Electrochemical conversion of triamterene-diuretic drug to hydroxybenzene-triamterene intermediate mimicking the pharmacokinetic reaction on multiwalled carbon nanotube surface and its electrocatalytic oxidation function of thiol

Electrical Wiring of Malarial Parasite Intermediate Hematin on a Tailored N-Doped Carbon Nanomaterial Surface and Its Bioelectrocatalytic Hydrogen Peroxide Reduction and Sensing

Hematin, an iron-containing porphyrin compound, plays a crucial role in various biological processes, including oxygen transport, storage, and functionality of the malarial parasite. Specifically, hematin-Fe interacts with the nitrogen atom of antimalarial drugs, forming an intermediate step crucial for their function. The electron transfer functionality of hematin in biological systems has been scarcely investigated. In this study, we developed a biomimicking electrical wiring of hematin-Fe with a model N-drug system, represented as {hematin-Fe---N-drug}. We achieved this by immobilizing hematin on a multiwalled carbon nanotube (MWCNT)/N-graphene quantum dot (N-GQD) modified electrode (MWCNT/N-GQD@Hemat). N-GQD serves as a model molecular drug system containing nitrogen atoms to mimic the {hematin-Fe---N-drug} interaction. The prepared bioelectrode exhibited a distinct redox peak at a measured potential (E1/2) of -0.410 V vs Ag/AgCl, accompanied by a surface excess value of 3.54 × 10-9 mol cm-2. This observation contrasts significantly with the weak or electroinactive electrochemical responses documented in literature-based hematin systems. We performed a comprehensive set of physicochemical and electrochemical characterizations on the MWCNT/N-GQD@Hemat system, employing techniques including FESEM, TEM, Raman spectroscopy, IR spectroscopy, and AFM. To evaluate the biomimetic electrode's electroactivity, we investigated the selective-mediated reduction of H2O2 as a model system. As an important aspect of our research, we demonstrated the use of scanning electrochemical microscopy to visualize the in situ electron transfer reaction of the biomimicking electrode. In an independent study, we showed enzyme-less electrocatalytic reduction and selective electrocatalytic sensing of H2O2 with a detection limit of 319 nM. We achieved this using a batch injection analysis-coupled disposable screen-printed electrode system in physiological solution.

Electrochemical detection of triamterene in human urine using boron-doped diamond electrodes

Urine is one of the most used biological fluids for screening drug delivery and the resultant metabolites. In sports, the use of diuretics such as triamterene is considered a violation of anti-doping rules and is stipulated to be present at less than 79 nM in urine by the World Anti-Doping Agency (WADA). It is therefore important to develop effective rapid and low-cost tests for this diuretic. Here we apply electrochemical analysis using boron-doped diamond (BDD) electrodes, which have superior properties such as low background current, a wide potential window, and high resistance to deactivation. Since real urine samples show clear oxidation current peaks in the potential range more positive than 0.5 V (vs. Ag/AgCl) due to the presence of bio-components such as protein, uric acid, and ascorbic acid, to detect triamterene effectively, the electrochemical protocol was optimized towards a potential range where the other components have limited effect. Our results show that reduced triamterene exhibits an oxidation peak at 0.1 V (vs. Ag/AgCl) in 0.1 M phosphate buffer (PB) and at 0.2 V (vs. Ag/AgCl) in pooled human urine. The peak current value increased according to the triamterene concentration. The limit of detection (LOD) was 3.15 nM in the PB and 7.80 nM in pooled human urine. Finally, triamterene detection was attempted in individual urine samples. Triamterene was electrochemically detectable in individual urine samples, excluding urine samples containing an excess amount of ascorbic acid. The limit of detection (LOD) in individual urine samples was determined to be 20.8 nM.

Determination of dopamine based on a temperature-sensitive PMEO2MA and Au@rGO-MWCNT nanocomposite-modified electrode

First, the nanocomposite Au@rGO-MWCNT was synthesized by a hydrothermal method. Next, a temperature-controlled composite sensing film was prepared by composite modification of poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA) and Au@rGO-MWCNT on a glassy carbon electrode (GCE). This sensor was shown to exhibit good temperature sensitivity and reversibility to dopamine. When the testing temperature is lower than the lower critical solution temperature (LCST) of the polymer, the PMEO₂MA chain is in a stretched state, which increases the distance between the Au@rGO layers and leads to the inability of MWCNTs in one layer to contact another Au@rGO layer and to low conductivity. Therefore, in this state, dopamine cannot detect an electrochemical signal, and it is termed an "off" state. When the temperature is higher than the LCST of the polymer, the PMEO₂MA chain shrinks, allowing the MWCNTs to make contact with another layer of Au@rGO; the electron transfer rate of the modified film increases, and the electrochemical behavior of dopamine turns to an "on" state. Moreover, the sensor has a wide detection range (0.1 to 9.0 μM and 9.0 to 239.0 μM), and the limit of detection of dopamine is as low as 30 nM. This method has been successfully applied to the determination of dopamine in human serum samples. The on-off sensor provides a new avenue for the application of temperature-sensitive polymers.

π-Self-Assembly of a Coronene on Carbon Nanomaterial-Modified Electrode and Its Symmetrical Redox and H2O2 Electrocatalytic Reduction Functionalities

The structure-electroactivity relationship of graphene has been studied using coronene (Cor), polyaromatic hydrocarbon (PAH), and a subunit of graphene as a model system by chemically modified electrode approach. In general, graphene and PAH do not show any redox activity in their native form. Herein, we report a simple electrochemical approach for the conversion of electro-inactive coronene to a highly redox-active molecule (Cor-Redox; E°' = 0.235 ± 0.005 V vs Ag/AgCl) after being adsorbed on graphitic carbon nanomaterial and preconditioned at an applied potential, 1.2 V vs Ag/AgCl, wherein, the water molecule oxidizes to dioxygen via hydroxyl radical (^•OH) intermediate, in acidic solution (pH 2 KCl-HCl). When the same coronene electrochemical experiment was carried out on an unmodified glassy carbon electrode, there was no sign of faradic signal, revealing the unique electrochemical behavior of the coronene molecule on graphitic nanomaterial. The Cor-Redox peak is found to be highly symmetrical (peak-to-peak potential separation of ∼0 V tested by cyclic voltammetry (CV)) and surface-confined (Γ_Cor-Redox = 10.1 × 10^-9 mol cm^-2) and has proton-coupled electron-transfer (∂E°'/∂pH = -56 mV pH^-1) character. Initially, it was speculated that Cor is converted to a hydroxy group-functionalized Cor molecule (dihydroxy benzene derivative) on the graphitic surface and showed the electrochemical redox activity. However, physicochemical characterization studies including Raman, IR, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), redox-site selective oxidation probe, cysteine (for dihydroxy benzene), radical scavenger ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl, TEMPO), and scanning electrochemical microscopy (SECM) using ferricyanide redox couple have revealed that coronene cationic radical species like electroactive molecule is formed on graphitic material upon the electrochemical oxidation reaction at a high anodic potential. It has been proposed that ^•OH generated as an intermediate species from the water oxidation reaction is involved in the coronene cationic radical species. Studies on coronene electrochemical reaction at various carbon nanomaterials like multiwalled carbon, single-walled carbon, graphite, graphene oxide, and carbon nanofiber revealed that graphitic structure (without any oxygen functional groups) and its π-π bonding are key factors for the success of the electrochemical reaction. The coronene molecular redox peak showed an unusual electrocatalytic reduction of hydrogen peroxide similar to the peroxidase enzyme-biocatalyzed reduction reaction in physiological solution.