Black phosphorene modified glassy carbon electrode for the sensitive voltammetric detection of rutin

C-GCS@ZIF-F/PL based electrochemical sensor for rapid and ultra-sensitive detection of rutin in foods

Herein, a stable and ultra-sensitive rutin electrochemical sensor was successfully developed. This sensor based on glassy carbon electrode (GCE) modified with C-GCS@ZIF-F/PL nanocomposite, which was made of thermally carbonized glucose (GCS) doped with flower-like ZIF (ZIF-F) and pencil lead (PL). The electrochemical response of rutin was considerably significant at C-GCS@ZIF-F/PL/GCE, demonstrating favorable conductivity and electrocatalytic properties for detection of rutin. Under optimal conditions, the linear range is 0.1-100 μM, with a low detection limit (LOD) of 0.0054 μM. It also exhibits excellent stability, reproducibility, as well as selectivity over common interfering ions such as Na+, uric acid, quercetin and riboflavin, etc. Meanwhile, the practical utility of developed sensor was evaluated in food samples including honey, orange, and buckwheat tea, achieving satisfactory recovery rates ranging from 98.2% to 101.7%. This paper introduces a novel technique for the detection of rutin in foods.

2D/2D heterostructure Ni-Fe LDH/black phosphorus nanosheets with AuNP for noxious substance diphenylamine detection in food samples

In this study, gold nanoparticles decorated on nickel-iron layered double hydroxide with black phosphorus nanosheets (AuNP/Ni-Fe LDH/BPNSs) composite were prepared using a stirring method. Analyte tracing is required for developing viable sensors. The AuNP/Ni-Fe LDH/BPNSs composite exhibited a large specific surface area, high conductivity, high electrocatalytic activity, and rapid electron transfer. These properties play a vital role in monitoring diphenylamine (DPA) in food samples. The formation of the AuNP/Ni-Fe LDH/BPNSs composite was confirmed using various structural and morphological characterization techniques. The electroanalytical character of the AuNP/Ni-Fe LDH/BPNSs composite was evaluated using voltammetry. Interestingly, the AuNP/Ni-Fe LDH/BPNSs showed a wide linear range of 0.0125-1003.82 μM and a detection limit of 4.63 nM with a sensitivity of 0.399 µA µM-1 cm-2. The constructed sensor shows considerable selectivity, stability, repeatability, and reproducibility, and the practicability of DPA was monitored in the apples, sweet tomatoes, pears, and grapes with satisfactory recoveries.

Electrochemistry of Flavonoids: A Comprehensive Review

Flavonoids represent a large group of aromatic amino acids that are extensively disseminated in plants. More than six thousand different flavonoids have been isolated and identified. They are important components of the human diet, presenting a broad spectrum of health benefits, including antibacterial, antiviral, antimicrobial, antineoplastic, anti-mutagenic, anti-inflammatory, anti-allergic, immunomodulatory, vasodilatory and cardioprotective properties. They are now considered indispensable compounds in the healthcare, food, pharmaceutical, cosmetic and biotechnology industries. All flavonoids are electroactive, and a relationship between their electron-transfer properties and radical-scavenging activity has been highlighted. This review seeks to provide a comprehensive overview concerning the electron-transfer reactions in flavonoids, from the point of view of their in-vitro antioxidant mode of action. Flavonoid redox behavior is related to the oxidation of the phenolic hydroxy groups present in their structures. The fundamental principles concerning the redox behavior of flavonoids will be described, and the phenol moiety oxidation pathways and the effect of substituents and experimental conditions on flavonoid electrochemical behavior will be discussed. The final sections will focus on the electroanalysis of flavonoids in natural products and their identification in highly complex matrixes, such as fruits, vegetables, beverages, food supplements, pharmaceutical compounds and human body fluids, relevant for food quality control, nutrition, and healthcare research.

