Novel design of non-enzymatic sensor for rapid monitoring of hydrogen peroxide in water matrix

Gold nanoparticles plated porous silicon nanopowder for nonenzymatic voltammetric detection of hydrogen peroxide

A voltammetric approach was developed for the selective and sensitive determination of hydrogen peroxide using Au plated porous silicon (PSi) nanopowder modified glassy carbon electrode (GCE). The AuNPs-PSi hybrid structure was synthesized via stain etching procedure followed by an immersion plating method to deposit AuNPs onto PSi via a simple galvanic displacement reaction with no external reducing agent to convert Au³⁺ to Au⁰. The as-fabricated AuNPs-PSi catalyst was successfully characterized by XRD, Raman, FTIR, XPS, SEM, TEM and EDS techniques. Well crystalline nature of the as-fabricated hybrid structure with AuNPs size ranging from 5 to 40 nm was observed. The specific surface area and total pore volume for both PSi and AuNPs plated PSi were evaluated using N₂ adsorption isotherm technique. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the catalytic efficiency of AuNPs-PSi modified electrode compared to pure PSi/GCE and unmodified GCE. The sensing performance of the active material modified GCE was thoroughly examined with linear sweep voltammetry (LSV) and square wave voltammetry (SWV) techniques. The AuNPs-PSi/GCE exhibited a remarkable linear dynamic range between 2.0 and 13.81 mM (for LSV) and 0.5-6.91 mM for (SWV) with high sensitivity and low detection limit of 10.65 μAmM^-1cm^-2 and 14.84 μM for LSV, whereas 10.41 μAmM^-1cm^-2 and 15.16 μM using SWV techniques, respectively. The fabricated sensor electrode showed excellent anti-interfering ability in the presence of several common biomolecules as well as demonstrated good operational stability and reproducibility with low relative standard deviation. Moreover, the modified electrode showed acceptable recovery of H₂O₂ in a real sample analysis. Thus, the developed AuNPs-PSi hybrid nanomaterial represents an excellent electrocatalyst for the efficient detection and quantification of H₂O₂ by the electrochemical approach.

On-line Measurement of Sub-ppb Level Hydrogen Peroxide in Ultrapure Water Production Process

An on-line H2O2 analyzer was developed for application to the ultrapure water production process, using a gasometric method. The analyzer consists of a dissolved oxygen (DO) sensor and analyzer, a catalyst that converts H2O2 to O2, and a computer that stores the DO data. H2O2 concentrations were calculated by measuring the change in DO concentration before and after the catalyst and using the calculation formula presented in this study. In order to accurately analyze a sub-ppb level of H2O2, a DO meter which can correctly measure the DO concentration at the ppb level was applied. An ion exchange resin with Pd, was selected as an appropriate catalyst since it could decompose 99% of H2O2 to O2 at a space velocity of 120/h. The minimum analysis time was 20 min, and the detection limit was observed to be 0.27 ppb. When the DO concentration of the sample was 1.5 ppb or lower, an H2O2 concentration of 1 ppb or lower was successfully measured. Good correlation, with an R2 value of 0.99, was observed between the measured and calculated H2O2 concentrations.

A sensitive non-enzymatic electrochemical sensor based on acicular manganese dioxide modified graphene nanosheets composite for hydrogen peroxide detection

In this work, a novel manganese dioxide-graphene nanosheets (MnO₂-GNSs) composite was synthesized by a facile one-step hydrothermal method, in which manganese dioxide (MnO₂) was fabricated by hydrothermal reduction of KMnO₄ with GNSs. The structure and morphology of MnO₂-GNSs composite were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis and X-ray photoelectron spectroscopy (XPS). A sensitive non-enzymatic electrochemical sensor based on MnO₂-GNSs composite for the detection of low concentration hydrogen peroxide (H₂O₂) was fabricated. The electrochemical properties of MnO₂-GNSs composite modified glassy carbon electrode (MnO₂-GNSs/GCE) were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and amperometry. The observations confirmed that the fabricated sensor exhibited high electrocatalytic activity for oxidation of H₂O₂ owing to the catalytic ability of MnO₂ particles and the conductivity of GNSs. Under the optimum conditions, the calibration curve was linear for the amperometric response versus H₂O₂ concentration over the range 0.5-350 μM with a low detection limit of 0.19 μM (S/N = 3) and high sensitivity of 422.10 μA mM^-1 cm^-2. The determination and quantitative analysis of H₂O₂ in antiseptic solution on MnO₂-GNSs/GCE exhibited percent recovery of 96.50%-101.22% with relative standard deviation (RSD) of 1.48%-4.47%. The developed MnO₂-GNSs/GCE might be a promising platform for the practical detection of H₂O₂ due to its prominent properties including excellent reproducibility, good anti-interference and repeatability.

Electrochemically Prepared Unzipped Single Walled Carbon Nanotubes-MnO2 Nanostructure Composites for Hydrogen Peroxide and Glucose Sensing

Amperometric hydrogen peroxide (H2O2) and glucose biosensors based on unzipped carbon nanotubes with modified glassy carbon electrode (GCE) have been successfully fabricated via a facile electrochemical oxidative method. In this work, we investigated the feasibility of this new form of carbon nanomaterial as a substrate electrode material for fabricating sensitive platform for H2O2 and glucose sensors. For this purpose, the manganese oxide (MnO2)/unzipped single-walled carbon nanotubes (SWCNTs) film was synthesized by the cyclic voltammetry method. The developed sensing film, MnO2/unzipped SWCNTs/GCE, displayed a satisfactory analytical performance for H2O2, including a wide linear range of 2.0 × 10−6 to 5.0 × 10−3 M with a detection limit of 0.31 × 10−6 M (10.7 ppb). This film was further applied for glucose sensing with a linearity range of 0.01 to 1.2 mM with a correlation coefficient of 0.9822 in the physiological pH (7.4). This facile, fast, environmentally-friendly, and economical preparation strategy of carbon nanomaterial-based electrode materials opens up the possibility of developing high quality biocompatible hydrogen peroxide and glucose sensors.