Electrochemical detection of dioxygen and hydrogen peroxide by hemin immobilized on chemically converted graphene

Electrochemical Biosensors Employing Natural and Artificial Heme Peroxidases on Semiconductors

Heme peroxidases are widely used as biological recognition elements in electrochemical biosensors for hydrogen peroxide and phenolic compounds. Various nature-derived and fully synthetic heme peroxidase mimics have been designed and their potential for replacing the natural enzymes in biosensors has been investigated. The use of semiconducting materials as transducers can thereby offer new opportunities with respect to catalyst immobilization, reaction stimulation, or read-out. This review focuses on approaches for the construction of electrochemical biosensors employing natural heme peroxidases as well as various mimics immobilized on semiconducting electrode surfaces. It will outline important advances made so far as well as the novel applications resulting thereof.

Sonochemical synthesis and anchoring of zinc oxide on hemin-mediated multiwalled carbon nanotubes-cellulose nanocomposite for ultra-sensitive biosensing of H2O2

In this work, the metal oxide and biopolymer nanocomposites on multiwalled carbon nanotubes (MWCNT) were prepared using a simple sonochemical method. The hexagonal nanorods of zinc oxide (ZnO NR) were synthesized by probe sonication (frequency = 20 kHz, amplitude = 50) method and were integrated on ultrasonically functionalized MWCNT-cellulose nanocrystals (MWCNT-CNC) for the first time. The stable hemin bio-composites also were prepared using the bath sonication (37 kHz of frequency, 150 W of power) method, and was used for the selective and ultrasensitive electrochemical detection of H₂O₂. The UV-Vis spectroscopy studies confirmed the presence of native hemin on MWCNT-CNC/ZnO NR nanocomposite. Cyclic voltammetry studies revealed that an enhanced redox electrochemical behaviour of hemin was observed on hemin immobilised MWCNT-CNC/ZnO NR nanocomposite than that of other hemin modified electrodes. Also, the MWCNT-CNC/ZnO NR/hemin modified SPCE showed 2.3 folds higher electrocatalytic activity with a lower reduction potential (-0.2 V) towards H₂O₂ than that of other investigated hemin modified electrodes including hemin/MWCNT and hemin/CNC-ZnO. The fabricated biosensor displayed a stable amperometric response (-0.2 V vs Ag/AgCl) in the linear concentration of H₂O₂ ranging up to 4183.3 µM with a lower detection limit of 4.0 nM.

Enhanced reversible redox activity of hemin on cellulose microfiber integrated reduced graphene oxide for H2O2 biosensor applications

In recent years, the carbohydrate polymers incorporated composite materials have shown significant interest in the bioanalytical chemistry due to their enhanced catalytic performances of various enzymes or mimics. This paper reports the fabrication of novel H₂O₂ biosensor using a hemin immobilized reduced graphene oxide-cellulose microfiber composite (hemin/RGO-CMF). The RGO-CMF composite was prepared by the reduction of GO-CMF composite using vitamin C as a reducing agent. Various physio-chemical methods have applied for the characterization of RGO-CMF composite. Cyclic voltammetry results revealed that the hemin/RGO-CMF composite shows a better redox electrochemical behavior than hemin/RGO and hemin/GO-CMF. Under optimized conditions, the hemin/RGO-CMF composite exhibit a linear response to H₂O₂ in the concentration range from 0.06 to 540.6 μM with the lower detection limit of 16 nM. The sensor also can able to detect the H₂O₂ in commercial contact lens solution and milk samples with functional recovery, which authenticates the potential ability in practical sensors.

Enhancement of Electrochemical Performance of Bilirubin Oxidase Modified Gas Diffusion Biocathode by Porphyrin Precursor

