A novel gas-phase mono and bimetallic clusters decorated Zno nanorods electrochemical sensor for 4-aminophenol detection

Automated System for Attomolar-Level Detection of MiRNA as a Biomarker for Influenza A Virus

We have developed an automated sensing system for the repeated detection of a specific microRNA (miRNA) of the influenza A (H1N1) virus. In this work, magnetic particles functionalized with DNAs, target miRNAs, and alkaline phosphate (ALP) enzymes formed sandwich structures. These particles were trapped on nickel (Ni) patterns of our sensor chip by an external magnetic field. Then, additional electrical signals from electrochemical markers generated by ALP enzymes were measured using the sensor, enabling the highly sensitive detection of target miRNA. The magnetic particles used on the sensor were easily removed by applying the opposite direction of external magnetic fields, which allowed us to repeat sensing measurements. As a proof of concept, we demonstrated the detection of miRNA-1254, one of the biomarkers for the H1N1 virus, with a high sensitivity down to 1 aM in real time. Moreover, our sensor could selectively detect the target from other miRNA samples. Importantly, our sensor chip showed reliable electrical signals even after six repeated miRNA sensing measurements. Furthermore, we achieved technical advances to utilize our sensor platform as part of an automated sensing system. In this regard, our reusable sensing platform could be utilized for versatile applications in the field of miRNA detection and basic research.

State-of-art advances on removal, degradation and electrochemical monitoring of 4-aminophenol pollutants in real samples: A review

p_Aminophenol, namely 4-aminophenol (4-AP), is an aromatic compound including hydroxyl and amino groups contiguous together on the benzene ring, which are suitable chemically reactive, amphoteric, and alleviating agents in nature. Amino phenols are appropriate precursors for synthesizing oxazoles and oxazines. However, since the toxicity of aniline and phenol can harm human and herbal organs, it is essential to improve a reliable technique for the determination of even a trace amount of amino phenols, as well as elimination or (bio)degradation/photodegradation of it to protect both the environment and people's health. For this purpose, various analytical methods have been suggested up till now, including spectrophotometry, liquid chromatography, spectrofluorometric and capillary electrophoresis, etc. However, some drawbacks such as the requirement of complex instruments, high costs, not being portable, slow response time, low sensitivity, etc. prevent them to be employed in a wide range and swift in-situ applications. In this regard, besides the efforts such as (bio)degradation/photodegradation or removal of 4-AP pollutants from real samples, electroanalytical techniques have become a promising alternative for monitoring them with high sensitivity. In this review, it was aimed to emphasize and summarize the recent advances, challenges, and opportunities for removal, degradation, and electrochemical sensing 4-AP in real samples. Electroanalytical monitoring of amino phenols was reviewed in detail and explored the various types of electrochemical sensors applied for detecting and monitoring in real samples. Furthermore, the various technique of removal and degradation of 4-AP in industrial and urban wastes were also deliberated. Moreover, deep criticism of multifunctional nanomaterials to be utilized as a catalyst, adsorbent/biosorbent, and electroactive material for the fabrication of electrochemical sensors was covered along with their unique properties. Future perspectives and conclusions were also criticized to pave the way for further studies in the field of application of up-and-coming nanostructures in environmental applications.

Dual functionality of surface plasmon resonance and barrier layer on the photosensing and optical nonlinearity of ZnO nanorod arrays

The dual functionality of plasmonic light harvesting and barrier spacing between Au nanoparticles (NPs) and ZnO nanorod arrays (NRsA) are spotlighted to investigate their impact on the photoconversion and optical nonlinearity in the present study. The passivating Al₂O₃ barrier layer permits high-energy hot electron tunneling and injection from Au to the ZnO NRsA. The structural, vibrational, morphological/elemental, and optical properties of ZnO NRsA/a-Al₂O₃/Au were characterized by X-ray diffraction (XRD), Raman scattering, field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FE-SEM/EDX), and ultraviolet-visible-near IR (UV-Vis-near IR) absorption, respectively. The optoelectronic and nonlinear optical properties were analyzed by current-voltage measurement and z-scan tests under red laser (655 nm) irradiation, respectively. To highlight the effect of surface plasmon charge transport-based photosensing and photo-harvesting, the irradiated light source is selected to have a photon energy lower than the ZnO bandgap energy and detuning from LSPR. The transfer of photo-induced hot electrons from the Au NPs localized surface plasmon resonance (LSPR) to the ZnO NRsA translates into photocurrent generation in photosensing performance. The reverse saturable absorption process is changed to saturable absorption after intercalating the Al₂O₃ spacing layer into the ZnO NRsA/Au interface. The typical values of the nonlinear refraction index and absorption coefficient are calculated as n₂ = +2.38 × 10^-5 cm² W^-1 and β = -0.17 cm W^-1 for the sandwiched ZnO NRsA/Al₂O₃/Au heterostructure, respectively. The sandwiched ZnO NRsA/amorphous Al₂O₃/Au heterostructure exhibits strong nonresonant optical nonlinearity, which has an excellent figure of merit for optical switching.

