The electropolymerization of CTAB on glassy carbon electrode for simultaneous determination of dopamine, uric acid, tryptophan and theophylline

MWCNTs-CTAB and HFs-Lac Nanocomposite-Modified Glassy Carbon Electrode for Rutin Determination

Rutin is a flavonoid glycoside compound, which is mainly transported via the blood circulation system in the human body. The monitoring of the blood concentration of rutin is of great significance in many fields such as pharmacology and pharmacokinetics. In this work, a biosensor based on multi-walled carbon nanotubes (MWCNTs), cetyltrimethylammonium bromide (CTAB), hydroxyl fullerenes (HFs), and laccase (Lac) nanocomposite-modified glassy carbon electrodes was constructed. The modified materials were characterized with a transmission electron microscope (TEM), cyclic voltammograms (CV), and electrochemical impedance spectroscopy (EIS). CTAB is used to disperse MWCNTs and improve hydrophilicity and biocompatibility of MWCNTs, while the use of Lac can enhance the oxidation of catechol structure in rutin, thus significantly improving the sensitivity and selectivity of the modified electrode. Linear sweep voltammetry (LSV) studies showed that the determination linear ranges of rutin were 0.1 µmol L⁻¹ to 2 µmol L⁻¹ and 2 µmol L⁻¹ to 11 µmol L⁻¹, with the determination limits of 30 nmol L⁻¹ and 95.5 nmol L⁻¹, respectively. The proposed biosensor can be used to detect rutin tablets and serum samples with high recovery, which indicates a good accuracy of this method, and the results are consistent with those measured by the traditional ultra-high performance liquid chromatography (UHPLC) method. Hence, this biosensor has potential practical application value in rutin drug quality testing and clinical blood drug concentration monitoring.

An Electrochemical Electrode to Detect Theophylline Based on Copper Oxide Nanoparticles Composited with Graphene Oxide

The electrochemical analysis of theophylline (THP) was investigated by fabricating a carbon paste electrode (CPE) modified with graphene oxide (GO) along with copper oxide (CuO) nanoparticles (CuO-GO/CPE). The impact of electro-kinetic parameters such as the heterogeneous rate constant, the scan rate, the accumulation time, the pH, the transfer coefficient, and the number of electrons and protons transferred into the electro-oxidation mechanism of THP has been studied utilizing electrochemical methods such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The differential pulse voltammetry technique was employed to investigate THP in pharmaceutical and biological samples, confirming the limit of detection (LOD) and quantification (LOQ) of the THP. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were performed to characterize the CuO nanoparticles. The CuO-GO/CPE was more sensitive in THP detection because its electrocatalytic characteristics displayed an enhanced peak current in the 0.2 M supporting electrolyte of pH 6.0, proving the excellent sensing functioning of the modified electrode.

Nano optical and electrochemical sensors and biosensors for detection of narrow therapeutic index drugs

For the first time, a comprehensive review is presented on the quantitative determination of narrow therapeutic index drugs (NTIDs) by nano optical and electrochemical sensors and biosensors. NTIDs have a narrow index between their effective doses and those at which they produce adverse toxic effects. Therefore, accurate determination of these drugs is very important for clinicians to provide a clear judgment about drug therapy for patients. Routine analytical techniques have limitations such as being expensive, laborious, and time-consuming, and need a skilled user and therefore  the nano/(bio)sensing technology leads to high interest.

Lu(iii) bis-phthalocyanines containing carbazole moieties: synthesis, characterization, electrochemical properties and sensor applications

In this study, the synthesis and characterization of sandwich type Lu(iii) bis-phthalocyanines bearing electropolymerizable carbazole groups were evaluated and their electrochemical sensing properties studied towards DA, UA and AA.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

Improved effect of deep eutectic solvents on polymeric film of surfactant: application in determination and discrimination of dihydroxybenzene isomers as model molecules

The simultaneous determination of hydroquinone and catechol with different deep eutectic solvents (DESs) employed in the polymerization step of cetyltrimethylammonium bromide (CTAB) on an oxidized glassy carbon electrode is studied.

Colorimetric theophylline aggregation assay using an RNA aptamer and non-crosslinking gold nanoparticles

The authors are presenting a rapid method for the determination of theophylline using unique non-crosslinking gold nanoparticle (AuNP) aggregation. An RNA aptamer against theophylline is firstly split into two RNA fragments which then interact with bare AuNPs. The two RNA probes cause an enhancement of the salt tolerance of AuNPs. However, in the presence of theophylline, the RNA probes form a complex with theophylline so that less RNA probes are available to protect the AuNPs from salt-induced aggregation. Theophylline induced aggregation of AuNPs is accompanied by a color change from red to blue. The color change can be detected visually and via UV-vis absorptiometry by ratioing the absorbances at 650 and 520 nm. The ratio increases linearly in the 0.1 to 20 μM theophylline concentration range, with a 67 nM limit of detection. The method is highly sensitive and selective. Graphical abstract Single-stranded split RNA aptamers (R1 and R2) protect gold nanoparticles (AuNPs) from salt-induced non-crosslinking aggregation. After recognition of theophylline by the RNA probe, the unprotected AuNPs aggregate and undergo a color change from red to blue, and this is used to quantify the theophylline concentration.

A highly sensitive gold nanoparticle-based electrochemical aptasensor for theophylline detection

Theophylline is a common bronchodilator for the treatment of diseases like asthma, bronchitis and emphysema. However, it should be strictly used and monitored due to its toxicity when the concentration is above certain levels. In this work, an electrochemical biosensor for theophylline detection is proposed by recognition of RNA aptamer and gold nanoparticle (AuNP)-based amplification technique. First, RNA aptamer is splitted into two single-stranded RNA probes. One is hybridized with DNA tetrahedron and the resulted nanostructure is then immobilized onto a gold electrode; the other is modified on the surface of AuNPs which is also labeled with methylene blue (MB) as electrochemical species. The recognition process between the two RNA probes and theophylline causes the localization of AuNPs and the enrichment of MB on the electrode interface. A significant electrochemical response is thus generated which is related to the concentration of initial theophylline. This proposed aptasensor shows excellent sensitivity and selectivity which could also be applied in quantitatively detection of theophylline in serums samples.

Hand-in-hand RNA nanowire-based aptasensor for the detection of theophylline

Theophylline is a popular drug for many respiratory diseases. However, certain toxic side effects may be developed and the narrow safety range raises the demand for sensitive methods to constantly monitor theophylline levels. This study presents an electrochemical approach towards theophylline detection based on the recognition by split RNA aptamers. Target induced construction of hand-in-hand RNA nanowire on the electrode surface could further absorb silver nanoparticles (Ag NPs) as electrochemical species. When theophylline is not present, RNA probes are stable and their conformations remain unchanged. In contrast, theophylline is able to trigger the hairpin opening of RNA probe and subsequent self-assembly of RNA nanowire, which could be captured by DNA tetrahedron on the electrode interface. After further decorating Ag NPs on the nanowire, silver stripping current is measured to reveal initial theophylline concentration. The developed sensing strategy shows excellent specificity and sensitivity with the limit of detection of 50nM. Its practical utility is demonstrated by quantitative determination of theophylline levels in complex biological samples.