Recent studies have focused on tailoring the catalytic currents of multicopper oxidase (MCO) enzymes-based biocathodes to enhance oxygen reduction. Biocathodes modified with natural substrates specific for MCO enzymes demonstrated drastic improvement for oxygen reduction. Performance of 1-pyrenebutanoic acid, succinimidyl ester (PBSE), and 2,5-dimethyl-1-phenyl-1H-pyrrole-3-carbaldehyde (Di-Carb) oriented bilirubin oxidase (BOx) modified gas diffusion biocathode has been highly improved by incorporating hematin, a porphyrin precursor as electron transfer enhancement moiety. Hematin modified electrodes demonstrated direct electron transfer reaction of BOx exhibiting larger O2 reduction in current density in phosphate buffer solution (pH 7.0) without the need of a mediator. A remarkable improvement in the catalytic currents with 2.5-fold increase compared to non-hematin modified oriented BOx electrodes was achieved. Moreover, a mediatorless and compartmentless glucose/O2 biofuel cell based on DET-type bioelectrocatalysis via the BOx cathode and the glucose dehydrogenase (GDH) anode demonstrated peak power densities of 1 mW/cm2 at pH 7.0 with 100 mM glucose/10 mM NAD fuel. The maximum current density of 1.6 mA/cm2 and the maximum power density of 0.4 mW/cm2 were achieved at 300 mV with nonmodified BOx cathode, while 3.5 mA/cm2 and 1.1 mW/cm2 of current and power density were achieved with hematin modified cathode. The performance improved 2.4 times which attributes to the hematin acting as a natural precursor and activator for BOx activity enhancement.

Axial Coordination Site-Turned Surface Confinement, Electron Transfer, and Bio-Electrocatalytic Applications of a Hemin Complex on Graphitic Carbon Nanomaterial-Modified Electrodes

Understanding the relation between the chemical bonding and the electron-transfer (ET) reaction of surface-confined hemin (a five-coordinated Fe-porphyrin-with-chlorine complex) is a special interest in the biomimicking studies of heme proteins. Owing to the difficulty in ET function, scanty electrochemical reports of hemin in aqueous solution were reported. It has been noticed that in most of the reported procedures, the sixth axial coordination position of the hemin complex has been unknowingly turned by attaching with water molecules (potential cycling in alkaline conditions or heating), solvents such as ethanol and dimethyl sulfoxide, and nitrogen-donating compounds that have helped for the heme ET reaction. In this work, a systematic effort has been taken to find out the contribution of hemin and its axial bond coordination with π-π interaction, hydrogen bonding, and hydrophobic binding systems toward the ET reaction. Various graphitic carbons such as graphitized mesoporous carbon (GMC), mesoporous carbon-hydrophilic and hydrophobic units, graphite nanopowder, graphene oxide, single-walled carbon, multiwalled carbon nanotube (MWCNT), and carboxylic acid-functionalized MWCNT (as a source for π-π interaction, hydrogen bonding, and hydrophobic environment) along with the amino functional group of chitosan (Chit; as an axial site coordinating system) have been tested by modifying them as a hemin hybrid on a glassy carbon electrode (GCE). In addition, a gold nanoparticle (Aunano) system was combined with the above matrix as a molecular wiring agent, and its role was examined. A highly stable and well-defined redox peak at an apparent formal potential (Eo') of -320 mV versus Ag/AgCl with the highest surface excess of 120 × 10-10 mol cm-2 was noticed with the GCE/Aunano-GMC@hemin-Chit hybrid system, wherein all interactive features have been utilized. Omitting any of the individual interactions resulted in either decreased (with Aunano) or nil current response. As applications, efficient bio-electrocatalytic reduction and sensing of dissolved oxygen and hydrogen peroxide have been demonstrated.

Using porphyrin–amino acid pairs to model the electrochemistry of heme proteins: experimental and theoretical investigations

Deconstructing the complex electrochemistry of heme proteins into simpler heme–amino acid interactions.

Conjugated systems of porphyrin–carbon nanoallotropes: a review

This review summarizes the synthesis and applications of various porphyrin–carbon nanoallotrope conjugates.

Bioapplications of Electrochemical Sensors and Biosensors

Recent progress in the electrochemical field enabled development of miniaturized sensing devices that can be used in biological settings to obtain fundamental and practical biochemically relevant information on physiology, metabolism, and disease states in living systems. Electrochemical sensors and biosensors have demonstrated potential for rapid, real-time measurements of biologically relevant molecules. This chapter provides an overview of the most recent advances in the development of miniaturized sensors for biological investigations in living systems, with focus on the detection of neurotransmitters and oxidative stress markers. The design of electrochemical (bio)sensors, including their detection mechanism and functionality in biological systems, is described as well as their advantages and limitations. Application of these sensors to studies in live cells, embryonic development, and rodent models is discussed.

