SEIRAS studies of water structure at the gold electrode surface in the presence of supported lipid bilayer

Stimuli-Responsive Oligourea Molecular Films

We have designed and synthesized a helical cysteamine-terminated oligourea foldamer composed of ten urea residues featuring side carboxyl and amine groups. The carboxyl group is located in proximity to the C-terminus of the oligourea and hence at the negative pole of the helix dipole. The amine group is located close to the N-terminus and hence at the positive pole of the helix dipole. Beyond the already remarkable dipole moment inherent in oligourea 2.5 helices, the incorporation of additional charges originating from the carboxylic and amine groups is supposed to impact the overall charge distribution along the molecule. These molecules were self-assembled into monolayers on a gold substrate, allowing us to investigate the influence of an electric field on these polar helices. By applying surface-enhanced infrared reflection-absorption spectroscopy, we proved that molecules within the monolayers tend to reorient themselves more vertically when a negative bias is applied to the surface. It was also found that surface-confined oligourea molecules affected by the external electric field tend to rearrange the electron density at urea groups, leading to the stabilization of the resonance structure with charge transfer character. The presence of the external electric field also affected the nanomechanical properties of the oligourea films, suggesting that molecules also tend to reorient in the ambient environment without an electrolyte solution. Under the same conditions, the helical oligourea displayed a robust piezoresponse, particularly noteworthy given the slender thickness of the monolayer, which measured approximately 1.2 nm. This observation demonstrates that thin molecular films composed of oligoureas may exhibit stimulus-responsive properties. This, in turn, may be used in nanotechnology systems as actuators or functional films, enabling precise control of their thickness in the range of even fractions of nanometers.

Lipid Landscapes: Vibrational Spectroscopy for Decoding Membrane Complexity

Cell membranes are incredibly complex environments containing hundreds of components. Despite substantial advances in the past decade, fundamental questions related to lipid-lipid interactions and heterogeneity persist. This review explores the complexity of lipid membranes, showcasing recent advances in vibrational spectroscopy to characterize the structure, dynamics, and interactions at the membrane interface. We include an overview of modern techniques such as surface-enhanced infrared spectroscopy as a steady-state technique with single-bilayer sensitivity, two-dimensional sum-frequency generation spectroscopy, and two-dimensional infrared spectroscopy to measure time-evolving structures and dynamics with femtosecond time resolution. Furthermore, we discuss the potential of multiscale molecular dynamics (MD) simulations, focusing on recently developed simulation algorithms, which have emerged as a powerful approach to interpret complex spectra. We highlight the ongoing challenges in studying heterogeneous environments in multicomponent membranes via current vibrational spectroscopic techniques and MD simulations. Overall, this review provides an up-to-date comprehensive overview of the powerful combination of vibrational spectroscopy and simulations, which has great potential to illuminate lipid-lipid, lipid-protein, and lipid-water interactions in the intricate conformational landscape of cell membranes.

Effects of Interfacial Interactions on Electrocatalytic Activity of Cytochrome c Oxidase in Biomimetic Lipid Membranes on Gold Electrodes

Effects of interfacial interactions on the electrocatalytic activity of protein-tethered bilayer lipid membranes (ptBLMs) containing cytochrome c oxidase (CcO) for the oxygen reduction reaction are studied by using protein film electrochemistry and surface-enhanced infrared absorption (SEIRA) spectroscopy. Mammalian CcO was immobilized on a gold electrode via self-assembled monolayers (SAMs) of mixed alkanethiols. The protein orientation on the electrode is controlled by SAM-CcO interactions and is critical to the cytochrome c (cyt c) binding. The CcO-phospholipid and CcO-cyt c interactions modulate the electrocatalytic activity of CcO, and more densely packed ptBLMs show higher electrocatalytic activity. Our study indicates that spectroscopic and electrochemical studies of ptBLMs can provide insights into the effects of relatively weak protein-protein and protein-lipid interactions on the enzymatic activity of transmembrane enzymes.

