Free-standing, welded mesoporous carbon nanofibers as anode for high-rate performance Li-ion batteries

A Sequential Electrospinning of a Coaxial and Blending Process for Creating Double-Layer Hybrid Films to Sense Glucose

This study presents a glucose biosensor based on electrospun core-sheath nanofibers. Two types of film were fabricated using different electrospinning procedures. Film F1 was composed solely of core-sheath nanofibers fabricated using a modified coaxial electrospinning process. Film F2 was a double-layer hybrid film fabricated through a sequential electrospinning and blending process. The bottom layer of F2 comprised core-sheath nanofibers fabricated using a modified process, in which pure polymethacrylate type A (Eudragit L100) was used as the core section and water-soluble lignin (WSL) and phenol were loaded as the sheath section. The top layer of F2 contained glucose oxidase (GOx) and gold nanoparticles, which were distributed throughout the polyvinylpyrrolidone K90 (PVP K90) nanofibers through a single-fluid blending electrospinning process. The study investigated the sequential electrospinning process in detail. The experimental results demonstrated that the F2 hybrid film had a higher degradation efficiency of β-D-glucose than F1, reaching a maximum of over 70% after 12 h within the concentration range of 10-40 mmol/L. The hybrid film F2 is used for colorimetric sensing of β-D-glucose in the range of 1-15 mmol/L. The solution exhibited a color that deepened gradually with an increase in β-D-glucose concentration. Electrospinning is flexible in creating structures for bio-cascade reactions, and the double-layer hybrid film can provide a simple template for developing other sensing nanomaterials.

Electrospun Nanofiber Electrodes for Lithium-Ion Batteries

Electrospun nanofiber materials have the advantages of good continuity, large specific surface areas, and high structural tunability, which provide many desirable characteristics for lithium-ion battery electrodes. Here, the principles and advantages of electrospinning technology are first elaborated, then the previous studies on high-performance nanofibrous electrode materials prepared by electrospinning technology are comprehensively summarized, and the correlation between 1D nanostructured materials and electrode performances is discussed. Finally, the remaining challenges of nanofibrous electrodes are proposed and some future study directions of this particular area are pointed out. This review provides new enlightenment for the design of nanofibrous electrodes toward high-performance lithium-ion batteries.

Passively mode-locked thulium-doped fiber laser based on saturable absorption of carbon nanofibers

As a new type of carbon-based material, carbon nanofibers (CNFs) have attracted much attention due to their unique physical structure and optical properties. In this paper, we propose the application of CNFs as the saturable absorber (SA) and established a passively mode-locked thulium-doped fiber laser (TDFL) for verification. By mixing sodium carboxymethyl cellulose solution with CNFs, CNF SA was prepared, the nonlinearity of which was tested as follows: the modulation depth was ∼1.3%, and the saturation intensity was 18MW/cm². By inserting the CNF SA into the TDFL ring cavity, mode-locked laser pulses of a central wavelength of 1954.47 nm and a 3 dB bandwidth of 5.93 nm were obtained. The spectral pulse width was 1.31 ps; the repetition frequency was 32.68 MHz; and the signal-to-noise ratio (SNR) was calculated to be ∼57dB. To our knowledge, this is the first time that CNFs have been reported as SAs for mode-locked lasers in the 2 µm wavelength region. Our work provides a new reference for using carbon-based materials in the realization of ultrafast lasers, and the proposed CNFs are highly advantageous in the development of ultrahigh-speed optical modulators and next-generation high-performance nonlinear photonic devices.

Responsive Nanofibers with Embedded Hierarchical Lipid Self-Assemblies

We introduce the design and study of a hybrid electrospun membrane with a dedicated nanoscale structural hierarchy for controlled functions in the biomedical domain. The hybrid system comprises submicrometer-sized internally self-assembled lipid nanoparticles (ISAsomes or mesosomes) embedded into the electrospun membrane with a nanofibrous polymer network. The internal structure of ISAsomes, studied by small-angle X-ray scattering (SAXS) and electron microscopy, demonstrated a spontaneous response to variations in the environmental conditions as they undergo a bicontinuous inverse cubic phase (cubosomes) in solution to a crystalline lamellar phase in the polymer membrane; nevertheless, this phase reorganization is reversible. As revealed by in situ SAXS measurements, if the membrane was put in contact with aqueous media, the cubic phase reappeared and submicrometer-sized cubosomes were released upon dissolution of the nanofibers. Furthermore, the hybrid membranes exhibited a specific anisotropic feature and morphological response under an external strain. While nanofibers were aligned under external strain in the microscale, the semicrystalline domains from the polymer phase were positioned perpendicular to the lamellae of the lipid phase in the nanoscale. The fabricated membranes and their spontaneous responses offer new strategies for the development of structure-controlled functions in electrospun nanofibers for biomedical applications, such as drug delivery or controlled interactions with biointerfaces.

