Novel photoelectrochemical hydrogen peroxide sensor based on hemin sensitized nanoporous NiO based photocathode

Advanced Interface Engineering in Gradient Core/Shell Quantum Dots Enables Efficient Photoelectrochemical Hydrogen Evolution

Semiconductor core/shell quantum dots (QDs) are considered promising building blocks to fabricate photoelectrochemical (PEC) cells for the direct conversion of solar energy into hydrogen (H2). However, the lattice mismatch between core and shell in such QDs results in undesirable defects and severe carrier recombination, limiting photo-induced carrier separation/transfer and solar-to-fuel conversion efficiency. Here, an interface engineering approach is explored to minimize the core-shell lattice mismatch in CdS/CdSexS1-x (x = 0.09-1) core/shell QDs (g-CSG). As a proof-of-concept, PEC cells based on g-CSG QDs yield a remarkable photocurrent density of 13.1 mA cm-2 under AM 1.5 G one-sun illumination (100 mW cm-2), which is ≈54.1% and ≈33.7% higher compared to that in CdS/CdSe0.5S0.5 (g-CSA) and CdS/CdSe QDs (g-CS), respectively. Theoretical calculations and carrier dynamics confirm more efficient carrier separation and charge transfer rate in g-CSG QDs with respect to g-CSA and g-CS QDs. These results are attributed to the minimization of the core-shell lattice mismatch by the cascade gradient shell in g-CSG QDs, which modifies carrier confinement potential and reduces interfacial defects. This work provides fundamental insights into the interface engineering of core/shell QDs and may open up new avenues to boost the performance of PEC cells for H2 evolution and other QDs-based optoelectronic devices.

Ni/WS2/WC Composite Nanosheets as an Efficient Catalyst for Photoelectrochemical Hydrogen Peroxide Sensing and Hydrogen Evolution

It is highly attractive to develop a photoelectrochemical (PEC) sensing platform based on a non-noble-metal nano array architecture. In this paper, a PEC hydrogen peroxide (H2O2) biosensor based on Ni/WS2/WC heterostructures was synthesized by a facile hydrothermal synthesis method and melamine carbonization process. The morphology, structural and composition and light absorption properties of the Ni/WS2/WC catalyst were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer. The average size of the Ni/WS2/WC nanosheets was about 200 nm. Additionally, the electrochemical properties toward H2O2 were studied using an electrochemical workstation. Benefiting from the Ni and C atoms, the optimized Ni/WS2/WC catalyst showed superior H2O2 sensing performance and a large photocurrent response. It was found that the detection sensitivity of the Ni/WS2/WC catalyst was 25.7 μA/cm2/mM, and the detection limit was 0.3 mmol/L in the linear range of 1-10 mM. Simultaneously, the synthesized Ni/WS2/WC electrode displayed excellent electrocatalytic properties in hydrogen evolution reaction (HER), with a relatively small overpotential of 126 mV at 10 mA/cm2 in 0.5 M H2SO4. This novel Ni/WS2/WC electrode may provide new insights into preparing other efficient hybrid photoelectrodes for PEC applications.

Light responsive Fe-Tcpp@ICG for hydrogen peroxide detection and inhibition of tumor cell growth

In this work, we synthesized Fe-Tcpp@ICG(ICG, Indocyanine green) with light stimuli-response through 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (Fe-Tcpp) loaded ICG by electrostatic adsorption. The morphology and properties of Fe-Tcpp and Fe-Tcpp@ICG were characterised by ultraviolet-visible absorption spectrometer, X-ray diffraction, thermogravimetric analyzer and transmission electron microscope, respectively. A non-enzymatic photoelectrochemical sensor based on Fe-Tcpp@ICG was constructed to quantitatively detect hydrogen peroxide in tumor microenvironment. Under the optimal conditions, the linear range of detecting hydrogen peroxide was 0.01-50 mmol/L with detection limit of 0.2 μmol/L (S/N = 3). This sensor proposed a simple, fast, sensitive and label-free method for the detection of hydrogen peroxide. Moreover, the results also showed that the Fe-Tcpp@ICG can catalyze the decomposition of hydrogen peroxide to generate singlet oxygen, which can kill tumor cells. These indicated that this material was expected to be used for detecting hydrogen peroxide and inhibition of tumor cell growth.

Electrochemical Biosensors Employing Natural and Artificial Heme Peroxidases on Semiconductors

Heme peroxidases are widely used as biological recognition elements in electrochemical biosensors for hydrogen peroxide and phenolic compounds. Various nature-derived and fully synthetic heme peroxidase mimics have been designed and their potential for replacing the natural enzymes in biosensors has been investigated. The use of semiconducting materials as transducers can thereby offer new opportunities with respect to catalyst immobilization, reaction stimulation, or read-out. This review focuses on approaches for the construction of electrochemical biosensors employing natural heme peroxidases as well as various mimics immobilized on semiconducting electrode surfaces. It will outline important advances made so far as well as the novel applications resulting thereof.

