Electrochemical determination of 2-isopropoxyphenol in glassy carbon and molecularly imprinted poly-pyrrole electrodes

Determination of ribavirin by molecularly imprinted electrochemical sensors using pyrro-1-propionyl-alaninoyl-chitooligosaccharide and pyrrole as bifunctional monomers on Prussian blue-gold nanocomposite films

Herein, we developed a highly sensitive imprinted electrochemical sensor for the trace detection of ribavirin (RBV) using pyrrole (PYR) and pyrro-1-propionyl-alaninoyl-chitooligosaccharides (PPACO) as bifunctional monomers on Prussian blue-gold nanocomposite films. PPACO had strong molecular effect on RBV molecule and was selected by quantitative calculations. After the deposition of the Prussian blue-gold nanocomposite on a glassy carbon electrode (GCE) surface, a 4-aminothiophenol layer successfully self-assembled on the surface. Subsequently, the molecularly imprinted membrane (MIM) was subjected to electrochemical polymerization on the electrode surface using RBV as the template and PPACO and PYR as the two monomers. After eluting the RBV molecules from the MIM, the fabricated RBV-MIM/Fn-Au-PB/GCE exhibited the specific adsorption of RBV. Under optimal conditions, differential pulse voltammetry (DPV) was used to measure the performance of the synthesized sensor, which exhibited a linear relationship between the decreasing peak current and RBV concentration from 0.015 to 3.5 μM with a low detection limit of 3 nM (S/N = 3). As a proof of concept, RBV-MIM/Fn-Au-PB/GCE was also applied to monitor the RBV content in RBV granules. It showed a satisfactory recovery (96.5-99.2%) with a relative standard deviation of less than 3.5% (n = 5), and thus, we believe it has potential for practical applications.

A sensitive sensor based on molecularly imprinted polypyrrole on reduced graphene oxide modified glassy carbon electrode for nevirapine analysis

A molecularly imprinted polymer (MIP) sensor was offered for nevirapine (NVP) analysis based on the electropolymerization of pyrrole (Py) on electrochemically reduced graphene oxide (ErGO) immobilized on a glassy carbon electrode (GCE). Electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and atomic force microscope (AFM) were applied to characterize the proposed sensor (MIP/ErGO/GCE). The electrochemical operation of this sensor for NVP analysis was tested using differential pulse voltammetry (DPV) and cyclic voltammetry (CV) methods in an alkaline medium. The prepared MIP/ErGO/GCE exhibited better analytical performance than other modified electrodes toward NVP detection. The offered sensor depicted a linearity range between 0.005 µM and 400 µM with a limit of detection (LOD) of 2 nM under optimal conditions. Notably, the offered sensor illustrated excellent selectivity, good reproducibility, acceptable repeatability, and reliable long-term performance. These experiments depicted the constructed sensor as a favorable and good sensing element towards NVP monitoring in pharmaceutical and serum samples.

A Review on Molecularly Imprinted Polymers Preparation by Computational Simulation-Aided Methods

Molecularly imprinted polymers (MIPs) are obtained by initiating the polymerization of functional monomers surrounding a template molecule in the presence of crosslinkers and porogens. The best adsorption performance can be achieved by optimizing the polymerization conditions, but this process is time consuming and labor-intensive. Theoretical calculation based on calculation simulations and intermolecular forces is an effective method to solve this problem because it is convenient, versatile, environmentally friendly, and inexpensive. In this article, computational simulation modeling methods are introduced, and the theoretical optimization methods of various molecular simulation calculation software for preparing molecularly imprinted polymers are proposed. The progress in research on and application of molecularly imprinted polymers prepared by computational simulations and computational software in the past two decades are reviewed. Computer molecular simulation methods, including molecular mechanics, molecular dynamics and quantum mechanics, are universally applicable for the MIP-based materials. Furthermore, the new role of computational simulation in the future development of molecular imprinting technology is explored.

Electropolymerised Polypyrroles as Active Layers for Molecularly Imprinted Sensors: Fabrication and Applications

Conjugated polymers are widely used in the development of sensors, but even though they are sensitive and robust, they typically show limited selectivity, being cross-sensitive to many substances. In turn, molecular imprinting is a method involving modification of the microstructure of the surface to incorporate cavities, whose shape matches that of the “template”—the analyte to be detected, resulting in high selectivity. The primary goal of this review is to report on and briefly explain the most relevant recent developments related to sensors utilising molecularly imprinted polypyrrole layers and their applications, particularly regarding the detection of bioactive substances. The key approaches to depositing such layers and the most relevant types of analytes are highlighted, and the various trends in the development of this type of sensors are explored.

Sensitive electrochemical sensing platform for selective determination of dopamine based on amorphous cobalt hydroxide/polyaniline nanofibers composites

In this study, amorphous cobalt hydroxide/polyaniline nanofibers (Co(OH)₂/PANINF) composites were successfully prepared. The formation of amorphous Co(OH)₂ with irregular surface structure was confirmed by x-ray diffraction, scanning electron microscopy, and selected-area electron diffraction. The non-enzymatic electrochemical sensor for the selective and sensitive determination of dopamine (DA) has been constructed by using Co(OH)₂/PANINF composites modified glassy carbon electrode (Co(OH)₂/PANINF/GCE), which exhibited excellent electrocatalytic activity toward DA, in a large part owing to the advantages of large surface area of amorphous Co(OH)₂ and the synergetic effect between Co(OH)₂ and PANINF. The electrochemical kinetics reveal that the DA oxidation involves two electrons and two protons in a quasi-reversible electrode reaction. Differential pulse voltammetry (DPV) studies show remarkable sensing performance for the determination of DA, with a low detection limit of 0.03 μM, and a wide linear range from 0.1 to 200 μM. From a broader perspective, the present study demonstrates that Co(OH)₂/PANINF composites would be promising supporting materials for novel sensing platforms.

Molecularly imprinted graphite spray ionization-ion mobility spectrometry: application to trace analysis of the pesticide propoxur

A porous graphite sheet modified by a molecularly imprinted polymer (MIP) was directly used as the spray ionization source for ion mobility spectrometry (IMS). Therefore, it was possible to selectively analyze samples extracted by the molecularly imprinted polymer. This obviates the need for the steps of elution, solvent evaporation, dissolution and injection. To prepare the sheet, the graphite surface was first modified by electrodeposition of a molecularly imprinted polypyrrole film. This polypyrrole film was fabricated in a three-electrode electrochemical system using cyclic voltammetry. The electropolymerization of the graphite sheet was carried out with LiClO₄ as a supporting electrolyte in the reaction solution. The effects of the amount of monomer, the level of template concentrations, and the time of polymerization on the extraction efficiency of the MIP film were evaluated. The extraction conditions including extraction time, the extraction temperature, the pH values, the salt concentrations, and the stirring rate were also studied. Methanol was selected as the most suitable solvent for both desorption and ionization which occur simultaneously. The pesticide propoxur (acting as a test compound) was extracted from water samples and directly analyzed using IMS. The analytical parameters (working range: 1.0 to 250 ng·mL^-1; detection limit: 0.3 ng·mL^-1) indicated that the direct coupling of MIP and IMS has a great potential in terms of reproducibility, and speed of the analysis, while maintaining acceptable sensitivity. Graphical abstract Schematic presentation of molecularly imprinted graphite spray ionization coupled with ion mobility spectrometry (IMS) for rapid/selective extraction and ionization: Application to the pre-concentration of propoxur prior to its quantification by IMS.