Preparation of electrochemical horseradish peroxidase biosensor with black phosphorene-zinc oxide nanocomposite and their applications

In this work, a novel and sensitive electrochemical biosensor was constructed based on a black phosphorene (BP) and nanosized zinc oxide (ZnO@BP) nanocomposite as a modifier, which was used for the immobilization of horseradish peroxidase (HRP) on a carbon ionic liquid electrode (CILE). The ZnO@BP nanocomposite was synthesized by a simple in situ hydrothermal method with stripped black phosphorus nanoplates and ZnO. The ZnO@BP and HRP-modified electrode was developed by a casting method. ZnO@BP with highly conductivity, large surface area and good biocompatibility could maintain the bioactivity of HRP and accelerate the electron transfer rate. Cyclic voltammetry was used to study the direct electrochemistry of HRP on the Nafion/HRP/ZnO@BP/CILE with the appearance of a pair of distinct redox peaks. The constructed electrochemical HRP biosensor exhibited excellent electrocatalytic effects on the reduction of trichloroacetic acid and sodium nitrite. Real samples were detected with satisfactory results, which demonstrated the potential applications of this electrochemical HRP biosensor.

Electrochemical Biosensor Based on Horseradish Peroxidase and Black Phosphorene Quantum Dot Modified Electrode

Black phosphorene quantum dots (BPQDs) were prepared by ultrasonic-assisted liquid-phase exfoliation and centrifugation with morphologies proved by TEM results. Furthermore, an electrochemical enzyme sensor was prepared by co-modification of BPQDs with horseradish peroxidase (HRP) on the surface of a carbon ionic liquid electrode (CILE) for the first time. The direct electrochemical behavior of HRP was studied with a pair of well-shaped voltammetric peaks that appeared, indicating that the existence of BPQDs was beneficial to accelerate the electron transfer rate between HRP and the electrode surface. This was due to the excellent properties of BPQDs, such as small particle size, high interfacial reaction activity, fast conductivity, and good biocompatibility. The presence of BPQDs on the electrode surface provided a fast channel for direct electron transfer of HRP. Therefore, the constructed electrochemical HRP biosensor was firstly used to investigate the electrocatalytic behavior of trichloroacetic acid (TCA) and potassium bromate (KBrO3), and the wide linear detection ranges of TCA and KBrO3 were 4.0-600.0 mmol/L and 2.0-57.0 mmol/L, respectively. The modified electrode was applied to the actual samples detection with satisfactory results.

Ultrasensitive Electrochemical Aptasensing of Malathion Based on Hydroxylated Black Phosphorus/Poly-L-Lysine Composite

A highly sensitive unlabeled electrochemical aptasensor based on hydroxylated black phosphorus/poly-L-lysine (hBP/PLL) composite is introduced herein for the detection of malathion. Poly-L-lysine (PLL) with adhesion and coating properties adhere to the surface of the nanosheets by noncovalent interactions with underlying hydroxylated black phosphorus nanosheets (hBP) to produce the hBP/PLL composite. The as-synthesized hBP/PLL composite bonded to Au nanoparticles (Au NPs) firmly by assembling and using them as a substrate for the aptamer with high specificity as a probe to fabricate the sensor. Under optimal conditions, the linear range of the electrochemical aptasensor was 0.1 pM~1 μM, and the detection limit was 2.805 fM. The electrochemical aptasensor has great selectivity, a low detection limit, and anti-interference, which has potential application prospects in the field of rapid trace detection of pesticide residues.

Portable Wireless Intelligent Electrochemical Sensor for the Ultrasensitive Detection of Rutin Using Functionalized Black Phosphorene Nanocomposite