Molecular interactions of hesperidin with DMPC/cholesterol bilayers

Since cell membranes are complex systems, the use of model lipid bilayers is quite important for the study of their interactions with bioactive molecules. Mammalian cell membranes require cholesterol (CHOL) for their structure and function. For this reason, the mixtures of phospholipid and cholesterol are necessary to use in model membrane studies to better simulate the real systems. In the present study, we investigated the effect of the incorporation of hesperidin in model membranes consisting of dimyristoylphosphatidylcholine (DMPC) and CHOL by using differential scanning calorimetry (DSC), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and atomic force microscopy (AFM). ATR-FTIR results demonstrated that hesperidin increases the fluidity of the DMPC/CHOL binary system. DSC findings indicated that the presence of 5 mol% hesperidin induces a broadening of the main phase transition consisting of three overlapping components. AFM experiments showed that hesperidin increases the thickness of DMPC/CHOL lipid bilayer model membranes. In addition to experimental results, molecular docking studies were conducted with hesperidin and human lanosterol synthase (LS), which is an enzyme found in the final step of cholesterol synthesis, to characterize hesperidin's interactions with its surrounding via its hydroxyl and oxygen groups. Then, hesperidin's ADME/Tox (absorption, distribution, metabolism, excretion and toxicity) profile was computed to see the potential impact on living system. In conclusion, considering the data obtained from experimental studies, this work ensures molecular insights in the interaction between a flavonoid, as an antioxidant drug model, and lipids mimicking those found in mammalian membranes. Moreover, computational studies demonstrated that hesperidin may be a great potential for use as a therapeutic agent for hypercholesterolemia due to its antioxidant property.

Effect of Lipid Composition on the Inhibition Mechanism of Amiloride on Alamethicin Ion Channels in Supported Phospholipid Bilayers

The inhibition effect of amiloride on alamethicin ion channels was studied in a model zwitterionic floating bilayer lipid membrane (fBLM). The EIS studies indicated that amiloride prevents the transport of ions through the alamethicin channels leading to an overall increase in membrane resistance. The PM-IRRAS data demonstrated that amiloride has no influence on the secondary structure of alamethicin but restricts the insertion of the peptides into the bilayer and blocks ion transport through preformed alamethicin channels. The effect of amiloride on ion channel formation in the floating bilayer formed by a zwitterionic lipid was compared to those of previous studies involving negatively charged fBLMs and tethered zwitterionic lipid bilayers. The findings from these studies show that the effects of amiloride on ion channel formation strongly depend on the mobility and charge of the membrane lipids.

Surface-Enhanced Infrared Absorption Spectroscopy (SEIRAS) to Probe Interfacial Water in Floating Bilayer Lipid Membranes (fBLMs)

Floating bilayer lipid membranes (fBLMs) immobilized on metallic surfaces provide a convenient model mimicking the cell membranes due to the effective hydration of lipid polar heads in a proximal leaflet and the possibility to generate the potential gradient across the membrane. This chapter describes the protocol for the measurement of interfacial water separating the floating bilayer lipid membrane from the solid support using surface-enhanced infrared absorption spectroscopy (SEIRAS) under electrochemical control.

Influence of lipophilicity of anthracyclines on the interactions with cholesterol in the model cell membranes - Langmuir monolayer and SEIRAS studies

The interactions of anthracyclines with biological membranes strongly depend on the drug lipophilicity, which might also determine the specific affinity to cholesterol molecules. Therefore, in this work we show the studies concerning the effect of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA) on simple models of healthy (DMPC:Chol 7:3) and cancer cells membranes with increased level of cholesterol (DMPC:Chol 3:7) as well as pure cholesterol monolayers prepared at the air-water interface and supported on gold surface. It has been shown that more lipophilic IDA is able to penetrate cholesterol monolayers more effectively than DNR due to the formation of IDA-cholesterol arrangements at the interface, as proved by the thermodynamic analysis of compression-expansion cycles. The increased interactions of IDA were also confirmed by the time measurements of pre-compressed monolayers exposed to drug solutions as well as grazing incidence X-ray diffraction studies demonstrating differences in the 2D organization of cholesterol monolayers. Langmuir studies of mixed DMPC:Chol membranes revealed the reorganization of molecules in the cancer cell models at the air-water interface at higher surface pressures due to the removal of DNR, while increased affinity of IDA towards cholesterol allowed this drug to penetrate the layer more efficiently without its removal. The SEIRAS spectra obtained for supported DMPC:Chol bilayers proved that IDA locates both in the ester group and in the acyl chain region of the bilayer, while DNR does not penetrate the membranes as deeply as IDA. The increased penetration of the mixed phospholipid layers by idarubicin might be attributed to the higher lipophilicity caused by the lack of methoxy group and resulting in a specific affinity towards cholesterol.

Molecular Nature of Structured Water in the Light-Induced Interfacial Capacitance Changes at the Bioelectric Interface

Uncovering the function of structured water in the interfacial capacitance at the molecular level is the basis for the development of the concept and model of the electric double layer; however, the limitation of the available technology makes this task difficult. Herein, using surface-enhanced infrared absorption spectroscopy combined with electrochemistry, we revealed the contribution of the cleavage of loosely bonded tetrahedral water to the enhancement of model membrane capacitance. Upon further combination with ionic perturbation, we found that the interface hydrogen bonding environment in the stern layer was greatly significant for the light-induced cleavage of tetrahedral water and thus the conversion of optical signals into electrical signals. Our work has taken an important step toward gaining experimental insight into the relationship between water structure and capacitance at the bioelectric interface.

