Enhancement effect of transition metal cations on the electrochromic properties of nanostructure tiron doped polypyrrole film

Preparation and Electrochromic Properties of MnO2/PPy Composite Films with Coral-like Structures

MnO2/polypyrrole (PPy) composite films were deposited on fluorine-doped tin oxide (FTO) conductive glasses by a two-step wet-chemical method, including electrochemical deposition and chemical bath deposition (CBD). The porous MnO2 films were first grown on FTO glasses by an electrodeposition method. Second, polypyrrole nanoparticles were polymerized by the oxidation-reduction reaction between MnO2 and pyrrole, using the presynthesized MnO2 as the skeleton. Then, MnO2/PPy composite films with coral-like structures were obtained. The electrochemical and electrochromic (EC) properties of the prepared films were investigated. The results show that, compared to the single MnO2 or PPy film, the MnO2/PPy composite film has a larger optical modulation (67.3% at a wavelength of 900 nm), faster response times (4 s for coloration and 3 s for bleaching), and a higher coloration efficiency (218.16 cm2·C-1). The high coloration efficiency attests to the exceptional performance of the composite film in converting electrical signals into vivid color changes. The electrochemical stability test results show that the composite film maintains a stable EC performance after 200 coloration/bleaching cycles. The coral-like structures of the composite film are responsible for the better EC properties.

Boosting the Self-Recharging of Polypyrrole/Prussian Blue Electrochromic Device by Potential Difference-Driven Alternative Redox

Energy-storage electrochromic (EC) devices are a kind of recently developed device integrating energy-saving and energy-storage functions. To minimize energy consumption, a self-rechargeable energy-storage EC device with fast recovery speed is highly desired. Herein, a polypyrrole (PPy)/Prussian blue (PB) double-layer film with a potential difference is initially constructed and fabricated into a fast-recovery self-rechargeable EC device. Due to the existence of potential difference, the reduced PPy can be oxidized by PB, and subsequently Prussian white (the reduced state of PB) can be oxidized by O2 dissolved in electrolyte. Thus, the self-coloration/self-recharging process can be boosted by an alternative redox occurring in the solid/solid/liquid interfaces of PPy/PB/dissolved O2 instead of common solid/liquid interfaces or solutions. After self-recharging for 1 h, 65.0% of the open-circuit voltage and 45.2% of the total capacity can be recovered. Simultaneously, the synergy effect in this PPy and PB system enables a large optical modulation of 63.3% at 800 nm, a high open-circuit voltage of 1.20 V, and a large initial specific capacity of 87.8 mA·h·g-1 at 1.0 A·g-1. The design of double-layer film with a potential difference for boosting the self-coloration/self-recharging process of EC devices provides a new strategy for next-generation self-powered energy-storage EC devices.

Copolymers Based on 1,3-Bis(carbazol-9-yl)benzene and Three 3,4-Ethylenedioxythiophene Derivatives as Potential Anodically Coloring Copolymers in High-Contrast Electrochromic Devices

In this study, copolymers based on 1,3-bis(carbazol-9-yl)benzene (BCz) and three 3,4-ethylenedioxythiophene derivatives (3,4-ethylenedioxythiophene (EDOT), 3,4-(2,2-dimethylpropylenedioxy)thiophene (ProDOT-Me₂), and 3,4-ethylenedithiathiophene (EDTT)) were electrochemically synthesized and their electrochemical and electrochromic properties were characterized. The anodic copolymer P(BCz-co-ProDOT) with BCz/ProDOT-Me₂ = 1/1 feed molar ratio showed high optical contrast (ΔT%) and coloring efficiency (η), measured as 52.5% and 153.5 cm²∙C^-1 at 748 nm, respectively. Electrochromic devices (ECDs) based on P(BCz-co-EDOT), P(BCz-co-ProDOT), and P(BCz-co-EDTT) as anodic polymer layers, and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as cathodic polymer layer were fabricated. P(BCz-co-ProDOT)/triple-layer PEDOT-PSS ECD showed three different colors (light yellow, yellowish-blue, and dark blue) at different applied potentials. In addition, the highest optical contrast (ΔT%) of P(BCz-co-ProDOT)/triple-layer PEDOT-PSS ECD was found to be 41% at 642 nm and the coloration efficiency was calculated to be 416.5 cm²∙C^-1 at 642 nm. All ECDs showed satisfactory optical memories and electrochemical cyclic stability.