Anion-selective electrodes based on solidified 1,3-dihexadecylimidazolium ionic liquids with halide and pseudohalide anions

Electrocatalytic efficiency of carbon nitride supported gold nanoparticle based sensor for iodide and cysteine detection

Extensive investigations are being conducted on gold nanoparticles focusing on their applications in biosensors, laser phototherapy, targeted drug delivery and bioimaging utilizing advanced detection techniques. In this work, an electrochemical sensor was developed based on graphite carbon nitride supported gold nanoparticles. Carbon nitride supported gold nanoparticles (Au-CN) was synthesized by applying a deposition-precipitation route followed by a chemical reduction technique. The composite system was characterized by X-ray diffraction and X-ray photo electron spectroscopy methods. Electron microscopy analysis confirmed the formation of gold nanoparticles within the size range of 5-15 nm on the carbon nitride support. Carbon nitride supported gold based sensor was employed for the electrochemical detection of iodide ion and l-cysteine. The limit of detection and sensitivity of the sensor was attained 8.9 μM and 0.96 μAμM⁻1cm⁻2, respectively, for iodide ion, while 0.48 μM and 5.8 μAμM⁻1cm⁻2, respectively, was achieved for the recognition of cysteine. Furthermore, a paper-based electrochemical device was developed using the Au-CN hybrid system that exhibited promising results in detecting iodide ions, highlighting its potential for economic and portable device applications.

Application of ionic liquids in ion-selective electrodes and reference electrodes: A review

Ionic liquids (ILs) are organic chemical compounds that are composed only of ions, a large organic cation and a smaller inorganic or organic anion. These are salts whose melting point is lower than the boiling point of water. ILs have many interesting properties, thanks to which they find great practical applications in analytics, electrochemistry, separation techniques, catalysis and others. One of the many areas of application of ionic liquids is sensors especially electrochemical sensors including ion-selective electrodes. In this case, the properties of ILs that are particularly useful include very good electrical conductivity, high electrochemical stability, good extraction properties, hydrophobic character and compatibility with other materials, e. g. polyvinyl chloride plasticizers or carbon nanomaterials. ILs were used as components of ion-selective membranes, both polymeric ones based on PVC and membranes in carbon paste electrodes. ILs performed various functions in these membranes, including lipophilic ionic additive, ionophore/ion exchanger, plasticizer, transducer media and matrix. They were also used as a component of the intermediate layer in solid contact ISEs. The last chapter presents examples of the use of ILs in reference electrodes. This review discusses the use of ionic liquids in ion-selective electrodes (ISEs) and reference electrodes over the last ten years.

Development and validation of the quantitative determination procedure of iodine in the iodides form in the kelp thallus by the ionometry method

Introduction:

Iodine is an important compound in the kelp thallus; it should be determined to control the quality of crude herbal drugs of Laminaria sp. The ionometry method is perspective iodine (in the iodides form) determination method in the crude herbal drugs; it is characterized by the availability and relative cheapness of iodide-selective electrodes and equipment in general. This method provides an effective combination of the determination step with the fast, simple, and safe step of sample preparation.

Aim:

The current study aims to develop and validate a simple, effective procedure for the quantitative determination of iodine in the form of iodide by ionometry in the kelp thallus (Laminaria sp.).

Materials and methods:

The determination of iodides was carried out by using the “Ecotest-120” pH meter. “Ekom-I” was used as an ion-selective electrode. Silver chloride electrode “ESR 10101” was used as a reference electrode.

Results and Discussion:

The developed procedure has a suitable level of linearity (correlation coefficient = 0.9995%), correctness (variation coefficient = 1.58%), repeatability (variation coefficient = 6.67%), and analytical area (0.03–209.4 μg/mL analyte in the test solution). The procedure allows us to determine iodine in the form of iodides with an accuracy comparable to the accuracy of neutron activation analysis and can be recommended as an alternative to titrimetric methods existing in the world-leading pharmacopoeias.

Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends

This article presents a comprehensive overview of recent progress in the design and applications of solid-contact ion-selective electrodes (SC-ISEs).

Solid Contact Potentiometric Sensors Based on a New Class of Ionic Liquids on Thiacalixarene Platform

New solid-contact potentiometric sensors have been developed for hydrogen phosphate recognition on the basis of ionic liquids containing tetrasubstituted derivatives of thiacalix[4]arene in cone and 1,3-alternate conformations with trimethyl- and triethylammonium fragments at the lower rim substituents. The recognition of selected anions including carbonate, hydrogen phosphate, perchlorate, oxalate, picrate, and EDTA was conducted using electrochemical impedance spectroscopy with ferricyanide redox probe. For the potentiometric sensor assembling, the ionic liquids were stabilized by multiwalled carbon nanotubes and carbon black deposited on the glassy carbon electrode. The influence of support, steric factors and modification conditions on the sensor performance has been investigated. As was shown, potentiometric sensors developed make it possible to selectively determine hydrogen phosphate anion within the concentration range from 1 × 10⁻² to 1 × 10⁻⁶ M and limit of detection of 2 × 10⁻⁷−1 × 10⁻⁶ M with unbiased selectivity coefficients varied from 1.2 × 10⁻¹ to 1.0 × 10⁻⁸ (carbonate, acetate, oxalate, succinate, glutharate, glycolate, and malonate anions).