Effect of Molecular Structure on Electrochemical Phase Behavior of Phospholipid Bilayers on Au(111)

Lipid bilayers form the basis of biological cell membranes, selective and responsive barriers vital to the function of the cell. The structure and function of the bilayer are controlled by interactions between the constituent molecules and so vary with the composition of the membrane. These interactions also influence how a membrane behaves in the presence of electric fields they frequently experience in nature. In this study, we characterize the electrochemical phase behavior of dipalmitoylphosphatidylcholine (DPPC), a glycerophospholipid prevalent in nature and often used in model systems and healthcare applications. DPPC bilayers were formed on Au(111) electrodes using Langmuir-Blodgett and Langmuir-Schaefer deposition and studied with electrochemical methods, atomic force microscopy (AFM) and in situ polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). The coverage of the substrate determined with AFM is in accord with that estimated from differential capacitance measurements, and the bilayer thickness is slightly higher than for bilayers of the similar but shorter-chained lipid, dimyristoylphosphatidylcholine (DMPC). DPPC bilayers exhibit similar electrochemical response to DMPC bilayers, but the organization of molecules differs, particularly at negative charge densities. Infrared spectra show that DPPC chains tilt as the charge density on the metal is increased in the negative direction, but, unlike in DMPC, the chains then return to their original tilt angle at the most negative potentials. The onset of the increase in the chain tilt angle coincides with a decrease in solvation around the ester carbonyl groups, and the conformation around the acyl chain linkage differs from that in DMPC. We interpret the differences in behavior between bilayers formed from these structurally similar lipids in terms of stronger dispersion forces between DPPC chains and conclude that relatively subtle changes in molecular structure may have a significant impact on a membrane's response to its environment.

Interaction of LL-37 human cathelicidin peptide with a model microbial-like lipid membrane

The only representative of cathelicidin peptides in humans is LL-37, a multifunctional antimicrobial peptide (AMP) that is a part of the innate immune response. Details of the LL-37 direct activity against pathogens are not well understood at the molecular level. Here, we present research on the mechanism of interaction between LL-37 and a model multicomponent bilayer lipid membrane (BLM), mimicking microbial cell membrane. Electrochemical impedance spectroscopy (EIS), high-resolution atomic force microscopy (AFM) imaging, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) were applied to study the peptide influence on a model microbial-like membrane. We show that LL-37 causes changes in the phospholipid molecules conformation and orientation, leading to membrane disintegration, significantly affecting the membrane electrical parameters, such as capacitance and resistance. High-resolution AFM imaging shows topographical and mechanical effects of such disintegration, while PM-IRRAS data indicates that introduction of LL-37 causes changes in the phospholipid acyl chains from all-trans to gauche conformations. Moreover, the presence of LL-37 significantly alters the value of the phospholipid tilt angle. Altogether, our results suggest a "carpet" membrane dissolution followed by a detergent-like membrane disruption mechanism upon LL-37 activity. This research gives a novel insight into the understanding of LL-37 influence on multicomponent model membranes and a promising contribution to the development of LL-37-derived therapeutic agents against drug-resistant bacteria.

Toxicity of selected airborne nitrophenols on eukaryotic cell membrane models

Nitroaromatics belong to the group of toxic components of aerosol particles and atmospheric hydrometeors that enter the atmosphere through biomass burning and fuel combustion. In the present work, we report on the cytotoxic effects of a 2-, 3- and 4-nitrophenol mixture on a model eukaryotic-like cell membrane and compared it with in vitro cellular models BEAS-2B (immortalized bronchial epithelial cells) and A549 (cancerous alveolar epithelial cells). A selected model biomembrane comprised of DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine), DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) was studied. The electrochemical-based method, combined with atomic force microscopy (AFM) and phase-contrast microscopy imaging, allowed to get insights into the mechanism of cellular function disruption caused by airborne nitrophenols. The efficacy of the method is supported by the data obtained from in vitro experiments performed on cell models. The nitrophenol mixture exhibited cytotoxic effects at concentrations above 100 μg mL^-1, as demonstrated by phase-contrast microscopy in real lung cell lines. Electrochemical impedance spectroscopy (EIS) revealed the formation of membrane defects at a nitrophenol concentration of 200 μg mL^-1. AFM imaging confirmed the model membrane disintegration and phospholipids rearrangement in the presence of nitrophenols. These observations indicate that particle-bound nitrophenols induce substantial changes in cell membranes and make them more permeable to aerosol, resulting in major cellular damage in the lungs when inhaled. The study provides initial evidence of cellular membrane damage induced by three important nitrated phenols present in the environment.