Highly stable biomolecule supported by gold nanoparticles/graphene nanocomposite as a sensing platform for H2O2 biosensor application

Highly stable biomolecule supported by AuNPs assisted with graphene nanocomposite as a sensing platform for H₂O₂ biosensor application.

Reduced graphene oxide-Hemin-Au nanohybrids: Facile one-pot synthesis and enhanced electrocatalytic activity towards the reduction of hydrogen peroxide

A facile and effective strategy is demonstrated for the synthesis of ternary reduced graphene oxide-Hemin-Au (rGO-H-Au) nanohybrids. The nanohybrids were synthesized through a one-pot in situ reduction of GO and HAuCl4 under alkaline conditions using GO, Hemin and HAuCl4 as the starting materials. The synthesis process can be finished within 1h in a solution phase, without adding any additional surfactant, stabilizing agent and toxic or harsh chemical reducing agents. The resulting nanohybrids were characterized by UV-vis spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM), and so on. Electrochemical measurements showed that the rGO-H-Au nanohybrids exhibited good electrocatalytic activity for the reduction of hydrogen peroxide (H2O2). Based on this property, a simple and highly sensitive amperometric biosensor for H2O2 had been developed. The linear relationships were obtained from 0.1 µM to 40 µM and the detection limit was estimated to be 30 nM. The simple and sensitive sensing platform showed great promising applications in the pharmaceutical, clinical and industrial detection of H2O2.

Biomimetic versus enzymatic high-potential electrocatalytic reduction of hydrogen peroxide on a functionalized carbon nanotube electrode

We report the non-covalent functionalization of a multi-walled carbon nanotube (MWCNT) electrode with a biomimetic model of the horseradish peroxidase (HRP) active site.

We report the non-covalent functionalization of a multi-walled carbon nanotube (MWCNT) electrode with a biomimetic model of the horseradish peroxidase (HRP) active site. By modifying the MWCNT electrode surface with imidazole-modified polypyrrole, a new biomimetic complex of HRP was synthesized on the MWCNT sidewalls via the coordination of imidazole (Im) to the metal centre of iron protoporphyrin IX, affording (Im)(PP)Fe^III. Compared to the pi-stacking of non-coordinated (PP)Fe^III on a MWCNT electrode, the (Im)(PP)Fe^III-modified MWCNT electrode exhibits higher electrocatalytic activity with an I_max = 0.52 mA cm^–2 for the reduction of H₂O₂, accompanied by a high onset potential of 0.43 V vs. Ag/AgCl. The performances of these novel surface-confined HRP mimics were compared to those of a MWCNT electrode modified by HRP. Although the enzyme electrode displays a higher electrocatalytic activity towards H₂O₂ reduction, the (Im)(PP)Fe^III-modified MWCNT electrode exhibits a markedly higher operational stability, retaining 63% of its initial activity after one month.

Porphyrin-based graphene oxide frameworks with ultra-large d-spacings for the electrocatalyzation of oxygen reduction reaction

Graphene oxide frameworks with ultralarge d-spacings of up to 26 Å were synthesized by using porphyrins as molecular pillars of graphene sheets, showing potential applications as electrocatalysts for oxygen reduction reaction.

Solution-processed PEDOT:PSS/graphene composites as the electrocatalyst for oxygen reduction reaction

Composites of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and reduced graphene oxide (rGO) have been prepared by solution mixing and applied as electrocatalysts for oxygen reduction reaction (ORR) after treatment with concentrated H2SO4. The blending of rGO induces the conformational change of PEDOT chains from benzoid to quionoid structure and charge transfer from rGO to PEDOT. H2SO4 post-treatment can remove part of insulating PSS from the surface of the PEDOT:PSS/rGO composite film, resulting in a significant conductivity enhancement of the composite. This synergistic effect makes the H2SO4-treated PEDOT:PSS/rGO composite a promising catalyst for ORR. It exhibits enhanced electrocatalytic activity, better tolerance to a methanol crossover effect and CO poisoning, and longer durability than those of the platinum/carbon catalyst.

