π-π nanoassembly of water-soluble metalloporphyrin of ZnTCPP on RGO/AuNPs/CS nanocomposites for photoelectrochemical sensing of hydroquinone

Ti3 C2 TX MXene Modified with ZnTCPP with Bacteria Capturing Capability and Enhanced Visible Light Photocatalytic Antibacterial Activity

Light-assisted antibacterial therapy is a promising alternative to antibiotic therapy due to the high antibacterial efficacy without bacterial resistance. Recent research has mainly focused on the use of near-infrared light irradiation to kill bacteria by taking advantage of the synergistic effects rendered by hyperthermia and radical oxygen species. However, photocatalytic antibacterial therapy excited by visible light is more convenient and practical, especially for wounds. Herein, a visible light responsive organic-inorganic hybrid of ZnTCPP/Ti₃ C₂ T_X is designed and fabricated to treat bacterial infection with antibacterial efficiency of 99.86% and 99.92% within 10 min against Staphylococcus aureus and Escherichia coli, respectively. The porphyrin-metal complex, ZnTCPP, is assembled on the surface of Ti₃ C₂ T_X MXene to capture bacteria electrostatically and the Schottky junction formed between Ti₃ C₂ T_X and ZnTCPP promotes visible light utilization, accelerates charge separation, and enhances the mobility of photogenerated charges, and finally increases the photocatalytic activity. As a result of the excellent bacteria capturing ability and photocatalytic antibacterial effects, ZnTCPP/Ti₃ C₂ T_X exposed to visible light has excellent antibacterial properties in vitro and in vivo. Therefore, organic-inorganic materials that have been demonstrated to possess good biocompatibility and enhance wound healing have large potential in bio-photocatalysis, antibacterial therapy, as well as antibiotics-free treatment of wounds.

TiO2 nanotube arrays decorated with BiOBr nanosheets by the SILAR method for photoelectrochemical sensing of H2O2

The design and construction of a photoelectrochemical (PEC) sensor with excellent photoelectric properties and good photoelectrocatalysis activity is significant for the effective detection of analytes. In this paper, based on a two-step anodic oxidation method and successive ionic layer adsorption (SILAR) method, a TiO2 nanotube array (TNT) photoelectrochemical sensor modified with BiOBr nanosheets was constructed and applied for the detection of H2O2 for the first time. The photocurrent of the photoelectrochemical sensor increases with the increase of the H2O2 concentration under the irradiation of an 8 W UV lamp. Excellent linearity was obtained in the concentration range from 10 nM to 100 μM with a low detection limit of 5 nM (S/N = 3). This excellent photoelectrochemical performance is due to the formation of a p-n heterojunction between BiOBr and TiO2 nanotube arrays, which provides efficient separation of charge carriers and accelerates electron transport. Moreover, it is applied to detect H2O2 in milk samples and it showed a good recovery result ranging from 95.73% to 105.65%, which provides a promising new strategy for the detection of H2O2.

Recent Advances in Chemical Sensors Using Porphyrin-Carbon Nanostructure Hybrid Materials

Porphyrins and carbon nanomaterials are among the most widely investigated and applied compounds, both offering multiple options to modulate their optical, electronic and magnetic properties by easy and well-established synthetic manipulations. Individually, they play a leading role in the development of efficient and robust chemical sensors, where they detect a plethora of analytes of practical relevance. But even more interesting, the merging of the peculiar features of these single components into hybrid nanostructures results in novel materials with amplified sensing properties exploitable in different application fields, covering the areas of health, food, environment and so on. In this contribution, we focused on recent examples reported in literature illustrating the integration of different carbon materials (i.e., graphene, nanotubes and carbon dots) and (metallo)porphyrins in heterostructures exploited in chemical sensors operating in liquid as well as gaseous phase, with particular focus on research performed in the last four years.

Porphyrins as Colorimetric and Photometric Biosensors in Modern Bioanalytical Systems

Advances in porphyrin chemistry have provided novel materials and exciting technologies for bioanalysis such as colorimetric sensor array (CSA), photo-electrochemical (PEC) biosensing, and nanocomposites as peroxidase mimetics for glucose detection. This review highlights selected recent advances in the construction of supramolecular assemblies based on the porphyrin macrocycle that provide recognition of various biologically important entities through the unique porphyrin properties associated with colorimetry, spectrophotometry, and photo-electrochemistry.

