Electrocatalytic oxidation of NADH at low overpotential using nanoporous poly(3,4)-ethylenedioxythiophene modified glassy carbon electrode

Fouling-resistant electrode for electrochemical sensing based on covalent-organic frameworks TpPA-1 dispersed cabon nanotubes

The key problem that limits the practical applications of nonenzymatic electrochemical sensors in biological media, is the biofouling and chemical fouling of electrodes due to the adsorption of biological molecules and oxidation (reduction) products. Electrode fouling will cause low accuracy, poor stability, and low sensitivity. Here, a simple and efficient antifouling electrode was demonstrated for electrochemical sensing based on covalent-organic framework (COF) TpPA-1 and carboxylic multi-walled carbon nanotubes (CNT) composites. COF TpPA-1 possesses abundant hydrophilic groups, which assisted the dispersion of CNT in water and formed uniform composites by π-π interaction. In addition, the introduction of CNT into the composites improved the electron transfer rate of COF TpPA-1. The antifouling interface was characterized by electrochemistry, contact angle measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The electrode showed good chemical and bio-fouling resistant performance for the electrochemical detection of β-nicotinamide adenine dinucleotide (NADH) and uric acid (UA) in real serum samples.

Integration of Glutamate Dehydrogenase and Nanoporous Gold for Electrochemical Detection of Glutamate

Glutamate, a non-essential amino acid produced by fermentation, plays a significant role in disease diagnosis and food safety. It is important to enable the real-time monitoring of glutamate concentration for human health and nutrition. Due to the challenges in directly performing electrochemical oxidation-reduction reactions of glutamate, this study leverages the synergistic effect of glutamate dehydrogenase (GLDH) and nanoporous gold (NPG) to achieve the indirect and accurate detection of glutamate within the range of 50 to 700 μM by measuring the generated quantity of NADH during the enzymatic reaction. The proposed biosensor demonstrates remarkable performance characteristics, including a detection sensitivity of 1.95 μA mM-1 and a limit of detection (LOD) of 6.82 μM. The anti-interference tests indicate an average recognition error ranging from -3.85% to +2.60%, spiked sample recovery rates between 95% and 105%, and a relative standard deviation (RSD) of less than 4.97% for three replicate experiments. Therefore, the GLDH-NPG/GCE biosensor presented in this work exhibits excellent accuracy and repeatability, providing a novel alternative for rapid glutamate detection. This research contributes significantly to enhancing the precise monitoring of glutamate concentration, thereby offering more effective guidance and control for human health and nutrition.

A New Highly Sensitive Electrochemical Biosensor for Ethanol Detection Based on Gold Nanoparticles/Reduced Graphene Oxide/Polyallylamine Hydrochloride Nanocomposite

A highly sensitive electrochemical biosensor for ethanol based on a screen-printed electrode modified with gold nanoparticles-electrochemically reduced graphene oxide-poly (allylamine hydrochloride) nanocomposite (AuNPs-ERGO-PAH) is reported in this work. Ethanol was oxidized in the presence of the oxidized form of the nicotinamide adenine dinucleotide (NAD+) in a reaction catalyzed by alcohol dehydrogenase (ADH) immobilized in sol-gel. The AuNPs-ERGO-PAH nanocomposite was used as a transducer for the electrocatalytic oxidation of the reduced form the nicotinamide adenine dinucleotide (NADH) produced in the enzyme reaction. Under the optimal conditions, the ethanol biosensor exhibits a wide dynamic range from 0.05 to 5 mM with a low detection limit of 10 µM (S/N = 3) and a high sensitivity of 44.6 ± 0.07 µA/mM·cm2 for the linear range between 0.05 and 0.2 mM. The biosensor response was stable for up to 6 weeks. Furthermore, the developed biosensor has been used to detect ethanol in alcoholic beverages with good results, suggesting its potential application in various fields, including fermentation processes and food quality control.

A web of poly(bisbenzimidazolatocopper(ii)) around multiwalled carbon nanotubes for the electrochemical detection of hydrogen peroxide

The present work focuses on the electrochemical determination of hydrogen peroxide (H2O2), using a poly(bisbenzimidazolatocopper(ii)) coordinated multiwalled carbon nanotube modified glassy carbon electrode (MWCNT/(BIM–Cu2+)n@GCE).