Electrochemical Properties of Lipid Membranes Self-Assembled from Bicelles

Supported lipid membranes are widely used platforms which serve as simplified models of cell membranes. Among numerous methods used for preparation of planar lipid films, self-assembly of bicelles appears to be promising strategy. Therefore, in this paper we have examined the mechanism of formation and the electrochemical properties of lipid films deposited onto thioglucose-modified gold electrodes from bicellar mixtures. It was found that adsorption of the bicelles occurs by replacement of interfacial water and it leads to formation of a double bilayer structure on the electrode surface. The resulting lipid assembly contains numerous defects and pinholes which affect the permeability of the membrane for ions and water. Significant improvement in morphology and electrochemical characteristics is achieved upon freeze–thaw treatment of the deposited membrane. The lipid assembly is rearranged to single bilayer configuration with locally occurring patches of the second bilayer, and the number of pinholes is substantially decreased. Electrochemical characterization of the lipid membrane after freeze–thaw treatment demonstrated that its permeability for ions and water is significantly reduced, which was manifested by the relatively high value of the membrane resistance.

Alzheimer's disease-related amyloid β peptide causes structural disordering of lipids and changes the electric properties of a floating bilayer lipid membrane

Neurodegeneration in Alzheimer's disease is associated with disruption of the neuronal cell membrane by the amyloid β (Aβ) peptide. However, the disruption mechanism and the resulting changes in membrane properties remain to be elucidated. To address this issue, herein the interaction of amyloid β monomers (AβMs) and amyloid β oligomers (AβOs) with a floating bilayer lipid membrane (fBLM) was studied using electrochemical and IR spectroscopy techniques. IR measurements showed that both Aβ forms interacted similarly with the hydrophobic membrane core (lipid acyl chains), causing conformational and orientational changes of the lipid acyl chains, thus decreasing acyl chain mobility and altering the lipid packing unit cell. In the presence of AβOs, these changes were more significant than those in the presence of AβMs. However, respective interactions of AβMs and AβOs with the membrane hydrophilic exterior (lipid heads) were quite different. AβMs dehydrated lipid heads without affecting their orientation while AβOs changed the orientation of lipid heads keeping their hydration level intact. Electrochemical measurements showed that only AβOs porated the fBLM, thus significantly changing the fBLM electrical properties. The present results provide new molecular-level insight into the mechanism of membrane destruction by AβOs and changes in the membrane properties.

Characterizing the Physical Properties and Cell Compatibility of Phytoglycogen Extracted from Different Sweet Corn Varieties

Owing to its unique structure and properties, the glucose dendrimer phytoglycogen is gaining interest for medical and biotechnology applications. Although many maize variants are available from commercial and academic breeding programs, most applications rely on phytoglycogen extracted from the common maize variant, sugary1. Here we characterized the solubility, hydrodynamic diameter, water-binding properties, protein contaminant concentration, and cytotoxicity of phytoglycogens from different maize sources, A632su1, A619su1, Wesu7, and Ia453su1, harboring various sugary1 mutants. A619su1-SW phytoglycogen was cytotoxic while A632su1-SW phytoglycogen was not. A632su1-Pu phytoglycogen promoted cell growth, whereas extracts from A632su1-NE, A632su1-NC, and A632su1-CM were cytotoxic. Phytoglycogen extracted from Wesu7su1-NE using ethanol precipitation was cytotoxic. Acid-treatment improved Wesu7 phytoglycogen cytocompatibility. Protease-treated Wesu7 extracts promoted cell growth. Phytoglycogen extracted from Ia453su1 21 days after pollination (“Ia435su1 21DAP”) was cytotoxic, whereas phytoglycogen extracted at 40 days (“Ia435su1 40DAP”) was not. In general, size and solubility had no correlation with cytocompatibility, whereas protein contaminant concentration and water-binding properties did. A632su1-CM had the highest protein contamination among A632 mutants, consistent with its higher cytotoxicity. Likewise, Ia435su1 21DAP phytoglycogen had higher protein contamination than Ia435su1 40DAP. Conversely, protease-treated Wesu7 extracts had lower protein contamination than the other Wesu7 extracts. A632su1-NE, A632su1-NC, and A632su1-CM had similar water-binding properties which differed from those of A632su1-Pu and A632su1-SW. Likewise, water binding differed between Ia435su1 21DAP and Ia435su1 40DAP. Collectively, these data demonstrate that maize phytoglycogen extracts are not uniformly cytocompatible. Rather, maize variant, plant genotype, protein contaminants, and water-binding properties are determinants of phytoglycogen cytotoxicity.