Intercalation of laminar Cu-Al LDHs with molecular TCPP(M) (M = Zn, Co, Ni, and Fe) towards high-performance CO2 hydrogenation catalysts

A confined space is broadly applied to enhance the dispersion and limit the aggregation of catalytically active sites, especially at high temperatures. In this work, we provided an efficient approach to immobilize transition metal ions (e.g., Zn2+, Co2+, Ni2+, and Fe2+) into the confined space of laminar Cu-Al layered double hydroxides (LDHs) using a range of molecular metalloporphyrins (viz., TCPP(M)) as shuttles. The deprotonated TCPP(M) not only provides nitrogen-based coordination sites to anchor a series of transition metal ions, but also intercalates and diffuses facilely into the interlayer gallery of LDHs by ion exchange. The obtained TCPP(M)@Cu-Al LDHs were then used as solid precursors for the fabrication of a series of heterogeneous catalysts for CO2 hydrogenation via high-temperature calcination. Two restriction forces contributed to the enhanced dispersion of the active species over the catalyst surface structures. Remarkably, the transition metals positioned within the confined space of LDHs significantly affected the catalytic performance of CO2 hydrogenation. Mainly CO, methanol, and methane were found as the C1 products, and their selectivities are highly dependent on the reaction intermediates, as suggested by the in situ DRIFTS study. Moreover, the designed catalysts fabricated via molecular TCPP(M) intercalation exhibited much better performance than the conventional catalysts derived from surface-supported CA-LDHs, due to their better metal dispersion and smaller particle size.

Investigations of the temperature-dependent electron paramagnetic resonance spectra and local structures for a cobalt(II) porphyrin complex within a metal-organic framework

The interaction between an adsorbed CO molecule and the unsaturated coordinated Co²⁺ center in the metal-organic framework (MOF) PCN-224 is investigated by analyzing the electron paramagnetic resonance (EPR) parameters (g factors and hyperfine structure constants) and the adsorption energies at various temperatures. Six- and five-coordinated octahedral models (four planar N with two and one axial CO molecules, respectively) are constructed to simulate the local structures of the Co²⁺ centers at different temperatures. Because of the Jahn-Teller effect of the Co²⁺ centers, the C₂-Co-N₄ and C-Co-N₄ combinations undergo different tetragonal elongation distortions along the C₄ axis, characterized by the relative elongation ΔZ and displacement ΔZ' of Co²⁺ at different temperatures. Given the agreement between the calculated and experimental EPR parameters, as well as the adsorption properties, the six- and five-coordinated models are regarded as suitable for low- and high-temperature systems, respectively. These studies may be helpful to understand the properties of similar MOFs with adsorbed molecules under the effect of ambient temperature.

Progress in research on gold nanoparticles in cancer management

INTRODUCTION

The rapid advancement of nanotechnology in recent years has fuelled burgeoning interest in the field of nanoparticle research, particularly its application in cancer management. At present, there seems to be heightened interest in the application of gold nanoparticles (AuNPs) to the management of cancer, encompassing diagnosis, monitoring, and treatment. AuNPs could be used as drug delivery agents that target cancer cells or in gene therapy. These efforts are undertaken in the hope of revolutionizing current methods and strategies for cancer treatment. This review will focus on the current applications of AuNPs in cancer management. OBJECTIVES, DATA SOURCES, STUDY APPRAISAL AND SYNTHESIS METHODS, RESULTS:: objectives, data sources, study eligibility criteria, participants, and interventions, study appraisal and synthesis methods, results are not required, as the study will be a literature review. Just introduction, ethics and dissemination, and conclusion are applicable.

ETHICS AND DISSEMINATION

Ethical approval and informed consent are not required, as the study is a literature review and does not involve direct contact with patients or alterations to patient care.

CONCLUSION

AuNPs have many properties that are of great value for the diagnosis and treatment of tumors. AuNPs are small in size and can penetrate widely and deposit on the tumor site, bind to many proteins and drugs, target delivery drugs, and have good biocompatibility. The application of AuNPs in the diagnosis and treatment of tumors is very considerable. In the near future, AuNPs will certainly play an important role in the treatment of tumors.