Polydopamine nanofilms for high-performance paper-based electrochemical devices

Since the discovery of polydopamine (PDA), there has been a lot of progress on using this substance to functionalize many different surfaces. However, little attention has been given to prepare functionalized surfaces for the preparation of flexible electrochemical paper-based devices. After fabricating the electrodes on paper substrates, we formed PDA on the surface of the working electrode using a chemical polymerization route. PDA nanofilms on carbon were characterized by contact angle (CA) experiments, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy (topography and electrical measurements) and electrochemical techniques. We observed that PDA introduces chemical functionalities (RNH₂ and RC═O) that decrease the CA of the electrode. Moreover, PDA nanofilms did not block the heterogeneous electron transfer. In fact, we observed one of the highest standard heterogeneous rate constants (k_s ) for electrochemical paper-based electrodes (2.5 ± 0.1) × 10^-3  cm s^-1 , which is an essential parameter to obtain larger currents. In addition, our results suggest that carbonyl functionalities are ascribed for the redox activity of the nanofilms. As a proof-of-concept, the electrooxidation of nicotinamide adenine dinucleotide showed remarkable features, such as, lower oxidation potential, electrocatalytic peak currents more than 30 times higher when compared to unmodified paper-based electrodes and electrocatalytic rate constant (k_obs ) of (8.2 ± 0.6) × 10²  L mol^-1  s^-1 .

Electrochemical assay of sorbitol dehydrogenase at PEDOT modified electrodes - a new milk biomarker for confirmation of pregnancy in dairy cattle

A robust electrochemical assay for sorbitol dehydrogenase (SORDH) activity in milk was developed using voltammetry and chronocoulometry at bare and polymer modified transducers. The motivation for the work was to evaluate the potential of SORDH as an early biomarker of bovine pregnancy using milk as sample matrix. SORDH is an enzyme involved in carbohydrate metabolism converting sorbitol, the sugar alcohol form of glucose, into fructose, with NAD+ as a cofactor being simultaneously reduced to NADH. The assay was optimised via direct NADH oxidation on glassy carbon and screen printed carbon electrodes followed by electropolymerisation of 3,4-ethylenedioxythiophene (EDOT) monomer to form an NADH responsive PEDOT surface which operated well in undiluted milk samples. Assay conditions such as incubation time and temperature were optimised resulting in a 3 min assay at 37 °C in the presence of 10 mM NAD+ and 20 mM sorbitol co-substrates, enabling NADH electro oxidation (linear range 0.25-5 mM, sensitivity 9.17 μC cm-2 mM-1 in undiluted milk). SORDH determination followed over the range 0.31-10 U mL-1 in milk samples with sensitivity 5.45 μC cm-2 U-1 mL with LOD 0.0787 U mL-1. The assay was applied to milk sample testing acquired as part of an approved animal study involving control and breeding cycles of dairy cows with focus on analysis at day 19 post artificial insemination. Significant differences between control and pregnant SORDH levels in whole milk animal samples were found (average values 2.57 and 4.07 ng mL-1 respectively), as verified using a commercial SORDH ELISA optical assay. Finally, progesterone monitoring over days 16-21 of the oestrous cycle employed an optical ELISA assay and confirmed maintenance of progesterone levels from day 19 onwards.

Bio-inspired PtNPs/Graphene nanocomposite based electrocatalytic sensing of metabolites of dipyrone

Noble metal nanoparticles are known to electrocatalyze various redox reactions by improving the electron transfer kinetics. In the present study, we have introduced a facile bioinspired synthesis of PtNPs and their integration for the formation of PtNPs/graphene nanocomposite using Psidium guajava (guava) leaves extract. Graphene used in nanocomposite formulation was synthesized by exfoliation of graphite in water/acetone (25:75 v/v) mixture followed by mechanical shearing using ultrasonication and microwave irradiation. PtNPs/graphene nanocomposite was drop-cast onto a glassy carbon electrode (GCE, 3 mm dia). The electrocatalytic activity of PtNPs/graphene nanocomposite was tested in a three-electrode system for sensing of metabolic products of dipyrone (DIP) formed through 1 e^- and 2 e^- transfer reactions. The modified electrode exhibited almost 50% reduction in electrode resistance. The limit of detection was found to be 0.142 μM with sensitivities of 0.820 and 0.445 μA․μM^-1cm^-2 for DIP concentration below and above 100 μM, respectively, using square wave voltammetry. The signal of sensing of metabolites of DIP was almost invariant in the presence of glucose, dopamine, uric acid, and ciprofloxacin; however, the response current was decayed by 20% within the 10th cycle. The sensing of DIP spiked in treated sewage-water and running tap-water samples was ∼100% recoverable and comparable with HPLC.