Water Structure in the Submembrane Region of a Floating Lipid Bilayer: The Effect of an Ion Channel Formation and the Channel Blocker

The structure of water in the submembrane region of the bilayer of DPhPC floating (fBLM) on a monolayer of 1-thio-β-d-glucose (β-Tg)-modified gold nanoparticle film was studied by the surface-enhanced infrared absorption spectroscopy (SEIRAS). SEIRAS employs surface enhancement of the mean square electric field of the photon, which is acting on a few molecular layers above the film of gold nanoparticles. Therefore, it is uniquely suited to probe water molecules in the submembrane region and provides unique information concerning the structure of the hydrogen bond network of water surrounding the lipid bilayer. The IR spectra indicated that water with a strong hydrogen network is separating the membrane from the gold surface. This water is more ordered than the water in the bulk. When alamethicin, a peptide forming ion channels, is inserted into the membrane, the network is only slightly loosened. The addition of amiloride, an ion channel blocker, results in a significant decrease in the amount of water in the submembrane region. The remaining water has a significantly distorted hydrogen bond network. This study provides unique information about the effect of the ion channel on water transport across the bilayer. The electrode potential has a relatively small effect on water structure in the submembrane region. However, the IR studies demonstrated that water is less ordered at positive transmembrane potentials. The present results provide significant insight into the nature of hydration of a floating lipid bilayer on the gold electrode surface.

Effect of Interfacial Water on the Nanomechanical Properties of Negatively Charged Floating Bilayers Supported on Gold Electrodes

Floating lipid bilayers composed of phosphatidylglycerols and cardiolipin were deposited on gold electrodes premodified with 1-thio-β-d-glucose monolayer by spreading of small unilamellar vesicles. The resulting lipid membrane was homogeneous, and its thickness was ∼5.0 nm. Electrochemical characterization combined with surface-enhanced infrared absorption spectroscopy revealed that negative polarization of the electrode leads to accumulation of water molecules in the interfacial region between lipid membrane and the thioglucose film. Moreover, the buildup of water layer was demonstrated to affect the nanomechanical properties of the membrane. The latter was manifested by well-pronounced decrease of Young's modulus of the lipid bilayer correlating with increasing hydration. This effect was ascribed to the decoupling of the membrane from supporting thioglucose film due to the accumulation of interfacial water. As a result, the effective stiffness of the supporting layer is lower and it alters the nanomechanical behavior of lipid membrane. Our results provide strong experimental proof for the correlation between elastic properties of floating lipid membrane and the amount of water accumulated in the submembrane region.

In Situ Electrochemical and PM-IRRAS Studies of Colicin E1 Ion Channels in the Floating Bilayer Lipid Membrane

Colicin E1 is a channel-forming bacteriocin produced by certain Escherichia coli cells in an effort to reduce competition from other bacterial strains. The colicin E1 channel domain was incorporated into a 1,2-diphytanoyl- sn-glycero-3-phosphocholine floating bilayer situated on a 1-thio-?-d-glucose-modified gold (111) surface. The electrochemical properties of the colicin E1 channel in the floating bilayer were measured by electrochemical impedance spectroscopy; the configuration and orientation of colicin E1 in the bilayer were determined by polarization-modulation-infrared-reflection absorption spectroscopy. The EIS and IR results indicate that colicin E1 adopts a closed-channel state at the positive transmembrane potential, leading to high membrane resistance and a large tilt angle of ?-helices. When the transmembrane potential becomes negative, colicin E1 begins to insert into the lipid bilayer, corresponding to low membrane resistance and a low tilt angle of ?-helices. The insertion of colicin E1 into the lipid bilayer is driven by the negative transmembrane potential, and the ion-channel open and closed states are potential reversible. The data in this report provide new insights into the voltage-gated mechanism of colicin E1 ion channels in phospholipid bilayers and illustrate that the floating bilayer lipid membrane at the metal electrode surface is a robust platform to study membrane-active proteins and peptides in a quasi-natural environment.

Effects of Amiloride, an Ion Channel Blocker, on Alamethicin Pore Formation in Negatively Charged, Gold-Supported, Phospholipid Bilayers: A Molecular View

The effects of amiloride on the structure and conductivity of alamethicin ion pore formation within negatively charged, gold-supported, 1,2-dimyristoyl- sn-glycero-3-phosphocholine/Egg-PG membranes were investigated with the help of electrochemical impedance spectroscopy (EIS), photon polarization modulation-infrared reflection spectroscopy (PM-IRRAS), and atomic force microscopy (AFM). The EIS results indicate that ion conductivity across negatively charged phospholipid bilayers containing alamethicin decreases by an order of magnitude when amiloride is introduced to the system. Despite the reduction in ion conductivity, the PM-IRRAS data shows that amiloride does not inhibit ion channel formation by alamethicin peptides. High-resolution AFM images revealed that amiloride enlarges and distorts the shape of alamethicin ion pores when introduced to the system, indicating that it is inserting itself into the mouth of the alamethicin pores. This effect is driven by electrostatic interactions between positively charged amiloride molecules and the negative charge on the membrane.