Luminescence-Sensing Tb-MOF Nanozyme for the Detection and Degradation of Estrogen Endocrine Disruptors

Using flexible structures and components of metal-organic framework (MOF) materials, we designed and developed an artificial nanozyme with dual functions of a catalyst and luminescent sensor specifically for the determination and degradation of hormone 17β-estradiol (E2) and its derivatives (E1, E3, and EE2), a class of disruptors with strong effect on the human endocrine system. This nanozyme composed of the luminescent Tb³⁺ ion, catalytic coenzyme factor hemin, and light-harvesting ligand can be used to both degrade E2 like natural horseradish peroxidase (HRP) and sense E2 as low as 50 pM by its luminescence. The nanozyme catalyzes the decomposition of E2 and its derivatives through a mechanism of active hydroxyl radicals and oxidative high-valent iron-oxo intermediates. The prepared nanozyme is pluripotent, stable, and cheap and can replace the widely used combination of natural enzyme and chromogenic substrate. The present strategy of constructing artificial enzymes directly from functional units provides a new way for the design and development of smart, multifunctional artificial enzymes.

A self-powered photoelectrochemical biosensor for H2O2, and xanthine oxidase activity based on enhanced chemiluminescence resonance energy transfer through slow light effect in inverse opal TiO2

TiO₂ inverse opal photonic crystals (IOPCs) were fabricated by using polystyrene template. TiO₂ IOPCs based photoelectrochemical (PEC) biosensor was fabricated for the precise and stable detection of Heme without external irradiation. Then, the sensitization of TiO₂ IOPCs was fulfilled with CdS quantum dots (QDs) by SILAR method to form ITO-TiO₂ IOPCs-CdS:Mn electrode, which in turn was used to construct a PEC biosensor. The uniform porous structure of IOPCs with a large surface area is conducive to the excellent electronic transmission and QDs deposition. Also, the energy level matching between the conduction bands of CdS QDs and TiO₂ IOPCs widened the range of light absorption, allowing for electron injection from excited CdS QDs to TiO₂ upon luminol chemiluminescence, which enhanced the photocurrent. Furthermore, when the red edge of the photonic stop band of TiO₂ IOPCs overlapped with the band gap of TiO₂, and chemiluminescence emission of luminol, a substantial photocurrent increment was observed due in part to the slow light effect. The biosensor possesses a large linear detection range of 0.063-4 mM with a LOD of 19 μM for H₂O₂. Also, xanthine oxidase activity was determined with a linear measurement range of 0.01-15 mU/mL. Our strategy opens a new horizon to IOPCs based and QDs sensitized PEC sensing, which could be more sensitive, convenient and inexpensive for clinical and biological analysis. As far as we know, the largest photocurrent generation by luminol chemiluminescence was observed thanks to the use of semiconducting hybrid IOPCs material even at 0 V.

Hemin-Modified SnO2/Metglas Electrodes for the Simultaneous Electrochemical and Magnetoelastic Sensing of H2O2

In this work, we present a simple and efficient method for the preparation of hemin-modified SnO2 films on Metglas ribbon substrates for the development of a sensitive magneto-electrochemical sensor for the determination of H2O2. The SnO2 films were prepared at low temperatures, using a simple hydrothermal method, compatible with the Metglas surface. The SnO2 film layer was fully characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), photoluminescence (PL) and Fourier Transform-Infrared spectroscopy (FT-IR). The properties of the films enable a high hemin loading to be achieved in a stable and functional way. The Hemin/SnO2-Metglas system was simultaneously used as a working electrode (WE) for cyclic voltammetry (CV) measurements and as a magnetoelastic sensor excited by external coils, which drive it to resonance and interrogate it. The CV scans reveal direct reduction and oxidation of the immobilized hemin, as well as good electrocatalytic response for the reduction of H2O2. In addition, the magnetoelastic resonance (MR) technique allows the detection of any mass change during the electroreduction of H2O2 by the immobilized hemin on the Metglas surface. The experimental results revealed a mass increase on the sensor during the redox reaction, which was calculated to be 767 ng/μM. This behavior was not detected during the control experiment, where only the NaH2PO4 solution was present. The following results also showed a sensitive electrochemical sensor response linearly proportional to the concentration of H2O2 in the range 1 × 10−6–72 × 10−6 M, with a correlation coefficient of 0.987 and detection limit of 1.6 × 10−7 M. Moreover, the Hemin/SnO2-Metglas displayed a rapid response (30 s) to H2O2 and exhibits good stability, reproducibility and selectivity.