Positively-charged hierarchical PEDOT interface with enhanced electrode kinetics for NADH-based biosensors

Poly(ethylenedioxythiophene) (PEDOT) has attracted considerable attention as an advanced electrode material for electrochemical sensors and biosensors, due to its unique electrical and physicochemical properties. Here, we demonstrate the facile preparation of a positively-charged and hierarchical micro-structured PEDOT electrochemical interface with enhanced electrode kinetics for the electrooxidation of NADH. Processable PEDOT colloidal microparticles (PEDOT CMs) were synthesised by template-assisted polymerisation and were then utilised as building blocks for the fabrication of hierarchically-structured electrodes with a larger accessible electroactive surface (2.8 times larger than that of the benchmark PEDOT:PSS) and inter-particle space, thus improving electrode kinetics. The intrinsic positive charge of the PEDOT CMs further facilitated the detection of negatively-charged molecules by electrostatic accumulation. Due to the synergistic effect, these hierarchically-structured PEDOT CMs electrodes exhibited improved NADH electrooxidation at lower potentials and enhanced electrocatalytic activity compared to the compact structure of conventional PEDOT:PSS electrodes. The PEDOT CMs electrodes detected NADH over the range of 20-240 μM, with a sensitivity of 0.0156 μA/μM and a limit of detection of 5.3 μM. Moreover, the PEDOT CMs electrode exhibited a larger peak separation from the interferent ascorbic acid, and improved stability. This enhanced analytical performance for NADH provides a sound basis for further work coupling to a range of NAD-dependent dehydrogenases for applications in biosensing, bio-fuel cells and biocatalysis.

Highly sensitive amperometric biosensor for determination of NADH and ethanol based on Au-Ag nanoparticles/poly(L-Cysteine)/reduced graphene oxide nanocomposite

This work presents the fabrication of a novel nicotinamide adenine dinucleotide (NADH) sensor using gold-silver bimetallic nanoparticles (Au-AgNPs), poly(L-Cysteine) (P(L-Cys)) and electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode (GCE/Au-AgNPs/P(L-Cys)-ERGO). The composite electrode exhibited an excellent electrocatalytic response towards NADH at a low oxidation potential (+ 0.35V) and minimization of surface contamination due to the synergistic effects of the Au-AgNPs, polymer and ERGO. Under optimum conditions, modified sensors allowed the detection of NADH with a wide linear range from 0.083µM to 1.05mM with a low detection limit of 9.0nM (S/N = 3). Moreover, this modified electrode was also used as a sensitive ethanol biosensor, which was prepared with alcohol dehydrogenase (ADH) via glutaraldehyde, bovin serum albumin and nafion (Naf). There was a linear response for ethanol in the concentration range from 0.017 to 1.845mM with a low detection limit of 5.0µM (S/N = 3). The GCE/Au-AgNPs/P(L-Cys)-ERGO/ADH/Naf electrode can be successfully used for the determination of ethanol in different commercial beverages.

New approach to biosensing of co-enzyme nicotinamide adenine dinucleotide (NADH) by incorporation of neutral red in aluminum doped nanostructured ZnO thin films