Water as a Universal Infrared Probe for Bioanalysis in Aqueous Solution by Attenuated Total Reflection-Surface Enhanced Infrared Absorption Spectroscopy

Monitoring the properties and reactions of biomolecules at their interface has attracted ever-growing interest. Here, we propose an approach of infrared analysis technique that utilizes water molecule as a universal probe for in situ and label free monitoring of interfacial bioevents in aqueous solution with high sensitivity. The strong infrared (IR) signal of O-H stretching vibrations from the repelled water is used to sensitively reveal the kinetics of interfacial bioevents at molecular level based on the steric displacement of water using an attenuated total reflection-surface enhanced infrared absorption spectroscopy. Using interfacial immuno-recognition and DNA hybridization as demonstrations, water IR probe offers 26 and 34 times higher sensitivity and even 200 and 86 times lower detection limit for immunosensing and DNA sensing, respectively, as compared to the traditional IR molecular fingerprints.

Role of Transmembrane Potential and Defects on the Permeabilization of Lipid Bilayers by Alamethicin, an Ion-Channel-Forming Peptide

The insertion and ion-conducting channel properties of alamethicin reconstituted into a 1,2-di- O-phytanyl- sn-glycero-3-phosphocholine bilayer floating on the surface of a gold (111) electrode modified with a 1-thio-β-d-glucose (β-Tg) self-assembled monolayer were investigated using a combination of electrochemical impedance spectroscopy (EIS) and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). The hydrophilic β-Tg monolayer separated the bilayer from the gold substrate and created a water-rich spacer region, which better represents natural cell membranes. The EIS measurements acquired information about the membrane resistivity (a measure of membrane porosity), and the PM-IRRAS experiments provided insight into the conformation and orientation of the membrane constituents as a function of the transmembrane potential. The results showed that the presence of alamethicin had a small effect on the conformation and orientation of phospholipid molecules within the bilayer for all studied potentials. In contrast, the alamethicin peptides assumed a surface state, where the helical axes adopted a large tilt angle with respect to the surface normal, at small transmembrane potentials, and inserted into the bilayer at sufficiently negative transmembrane potentials forming pores, which behaved as barrel-stave ion channels for ionic transport across the membrane. The results indicated that insertion of alamethincin peptides into the bilayer was driven by the dipole-field interactions and that the transitions between the inserted and surface states were electrochemically reversible. Additionally, the EIS measurements performed on phospholipid bilayers without alamethicin also showed that the application of negative transmembrane potentials introduces defects into the bilayer. The membrane resistances measured in both the absence and presence of alamethicin show similar dependencies on the electrode potential, suggesting that the insertion of the peptide may also be assisted by the electroporation of the membrane. The findings in this study provide new insights into the mechanism of alamethicin insertion into phospholipid bilayers.

Beyond Simple Cartoons: Challenges in Characterizing Electrochemical Biosensor Interfaces

Design and development of surface-based biosensors is challenging given the multidisciplinary nature of this enterprise, which is certainly the case for electrochemical biosensors. Self-assembly approaches are used to modify the surface with capture probes along with electrochemical methods for detection. Complex surface structures are created to improve the probe-target interaction. These multicomponent surface structures are usually idealized in schematic representations. Many rely on the analytical performance of the sensor surface as an indication of the quality of the surface modification strategy. While directly linked to the eventual device, arguments for pursuing a more extensive characterization of the molecular environments at the surface are presented as a path to understanding how to make electrochemical sensors that are more robust, reliable with improved sensitivity. This is a complex task that is most often accomplished using methods that only report the average characteristics of the surface. Less often applied are methods that are sensitive to the probe (or adsorbate) present in nonideal configurations (e.g., aggregates, clusters, nonspecifically adsorbed). Though these structures may compose a small fraction of the overall modified surface, they have an uncertain impact on sensor performance and reliability. Addressing this issue requires application of imaging methods over a variety of length scales (e.g., optical microscopy and/or scanning probe microscopy) that provide valuable insight into the diversity of surface structures and molecular environments present at the sensing interface. Furthermore, using in situ analytical methods, while complex, can be more relevant to the sensing environment. Reliable measurements of the nature and extent of these features are required to assess the impact of these nonideal configurations on the sensing process. The development and use of methods that can characterize complex surface based biosensors is arguably required, highlighting the need for a multidisciplinary approach toward the preparation and analysis of the biosensor surface. In many ways, representing the surface without reliance on overly simplified cartoons will highlight these important considerations for improving sensor characteristics.

