate materials have also been obtained using the same synthetic method; however, these compounds could not be confirmed structurally due to nondiffractive crystal quality. The structure of zinc organophosphate obtained through single-crystal X-ray diffraction has also been supported by theoretical calculations using density function theory. Furthermore, the zinc organophosphate material has been employed as an corrosion inhibitor for mild steel. The effect of the zinc phosphate framework on mild steel in 1 M HCl was investigated using polarization and electrochemical impedance spectroscopy. This study suggests that such phosphate inhibitors can be employed in the form of a thin protective layer on the electrode surface.

Evaluation of 2-Mercaptobenzimidazole Derivatives as Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

This research aimed to develop a better understanding of the corrosion inhibition of the mild steel in acidic medium by new organic molecules. For this purpose, two new compounds namely, 2,3-dihydrobenzo[4,5]imidazo[2,1-b]thiazole (2-BIT) and 3,4-dihydro-2H-benzo[4,5]imidazo[2,1-b]thiazole (3-BIT) were synthesized and evaluated for mild steel (MS) corrosion in HCl. Analyses were carried out using weight loss measurements, electrochemical techniques, and scanning electron microscope (SEM). The adsorption of inhibitors onto the steel surface follows the Langmuir adsorption model. Generally, results showed that the corrosion inhibition efficiency of the investigated molecules was found to increase with increased concentration of inhibitors. Electrochemical tests, i.e., electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) techniques, showed that the addition of our investigated inhibitors decreases the dissolution of the metal and generally act as mixed-type inhibitors. In addition, the influence of temperature (from 303 to 333 K) on the corrosion inhibition was studied, and the results demonstrated that with an increase in temperature, the inhibition efficiency decrease. SEM results confirmed that the inhibition process is due to a protective film that prevents corrosion. Similarly, the results showed that the inhibitory efficiencies reach 93% at 5 × 10−3 M in the case of inhibitor 3-BIT. These results revealed that this compound could effectively control and reduce the corrosion rate of mild steel in the corrosion test solution.

Electrochemical study of commercial and synthesized green corrosion inhibitors for N80 steel in acidic liquid

The present paper deals with the investigation of two synthesized benzimidazole derivatives (BZs) as corrosion inhibitors for N80 steel under static conditions in a 15% HCl corrosive environment and in the temperature range of 30 to 90 °C.

Effect of Electron Donating Functional Groups on Corrosion Inhibition of J55 Steel in a Sweet Corrosive Environment: Experimental, Density Functional Theory, and Molecular Dynamic Simulation

Benzimidazole derivatives were synthesized, characterized, and tested as a corrosion inhibitor for J55 steel in a 3.5 wt % NaCl solution saturated with carbon dioxide. The experimental results revealed that inhibitors are effective for steel protection, with an inhibition efficiency of 94% in the presence of 400 mg/L of inhibitor. The adsorption of the benzimidazole derivatives on J55 steel was found to obey Langmuir’s adsorption isotherm. The addition of inhibitors decreases the cathodic as well anodic current densities and significantly strengthens impedance parameters. X-ray photoelectron spectroscopy (XPS) was used for steel surface characterization. Density functional theory (DFT) and molecular dynamic simulation (MD) were applied for theoretical studies.