Imipramine sensing in pharmaceutical formulations using boron-doped diamond electrode

Antidepressants determination using an electroanalytical approach: A review of methods

Antidepressants are the pharmaceutical compounds used in the treatment of depression, anxiety disorders and all related disturbances promoted by genetic factors, environmental problems or modern lifestyles. Nonetheless, the inadequate ingestion of antidepressants provokes adverse effects in the human body and can contaminate the environment. For this reason, it is necessary to identify and quantify these compounds in biological fluids, natural water, wastewater, and pharmaceutical formulations. Consequently, this review presents the main electroanalytical techniques used in the analysis of antidepressants, indicating the advantages, which include low cost, suitable analytical parameters, simplified sample preparation steps, easy operation and reduced time for completion of the analysis. Reports in specialized literature, published from 2000 to 2020, are presented and some are discussed, demonstrating that the electroanalytical techniques can be employed, with success, in the determination of antidepressants, indicating alternative methodologies to improve analytical parameters and minimize the use and generation of toxic residues.

Selective electrochemical detection of antidepressant drug imipramine in blood serum and urine samples using an antimony telluride-graphite nanofiber electrode

A high-performance imipramine (IMPR) sensor has been developed  based on metal chalcogenide-carbon composite materials. The antimony telluride-graphite nanofiber (Sb₂Te₃-GNF, hereafter SBT-GNF) composite was synthesized by the hydrothermal method and confirmed by X-ray powder diffraction (XRD) pattern. The morphology, crystalline lattice, and chemical states were characterized by HRTEM, SAED, and XPS analysis. The characterizations confirmed the formation of an effective composite, SBT-GNF. The SBT-GNF was fabricated as a disposable sensor electrode with a screen-printed carbon electrode (SPCE) and examined for the detection of IMPR by differential pulse voltammetry (DPV). The electroanalytical results of SBT-GNF are compared with the SBT and GNF, and the rational design of effective composite is discussed. SBT-GNF/SPCE showed a good linear range (0.01‑51.8 μM), sensitivity (1.35 ± 0.1 μA μM^-1 cm^-2), and low LOD (4 ± 2 nM). Moreover, the SBT-GNF/SPCE revealed high selectivity and high tolerance limit against potential interfering compounds in blood serum and urine samples. Therefore, this electrochemical sensor can be applicable for the detection of tricyclic antidepressant drug IMPR in clinical and pharmaceutical analysis.

Boron-Doped Diamond Electrodes: Recent Developments and Advances in View of Electrochemical Drug Sensors

Conductive boron-doped diamond (BDD), in addition to its superior material properties, offers many important advantages that make it an interesting material for electroanalytical studies. It has been considered as an excellent electrode material for electrooxidation of drug active compounds in their dosage forms or in biological materials due to its good physical and chemical properties. It contains not only the largest solvent working potential window compared to other electrode materials, but also it has low background and capacitive currents; lower problems with passivation and it has the ability to withstand extreme potentials, corrosive, and high temperature/pressure environments. The aim of this review is not only to provide a state-of-the-art of diamond electrochemistry but also to serve as a reference point for any researcher wishing to commence work with diamond electrodes and understand electrochemical data. Therefore, it is focused on the carbon-based materials, electrochemical properties of the BDD film electrode, its fundamental research, and its electrochemical pretreatment process are discussed in detail. In this case, there are important studies to show the effective BDD drug sensors for the detection and determination of drugs and the present review critically summarizes the available data in this field between 2015 and 2020.

Sonochemical preparation of bismuth oxide nanotiles decorated exfoliated graphite for the electrochemical detection of imipramine

This work described the sonohydrolysis of Bi(NO₃)₃ into Bi₂O₃ and simultaneous sonochemical exfoliation of graphite into graphene sheets in the alkaline environment and its electocatalytic performance towards the detection of anti-depression drug imipramine (IMPR). The ultrasound (37/80 kHz; 60 W) effectively hydrolyzed the Bi(NO₃)₃ into a single crystalline monoclinic phase of Bi₂O₃ nanotiles in the alkaline condition. And also, the sonochemical reaction condition can trigger the lamellar particles on the graphite bulk surface and allowed to exfoliated the graphite (EG) into graphene nanosheets as well. The material characterizations are done by XRD, Raman, FESEM, and HRTEM. It shows the α-Bi₂O₃ nanotiles along with EG nanosheets with high crystallinity and low defects. The (0 0 2) plane in XRD confirms the high crystalline nature of EG. The monoclinic stretching vibrations (90-600 cm^-1) confirms the Raman modes of Bi₂O₃. The prepared Bi₂O₃-EG composites are subjected to the electrochemical determination of IMPR which revealed appreciable analytical performances. The results showed that the Bi₂O₃-EG exhibits better results in the 3 h sonication process. Bi₂O₃-EG-3 exhibited a good linear range (0.02-82.3 µM) and an acceptable limit of detection (6 nM). And also Bi₂O₃-EG-3 exhibits the significant tolerance limit when compared to other potential interfering compounds.

Studies on the sonochemical polymorphism of Sb2O3 on activated graphite for the electrochemical determination of imipramine

This work reports the simultaneous sonochemical activation of graphite and sonohydrolysis of antimony chloride (SbCl₃) in the alkaline medium. The experiments conducted by bath sonicator operated at 37 kHz of frequency and a maximum power of 150 W. The simple sonohydrolysis of SbCl₃ alone produced an orthorhombic phase of Sb₂O₃, whereas, it produced mixed phases of cubic and orthorhombic Sb₂O₃ when introduced with graphite. Herein, the activated graphite (aGR) provides the best support to the growth of cubic phase. This cubic Sb₂O₃ is grown only on the graphite basal planes, which confirmed by scanning electron microscope. Moreover, the phase changes have identified by the X-ray diffraction, Raman and X-ray photoelectron analysis. The prepared aGR-Sb₂O₃ composite has applied to the electroanalytical studies of anti-depressant drug imipramine (IMP). The results showed that aGR-Sb₂O₃ revealed better activity than Sb₂O₃; the reasons are discussed comprehensively. Furthermore, aGR-Sb₂O₃ exhibited comparable analytical results for the determination of IMP.

Electrochemical Analysis of Antipsychotics

Introduction:

Schizophrenia is seizures accompanied by severe psychotic symptoms, and a steady state of continuation in the form of periods of stagnation. Antipsychotics are now the basis of treatment for schizophrenia and there is no other molecule that is antipsychotic priority in treatment. Antipsychotics can be classified into two groups; dopamine receptor antagonists such as promazine, fluphenazine etc. and serotonin-dopamine antagonists including risperidone, olanzapine, ziprasidone, aripiprazole etc.

Materials and Methods:

Electrochemical methods have been used for the determination of antipsychotic agent just as used in the determination of many drug agents. Nearly all of the antipsychotics are electroactive and can be analyzed by electrochemical methods. Electroanalytical methods offer generally high sensitivity, are compatible with modern techniques, have low cost, low requirements, and compact design. Among the most commonly used types, there are cyclic voltammetry, differential pulse voltammetry, square wave voltammetry and linear sweep voltammetry.

Conclusion:

The aim of this review is to evaluate the main line and the advantages and uses of electroanalytical methods that employed for the determination of antipsychotic medication agents used in schizophrenia. Moreover, applications of the methods to pharmaceutical analysis of Antipsychotics upto- date is also summarized in a table.