To build a portable and sensitive method for monitoring the concentration of the flavonoid rutin, a new electrochemical sensing procedure was established. By using nitrogen-doped carbonized polymer dots (N-CPDs) anchoring few-layer black phosphorene (N-CPDs@FLBP) 0D-2D heterostructure and gold nanoparticles (AuNPs) as the modifiers, a carbon ionic liquid electrode and a screen-printed electrode (SPE) were used as the substrate electrodes to construct a conventional electrochemical sensor and a portable wireless intelligent electrochemical sensor, respectively. The electrochemical behavior of rutin on the fabricated electrochemical sensors was explored in detail, with the analytical performances investigated. Due to the electroactive groups of rutin, and the specific π-π stacking and cation-π interaction between the nanocomposite with rutin, the electrochemical responses of rutin were greatly enhanced on the AuNPs/N-CPDs@FLBP-modified electrodes. Under the optimal conditions, ultra-sensitive detection of rutin could be realized on AuNPs/N-CPDs@FLBP/SPE with the detection range of 1.0 nmol L^-1 to 220.0 μmol L^-1 and the detection limit of 0.33 nmol L^-1 (S/N = 3). Finally, two kinds of sensors were applied to test the real samples with satisfactory results.

In-situ growth of nitrogen-doped carbonized polymer dots on black phosphorus for electrochemical DNA biosensor of Escherichia coli O157: H7

Sensitive and accurate detection technology for pathogenic bacteria is of great social and economic significance in foodborne disease and food safety. In this paper, a novel portable electrochemical DNA biosensor for the detection of specific DNA sequence of Escherichia coli (E. coli) O157: H7 was constructed. To enhance the performance of the electrochemical sensor, a functionalized nitrogen-doped carbonized polymer dots in-situ grown on few-layer black phosphorus (N-CPDs@FLBP) was synthesized and used as the modifier on the surface of screen-printed electrode. Combining gold nanoparticles as immobilization matrix and methylene blue as electrochemical indicator, the analytical performance of this electrochemical DNA biosensor was evaluated using standard complementary ssDNA sequence in the linear concentration range from 1.0 × 10^-19 to 1.0 × 10^-6 mol/L with a low detection limit as 3.33 × 10^-20 mol/L (3 σ). Furthermore, the portable electrochemical DNA biosensor was proposed based on polymerase chain reaction amplification for the detection of the E. coli O157: H7 genomic DNA from chicken meat, which verified the feasibility for practical samples detection. The research has great theoretical and practical significance for the development of electrochemical biosensor of pathogenic bacteria.

A Comprehensive Review on the Electrochemical Sensing of Flavonoids

Flavonoids are bioactive polyphenolic compounds, widespread in the plant kingdom. Flavonoids possess broad-spectrum pharmacological effects due to their antioxidant, anti-tumor, anti-neoplastic, anti-mutagenic, anti-microbial, anti-inflammatory, anti-allergic, immunomodulatory, and vasodilatory properties. Care must be taken, since excessive consumption of flavonoids may have adverse effects. Therefore, proper identification, quantification and quality evaluations of flavonoids in edible samples are necessary. Electroanalytical approaches have gained much interest for the analysis of redox behavior and quantification of different flavonoids. Compared to various conventional methods, electrochemical techniques for the analysis of flavonoids offer advantages of high sensitivity, selectivity, low cost, simplicity, biocompatibility, easy on-site evaluation, high accuracy, reproducibility, wide linearity of detection, and low detection limits. This review article focuses on the developments in electrochemical sensing of different flavonoids with emphasis on electrode modification strategies to boost the electrocatalytic activity and analytical efficiency.

Recent advances in black phosphorus-based electrochemical sensors: A review

Since the discovery of liquid-phase-exfoliated black phosphorus (BP) as a field-effect transistor in 2014, BP, with its 2D layered structure, has attracted significant attention, owing to its anisotropic electroconductivity, tunable direct bandgap, extraordinary surface activity, moderate switching ratio, high hole mobility, good biocompatibility, and biodegradability. Several pioneering research efforts have explored the application of BP in different types of electrochemical sensors. This review summarizes the latest synthesis methods, protection strategies, and electrochemical sensing applications of BP and its derivatives. The typical synthesis methods for BP-based crystals, nanosheets, and quantum dots are discussed in detail; the degradation of BP under ambient conditions is introduced; and state-of-the-art protection methodologies for enhancing BP stability are explored. Various electrochemical sensing applications, including chemically modified electrodes, electrochemiluminescence sensors, enzyme electrodes, electrochemical aptasensors, electrochemical immunosensors, and ion-selective electrodes are discussed in detail, along with the mechanisms of BP functionalization, sensing strategies, and sensing properties. Finally, the major challenges in this field are outlined and future research avenues for BP-based electrochemical sensors are highlighted.