Biosensing of NADH on bare electrodes has drawbacks such as high over-potential and poisoning during the oxidation reaction. To overcome this challenge a different approach has been undertaken by incorporating neutral red (NR) in Al doped ZnO (AZO) thin films using one-pot chemical bath deposition (CBD). The surface morphology of the films was hexagonal nanorods along the c-axis, perpendicular to the substrate. The thickness of the thin films were ranging from 400 to 3000nm varying dependent on time of deposition (30 to 150min). The average diameter of the nanorods was larger in the presence of neutral red (NR-AZO) with ~300nm in contrast to its absence (AZO) with ~200nm. The density of the packing of nanorods was dependent on the citrate concentration used during deposition. Control over the dopant concentration in the films was achieved by varying the area of Al foil used in the deposition solution. The selected area diffraction (SAED) and X-ray diffraction (XRD) indicated 002 plane of orientation in the nanorods. FTIR and FT-Raman analysis revealed conserved structure of NR and AZO. Chronoamperometric (CA) analysis showed a sensitivity of 0.45μAcm^-2mM^-1 and LoD of 22μM within the range 0.075-4mM of NADH. The biological sensing of NADH was validated by physical adsorption of NAD⁺ dependent-lactate dehydrogenase (LDH) on NR-AZO. CA showed sensitivity of 0.56μAcm^-2mM^-1 and LoD for lactate was 27μM in the range of 0.1-1mM of lactate. Further validation with real-time serum sample shows that LDH/NR-AZO correlates with the clinical values. The distinction in this study is that the organic mediator like neutral red has been incorporated into the grain structure of the ZnO thin film whereas other study with the mediators have only attempted surface functionalization. This article is part of a Special Issue entitled "Recent Advances in Bionanomaterials" Guest Editor: Dr. Marie-Louise Saboungi and Dr. Samuel D. Bader.

Single-walled carbon nanotubes covalently functionalized with polytyrosine: A new material for the development of NADH-based biosensors

We report for the first time the use of single-walled carbon nanotubes (SWCNT) covalently functionalized with polytyrosine (Polytyr) (SWCNT-Polytyr) as a new electrode material for the development of nicotinamide adenine dinucleotide (NADH)-based biosensors. The oxidation of glassy carbon electrodes (GCE) modified with SWCNT-Polytyr at potentials high enough to oxidize the tyrosine residues have allowed the electrooxidation of NADH at low potentials due to the catalytic activity of the quinones generated from the primary oxidation of tyrosine without any additional redox mediator. The amperometric detection of NADH at 0.200V showed a sensitivity of (217±3)µAmM(-1)cm(-2) and a detection limit of 7.9nM. The excellent electrocatalytic activity of SWCNT-Polytyr towards NADH oxidation has also made possible the development of a sensitive ethanol biosensor through the immobilization of alcohol dehydrogenase (ADH) via Nafion entrapment, with excellent analytical characteristics (sensitivity of (5.8±0.1)µAmM(-1)cm(-2), detection limit of 0.67µM) and very successful application for the quantification of ethanol in different commercial beverages.

Synergistic effect of pyrroloquinoline quinone and graphene nano-interface for facile fabrication of sensitive NADH biosensor

A self-assembly composite of graphene-pyrroloquinoline quinone (PQQ) was fabricated and modified on glassy carbon electrode (GCE) for sensitive detection of nicotinamide adenine dinucleotide (NADH). Chitosan (CTS) was applied to disperse graphene to form a stable robust film on GCE. A synergistic effect between PQQ and graphene was observed during the electrocatalytic oxidation of NADH, with about 260mV reduction in the oxidation potential and 2.5-fold increase in the oxidation current compared with those on the bare GCE. The electrochemical sensors based on the modified electrodes allowed the detection of NADH with a good linear dependence from 0.32 to 220µM with a high sensitivity of 0.421µAµM^-1cm^-2 and a low detection limit of 0.16µM (S/N=3). It could also eliminate the interference of electroactive substances like ascorbic acid (AA), uric acid, and dopamine and its derivatives. The outstanding performances of graphene-PQQ/CTS composite capable of improving the electrical conductivity and accelerating the electron transport suggested its promising applications for design of different graphene based composites used in electrochemical sensing and energy fields.

Conducting polymer and its composite materials based electrochemical sensor for Nicotinamide Adenine Dinucleotide (NADH)

Nicotinamide Adenine Dinucleotide (NADH) is an important coenzyme in the human body that participates in many metabolic reactions. The impact of abnormal concentrations of NADH significantly causes different diseases in human body. Electrochemical detection of NADH using bare electrode is a challenging task especially in the presence of main electroactive interferences such as ascorbic acid (AA), uric acid (UA) and dopamine (DA). Modified electrodes have been widely explored to overcome the problems of poor sensitivity and selectivity occurred from bare electrodes. This review gives an overview on the progress of using conducting polymers, polyelectrolyte and its composites (co-polymer, carbonaceous, metal, metal oxide and clay) based modified electrodes for the sensing of NADH. In addition, developments on the fabrication of numerous conducting polymer composites based modified electrodes are clearly described.