A Review of Recent Advancements in Electrospun Anode Materials to Improve Rechargeable Lithium Battery Performance

Although lithium-ion batteries have already had a considerable impact on making our lives smarter, healthier, and cleaner by powering smartphones, wearable devices, and electric vehicles, demands for significant improvement in battery performance have grown with the continuous development of electronic devices. Developing novel anode materials offers one of the most promising routes to meet these demands and to resolve issues present in existing graphite anodes, such as a low theoretical capacity and poor rate capabilities. Significant improvements over current commercial batteries have been identified using the electrospinning process, owing to a simple processing technique and a wide variety of electrospinnable materials. It is important to understand previous work on nanofiber anode materials to establish strategies that encourage the implementation of current technological developments into commercial lithium-ion battery production, and to advance the design of novel nanofiber anode materials that will be used in the next-generation of batteries. This review identifies previous research into electrospun nanofiber anode materials based on the type of electrochemical reactions present and provides insights that can be used to improve conventional lithium-ion battery performances and to pioneer novel manufacturing routes that can successfully produce the next generation of batteries.

Key issues facing electrospun carbon nanofibers in energy applications: on-going approaches and challenges

Electrospun carbon nanofibers (CNFs), with one-dimensional (1D) morphology, tunable size, mechanical flexibility, and functionalities by themselves and those that can be added onto them, have witnessed the intensive development and extensive applications in energy storage and conversion, such as supercapacitors, batteries, and fuel cells. However, conventional solid CNFs often suffer from a rather poor electrical conductivity and low specific surface area, compared with the graphene and carbon nanotube counterparts. A well-engineered porous structure in CNFs increases their surface areas and reactivity, but there is a delicate balance between the level and type of pores and mechanical robustness. In addition, CNFs by themselves often show unsatisfactory electrochemical performance in energy storage and conversion, where, to endow them with high and durable activity, one effective approach is to dope CNFs with certain heteroatoms. Up to now, various activation strategies have been proposed and some of them have demonstrated great success in addressing these key issues. In this review, we focus on the recent advances in the issue-oriented schemes for activating the electrospun CNFs in terms of enhancing the conductivity, modulating pore configuration, doping with heteroatoms, and reinforcing mechanical strength, in close reference to their applications in supercapacitors. The basic scientific principles involved in these activation processes and their effectiveness in boosting the electrochemical performance of CNFs are examined. Finally, some of the on-going challenges and future perspectives in engineering CNFs for better performance are highlighted.

Effect of the Interfiber Bonding on the Mechanical Behavior of Electrospun Fibrous Mats

Electrospun fibrous mats, characterized by their large surface-to-volume ratios, have unique and beneficial properties for various applications. The micro or nanoscale architectures of these structures significantly affects the mechanical properties of the material. The lack of knowledge for predicting the mechanical behavior of electrospun fibrous mats may prevent applications utilizing the se mats from reaching their full potential. In this paper, we propose a new computational model to predict the mechanical behavior of an electrospun fibrous mat by considering its microstructure and the percentage of the cross-points that are bonded. The model of the electrospun mat with randomly distributed fibers is considered in uniaxial and biaxial tension. Three cases are studied: (1) no interaction in cross-points of intersecting fibers, (2) half of the cross-points are bonded, (3) all of the cross-points are bonded. The results show that along with the mechanical properties of individual fibers, the fusion bonding of fibers is a critical parameter for tuning the mechanical properties of the bulk material. In a predefined porosity, the interfiber fusion enhanced the stiffness of the mat by 60%, which is independent of the loading mode and the mechanical property of individual fibers. For all ranges of porosities, bonding increases the stiffness of the mat; however, the bonding is more effective at stiffening when the porosity of the mat is low.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Electrically-Conductive Sub-Micron Carbon Particles from Lignin: Elucidation of Nanostructure and Use as Filler in Cellulose Nanopapers

Carbon particles were produced from kraft lignin through carbonization of perfectly spherical, sub-micron beads obtained by aerosol flow. The structure of the resulting carbon particles was elucidated and compared to that derived from commercially available technical lignin powder, which is undefined in geometry. In addition to the smaller diameters of the lignin beads (<1 µm) compared to those of the lignin powder (100 µm), the former displayed a slightly higher structural order as revealed by X-ray diffraction and Raman spectroscopy. With regard to potential application in composite structures, the sub-micron carbon beads were clearly advantageous as a filler of cellulose nanopapers, which displayed better mechanical performance but with limited electrical conductivity. Compression sensing was achieved for this nanocomposite system.