The Role of Water Distribution Controlled by Transmembrane Potentials in the Cytochrome c-Cardiolipin Interaction: Revealing from Surface-Enhanced Infrared Absorption Spectroscopy

The interaction of cytochrome c (cyt c) with cardiolipin (CL) plays a crucial role in apoptotic functions, however, the changes of the transmembrane potential in governing the protein behavior at the membrane-water interface have not been studied due to the difficulties in simultaneously monitoring the interaction and regulating the electric field. Herein, surface-enhanced infrared absorption (SEIRA) spectroelectrochemistry is employed to study the mechanism of how the transmembrane potentials control the interaction of cyt c with CL membranes by regulating the electrode potentials of an Au film. When the transmembrane potential decreases, the water content at the interface of the membranes can be increased to slow down protein adsorption through decreasing the hydrogen-bond and hydrophobic interactions, but regulates the redox behavior of CL-bound cyt c through a possible water-facilitated proton-coupled electron transfer process. Our results suggest that the potential drop-induced restructure of the CL conformation and the hydration state could modify the structure and function of CL-bound cyt c on the lipid membrane.

Equilibrium Swelling, Interstitial Forces, and Water Structuring in Phytoglycogen Nanoparticle Films

Phytoglycogen is a highly branched polymer of glucose that forms dendrimeric nanoparticles. This special structure leads to a strong interaction with water that produces exceptional properties such as high water retention, low viscosity, and high stability of aqueous dispersions. We have used ellipsometry at controlled relative humidity (RH) to measure the equilibrium swelling of ultrathin films of phytoglycogen, which directly probes the interstitial forces acting within the films. Comparison of the swelling behavior of films of highly branched phytoglycogen to that of other glucose-based polysaccharides shows that the chain architecture plays an important role in determining both the strong, short-range repulsion of the chains at low RH and the repulsive hydration forces at high RH. In particular, the length scale λ₀ that characterizes the exponentially decaying hydration forces provides a quantitative, RH-independent measure of film swelling that differs significantly for different glucose-based polysaccharides. By combining ellipsometry with infrared spectroscopy, we have determined the relationship between water structuring and inter-chain separation in the highly branched phytoglycogen nanoparticles, with maintenance of a high degree of water structure as the film swells significantly at high RH. These insights into the structure-hydration relationship for phytoglycogen are essential to the development of new products and technologies based on this sustainable nanomaterial.

Physicochemical Studies on Orientation and Conformation of a New Bacteriocin BacSp222 in a Planar Phospholipid Bilayer

The behavior, secondary structure, and orientation of a recently discovered bacteriocin-like peptide BacSp222 in a lipid model system supported at a gold electrode was investigated by chronocoulometry, polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), and attenuated total reflectance infrared (ATR-IR) spectroscopy. The IR spectra show that the secondary structure of BacSp222 is predominantly α-helical. Analysis of the spectra in the amide I region shows that the α-helical fragment of the peptide is inserted into bilayer at the potential range at which the bilayer is stable and attached to the Au(111) surface, i.e., from -0.5 to 0.3 V vs Ag/AgCl. Insertion of BacSp222 to the membrane significantly changes the conformation of the acyl chains of lipid molecules, from all-trans to partially melted; however, the chains become less tilted. Based on these results, we propose that BacSp222 interacts with the DMPC bilayer through the barrel-stave pore formation. In this model, α-helix of BacSp222 inserts into the membrane with an angle between the α-helix axis and membrane normal equal to ∼18°. The changes in orientation of the α-helical fragment of the peptide indicate that the orientation of BacSp222 with respect to the bilayer surface is potential-dependent. The peptide is inserted into the membrane driven by the electrostatic field generated by negative charge at the metal surface. It is not inserted at negative potentials where the membrane is detached from the metal and no longer exposed to the electrostatic field of the metal.

Surface-Enhanced Infrared Spectroscopy and Neutron Reflectivity Studies of Ubiquinone in Hybrid Bilayer Membranes under Potential Control

Surface-enhanced infrared adsorption spectroscopy (SEIRAS) and neutron reflectometry (NR) were employed to characterize ubiquinone (UQ) containing hybrid bilayer membranes. The biomimetic membrane was prepared by fusing phospholipid vesicles on a hydrophobic octadecanethiol monolayer self-assembled on a thin gold film. Using SEIRAS, the assembly of the membrane is monitored in situ. The presence of ubiquinone is verified by the characteristic carbonyl peaks from the quinone ester. A well-ordered distal lipid leaflet results from fusion of vesicles with and without the addition of ubiquinone. With applied potential, the hybrid bilayer membrane in the absence of UQ behaves in the same way as previously reported solid supported phospholipid membranes. When ubiquinone is incorporated in the membrane, electric field induced changes in the distal leaflet are suppressed. Changes in the infrared vibrations of the ubiquinone due to applied potential indicate the head groups are located in both polar and nonpolar environments. The spectroscopic data reveal that the isoprenoid unit of the ubiquinone is likely lying in the midplane of the lipid bilayer while the head has some freedom to move within the hydrophobic core. The SEIRAS experiments show redox behavior of UQ incorporated in a model lipid membrane that are otherwise inaccessible with traditional electrochemistry techniques.