Two-dimensional inorganic nanosheets: production and utility in the development of novel electrochemical (bio)sensors and gas-sensing applications

This review (with 178 references) focuses on inorganic layered materials (ILMs) and the use of their two-dimensional nanosheets in the development of novel electrochemical (bio)sensors, analytical devices, and gas-phase sensing applications. The text is organized in three main sections including the presentation of the most important families of ILMs, a comprehensive outline of various "bottom-up", "top-down," and hydro(solvo)thermal methods that have been used for the production of ILM nanosheets, and finally an evaluative survey on their utility for the determination of analytes with interest in different sectors of contemporary analysis. Critical discussion on the effect of the production method on their electronic properties, the suitability of each nanomaterial in different sensing technologies along with an assessment of the performance of the (bio)sensors and devices that have been proposed within the last 5 years, is enclosed. The perspectives of further improving the utility of 2D inorganic nanosheets in sensing applications, in real-world samples, are also discussed.

Voltammetric sensing performances of a carbon ionic liquid electrode modified with black phosphorene and hemin

A black phosphorene (BPE) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) hybrid was used for the immobilization of hemin on a carbon ionic liquid electrode (CILE). BPE inside the PEDOT:PSS film was stable without adverse effects of water and oxygen. The hemin-modified electrode facilitates electrochemical communication with a couple of well-shaped and enhanced redox waves. Therefore BPE exhibits an accelerating function to the electron movement. This sensor exhibits excellent electrocatalytic effects on the reduction of various substrates including trichloroacetic acid (TCA), nitrite and H₂O₂. As for TCA, the reduction current at -0.36 V (vs. Ag/AgCl) increases linearly in the concentration range from 2.0 to 180 mmol·L^-1 with a detection limit of 0.67 mmol·L^-1 (at 3σ). As for nitrite, the reduction current at -0.59 Vis linear in the 1.0 to 10.5 mmol·L^-1 concentration range, and the detection limit is 0.33 mmol·L^-1 (at 3σ). As for H₂O₂, the reduction current at -0.033 V (vs. Ag/AgCl) is linear in the concentration range from 4.0 to 35.0 mmol·L^-1 and the detection limit is 1.3 mmol·L^-1 (at 3σ). The real sample was analyzed with satisfactory results, which indicated that BPE had potential applications in the field of electrochemical biosensor. Graphical abstract Photos of (a) black phosphorene (BPE) solution, (b) poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), (c) BPE-PEDOT:PSS (1:5) dispersion, and the fabrication procedure of this electrochemical sensor. It was applied to the determination of trichloroacetic acid, nitrite and hydrogen peroxide.

Facile Electrochemical Sensor for Nanomolar Rutin Detection Based on Magnetite Nanoparticles and Reduced Graphene Oxide Decorated Electrode

A new electrochemical sensor for nanomolar rutin detection based on amine-functionalized Fe₃O₄ nanoparticles and electrochemically reduced graphene oxide nanocomposite modified glassy carbon electrode (NH₂-Fe₃O₄ NPs-ErGO/GCE) was fabricated through a simple method, and the X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and electrochemical technique were used to characterize the modified electrode. The electrochemical behavior of rutin on the Fe₃O₄ NPs-ErGO/GCE was studied in detail. The electrochemical response of rutin at this modified electrode was remarkably higher than that of the bare GCE or other modified GCE (GO/GCE, Fe₃O₄ NPs-GO/GCE, and ErGO/GCE). Under the optimum determination conditions, Fe₃O₄ NPs-ErGO/GCE provided rutin with a broader detection range of 6.0 nM–0.1 µM; 0.1–8.0 µM and 8.0–80 µM, a minimum detectable concentration of 4.0 nM was obtained after 210 s accumulation. This novel method was applied in determination of rutin in pharmaceutical tablets and urine samples with satisfactory results.