A novel nickel nanowire amperometric sensor: Direct current vs. alternating current strategies for ethanol, acetaldehyde and acetylcholine detection

Reduced graphene oxide/zinc oxide composite as an electrochemical sensor for acetylcholine detection

Acetylcholine (ACh) plays a pivotal role as a neurotransmitter, influencing nerve cell communication and overall nervous system health. Imbalances in ACh levels are linked to neurodegenerative diseases, such as Alzheimer's and Parkinson's. This study focused on developing electrochemical sensors for ACh detection, utilizing graphene oxide (GO) and a composite of reduced graphene oxide and zinc oxide (rGO/ZnO). The synthesis involved modified Hummers' and hydrothermal methods, unveiling the formation of rGO through deoxygenation and the integration of nano-sized ZnO particles onto rGO, as demonstrated by XPS and TEM. EIS analysis also revealed the enhancement of electron transfer efficiency in rGO/ZnO. Cyclic voltammograms of the electrode, comprising the rGO/ZnO composite in ACh solutions, demonstrated prominent oxidation and reduction reactions. Notably, the composite exhibited promise for ACh detection due to its sensitivity, low detection threshold, reusability, and selectivity against interfering compounds, specifically glutamate and gamma-aminobutyric acid. The unique properties of rGO, such as high specific surface area and electron mobility, coupled with ZnO's stability and catalytic efficiency, contributed to the composite's potential in electrochemical sensor applications. This research, emphasizing the synthesis, fabrication, and characterization of the rGO/ZnO composite, established itself as a reliable platform for detecting the acetylcholine neurotransmitter.

Fabrication of polydopamine decorated carbon cloth as support material to anchor CeO2 nanoparticles for electrochemical detection of ethanol

A flexible CeO₂ nanostructured polydopamine-modified carbon cloth (CeO₂/PDA/CC) interface was fabricated via electrodeposition for ethanol detection. The fabrication method involved two consecutive electrochemical steps in which dopamine was firstly electrodeposited on carbon fibers, followed by the electrochemical growth of CeO₂ nanoparticles. The CeO₂/PDA-based electroactive interface exerts an impressive electrochemical performance on the flexible sensor due to strong synergistic effect of the PDA functionalization with more active sites. Moreover, catalytic activity of CeO₂ nanostructures anchored on highly conductive CC incorporate superior electrocatalytic performance of the fabricated interface. The designed electrochemical sensor showed a wide response to ethanol in the linear range 1 to 25 mM with a detection limit of 0.22 mM. The CeO₂/PDA/CC flexible sensor showed good anti-interference ability and excellent repeatability and reproducibility (RSD = 1.67%). The fabricated interface performed well in saliva samples with satisfactory recoveries, corroborating the viability of CeO₂/PDA/CC integrated interface for practical implementation.

Nanowire-based sensor electronics for chemical and biological applications

Detection and recognition of chemical and biological species via sensor electronics are important not only for various sensing applications but also for fundamental scientific understanding. In the past two decades, sensor devices using one-dimensional (1D) nanowires have emerged as promising and powerful platforms for electrical detection of chemical species and biologically relevant molecules due to their superior sensing performance, long-term stability, and ultra-low power consumption. This paper presents a comprehensive overview of the recent progress and achievements in 1D nanowire synthesis, working principles of nanowire-based sensors, and the applications of nanowire-based sensor electronics in chemical and biological analytes detection and recognition. In addition, some critical issues that hinder the practical applications of 1D nanowire-based sensor electronics, including device reproducibility and selectivity, stability, and power consumption, will be highlighted. Finally, challenges, perspectives, and opportunities for developing advanced and innovative nanowire-based sensor electronics in chemical and biological applications are featured.