Combination of hematin and PEDOT via 1-pyrenebutanoic acid: a new platform for direct electrochemistry of hematin and biosensing applications

In this work, we prepare a novel platform based on poly(3,4-ethylenedioxythiophene) (PEDOT) and 1-pyrenebutanoic acid (PBA). PEDOT is a conductive material of heteroatom doping, which can connect with PBA through π–π stacking.

Microwave-assisted synthesis of hemin–graphene/poly(3,4-ethylenedioxythiophene) nanocomposite for a biomimetic hydrogen peroxide biosensor

The ternary nanocomposite hemin–graphene sheets/poly(3,4-ethylenedioxythiophene) (H–GNs/PEDOT) synthesized by a microwave-assisted method exhibits good electrocatalytic activity towards the reduction of hydrogen peroxide.

Manganese porphyrin-dsDNA complex: a mimicking enzyme for highly efficient bioanalysis

Manganese porphyrin (MnTMPyP)-dsDNA complex was reported as an excellent mimicking enzyme of peroxidase. It possessed high catalytic activity and much quicker catalytic kinetics and better stability with exposure to light irradiation and high temperature than both horseradish peroxidase and hemin/G-quadruplex DNAzyme. The groove binding of MnTMPyP to the dsDNA scaffold efficiently maintained the catalytic activity of the MnTMPyP center and improved its stability. By combining with an isothermal hybridization chain reaction (HCR) and in situ formation of MnTMPyP-dsDNA, a highly efficient chemiluminescent (CL) immunosensing method was proposed. After a sandwich immunoreaction, a biotinylated DNA strand, which was bound to biotinylated signal antibody by streptavidin, triggered the HCR and growth of MnTMPyP-dsDNA on the immunocomplex. The in situ, HCR-assisted enzyme formation brought numerous enzymatic catalytic centers, MnTMPyP, on the immunocomplex, resulting in significant CL signal amplification and highly sensitive CL detection. Using carcinoembryonic antigen as the model target, the proposed CL immunoassay method showed a wide linear range from 10 pg/mL to 100 ng/mL with a detection limit of 6.8 pg/mL. The new MnTMPyP-dsDNA complex could be conveniently synthesized, functionalized, and combined with DNA amplification strategies, showing a promising potential in bioanalysis and other relative fields.

A reduced graphene oxide based electrochemical biosensor for tyrosine detection

In this paper, a 'green' and safe hydrothermal method has been used to reduce graphene oxide and produce hemin modified graphene nanosheet (HGN) based electrochemical biosensors for the determination of l-tyrosine levels. The as-fabricated HGN biosensors were characterized by UV-visible absorption spectra, fluorescence spectra, Fourier transform infrared spectroscopy (FTIR) spectra and thermogravimetric analysis (TGA). The experimental results indicated that hemin was successfully immobilized on the reduced graphene oxide nanosheet (rGO) through π-π interaction. TEM images and EDX results further confirmed the attachment of hemin on the rGO nanosheet. Cyclic voltammetry tests were carried out for the bare glass carbon electrode (GCE), the rGO electrode (rGO/GCE), and the hemin-rGO electrode (HGN/GCE). The HGN/GCE based biosensor exhibits a tyrosine detection linear range from 5 × 10(-7) M to 2 × 10(-5) M with a detection limitation of 7.5 × 10(-8) M at a signal-to-noise ratio of 3. The sensitivity of this biosensor is 133 times higher than that of the bare GCE. In comparison with other works, electroactive biosensors are easily fabricated, easily controlled and cost-effective. Moreover, the hemin-rGO based biosensors demonstrate higher stability, a broader detection linear range and better detection sensitivity. Study of the oxidation scheme reveals that the rGO enhances the electron transfer between the electrode and the hemin, and the existence of hemin groups effectively electrocatalyzes the oxidation of tyrosine. This study contributes to a widespread clinical application of nanomaterial based biosensor devices with a broader detection linear range, improved stability, enhanced sensitivity and reduced costs.

Graphene-supported hemin as a highly active biomimetic oxidation catalyst

Well supported: stable hemin-graphene conjugates formed by immobilization of monomeric hemin on graphene, showed excellent catalytic activity, more than 10 times better than that of the recently developed hemin-hydrogel system and 100 times better than that of unsupported hemin. The catalysts also showed excellent binding affinities and catalytic efficiencies approaching that of natural enzymes.