Potential Controls the Interaction of Liposomes with Octadecanol-Modified Au Electrodes: An in Situ AFM Study

The formation of supported lipid bilayers using liposomes requires interaction with the solid surface, rupture of the liposome, and spreading to cover the surface with a lipid bilayer. This can result in a less-than-uniform coating of the solid surface. Presented is a method that uses the electrochemical poration of an adsorbed lipid-like layer on a Au electrode to control the interaction of 100 nm DOPC liposomes. An octadecanol-coated Au-on-mica surface was imaged using tapping-mode AFM during the application of potential in the presence or absence of liposomes. When the substrate potential was made negative enough, defects formed in the adsorbed layer and new taller features were observed. More features were observed and existing features increased in size with time spent at this negative poration potential. The new features were 1.8-2.0 nm higher than the octadecanol-coated gold surface, half the thickness of a DOPC bilayer. These features were not observed in the absence of liposomes when undergoing the same potential perturbation. In the presence of liposomes, the application of a poration potential was needed to initiate the formation of these taller features. Once the applied potential was removed, the features stopped growing and no new regions were observed. The size of these new regions was consistent with the footprint of a flattened 100 nm liposome. It is speculated that the DOPC liposomes were able to interact with the defects and became soluble in the octadecanol, creating a taller region that was limited in size to the liposome that adsorbed and became incorporated. This AFM study confirms previous in situ fluorescence measurements of the same system and illustrates the use of a potential perturbation to control the formation of these regions of increased DOPC content.

Photosynthetic Proteins in Supported Lipid Bilayers: Towards a Biokleptic Approach for Energy Capture

In nature, plants and some bacteria have evolved an ability to convert solar energy into chemical energy usable by the organism. This process involves several proteins and the creation of a chemical gradient across the cell membrane. To transfer this process to a laboratory environment, several conditions have to be met: i) proteins need to be reconstituted into a lipid membrane, ii) the proteins need to be correctly oriented and functional and, finally, iii) the lipid membrane should be capable of maintaining chemical and electrical gradients. Investigating the processes of photosynthesis and energy generation in vivo is a difficult task due to the complexity of the membrane and its associated proteins. Solid, supported lipid bilayers provide a good model system for the systematic investigation of the different components involved in the photosynthetic pathway. In this review, the progress made to date in the development of supported lipid bilayer systems suitable for the investigation of membrane proteins is described; in particular, there is a focus on those used for the reconstitution of proteins involved in light capture.

SEIRAS Studies of Water Structure in a Sodium Dodecyl Sulfate Film Adsorbed at a Gold Electrode Surface

Surface-enhanced infrared reflection-absorption spectroscopy (SEIRAS) was used to investigate the structure of water that is incorporated within a film of sodium dodecyl sulfate (SDS) adsorbed at a thin gold nanoparticle film deposited onto a silicon substrate. Previous studies on a Au(111) electrode surface showed that SDS molecules form long-range ordered hemicylindrical hemimicelles (phase I) for potentials -0.2 ≤ E ≤ 0.45 V vs Ag/AgCl and a disordered bilayer (phase II) for potentials E ≥ 0.5 V vs Ag/AgCl. The SEIRA spectra demonstrated that the hemimicellar film is water-rich and contains both a network of hydrogen-bonded water and a disturbed network of hydrogen bonds consisting of monomeric and dimeric water in the hydrophobic region of the film. No network water was observed in phase II of the film. However, SEIRAS data showed that sulfate groups in the disordered bilayer are hydrated. The SEIRAS spectra of the film of SDS were compared to the previously measured spectra obtained using subtractively normalized interfacial Fourier transform IR spectroscopy (SNIFTIRS). The complementarity of the spectroscopic information obtained by these two techniques was demonstrated.

Biomimetic environment to study E. coli complex I through surface-enhanced IR absorption spectroscopy

In this study complex I was immobilized in a biomimetic environment on a gold layer deposited on an ATR-crystal in order to functionally probe the enzyme against substrates and inhibitors via surface-enhanced IR absorption spectroscopy (SEIRAS) and cyclic voltammetry (CV). To achieve this immobilization, two methods based on the generation of a high affinity self-assembled monolayer (SAM) were probed. The first made use of the affinity of Ni-NTA toward a hexahistidine tag that was genetically engineered onto complex I and the second exploited the affinity of the enzyme toward its natural substrate NADH. Experiments were also performed with complex I reconstituted in lipids. Both approaches have been found to be successful, and electrochemically induced IR difference spectra of complex I were obtained.