Dual-Ionomer-Based Device: Acetylcholine Transport and Nonenzymatic Sensing

The malfunctioning in the release of acetylcholine (ACh⁺), leading to consequential damages in the neural system, has become an impulsion for the development of numerous progressive transport and detection gadgets. However, several challenges, such as laterality and complexity of transport devices, low precision of amperometric detection systems, and sumptuous, multistaged enzymatic quantification methods, have not yet been overcome. Herein, ionomers, because of their selective ion transporting nature, are chosen as suitable candidates for being implemented into both targeted ACh⁺ delivery and sensing systems. Based on these two approaches, for the very first time in the literature, the disulfonated poly(arylene ether sulfone) membrane is concurrently (i) used in the mimicry of transduction of the electrical-to-ionic signal in a neural network as "Acetylcholine Pen" (ACh⁺ Pen) and (ii) operated as a highly sensitive, conductivity-based ACh⁺ quantifier. Our dual device, being able to operate under an actual action potential of 55 mV_bias, shows a strong potential of future applicability in real-time ionic delivery-and-sensing systems.

A Biosensor for the Detection of Acetylcholine and Diazinon

Acetylcholine is a neurotransmitter and a neuromodulator found in the autonomic, peripheral and central nervous systems. Diazinon is a pesticide with toxic effects on humans, such as the inhibition of acetylcholine. In this paper, a biosensor is proposed for the detection of acetylcholine (range 70 - 1000 μM) and diazinon (range 0.3 - 20000 ppb). This biosensor combines a pH-sensitive layer of reduced graphene oxide functionalized with 4-aminobenzoic acid and acetylcholinesterase. This enzyme was immobilized on reduced graphene oxide and it catalyzed the conversion of acetylcholine into choline and acetic acid, locally decreasing the pH value and triggering the sensor response. The limit of detection for the acetylcholine and diazinon were 70 μM and 0.3 ppb, respectively.

Direct Electrochemical Detection of Glutamate, Acetylcholine, Choline, and Adenosine Using Non-Enzymatic Electrodes

Non-electroactive neurotransmitters such as glutamate, acetylcholine, choline, and adenosine play a critical role in proper activity of living organisms, particularly in the nervous system. While enzyme-based sensing of this type of neurotransmitter has been a research interest for years, non-enzymatic approaches are gaining more attention because of their stability and low cost. Accordingly, this focused review aims to give a summary of the state of the art of non-enzymatic electrochemical sensors used for detection of neurotransmitter that lack an electrochemically active component. In place of using enzymes, transition metal materials such as those based on nickel show an acceptable level of catalytic activity for neurotransmitter sensing. They benefit from fast electron transport properties and high surface energy and their catalytic activity can be much improved if their surface is modified with nanomaterials such as carbon nanotubes and platinum nanoparticles. However, a general comparison reveals that the performance of non-enzymatic biosensors is still lower than those that use enzyme-based methods. Nevertheless, their excellent stability demonstrates that non-enzymatic neurotransmitter sensors warrant additional research in order to advance them toward becoming an acceptable replacement for the more expensive enzyme-based sensors.

Quantification of ethanol in plasma by electrochemical detection with an unmodified screen printed carbon electrode

Simple, rapid and accurate detection of ethanol concentration in blood is very crucial in the diagnosis and management of potential acute ethanol intoxication patients. A novel electrochemical detection method was developed for the quantification of ethanol in human plasma with disposable unmodified screen-printed carbon electrode (SPCE) without sample preparation procedure. Ethanol was detected indirectly by the reaction product of ethanol dehydrogenase (ADH) and cofactor nicotinamide adenine dinucleotide (NAD⁺). Method validation indicated good quantitation precisions with intra-day and inter-day relative standard deviations of ≤9.4% and 8.0%, respectively. Ethanol concentration in plasma is linear ranging from 0.10 to 3.20 mg/mL, and the detection limit is 40.0 μg/mL (S/N > 3). The method shows satisfactory correlation with the reference method of headspace gas chromatography in twenty human plasma samples (correlation coefficient 0.9311). The proposed method could be applied to diagnose acute ethanol toxicity or ethanol-related death.