Reusable surface amplified nanobiosensor for the sub PFU/mL level detection of airborne virus

We developed a reusable surface-amplified nanobiosensor for monitoring airborne viruses with a sub-PFU/mL level detection limit. Here, sandwich structures consisted of magnetic particles functionalized with antibodies, target viruses, and alkaline phosphatases (ALPs) were formed, and they were magnetically concentrated on Ni patterns near an electrochemical sensor transducer. Then, the electrical signals from electrochemical markers generated by ALPs were measured with the sensor transducer, enabling highly-sensitive virus detection. The sandwich structures in the used sensor chip could be removed by applying an external magnetic field, and we could reuse the sensor transducer chip. As a proof of concepts, the repeated detection of airborne influenza virus using a single sensor chip was demonstrated with a detection limit down to a sub-PFU/mL level. Using a single reusable sensor transducer chip, the hemagglutinin (HA) of influenza A (H1N1) virus with different concentrations were measured down to 10 aM level. Importantly, our sensor chip exhibited reliable sensing signals even after more than 18 times of the repeated HA sensing measurements. Furthermore, airborne influenza viruses collected from the air could be measured down to 0.01 PFU/mL level. Interestingly, the detailed quantitative analysis of the measurement results revealed the degradation of HA proteins on the viruses after the air exposure. Considering the ultrasensitivity and reusability of our sensors, it can provide a powerful tool to help preventing epidemics by airborne pathogens in the future.

Free carrier enhanced depletion in ZnO nanorods decorated with bimetallic AuPt nanoclusters

The decoration of semiconductor nanostructures with small metallic clusters usually leads to an improvement of their properties in sensing or catalysis. Bimetallic cluster decoration typically is claimed to be even more effective. Here, we report a detailed investigation of the effects of Au, Pt or AuPt nanocluster decoration of ZnO nanorods on charge transport, photoluminescence and UV sensitivity. ZnO nanorods were synthesized by chemical bath deposition while decoration with small nanoclusters (2-3 nm in size) was achieved by a laser-ablation based cluster beam deposition technology. The structural properties were investigated by scanning electron microscopy, high resolution transmission electron microscopy, X-ray photoelectron spectroscopy and Rutherford backscattering spectrometry, and the optoelectronic properties by current-voltage and photoluminescence measurements. The extent of band bending at the cluster-ZnO interface was quantitatively modeled through numerical simulations. The decoration of ZnO nanorods with monometallic Au or Pt nanoclusters causes a significant depletion of free electrons below the surface, leading to a reduction of UV photoluminescence, an increase of ZnO nanorod dark resistance (up to 200 times) and, as a consequence, an improved sensitivity (up to 6 times) to UV light. These effects are strongly enhanced (up to 450 and 10 times, respectively) when ZnO nanorods are decorated with bimetallic AuPt nanoclusters that substantially augment the depletion of free carriers likely due to a more efficient absorption of the gas molecules on the surface of the bimetallic AuPt nanoclusters than on that of their monometallic counterparts. The depletion of free carriers in cluster decorated ZnO nanorods is quantitatively investigated and modelled, allowing the application of these composite materials in UV sensing and light induced catalysis.

A sensitive sensor based on MOFs derived nanoporous carbons for electrochemical detection of 4-aminophenol

A novel electrochemical sensor based on zinc oxide/nitrogen doped porous carbons (ZnO/NPC) modified electrode has been constructed for detecting 4-aminophenol (4-AP). The ZnO/NPC material was synthesized by one-step carbonization of MOF-5-NH₂. The modified glassy carbon electrode (ZnO/NPC/GCE) holds excellent electrocatalytic activity toward 4-AP, with a sensitivity of about 31.02 μA/μM/cm². Under optimal conditions, its oxidation peak current increases linearly with the increasing concentration of 4-AP (from 5 to 120 μmol/L), and the detection limits is 0.014 μmol/L (S/N = 3). Furthermore, favorable selectivity, superior reproducibility and outstanding stability have been achieved. The ZnO/NPC/GCE has been applied in detecting 4-AP in industrial waste water and achieved positive results with the recovery of 4-AP ranging from 94.02% to 107.7%, which confirms that this sensor is a reliable platform for the detection of 4-AP in waste water.

A Facile In-Situ Development of L-Valine Film onto the Surface of Carbon Paste Electrode Towards the Detection of Environmentally Hazardous 4-Amino Phenol

A small scale of environmentally hazardous 4-aminophenol can show significant impact on human health. Hence, in the present work, we have designed L-Valine film (Vf) modified carbon paste electrode (Vf/CPE) for the determination of 4-aminophenol. Herein, a facile in-situ L-Valine film was developed by electrochemical polymerization method onto the surface of bare carbon paste electrode (BCPE) with the help of cyclic voltammetry (CV) technique. A two-folds of electrochemical peak current enhancement was achieved at Vf/CPE in comparison with BCPE towards the determination of 4-aminophenol in optimum pH 7.0 of phosphate buffer solution (PBS). This was achieved due to the large surface area and conductive nature of Vf/CPE, which was concluded through the techniques of cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The effect of pH of buffer and scan rate studies were successfully studied. Morphological changes of BCPE and Vf/CPE was studied with the help of scanning electron microscopy (SEM). The formation of Vf on CPE was also analyzed by Fourier transform infrared (FTIR) spectra. Under the optimized conditions, the limit of detection (LOD) and limit of quantification (LOQ) values of 4-aminophenol were estimated with the aid of chronoamperometry (CA) technique and was found to be 9.8 μM and 32 μM, respectively. Finally the proposed method was found to have satisfactory repeatability, reproducibility and stability results with low relative standard deviation (RSD) values.